Search NASA⌕ Search

SEARCH · Search NASA

Results for “FIRE PROJECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Microphysics and Radiative Properties of Cirrus: Instrumentation and Analysis

This section summarizes the scientific questions which originated with participation in FIRE II in Coffeyville KA, evolved through participation in several field projects related to FIRE and culminated in participation in FIRE III in the Arctic in March / May 1998. It is noted that many of the ideas generated in FIRE II 1992 - 1995 and published under the grant involving the role of CCN in cirrus formation have been followed through in this grant and have also been central in the ideas for work under the SUCCESS project and the laboratory work currently supported by NSF.

Arnott, W. P.↗
NASA NTRS2017

Synergy Between Land Use and Climate Change Increases Future Fire Risk in Amazon Forests

Tropical forests have been a permanent feature of the Amazon basin for at least 55 million years, yet climate change and land use threaten the forest's future over the next century. Understory forest fires, which are common under the current climate in frontier forests, may accelerate Amazon forest losses from climate-driven dieback and deforestation. Far from land use frontiers, scarce fire ignitions and high moisture levels preclude significant burning, yet projected climate and land use changes may increase fire activity in these remote regions. Here, we used a fire model specifically parameterized for Amazon understory fires to examine the interactions between anthropogenic activities and climate under current and projected conditions. In a scenario of low mitigation efforts with substantial land use expansion and climate change – Representative Concentration Pathway (RCP) 8.5 – projected understory fires increase in frequency and duration, burning 4–28 times more forest in 2080–2100 than during 1990–2010. In contrast, active climate mitigation and land use contraction in RCP4.5 constrain the projected increase in fire activity to 0.9–5.4 times contemporary burned area. Importantly, if climate mitigation is not successful, land use contraction alone is very effective under low to moderate climate change, but does little to reduce fire activity under the most severe climate projections. These results underscore the potential for a fire-driven transformation of Amazon forests if recent regional policies for forest conservation are not paired with global efforts to mitigate climate change.

Le Page, Yannick↗
NASA NTRS1992

Satellite Analyses of Cirrus Cloud Properties During the FIRE Phase 2 Cirrus Intensive Field Observations over Kansas

The First ISCCP (International Satellite Cloud Climatology Project) Regional Experiment (FIRE) Phase II Intensive Field Observations (IFO) were taken over southeastern Kansas between November 13 and December 7,1991, to determine cirrus cloud properties. The observations include in situ microphysical data; surface, aircraft, and satellite remote sensing; and measurements of divergence over meso- and smaller-scale areas using wind profilers. Satellite remote sensing of cloud characteristics is an essential aspect for understanding and predicting the role of clouds in climate variations. The objectives of the satellite cloud analysis during FIRE are to validate cloud property retrievals, develop advanced methods for extracting cloud information from satellite-measured radiances, and provide multiscale cloud data for cloud process studies and for verification of cloud generation models. This paper presents the initial results of cloud property analyses during FIRE-II using Geostationary Operational Environmental Satellite (GOES) data and NOAA Advanced Very High Resolution Radiometer (AVHRR) radiances.

Minnis, Patrick↗
NASA NTRS2013

Guidelines of the Design of Electropyrotechnic Firing Circuit for Unmanned Flight and Ground Test Projects

The NASA Langley Research Center, Engineering Directorate, Electronic System Branch, is responsible for providing pyrotechnic support capabilities to Langley Research Center unmanned flight and ground test projects. These capabilities include device selection, procurement, testing, problem solving, firing system design, fabrication and testing; ground support equipment design, fabrication and testing; checkout procedures and procedure?s training to pyro technicians. This technical memorandum will serve as a guideline for the design, fabrication and testing of electropyrotechnic firing systems. The guidelines will discuss the entire process beginning with requirements definition and ending with development and execution.

Gonzalez, Guillermo A.↗
NASA NTRS2013

Large Scale Flame Spread Environmental Characterization Testing

Under the Advanced Exploration Systems (AES) Spacecraft Fire Safety Demonstration Project (SFSDP), as a risk mitigation activity in support of the development of a large-scale fire demonstration experiment in microgravity, flame-spread tests were conducted in normal gravity on thin, cellulose-based fuels in a sealed chamber. The primary objective of the tests was to measure pressure rise in a chamber as sample material, burning direction (upward/downward), total heat release, heat release rate, and heat loss mechanisms were varied between tests. A Design of Experiments (DOE) method was imposed to produce an array of tests from a fixed set of constraints and a coupled response model was developed. Supplementary tests were run without experimental design to additionally vary select parameters such as initial chamber pressure. The starting chamber pressure for each test was set below atmospheric to prevent chamber overpressure. Bottom ignition, or upward propagating burns, produced rapid acceleratory turbulent flame spread. Pressure rise in the chamber increases as the amount of fuel burned increases mainly because of the larger amount of heat generation and, to a much smaller extent, due to the increase in gaseous number of moles. Top ignition, or downward propagating burns, produced a steady flame spread with a very small flat flame across the burning edge. Steady-state pressure is achieved during downward flame spread as the pressure rises and plateaus. This indicates that the heat generation by the flame matches the heat loss to surroundings during the longer, slower downward burns. One heat loss mechanism included mounting a heat exchanger directly above the burning sample in the path of the plume to act as a heat sink and more efficiently dissipate the heat due to the combustion event. This proved an effective means for chamber overpressure mitigation for those tests producing the most total heat release and thusly was determined to be a feasible mitigation strategy to incorporate into the microgravity experiment.

Clayman, Lauren K.↗
NASA NTRS2013

Design and Development of Functionally Effective Human-Machine Interfaces for Firing Room Displays

This project involves creating software for support equipment used on the Space Launch System (SLS). The goal is to create applications and displays that will be used to remotely operate equipment from the firing room and will continue to support the SLS launch vehicle to the extent of its program. These displays include design practices that help to convey information effectively, such as minimizing distractions at normal operating state and displaying intentional distractions during a warning or alarm state. The general practice for creating an operator display is to reduce the detail of unimportant aspects of the display and promote focus on data and dynamic information. These practices include using minimalist design, using muted tones for background colors, using a standard font at a readable text size, displaying alarms visible for immediate attention, grouping data logically, and displaying data appropriately varying on the type of data. Users of these displays are more likely to stay focused on operating for longer periods by using design practices that reduce eye strain and fatigue. Effective operator displays will improve safety by reducing human errors during operation, which will help prevent catastrophic accidents. This report entails the details of my work on developing remote displays for the Hypergolic fuel servicing system. Before developing a prototype display, the design and requirements of the system are outlined and compiled into a document. Then each subsystem has schematic representations drawn that meet the specifications detailed in the document. The schematics are then used as the outline to create display representations of each subsystem. Each display is first tested individually. Then the displays are integrated with a prototype of the master system, and they are tested in a simulated environment then retested in the real environment. Extensive testing is important to ensure the displays function reliably as intended.

displays↗
NASA NTRS2013

Design and Development of Functionally Effective Human-Machine Interfaces for Firing Room Displays

This project involves creating software for support equipment used on the Space l aunch System (SLS). The goal is to create applications and displays that will be used to remotely operate equipment from the firing room and will continue to support the SLS launch vehicle to the extent of its program. These displays include design practices that help to convey information effectively, such as minimizing distractions at normal operating state and displaying intentional distractions during a warning or alarm state. The general practice for creating an operator display is to reduce the detail of unimportant aspects of the display and promote focus on data and dynamic information. These practices include using minimalist design, using muted tones for background colors, using a standard font at a readable text size, displaying alarms visible for Immediate attention, grouping data logically, and displaying data appropriately varying on the type of data. Users of these displays are more likely to stay focused on operating for longer periods by using design practices that reduce eye strain and fatigue. Effective operator displays will improve safety by reducing human errors during operation, which will help prevent catastrophic accidents. This report entails the details of my work on developing remote displays for the Hypergolics ground system. Before developing a prototype display, the design and requirements of the system are outlined and compiled into a document. Then each subsystem has schematic representations drawn tha.t meet the specifications detailed in the document. The schematics are then used as the outline to create display representations of each subsystem. Each display is first tested individually. Then the displays are integrated with a prototype of the master system, and they are tested in a simulated environment then retested in the real environment. Extensive testing is important to ensure the displays function reliably as intended.

Cho, Henry↗
NASA NTRS1990

Temperature sensitivity of Eppley broadband radiometers

Broadband radiometers manufactured by Eppley Laboratories Inc. are commonly used to measure irradiance from both ground-based and aircraft platforms. Namely, the pyranometer (Model PSP) measures irradiance in the .3 to 3.0 micron spectral region while the pyrgeometer (Model PIR) senses energy in the 4 to 50 micron region. The two instruments have a similar thermopile construction but different filters to achieve the appropriate spectral selection. During the fall of 1986, the First ISCCP (International Satellite Cloud Climatology Project) Regional Experiment (FIRE) commenced with the first cirrus Intensive Field Observation (IFO) conducted in Central Wisconsin. Due to the nature of this field project, pyranometers and pyrgeometers manufactured by Eppley were flown on NCAR's high altitude research aircraft, the Sabreliner. Inherent in the construction of these radiometers is temperature compensation circuitry designed to make the instrument sensitivity nominally constant over a temperature range from -20 to +40 C. Because the Sabreliner flew at high altitudes where temperatures were as cold as -70 C, it was necessary to determine the radiometers relative sensitivity to temperatures below -20 C and apply appropriate corrections to the FIRE radiation data set. A procedure to perform this calibration is outlined. It is meant to serve as a supplement to calibration procedures.

Smith, William L., Jr.↗
NASA NTRS1989

The 27-28 October 1986 FIRE IFO Cirrus case study: Comparison of radiative transfer theory with observations by satellite and aircraft

Observations of cirrus and altocumulus clouds during the First International Satellite Cloud Climatology Project Regional Experiment (FIRE) are compared to theoretical models of cloud radiative properties. Three tests are performed. First, LANDSAT radiances are used to compare the relationship between nadir reflectance ot 0.83 micron and beam emittance at 11.5 microns with that predicted for model calculations using spherical and nonspherical phase functions. Good agreement is found between observations and theory when water droplets dominate. Poor agreement is found when ice particles dominate, especially using scattering phase functions for spherical particles. Even when compared to a laboratory measured ice particle phase function, the observations show increased side scattered radiation relative to the theoretical calculations. Second, the anisotropy of conservatively scattered radiation is examined using simultaneous multiple angle views of the cirrus from LANDSAT and ER-2 aircraft radiometers. Observed anisotropy gives good agreement with theoretical calculations using the laboratory measured ice particle phase function and poor agreement with a spherical particle phase function. Third, Landsat radiances at 0.83, 1.65, and 2.21 microns are used to infer particle phase and particle size. For water droplets, good agreement is found with King Air FSSP particle probe measurements in the cloud. For ice particles, the LANDSAT radiance observations predict an effective radius of 60 microns versus aircraft observations of about 200 microns. It is suggested that this descrepancy may be explained by uncertainty in the imaginary index of ice and by inadequate measurements of small ice particles by microphysical probes.

Wielicki, Bruce A.↗
NASA NTRS1994

Microphysical modeling of cirrus. 1: Comparison with 1986 FIRE IFO measurements

We have used a one-dimensional model of cirrus formation to study the development of cirrus clouds during the 1986 First ISCCP (International Satellite Cloud Climatology Project) Regional Experiment (FIRE) intensive field observations (IFO). The cirrus model includes microphysical, dynamical, and radiative processes. Sulfate aerosols, solution drops, ice crystals, and water vapor are all treated as interactive elements in the model. Ice crystal size distributions are fully resolved based on calculations of homogeneous freezing nucleation, growth by water vapor deposition, evaporation, coagulation, and vertical transport. We have focused on the cirrus observed on November 1, 1986. Vertical wind speed for the one-dimensional simulation is taken from a mesoscale model simulation for the appropriate time period. The mesoscale model simulation suggested that strong upward motions over Wyoming and subsequent horizontal transport of upper level moisture were responsible for the cirrus observed over Wisconsin on this date. We assumed that our one-dimensional model could be used to represent a vertical column moving from Wyoming to Wisconsin over a period of several hours. Ice crystal nucleation occurs in our model in the 8 to 10-km region as a result of the strong updrafts (and cooling) early in the simulation. Growth, coagulation, and sedimentation of these ice crystals result in a broad cloud region (5-10 km thick) with an optical depth of 1-2 after a few hours, in agreement with the FIRE measurements. Comparison with aircraft microphysical measurements made over Wisconsin indicates that the simulation generated reasonable ice water content, but the predicted ice number densities are too low, especially for radii less than about 50 microns. Sensitivity tests suggest that better agreement between simulated and observed microphysical properties is achieved if the nucleation rate is higher or stronger vertical mixing (perhaps associated with multidimensional motions) is present.

Jensen, Eric J.↗
NASA NTRSDate not supplied

Preliminary Results from the Saffire VI Experiment

Preliminary results are presented for one test of the last flight of the Spacecraft Fire Experiment (Saffire VI) which was conducted on an orbiting Cygnus spacecraft. These experiments directly address the risks associated with our understanding of spacecraft fire behavior at practical length scales and geometries. The lack of this experimental data has forced spacecraft designers to base their designs and safety precautions on 1-g understanding of flame spread, flame self-extinguishment, fire detection, and suppression. The Saffire experiment was developed by an international team of investigators with the goal of addressing open issues in spacecraft fire safety. NASA’s Spacecraft Fire Safety Demonstration Project was formulated with the goal of conducting a series of large-scale experiments in spacecraft environments that represent practical spacecraft fires. These tests spanned 1.5 to 3.2 kW with free air volumes of 17 to 19 cubic meters. The final flight in the series of six experiments examined concurrent spread over large samples (all 41 cm wide) including a thin sheet of flammable fuel (cotton/fiberglass 50 cm long); 2-sided spread over 1 cm thick polymethyl methacrylate (PMMA) (18 cm long); 1-sided spread over 0.5 cm thick (18 cm long); and Nomex fabric (7 cm long). Results are presented for the PMMA samples, the SIBAL sample, and the thin cotton samples from Saffire IV and V. The flame heat release is determined and compared to the overall temperature rise in the spacecraft and the change in the concentration of carbon dioxide and carbon monoxide in the spacecraft. Overall, the temperature and pressure rise in the spacecraft were found to be less significant than the increase in carbon dioxide and carbon monoxide.

fire↗
NASA NTRSDate not supplied

Preliminary Results from the Saffire VI Experiment

The preliminary results are presented for one test of the last flight of the Spacecraft Fire Experiment (Saffire VI) which was conducted on an orbiting Cygnus spacecraft. These experiments directly address the risks associated with our understanding of spacecraft fire behavior at practical length scales and geometries. The lack of this experimental data has forced spacecraft designers to base their designs and safety precautions on 1-g understanding of flame spread, flame self-extinguishment, fire detection, and suppression. The Saffire experiment was developed by an international team of investigators with the goal of addressing open issues in spacecraft fire safety. NASA’s Spacecraft Fire Safety Demonstration Project was designed with the goal of conducting a series of large-scale experiments in spacecraft environments that represent practical spacecraft fires. The final flight examined concurrent spread over large samples (all 41 cm wide) including a thin sheet of flammable fuel (cotton/fiberglass 50 cm long); 2-sided spread over 1 cm thick polymethyl methacrylate (PMMA) (18 cm long) ; 1-sided spread over 0.5 cm thick (18 cm long); and Nomex fabric (7 cm long). This paper focusses on the two-sided PMMA sample. The flame heat release is determined and is compared to the overall temperature rise in the spacecraft and the change in the concentration of carbon dioxide and carbon monoxide in the spacecraft.

fire↗
NASA NTRSDate not supplied

NASA Update: Wildland Fire Element

As the NASA ESD, Applied Science Program, Associate Program Manager responsible for the agency's Wildland Fire Program portfolio, Vince Ambrosia manages and oversees NASA's participation in developments of Earth Observations capabilities supporting improved wildland fire management. The Wildland Fire Program has been subsumed within the ASP Disaster Program element and focuses on the NASA progress developments of the Group on Earth Observations (GEO) Global Wildfire Information System, where V. Ambrosia also serves as the GEO-GWIS NASA representative to the international panel. The NASA GWIS developments for the past year are highlighted in the briefing. In addition, other wildland fire-related NASA projects are also highlighted in this presentation, providing a context for the various successful developments and operationalization of Earth Observing systems data by partner entities and organizations involved in fire management.

Vince Ambrosia↗
NASA NTRS1993

Overview of microphysical and state parameter measurements from FIRE 2

In this article we present data collected by the NCAR King Air and Sabreliner aircraft in the FIRE 2 cirrus project over southeastern Kansas and northeastern Oklahoma in Nov. and Dec. of 1991. We present state parameter and microphysical measurements in summary form for the dates which have been selected by the FIRE Science Team for intensive analysis, 25 and 26 Nov. and 5 and 6 Dec. We will also evaluate the performance of 'key' aircraft instrumentation.

Heymsfield, Andrew J.↗
NASA NTRS2017

Historic Global Biomass Burning Emissions for CMIP6 (BB4CMIP) Based on Merging Satellite Observations with Proxies and Fire Models (1750-2015)

Fires have influenced atmospheric composition and climate since the rise of vascular plants, and satellite data has shown the overall global extent of fires. Our knowledge of historic fire emissions has progressively improved over the past decades due mostly to the development of new proxies and the improvement of fire models. Currently there is a suite of proxies including sedimentary charcoal records, measurements of fire-emitted trace gases and black carbon stored in ice and firn, and visibility observations. These proxies provide opportunities to extrapolate emissions estimates based on satellite data starting in 1997, but each proxy has strengths and weaknesses regarding, for example, the spatial and temporal extents over which they are representative. We developed a new historic biomass burning emissions dataset starting in 1750 that merges the satellite record with several existing proxies, and uses the average of six models from the Fire Model Intercomparison Project (FireMIP) protocol to estimate emissions when the available proxies had limited coverage. According to our approach, global biomass burning emissions were relatively constant with 10-year averages varying between 1.8 and 2.3 petagrams of carbon per year. Carbon emissions increased only slightly over the full time period and peaked during the 1990's after which they decreased gradually. There is substantial uncertainty in these estimates and patterns varied depending on choices regarding data representation, especially on regional scales. The observed pattern in fire carbon emissions is for a large part driven by African fires, which accounted for 58 percent of global fire carbon emissions. African fire emissions declined since about 1950 due to conversion of savanna to cropland, and this decrease is partially compensated for by increasing emissions in deforestation zones of South America and Asia. These global fire emissions estimates are mostly suited for global analyses and will be used in the Coupled Model Intercomparison Project Phase 6 (CMIP6) simulations.

Biomass burning; Satellite observations; computer ↗
NASA NTRSDate not supplied

Identifying Chemical and Optical Smoke Signatures in Suborbital Observations to Improve Model Projections

Biomass Burning (BB) fires are expected to occur more frequently in the future due to climate change, the build‐up of fuels due to fire suppression, and the expansion of the wildland‐urban interface [Schoennagel et al., 2017; Shivdenko & Schepaschenko, 2013; Stevens et al., 2014; Turner et al., 2019; Yue et al., 2015; Tilman et al., 2001]. Accurate knowledge of the abundance, distribution, and optical properties of absorbing aerosols such as BB smoke is essential to understanding regional and global aerosol radiative effects [Boucher et al., 2013]. It is recognized that differing fuel types (e.g., rice straw, ponderosa pine), combustion modes (i.e., flaming, smoldering or both) and temperature/ moisture content produce smoke with differing optical characteristics (e.g., aerosol light scattering and absorption) and component mixing ratios [e.g., BC, OC and inorganic species such as sulfate, potassium, chloride; Streets et al. 2003; Reid et al., 2005a, b; Janhäll et al., 2010; Sayer et al., 2014]. However, climate models often ascribe a fixed set of emission factors [i.e., amount of particulate for a given species released in the atmosphere per unit dry fuel burned; Darmenov and Dasilva, 2013] and optical properties [Hess et al., 1998] to all BB aerosol plumes, inherently limiting accurate representation of the global and regional heterogeneity of BB. The overarching goal of the proposed work is to improve the microphysical and optical representation of different types of Biomass Burning in Chemistry Transport Models. Our strategy is to capitalize on multiple airborne campaigns (e.g., ARCTAS, SEAC4RS, ORACLES, FIREX-AQ), which sampled different types of BB plumes at different aging stages. Models, when improved and combined with satellite, airborne, and ground observations will help address many aerosol science objectives from the NASA Decadal survey [National Academies of Sciences, Engineering, and Medicine. 2018].

Meloe Shenandoah F Kacenelenbogen↗