SEARCH · Search NASA

Results for “FLOW - CONFORMAL TRANSFORMATION - HODOGRAPH METHOD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1972

On the structure of hypersonic turbulent boundary layers.

Extensive hot-wire auto- and cross-correlation measurements obtained in a fully developed compressible turbulent boundary layer are presented. A tentative mechanism of turbulence production and growth in hypersonic flow suggested by these measurements is developed. This flow model is consistent with previous observations in incompressible flows. Detailed measurements of the mean properties of the hypersonic turbulent boundary layer are also presented and compared with results from various transformation and finite-difference prediction methods. It is shown that none of the theories predict all the properties of the hypersonic turbulent boundary layer and that additional measurements are needed to provide more adequate physics of turbulent processes for use in the various theories.

Owen, F. K.↗

NASA NTRS1958

Drag Minimization for Wings and Bodies in Supersonic Flow

The minimization of inviscid fluid drag is studied for aerodynamic shapes satisfying the conditions of linearized theory, and subject to imposed constraints on lift, pitching moment, base area, or volume. The problem is transformed to one of determining two-dimensional potential flows satisfying either Laplace's or Poisson's equations with boundary values fixed by the imposed conditions. A general method for determining integral relations between perturbation velocity components is developed. This analysis is not restricted in application to optimum cases; it may be used for any supersonic wing problem.

Heaslet, Max A↗

NASA NTRS1986

Migration of the separation point on a deforming cylinder

An iterative scheme of solving the Navier-Stokes equations for unsteady two-dimensional flow about a deforming and translating cylinder is given. In the kth iteration, the convected vorticity appears as the source term in an equation of transient diffusion of vorticity. A novel integral transform is used to reduce this transient vorticity equation to a k-dimensional heat equation. The bounded solution of this equation is obtained with a general method of superposition for problems involving a moving boundary. An equation describing the migration of the separation point on a deforming cylinder in unsteady cross flows is derived from the analytically obtained velocity field. The radial expansion of the cylinder surface is shown to hasten the separation time and to increase the separation angle. The results imply that in the steady flow past a body that is moving forward and sinking at constant rates, the locus of points at which the azimuthal component of skin friction changes sign originates on the leeward ray at a point downstream of the front tip.

Lin, S. P.↗

NASA NTRS1986

A computer code for three-dimensional incompressible flows using nonorthogonal body-fitted coordinate systems

In this report, a numerical method for solving the equations of motion of three-dimensional incompressible flows in nonorthogonal body-fitted coordinate (BFC) systems has been developed. The equations of motion are transformed to a generalized curvilinear coordinate system from which the transformed equations are discretized using finite difference approximations in the transformed domain. The hybrid scheme is used to approximate the convection terms in the governing equations. Solutions of the finite difference equations are obtained iteratively by using a pressure-velocity correction algorithm (SIMPLE-C). Numerical examples of two- and three-dimensional, laminar and turbulent flow problems are employed to evaluate the accuracy and efficiency of the present computer code. The user's guide and computer program listing of the present code are also included.

Chen, Y. S.↗

NASA NTRS1949

A Class of De Laval Nozzles

A study is made herein of the irrotational adiabatic motion of a gas in the transition from subsonic to supersonic velocities. A shape of the de Laval nozzle is given, which transforms a homogeneous plane-parallel flow at large subsonic velocity into a supersonic flow without any shockwaves beyond the transition line from the subsonic to the supersonic regions of flow. The method of solution is based on integration near the transition line of the gas equations of motion in the form investigated by S. A. Christianovich.

Falkovich, S. V.↗

NASA NTRS2008

Flow Solver for Incompressible 2-D Drive Cavity

This software solves the Navier-Stokes equations for the incompressible driven cavity flow problem. The code uses second-order finite differencing on a staggered grid using the Chorin projection method. The resulting intermediate Poisson equation is efficiently solved using the fast Fourier transform. Time stepping is done using fourth-order Runge-Kutta for stability at high Reynolds numbers. Features include check-pointing, periodic field snapshots, ongoing reporting of kinetic energy and changes between time steps, time histories at selected points, and optional streakline generation.

Kalb, Virginia L.↗

NASA NTRS1953

Effect of variable viscosity and thermal conductivity on high-speed slip flow between concentric cylinders

The differential equations of slip flow, including the Burnett terms, were first solved by Schamberg assuming that the coefficients of viscosity and heat conduction of the gas were constants. The problem is solved herein for variable coefficients of viscosity and thermal conductivity by applying a transformation leading to an iteration method. The method, starting with the solution for constant coefficients, enables one to approximate the solution for variable coefficients very closely after one or two steps. Satisfactory results are shown to follow from Schamberg's solution by using his values of the constant coefficients multiplied by a constant factor 'N', leading to what are denoted as the effective coefficients of viscosity and thermal conductivity.

RESEARCH TECHNIQUE, AERODYNAMICS↗

NASA NTRS1989

Semidiscrete Galerkin modelling of compressible viscous flow past a circular cone at incidence

A numerical study of the laminar and compressible boundary layer, about a circular cone in a supersonic free stream, is presented. It is thought that if accurate and efficient numerical schemes can be produced to solve the boundary layer equations, they can be joined to numerical codes that solve the inviscid outer flow. The combination of these numerical codes is competitive with the accurate, but computationally expensive, Navier-Stokes schemes. The primary goal is to develop a finite element method for the calculation of 3-D compressible laminar boundary layer about a yawed cone. The proposed method can, in principle, be extended to apply to the 3-D boundary layer of pointed bodies of arbitrary cross section. The 3-D boundary layer equations governing supersonic free stream flow about a cone are examined. The 3-D partial differential equations are reduced to 2-D integral equations by applying the Howarth, Mangler, Crocco transformations, a linear relation between viscosity, and a Blasius-type of similarity variable. This is equivalent to a Dorodnitsyn-type formulation. The reduced equations are independent of density and curvature effects, and resemble the weak form of the 2-D incompressible boundary layer equations in Cartesian coordinates. In addition the coordinate normal to the wall has been stretched, which reduces the gradients across the layer and provides high resolution near the surface. Utilizing the parabolic nature of the boundary layer equations, a finite element method is applied to the Dorodnitsyn formulation. The formulation is presented in a Petrov-Galerkin finite element form and discretized across the layer using linear interpolation functions. The finite element discretization yields a system of ordinary differential equations in the circumferential direction. The circumferential derivatives are solved by an implicit and noniterative finite difference marching scheme. Solutions are presented for a 15 deg half angle cone at angles of attack of 5 and 10 deg. The numerical solutions assume a laminar boundary layer with free stream Mach number of 7. Results include circumferential distribution of skin friction and surface heat transfer, and cross flow velocity distributions across the layer.

Meade, Andrew James, Jr.↗

NASA NTRS2005

Estimating Aeroheating of a 3D Body Using a 2D Flow Solver

A method for rapidly estimating the aeroheating, shear stress, and other properties of hypersonic flow about a three-dimensional (3D) blunt body has been devised. First, the geometry of the body is specified in Cartesian coordinates. The surface of the body is then described by its derivatives, coordinates, and principal curvatures. Next, previously relatively simple equations are used to find, for each desired combination of angle of attack and meridional angle, a scaling factor and the shape of an equivalent axisymmetric body. These factors and equivalent shapes are entered as inputs into a previously developed computer program that solves the two-dimensional (2D) equations of flow in a non-equilibrium viscous shock layer (VSL) about an axisymmetric body. The coordinates in the output of the VSL code are transformed back to the Cartesian coordinates of the 3D body, so that computed flow quantities can be registered with locations in the 3D flow field of interest. In tests in which the 3D bodies were elliptic paraboloids, the estimates obtained by use of this method were found to agree well with solutions of 3D, finite-rate-chemistry, thin-VSL equations for a catalytic body.

Scott, Carl D.↗

NASA NTRS1977

Liquid jet impingement normal to a disk in zero gravity

The free surface shapes of circular liquid jets impinging normal to sharp-edged disks in zero gravity are determined. Zero gravity drop tower experiments yielded three distinct flow patterns that were classified in terms of the relative effects of surface tension and inertial forces. An order of magnitude analysis was conducted that indicated regions where viscous forces were not significant in the computation of free surface shapes. The free surface analysis was simplified by transforming the governing potential flow equations and boundary conditions into the inverse plane, where the stream function and velocity potential became the coordinates. The resulting nonlinear equations were solved by standard finite difference methods, and comparisons were made with the experimental data for the inertia dominated regime.

Labus, T. L.↗

NASA NTRS1983

Transformation of two and three-dimensional regions by elliptic systems

Finite difference methods for composite grids were analyzed. It was observed that linear interpolation between grids would suffice only where low order accuracy was required. In the context of fluid flow, this would be in regions where the flow was essentially free stream. Higher order interpolation schemes were also investigated. The well known quadratic and cubic interpolating polynomials would increase the formal accuracy of the overall numerical algorithm. However, it can also be shown that the stability of the algorithm may be adversely affected. Further numerical results are needed in order to assess the nature of this instability induced by the interpolation procedure. Finally, error analysis and the order of difference expressions on general curvilinear coordinates are discussed.

Thompson, J. F.↗

NASA NTRS2012

Computational Optimization of a Natural Laminar Flow Experimental Wing Glove

Computational optimization of a natural laminar flow experimental wing glove that is mounted on a business jet is presented and discussed. The process of designing a laminar flow wing glove starts with creating a two-dimensional optimized airfoil and then lofting it into a three-dimensional wing glove section. The airfoil design process does not consider the three dimensional flow effects such as cross flow due wing sweep as well as engine and body interference. Therefore, once an initial glove geometry is created from the airfoil, the three dimensional wing glove has to be optimized to ensure that the desired extent of laminar flow is maintained over the entire glove. TRANAIR, a non-linear full potential solver with a coupled boundary layer code was used as the main tool in the design and optimization process of the three-dimensional glove shape. The optimization process uses the Class-Shape-Transformation method to perturb the geometry with geometric constraints that allow for a 2-in clearance from the main wing. The three-dimensional glove shape was optimized with the objective of having a spanwise uniform pressure distribution that matches the optimized two-dimensional pressure distribution as closely as possible. Results show that with the appropriate inputs, the optimizer is able to match the two dimensional pressure distributions practically across the entire span of the wing glove. This allows for the experiment to have a much higher probability of having a large extent of natural laminar flow in flight.

Hartshom, Fletcher↗

NASA NTRS1977

Numerical calculation of transonic flow past a swept wing by a finite volume method

The utility of numerical methods for predicting transonic flows over wings and bodies is well established. The computer program FLO22, based on a method presented earlier, has actually been widely used to calculate the aerodynamic performance of wings of transport aircraft. Provided that a correction is made for the displacement effect of the viscous boundary layer, this code has been found to give predictions which are accurate enough to serve as a useful design guide. The main disadvantages of the scheme used in FLO22 are the use of nonconservative difference formulas, which result in a failure to satisfy conservation of mass across shock waves, and the difficulty of finding suitable transformations of coordinates to permit the treatment of more complex geometric configurations. The method described here is an attempt to overcome these shortcomings, while retaining the successful features of the previous method. The basic idea is to use a discrete approximation which directly represents a balance of the mass flow through small volume elements. This leads to a relatively simple treatment of the potential flow equation in conservation form.

Jameson, A.↗

NASA NTRS1975

Inviscid interpenetration of two streams with unequal total pressures

A theory is proposed for analyzing the inviscid interpretation of two streams in the case when the difference in total pressure between the streams is relatively small. A stream is considered which discharges from a nozzle or reservoir into a partially moving and partially stationary environment in such a way that the flows leave the solid boundaries in a tangential direction where the two streams first interact. The problem is solved by expanding in a small parameter related to the difference in total pressure between the streams, the zeroth-order solution is obtained by classical methods, and a technique similar to that employed in thin-airfoil theory is used to transfer the first-order boundary conditions to the zeroth-order boundary. A procedure is developed to transform the problem into one that can be solved by standard techniques of the theory of sectionally analytic functions. Solutions are obtained for flows with and without free streamlines, and the general theory is applied to several specific flow configurations.

Goldstein, M. E.↗

NASA NTRS1978

A split-recoupled-semidirect computational technique applied to transonic flow over lifting airfoils

A new version of the semidirect iterative method eliminates significant restrictions of previous versions of the method. A semidirect method solves finite-difference equations by a rapid globally implicit iterative process driven by a fast direct elliptic solver. The new approach can treat complex systems of equations in an efficient 'correction form', and allows the use of general, nonorthogonal, boundary-fitted coordinate transformations. These features are expected to lead to significant practical applications with conservation-equation systems in either two or three dimensions. The present application to the full potential equations for steady transonic flow over an airfoil at angle of attack illustrates the utility of the technique.

Martin, E. D.↗

NASA NTRS1984

Rapid extraction of relative topography from Viking orbiter images. 2: Application to irregular topographic features

The ratio and flat field photoclinometric methods for determining crater form topography are described. Both methods compensate for the effects of atmospheric scattering by subtracting a haze value from all brightness values. Algorithms were altered to derive relative topographic data for irregular features such as ejecta blankets, lava flows, graben and ridge scarps, dune forms, and stratified materials. After the elevations along the profiles are obtained by integration of the photometric function, a matrix transformation is applied to the image coordinates of each pixel within each profile, utilizing each pixel's integral height, to produce a projection of each profile line onto the surface. Pixel brightness values are then resampled along the projected track of each profile to determine a more correct height value for each pixel. Precision of the methods is discussed.

Davis, P. A.↗

NASA NTRS1976

Numerical solution of supersonic three-dimensional free-mixing flows using the parabolic-elliptic Navier-Stokes equations

A numerical method is presented for solving the parabolic-elliptic Navier-Stokes equations. The solution procedure is applied to three-dimensional supersonic laminar jet flow issuing parallel with a supersonic free stream. A coordinate transformation is introduced which maps the boundaries at infinity into a finite computational domain in order to eliminate difficulties associated with the imposition of free-stream boundary conditions. Results are presented for an approximate circular jet, a square jet, varying aspect ratio rectangular jets, and interacting square jets. The solution behavior varies from axisymmetric to nearly two-dimensional in character. For cases where comparisons of the present results with those obtained from shear layer calculations could be made, agreement was good.

Hirsh, R. S.↗

NASA NTRS1982

Three-dimensional inviscid analysis of the scramjet inlet flow field

A computer code has been developed to analyze the inviscid flow field in a supersonic combustion ramjet (scramjet) inlet. The code uses the three-dimensional Euler equations in full conservation form to describe the inlet flow. An algebraic numerical coordinate transformation is used to generate a set of boundary-fitted curvilinear coordinates. The governing equations are solved by a time-asymptotic, unsplit, two-step, finite-difference method. This method is highly efficient on the vector processing computers for which the current code is written. Detailed results are presented for two scramjet inlet configurations over a range of Mach numbers. The calculated results are compared with the available experimental and theoretical results.

Kumar, A.↗