Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fermi level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Particle–Hole Asymmetry and the Pseudogap Phase of the High-TC Superconductors

In the pseudogap phase of the copper oxide superconductors, a significant portion of the Fermi surface is still gapped at temperatures above the superconducting transition temperature T{sub C}. Instead of a closed Fermi surface, the low-energy electronic excitations appear to form unconnected Fermi arcs separated by gapped regions. It is generally believed that the spectral function is particle-hole symmetric (at low energies) in both regions - with a peak at the Fermi level on the Fermi arcs and a local minimum at the Fermi level in the gapped regions. Here, using high resolution angle-resolved photoemission and new techniques of analysis, we show that on a sizable portion of the Fermi surface, the electronic structure in the immediate vicinity of the Fermi level is not particle-hole symmetric in the pseudogap phase. This is clear evidence that an alternative ground state competes with the superconductivity. The observations are also consistent with the possibility that the Fermi arcs are, in fact, the inner surface of the predicted Fermi pockets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Poole-Frenkel effect on electrical characterization of Al-doped ZnO films deposited on p-type GaN

This paper presents the electrical properties of Al-doped ZnO (AZO) films directly grown on two types of p-type GaN thin films. The low-pressure p-GaN thin films (LP-p-GaN) exhibited structural properties of high-density edge-type threading dislocations (TDs) and compensated defects (i.e., nitrogen vacancy). Compared with high-pressure p-GaN thin films (HP-p-GaN), X-ray photoemission spectroscopy of Ga 3d core levels indicated that the surface Fermi-level shifted toward the higher binding-energy side by approximately 0.7 eV. The high-density edge-type TDs and compensated defects enabled surface Fermi-level shifting above the intrinsic Fermi-level, causing the surface of LP-p-GaN thin films to invert to n-type semiconductor. A highly nonlinear increase in leakage current regarding reverse-bias voltage was observed for AZO/LP-p-GaN. The theoretical fits for the reverse-bias voltage region indicated that the field-assisted thermal ionization of carriers from defect associated traps, which is known as the Poole-Frenkel effect, dominated the I-V behavior of AZO/LP-p-GaN. The fitting result estimated the trap energy level at 0.62 eV below the conduction band edge. In addition, the optical band gap increased from 3.50 eV for as-deposited AZO films to 3.62 eV for 300 °C annealed AZO films because of the increased carrier concentration. The increasing Fermi-level of the 300 °C annealed AZO films enabled the carrier transport to move across the interface into the LP-p-GaN thin films without any thermal activated energy. Thus, the Ohmic behavior of AZO contact can be achieved directly on the low-pressure p-GaN films at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of electron correlation in Sr(Ca)Ru{sub 1-x}Cr{sub x}O{sub 3}: Density functional calculation

We have investigated the electronic structure of Sr(Ca)Ru{sub 1-x}Cr{sub x}O{sub 3} using the full potential linearized augmented plane wave method by different approximation such as LSDA and LSDA+U. The LSDA calculation suggest that Cr{sup 4+}-Ru{sup 4+} hybridization is responsible for the high Curie temperature T{sub C} in SrRu{sub 1-x}Cr{sub x}O{sub 3}, but it cannot completely describe its physical behavior. Our LSDA+U DOS results for SrRu{sub 1-x}Cr{sub x}O{sub 3} clearly establishes renormalization of the intra-atomic exchange strength at the Ru sites, arising from the Cr-Ru hybridization. The antiferromagnetic coupling of Cr{sup 3+} with Ru{sup 4+,5+} lattice increases the screening, which is consistent with the low magnetic moment of the Ru ions. The more distorted Ca-based compounds as compared to the Sr-based systems shows that the hybridization mechanism is not relevant for these compounds. The bigger exchange splitting of Ru 4d and Cr 3d at the Fermi level with Ru{sup 4+,5+} and Cr{sup 3+,4+} orbital occupancies of CaRu{sub 0.75}Cr{sub 0.25}O{sub 3} in the LSDA+U calculation, compared with that of the LSDA calculation, shows that repulsion between electrons tend to keep the localized spins from overlapping. The low screening of the Ru t{sub 2g} electrons increases T{sub C} in the Ca-based systems, which is consistent with the both high Ru exchange splitting and magnetic moment. The insulating behavior of the high Cr-doped systems can be explained by considering the Ru{sup 4+}+Cr{sup 4+{yields}}Ru{sup 5+}+Cr{sup 3+} charge transfer. - Graphical Abstract: We have investigated the electronic structure of Sr(Ca)Ru{sub 1-x}Cr{sub x}O{sub 3} using different ab-initio calculation such as LSDA and LSDA+U approximation. The antiferromagnetic hybridization of Cr{sup 3+} with Ru{sup 4+,5+} lattice increases the screening, which is consistent with the low magnetic moment of the Ru ions. The LSDA+U calculation for the more distorted Cr impurity doped Ca-based ruthenate compounds as compared to the Sr-based systems shows repulsion between electrons, which tends to keep the localized spins from overlapping.

36 MATERIALS SCIENCE↗

Ternary rare-earth bismuthides RE{sub 5}SiBi{sub 2} and RE{sub 5}GeBi{sub 2} (RE=La-Nd, Gd-Er): Stabilization of the {beta}-Yb{sub 5}Sb{sub 3}-type structure through tetrel substitution

Ternary bismuthides RE{sub 5}TtBi{sub 2} containing rare-earth (RE=La-Nd, Gd-Er) and tetrel (Tt=Si, Ge) atoms have been prepared by arc-melting of the elements followed by annealing at 800 {sup o}C. They adopt the {beta}-Yb{sub 5}Sb{sub 3}-type structure (Pearson symbol oP32, space group Pnma, Z=4), as revealed through analysis by single-crystal X-ray diffraction on Ce{sub 5}Si{sub 0.869(4)}Bi{sub 2.131(4)} and powder X-ray diffraction on Ce{sub 5}GeBi{sub 2}. Cell parameters for the entire series lie in the ranges of a=12.8-11.8 A, b=9.6-9.0 A, and c=8.4-7.9 A. Solid solubility in Ce{sub 5}Si{sub x}Bi{sub 3-x} and Pr{sub 5}Si{sub x}Bi{sub 3-x} (approximately 0.9{<=}x{<=}1.2, depending on the RE member) is much more limited compared to the antimonides, consistent with a highly ordered structure in which the two possible anion sites are essentially segregated into a smaller one occupied by Tt atoms (CN7) and a larger one occupied by Bi atoms (CN9). Band structure calculations on La{sub 5}SiBi{sub 2} confirm the importance of La-La bonding interactions near the Fermi level. X-ray photoelectron spectra support the presence of partially anionic Bi atoms, as indicated by a small negative binding energy shift relative to elemental Bi. The Ce and Pr members undergo magnetic transitions at low temperatures, possibly involving ferromagnetic interactions, that are strongly influenced by the nature of the Tt atom. -- Graphical Abstract: Tetrel (Si or Ge) and Bi atoms are arranged in an ordered manner in the {beta}-Yb{sub 5}Sb{sub 3}-type structure adopted by RE{sub 5}TtBi{sub 2}. Display Omitted

36 MATERIALS SCIENCE↗

Crystal and electronic structures of CaAl{sub 2}Si{sub 2}-type rare-earth copper zinc phosphides RECuZnP{sub 2} (RE=Pr, Nd, Gd-Tm, Lu)

The quaternary rare-earth phosphides RECuZnP{sub 2} (RE=Pr, Nd, Gd-Tm, Lu) have been prepared by reaction of the elements at 900 {sup o}C, completing this versatile series which forms for nearly all RE metals. They adopt the trigonal CaAl{sub 2}Si{sub 2}-type structure (Pearson symbol hP5, space group P3-bar m1, Z=1), as confirmed by single-crystal X-ray diffraction analysis on ErCuZnP{sub 2} and powder X-ray diffraction analysis on the remaining members. The Cu and Zn atoms are assumed to be disordered over the single transition-metal site. Band structure calculations on a hypothetically ordered YCuZnP{sub 2} model suggest a semimetal, with a zero band gap between the valence and conduction bands. This electronic structure is supported by XPS valence band spectra for RECuZnP{sub 2} (RE=Gd-Er), in which the intensity drops off smoothly at the Fermi edge. The absence of a band gap permits the electron count to deviate from the precise value of 16 e{sup -} per formula unit, as demonstrated by the formation of a solid solution in GdCu{sub x}Zn{sub 2-x}P{sub 2} (1.0{<=}x{<=}1.3), while still retaining the CaAl{sub 2}Si{sub 2}-type structure. Because the Cu 2p XPS spectra indicate that the Cu atoms are always monovalent, the substitution of Cu for Zn leads to a decrease in electron count and a lowering of the Fermi level in the valence band. The magnetic susceptibility of RECuZnP{sub 2} (RE=Gd-Er), which obeys the Curie-Weiss law, confirms the presence of trivalent RE atoms. -- Graphical abstract: The absence of a band gap in the semimetallic quaternary rare-earth phosphides RECuZnP{sub 2} permits the formation of a solid solution such as GdCu{sub x}Zn{sub 2-x}P{sub 2} through hole-doping of the valence band. Display Omitted

36 MATERIALS SCIENCE↗

Thermoelectric, electronic, optical and chemical bonding properties of Ba{sub 2}PrRuO{sub 6}: At temperature 7 K and 150 K

Highlights: • DFT-FPLAPW method used for calculating the electronic structure. • The Fermi surface of BPRO (7 K and 150 K) is also calculated. • The complex dielectric function has been calculated. • Thermoelectric properties were also calculated using BoltzTraP code. • Power factor shows that both compounds are good thermoelectric materials at 600 K. - Abstract: We present first principles calculations of the band structure, density of states, electronic charge density, Fermi surface and optical properties of Ba{sub 2}PrRuO{sub 6} single crystals at two different temperatures. The atomic positions were optimized by minimizing the forces acting on the atoms. We have employed the full potential linear augmented plane wave method within local density approximation, generalized gradient approximation and Engel–Vosko generalized gradient approximation to treat the exchange correlation potential. The calculation shows that the compound is superconductor with strong hybridization near the Fermi energy level. Fermi surface is composed of two sheets. The calculated electronic specific heat capacities indicate, very close agreement with the experimental one. The bonding features of the compounds are analyzed using the electronic charge density in the (1 0 0) and (0–10) crystallographic planes. The dispersion of the optical constants was calculated and discussed. The thermoelectric properties are also calculated using the BoltzTrap code.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlating the structural, chemical, and optical properties at nanometer resolution

Valence electron spectroscopic imaging (VESI) techniques, taking advantages of the energy-losses suffered by inelastic scattering of the fast electrons in the transmission electron microscope, offer an inherently high spatial resolution to characterize the electronic structure of materials close to the Fermi level. Here we demonstrate that the combination of an electron monochromator and a highly dispersive imaging energy filter, which has become available only recently, allows reliable measurements of local bandgaps on the nanometer scale. In addition, the correlations of structural, chemical, and optical properties can be revealed via VESI using monochromated electrons with a high spatial resolution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mo incorporation in WO{sub 3} thin film photoanodes: Tailoring the electronic structure for photoelectrochemical hydrogen production

The electronic surface structure of Mo-incorporated WO{sub 3} (''WO{sub 3}:Mo'') is investigated using direct and inverse photoemission and compared to that of pure (Mo-free) WO{sub 3}. The films are found to be n-type with an electronic surface band gap of 3.27 (+-0.15) eV. The conduction band minimum (valence band maximum) is 0.64 (+-0.10) eV above [2.63 (+-0.10) eV below] the Fermi level and at most 0.38 (+-0.11) eV above the H{sup +}/H{sub 2} reduction potential [at least 1.66 (+-0.11) eV below the H{sub 2}O/O{sub 2} oxidation potential]. The findings suggest an explanation why WO{sub 3}:Mo/WO{sub 3} bilayer structures show improved photoelectrochemical performance compared to respective single layer photoanodes.

36 MATERIALS SCIENCE↗

W-doped anatase TiO{sub 2} transparent conductive oxide films: Theory and experiment

W-doped anatase TiO{sub 2} films were deposited on glass substrate by magnetron cosputtering. The minimum resistivity, 1.5x10{sup -2} {Omega} cm, for Ti{sub 1-x}W{sub x}O{sub 2} film (x=0.063) was obtained. X-ray photoelectron spectroscopy analysis shows W incorporated in the Ti lattice position is mostly in the W{sup 6+} state. Theoretical calculations based upon the density-functional theory were applied to analyze the electronic structure and conducting mechanism. The strong hybridization of Ti 3d states with W 5d states is the dominate factor to cause the shifting in Fermi level into conduction band. Our results suggest that tungsten is a favorable dopant to form TiO{sub 2}-based transparent conducting oxide materials.

36 MATERIALS SCIENCE↗

Permanent optical doping of amorphous metal oxide semiconductors by deep ultraviolet irradiation at room temperature

We report an investigation of two photon ultraviolet (UV) irradiation induced permanent n-type doping of amorphous InGaZnO (a-IGZO) at room temperature. The photoinduced excess electrons were donated to change the Fermi-level to a conduction band edge under the UV irradiation, owing to the hole scavenging process at the oxide interface. The use of optically n-doped a-IGZO channel increased the carrier density to approx10{sup 18} cm{sup -3} from the background level of 10{sup 16} cm{sup -3}, as well as the comprehensive enhancement upon UV irradiation of a-IGZO thin film transistor parameters, such as an on-off current ratio at approx10{sup 8} and field-effect mobility at 22.7 cm{sup 2}/V s.

36 MATERIALS SCIENCE↗

Synthesis and thermoelectric properties of RuO{sub 2} nanorods

We have explored the effect of the O/Ru ratio on the morphology and the Seebeck coefficient of RuO{sub 2} nanorods (space group P4{sub 2}/mnm) synthesized by reactive sputtering. At an O/Ru ratio of 1.69, a faceted surface is observed, while nanorod formation occurs at O/Ru ratios of 2.03 and 2.24. Using classical molecular dynamics with the potential parameters derived in this work, we show that volatile species enable nanorod formation. Based on ab initio calculations, two effects of the nanorod formation on the Seebeck coefficient are observed: (i) increase due to additional states in the vicinity of the Fermi level and (ii) decrease due to oxygen point defects (volatile species). These two competing effects give rise to a moderate increase in the Seebeck coefficient upon nanorod formation.

36 MATERIALS SCIENCE↗

Crystallographic, magnetic, and electronic structures of ferromagnetic shape memory alloys Ni{sub 2}XGa (X=Mn,Fe,Co) from first-principles calculations

The crystallographic, magnetic and electronic structures of the ferromagnetic shape memory alloys Ni{sub 2}XGa (X=Mn, Fe, and Co), are systematically investigated by means of the first-principles calculations within the framework of density functional theory using the VIENNA AB INITIO SOFTWARE PACKAGE. The lattice parameters of both austenitic and martensitic phases in Ni{sub 2}MnGa have been calculated. The formation energies of the cubic phase of Ni{sub 2}XGa are estimated, and show a destabilization tendency if Mn atom is substituted by Fe or Co. From Ni{sub 2}MnGa to Ni{sub 2}CoGa, the down spin total density of states (DOS) at Fermi level is gradually increasing, whereas that of the up spin part remains almost unchanged. This is the main origin of the difference of the magnetic moment in these alloys. The partial DOS is dominated by the Ni and Mn 3d states in the bonding region below E{sub F}. There are two bond types existing in Ni{sub 2}XGa: one is between neighboring Ni atoms in Ni{sub 2}MnGa; the other is between Ni and X atoms in Ni{sub 2}FeGa and Ni{sub 2}CoGa alloys.

36 MATERIALS SCIENCE↗

A synchrotron-based photoemission study of the MoO{sub 3}/Co interface

The electronic structures at the MoO{sub 3}/Co interface were investigated using synchrotron-based ultraviolet and x-ray photoelectron spectroscopy. It was found that interfacial chemical reactions lead to the reduction of Mo oxidation states and the formation of Co-O bonds. These interfacial chemical reactions also induce a large interface dipole, which significantly increases the work function of the cobalt substrate. In addition, two interface states located at 1.0 and 2.0 eV below the Fermi level are identified. These two states overlap at film thickness of between 2-4 nm, which suggests the MoO{sub 3} intermediate layer may facilitate ohmic charge transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles calculations of phase transition, elastic modulus, and superconductivity under pressure for zirconium

The elasticity, dynamic properties, and superconductivity of {alpha}, {omega}, and {beta} Zr upon compression are investigated by using first-principles methods. Our calculated elastic constants, elastic moduli, and Debye temperatures of {alpha} and {omega} phases are in excellent agreement with experiments. Electron-phonon coupling constant {lambda} and electronic density of states at the Fermi level N (E{sub F}) are found to increase with pressure for these two hexagonal structures. For cubic {beta} phase, the critical pressure for mechanical stability is predicted to be 3.13 GPa and at P = 4 GPa the low elastic modulus (E=31.97 GPa) can be obtained. Besides, the critical pressure for dynamic stability of {beta} phase is achieved by phonon dispersion calculations to be {approx}26 GPa. Over this pressure, {lambda} and N (E{sub F}) of {beta} phase decrease upon further compression. Our calculations show that the large value of superconducting transition temperature T{sub c} at 30 GPa for {beta} Zr is mainly due to the TA1 soft mode. Under further compression, the soft vibrational mode will gradually fade away.

36 MATERIALS SCIENCE↗

Effect of In Additive in the Density of Defect States in a-Se{sub 85}Te{sub 15} and a-Se{sub 75}Te{sub 25} Thin Films

In this paper we report the effect of In incorporation in the density of defect states of two binary Se-Te glassy systems. For this purpose, we have chosen here two well known and well studied a-Se{sub 85}Te{sub 15} and a-Se{sub 75}Te{sub 25} glassy alloys. The d. c. conductivity measurements at high electric fields in vacuum evaporated amorphous thin films of Se{sub 85}Te{sub 15}, Se{sub 75}Te{sub 15}In{sub 10} and Se{sub 75}Te{sub 25}, glassy alloys have been made. Current-Voltage (I-V) Characteristics have been measured at various fixed temperatures. In these samples, at low electric fields, ohmic behavior is observed. However, at high electric fields (E{approx}10{sup 4} V/cm), non-ohmic behavior is observed. An analysis of the experimental data confirms the presence of space charge limited conduction (SCLC) in the glassy materials studied in the present case. From the fitting of the data to the theory of SCLC, the density of defect states (DOS) near Fermi level is calculated. The peculiar role of third element In as an impurity in the pure binary Se{sub 75}Te{sub 25} and Se{sub 85}Te{sub 15} glassy alloys is also discussed in terms of electronegativity difference.

36 MATERIALS SCIENCE↗

Valence band structure of the icosahedral Ag-In-Yb quasicrystal

The valence band structure of the icosahedral (i) Ag-In-Yb quasicrystal, which is isostructural to the binary i-Cd-Yb system, is investigated by ultraviolet photoemission spectroscopy (UPS). Experimental results are compared with electronic-structure calculations of a cubic approximant of the same phase. UPS spectra from the fivefold, threefold, and twofold i-Ag-In-Yb surfaces reveal that the valence band near to the Fermi level is dominated by Yb 4f-derived states, in agreement with calculations. The spectra also exhibit peaks which are surface core level shifted, caused by changes in the electronic structure in surface layers. Calculations yield a pseudogap in the density of states due to a hybridization of the Yb 5d band with the Ag 5p and In 5p bands. Both experimental and calculated band features are very similar to those of Cd-Yb. The modification of the band structure after surface treatment by sputtering and by oxidation is also studied. Additionally, the work function of i-Ag-In-Yb measured from the width of UPS spectrum is found to be almost unaffected by surface orientation, but increases after sputtering or oxidation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic transport in biphenyl single-molecule junctions with carbon nanotubes electrodes: The role of molecular conformation and chirality

We investigate, by means of ab initio calculations, electronic transport in molecular junctions composed of a biphenyl molecule attached to metallic carbon nanotubes. We find that the conductance is proportional to cos{sup 2} {theta}, with {theta} the angle between phenyl rings, when the Fermi level of the contacts lies within the frontier molecular orbitals energy gap. This result, which agrees with experiments in biphenyl junctions with nonorganic contacts, suggests that the cos{sup 2} {theta} law has a more general applicability, irrespective of the nature of the electrodes. We calculate the geometrical degree of chirality of the junction, which only depends on the atomic positions, and demonstrate that it is not only proportional to cos{sup 2} {theta} but also is strongly correlated with the current through the system. These results indicate that molecular conformation plays the preponderant role in determining transport properties of biphenyl-carbon nanotubes molecular junctions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface-site-selective study of valence electronic states of a clean Si(111)-7x7 surface using Si L{sub 23}VV Auger electron and Si 2p photoelectron coincidence measurements

Valence electronic states of a clean Si(111)-7x7 surface are investigated in a surface-site-selective way using high-resolution coincidence measurements of Si pVV Auger electrons and Si 2p photoelectrons. The Si L{sub 23}VV Auger electron spectra measured in coincidence with energy-selected Si 2p photoelectrons show that the valence band at the highest density of states in the vicinity of the rest atoms is shifted by {approx}0.95 eV toward the Fermi level (E{sub F}) relative to that in the vicinity of the pedestal atoms (atoms directly bonded to the adatoms). The valence-band maximum in the vicinity of the rest atoms, on the other hand, is shown to be shifted by {approx}0.53 eV toward E{sub F} relative to that in the vicinity of the pedestal atoms. The Si 2p photoelectron spectra of Si(111)-7x7 measured in coincidence with energy-selected Si L{sub 23}VV Auger electrons identify the topmost surface components, and suggest that the dimers and the rest atoms are negatively charged while the pedestal atoms are positively charged. Furthermore, the Si 2p-Si L{sub 23}VV photoelectron Auger coincidence spectroscopy directly verifies that the adatom Si 2p component (usually denoted by C{sub 3}) is correlated with the surface state just below E{sub F} (usually denoted by S{sub 1}), as has been observed in previous angle-resolved photoelectron spectroscopy studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗