Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flat surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Selection of remote sensing techniques - Surface roughness information from 3 cm wavelength SLAR images

The value of SLAR (Side-Looking Airborne Radar) image data for detecting and measuring small-scale surface roughness is examined, using as an example the Cottonball Basin in Death Valley National Monument, California. The SLAR image was obtained by an X-band (3 cm wavelength) synthetic aperture radar system operated at an altitude of 10,732 m above sea level. The polarization of the transmitted and received signals was horizontal. Film density values were used to produce color hypsometric maps of small-scale surface irregularities. It is shown that semi-quantitative surface roughness information, from uniquely flat surfaces such as the Cottonball Basin, can be obtained by analysis of 3 cm wavelength SLAR images calibrated by limited field measurements. Quantitative roughness data could be obtained with proper consideration of modifying surface and radar system parameters.

Schaber, G. G.↗
NASA NTRS1951

Investigation of Fretting by Microscopic Observation

An experimental investigation, using microscopic observation and color motion photomicrographs of the action, was conducted to determine the cause of fretting. Glass and other noncorrosive materials, as well as metals, were used as specimens. A very simple apparatus vibrated convex surfaces in contact with stationary flat surfaces at frequencies of 120 cycles or less than l cycle per second, an amplitude of 0.0001 inch, and load of 0.2 pound.

Godfrey, Douglas↗
NASA NTRS1950

Preliminary Investigation of Fretting

An experimental investigation, using microscopic observation and color motion photomicrographs of the action, was conducted to determine the cause of fretting. Glass and other noncorrosive materials, as well as metals, were used as specimens. A very simple apparatus vibrated convex surfaces in contact with stationary flat surfaces at frequencies of 120 cycles or less than one cycle per second, an amplitude of 0.001 inch, and a load of 0.2 pound. The observations and analysis led to the conclusions that fretting was initiated by the loosening, due to the inherent adhesive forces, of finely divided and apparently virgin material, and that its initiation is independent of vibratory motion or high sliding speeds. The fretting of platinum, glass, quartz, ruby, and mica relegated the role of oxidation as a cause to that of a secondary factor. Fretting occurred to clean nonmetals and metals readily, and glass microscope slides and steel balls provide excellent method for visual studies. Video run time 9:54, color and sound (mp4). Available for download for best viewing. Document indicated in video is related in the repository and can also be downloaded for use at https://ntrs.nasa.gov/citations/19930083206.

fretting↗
DOE OSTI2026

Interplay of Quantum Size Effect and Tensile Strain on Surface Morphology of β-Sn(100) Islands

The quantum size effect (QSE) and strain effect are two key factors influencing the surface morphology of thin films, which can increase film surface roughness through QSE-induced thickness oscillation and strain-induced island formation, respectively. Surface roughness usually manifests in the early stages of film growth and diminishes beyond a critical thickness. In this work, we employ molecular beam epitaxy (MBE) to grow β-Sn(100) islands with varying thickness N on bilayer graphene-terminated 6H-SiC(0001) substrates. Scanning tunneling microscopy and spectroscopy measurements reveal an inverse surface roughness effect that highlights the interplay of QSE and misfit strain in shaping the surface morphology of β-Sn(100) islands. For N ≤ 10, the islands exhibit flat surfaces, while for N ≥ 26, the island surfaces become corrugated and patterned. For the intermediate range, i.e., 12 ≤ N ≤ 24, both flat and patterned surfaces coexist, with the percentage coverage of the patterned surface oscillating as a function of N. By performing density functional theory calculations, we demonstrate that the unusual surface pattern evolution in our MBE-grown β-Sn(100) islands is a result of the interplay between QSE-induced surface roughing and tensile strain-induced smoothening effect.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Active Dendrite Suppression by Ferroelectric Membrane Separators in Rechargeable Batteries

Anodic dendrite formation is a critical issue in rechargeable batteries and often leads to poor cycling stability and quick capacity loss. Prevailing strategies for dendrite suppression aim at slowing down the growth rate kinetically but still leaving possibilities for dendrite evolution over time. Herein, we report a complete dendrite elimination strategy using a mesoporous ferroelectric polymer membrane as the battery separator. The dendrite suppression is realized by spontaneously reversing the surface energetics for metal ion reduction at the protrusion front, where a positive piezoelectric polarization is generated and superimposed as the protrusion compresses the separator. This effect is demonstrated first in a Zn electroplating process, and further in Zn–Zn symmetric cells and Zn–NaV 3 O 8 ·1.5H 2 O full cells, where the dendritic Zn anode surfaces are completely turned into featureless flat surfaces. Consequently, a substantially longer charging/discharging cycle is achieved. Furthermore, this study provides a promising pathway toward high-performance dendrite-free rechargeable batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Spatio-Kinetic Electronic Heterogeneity in MoS 2 Revealed by Ultrafast Electron Microscopy: Implications for Optoelectronics

There is broad interest in layered, two-dimensional (2D) semiconductors owing to their high optical absorption and ability to heterogeneously integrate with various substrates. In such layered semiconductors, mesoscopic imperfections, such as surface step edges, may affect charge carrier kinetics and device performance, but studying their effects on carrier transport with sufficient spatial and temporal resolution is a challenge. Using scanning ultrafast electron microscopy, we image the near-surface charge carrier kinetics with μm/ps spatiotemporal resolution in single-crystal MoS 2 samples with surface steps tens of nanometers in height. We find an approximately 3-fold increase in surface trap density near such surface steps compared to the uniform, flat surface regions. Despite the difference in trap state density, filling of the traps occurs over the same time scale (∼100 ps), but carrier recovery is much slower near the step compared to the uniform regions of the material. Furthermore, these results provide an approach to measure ultrafast dynamics and determine the required uniformity of layered materials depending on the speed limit constraints for specific applications.

SEM↗
DOE OSTI2026

Imaging surface topography with coherent x-ray reflectivity: Theory, kinematics, and simulations

A theoretical formalism is described for understanding coherent x-ray reflectivity (CXR) from the surface of a semi-infinite crystal having a variable surface topography, described by the height profile ℎ(𝑥,𝑦). The surface topography is imaged as a complex “effective density,” obtained from the phasing and inversion of the coherent x-ray reflectivity data, measured through a rocking scan centered at a vertical momentum transfer 𝑄$^{0}_{𝑧}$ and a vertical range Δ⁢𝑄 𝑧 . The formalism predicts that the effective density has an amplitude with a maximum located at the surface height for each position within the surface plane. The phase of the effective density has a lateral variation that is controlled by the surface height and a vertical variation that reflects a combination of the interfacial structure and specific choice of measurement conditions. This understanding enables direct observation of nanometer-scale interfacial topography, i.e., ℎ⁡(𝑥,𝑦)⁢𝑐 𝑠 (where 𝑐 𝑠 is the vertical substrate lattice parameter) with Å-scale sensitivity to surface height. Numerical simulations illustrate and confirm the theoretical results. These results show how the interpretation of the interfacial density phase obtained by CXR data inversion (i.e., surface topography with respect to a flat surface) is conceptually similar to that previously known for Bragg coherent diffraction imaging (BCDI) measurements of isolated nanoparticles (i.e., lattice displacements with respect to an ideal crystal lattice). This suggests that CXR can be thought of as a form of dark field imaging with respect to the bright field BCDI approach. An implication of these results is that interfacial imaging may bypass some of the significant challenges associated with BCDI imaging of multiple particles having different orientations.

X-ray imaging↗
NASA NTRS2009

NASA Tech Briefs, December 2009

Topics include: A Deep Space Network Portable Radio Science Receiver; Detecting Phase Boundaries in Hard-Sphere Suspensions; Low-Complexity Lossless and Near-Lossless Data Compression Technique for Multispectral Imagery; Very-Long-Distance Remote Hearing and Vibrometry; Using GPS to Detect Imminent Tsunamis; Stream Flow Prediction by Remote Sensing and Genetic Programming; Pilotless Frame Synchronization Using LDPC Code Constraints; Radiometer on a Chip; Measuring Luminescence Lifetime With Help of a DSP; Modulation Based on Probability Density Functions; Ku Telemetry Modulator for Suborbital Vehicles; Photonic Links for High-Performance Arraying of Antennas; Reconfigurable, Bi-Directional Flexfet Level Shifter for Low-Power, Rad-Hard Integration; Hardware-Efficient Monitoring of I/O Signals; Video System for Viewing From a Remote or Windowless Cockpit; Spacesuit Data Display and Management System; IEEE 1394 Hub With Fault Containment; Compact, Miniature MMIC Receiver Modules for an MMIC Array Spectrograph; Waveguide Transition for Submillimeter-Wave MMICs; Magnetic-Field-Tunable Superconducting Rectifier; Bonded Invar Clip Removal Using Foil Heaters; Fabricating Radial Groove Gratings Using Projection Photolithography; Gratings Fabricated on Flat Surfaces and Reproduced on Non-Flat Substrates; Method for Measuring the Volume-Scattering Function of Water; Method of Heating a Foam-Based Catalyst Bed; Small Deflection Energy Analyzer for Energy and Angular Distributions; Polymeric Bladder for Storing Liquid Oxygen; Pyrotechnic Simulator/Stray-Voltage Detector; Inventions Utilizing Microfluidics and Colloidal Particles; RuO2 Thermometer for Ultra-Low Temperatures; Ultra-Compact, High-Resolution LADAR System for 3D Imaging; Dual-Channel Multi-Purpose Telescope; Objective Lens Optimized for Wavefront Delivery, Pupil Imaging, and Pupil Ghosting; CMOS Camera Array With Onboard Memory; Quickly Approximating the Distance Between Two Objects; Processing Images of Craters for Spacecraft Navigation; Adaptive Morphological Feature-Based Object Classifier for a Color Imaging System; Rover Slip Validation and Prediction Algorithm; Safety and Quality Training Simulator; Supply-Chain Optimization Template; Algorithm for Computing Particle/Surface Interactions; Cryogenic Pupil Alignment Test Architecture for Aberrated Pupil Images; and Thermal Transport Model for Heat Sink Design.

Source record↗
DOE OSTI2021

Friction reduction for engine components

The present invention relates to techniques for lowering friction between moving surfaces of, for example, an internal combustion engine. Friction reduction is achieved by adding texture modifications to surfaces that come in contact with each other. Texture modifications that reduce friction in accordance with the present invention include dimples of varying geometries and depths ion the surfaces of components. The present invention also relates to the fabrication technique for applying the texture to the surfaces. In another embodiment, the patterned soft mask is applied onto a large surface (flat or curved including cylindrical rollers surfaces) to be followed by electrochemical etching to imprint the textures onto the component And, in another embodiment, a diamond-like-carbon (DLC) film may be applied to the turbine component to also reduce friction.

Hsu, Stephen M.↗
DOE OSTI2022

Simple Approximation for the Ideal Reference State of Gases Adsorbed on Solid-State Surfaces

Reference states are useful as models for facilitating calculations of equilibrium constants, and they may also serve as standard states that are convenient for organizing and tabulating thermodynamic data; however, standard state conventions and appropriate reference states for adsorbed species have received less attention than those for pure substances and solutes. Here, we compare seven choices of reference states for calculations of equilibrium constants and transition state theory rate constants for flat surfaces, in particular (1) an ideal 2D harmonic oscillator, (2) an ideal rigid-molecule harmonic oscillator, (3) an ideal 2D harmonic oscillator with separable surface modes, (4) a 2D ideal gas, (5) an ideal 2D hindered translator, (6) an ideal 2D hindered translator with lowest-order barriers, and (7) a simple ideal 2D hindered translator proposed in this work. The advantage of models 5–7 is that they can treat both mobile and localized adsorbates in a consistent way, whereas models 1–3 are only appropriate for localized adsorbates, and model 4 is only appropriate for a freely translating adsorbate. Furthermore, models 6 and 7 reduce the computational cost without the user having to calculate barrier heights for diffusion. An advantage of the simple ideal 2D hindered translator is that it has a physical high-temperature limit. We also propose a reference state for nonflat surfaces. Here, the user is encouraged to choose a reference state based on the appropriateness of the model and the practicality of the calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The Critical Stack Pressure to Alter Void Generation at Li/Solid-Electrolyte Interfaces during Stripping

The lithium stripping process generates vacancies, which may accumulate as voids and lead to uneven current distribution and dendrite growth in the following plating cycles. A stack pressure is typically required during stripping, but how to optimize the stack pressure is not clear. In this work, extremely lithiophilic Li/Li 2 O and lithiophobic Li/LiF interfaces were used to reveal the combining effect of interface interaction and stack pressure induced lithium creep on the stripping critical current density (CCD). A multiscale simulation scheme with Density Functional Theory (DFT), kinetic Monte Carlo (KMC) simulations, and an analytical model was developed. The analytical model predicted lithiophobic interfaces require a higher stack pressure than lithiophilic interfaces to reach the same CCD. The KMC simulations also showed higher stack pressure is needed at lithiophobic interfaces to accelerate Li vacancy diffusion into the bulk and maintain a flat surface. This stack pressure needs to be high enough to alter the Li forward-and-backward hopping barriers at the interface. This multiscale simulation scheme illustrates the importance to include the chemical-mechanical effects during Li stripping morphology evolution. It can be used to design ideal interlayer coating materials to maintain a flat Li surface during cycling.

25 ENERGY STORAGE↗
NASA NTRS2008

Optimization of Neutral Atom Imagers

The interactions between plasma structures and neutral atom populations in interplanetary space can be effectively studied with energetic neutral atom imagers. For neutral atoms with energies less than 1 keV, the most efficient detection method that preserves direction and energy information is conversion to negative ions on surfaces. We have examined a variety of surface materials and conversion geometries in order to identify the factors that determine conversion efficiency. For chemically and physically stable surfaces smoothness is of primary importance while properties such as work function have no obvious correlation to conversion efficiency. For the noble metals, tungsten, silicon, and graphite with comparable smoothness, conversion efficiency varies by a factor of two to three. We have also examined the way in which surface conversion efficiency varies with the angle of incidence of the neutral atom and have found that the highest efficiencies are obtained at angles of incidence greater then 80deg. The conversion efficiency of silicon, tungsten and graphite were examined most closely and the energy dependent variation of conversion efficiency measured over a range of incident angles. We have also developed methods for micromachining silicon in order to reduce the volume to surface area over that of a single flat surface and have been able to reduce volume to surface area ratios by up to a factor of 60. With smooth micro-machined surfaces of the optimum geometry, conversion efficiencies can be increased by an order of magnitude over instruments like LENA on the IMAGE spacecraft without increase the instruments mass or volume.

Shappirio, M.↗
NASA NTRS2020

Percussion Mechanism for the Mars2020 Coring Drill

The Mars2020 rover includes a Sampling & Caching Subsystem (SCS) that is required to acquire core samples of hard rocks and to abrade rocky surfaces flat and smooth in order to facilitate surface science. Hard, high strength rocks exhibit brittle failure modes, and can be drilled and chiseled efficiently using percussive impacts. The coring drill percussion mechanism was designed to provide those impacts with variable output force and to be used with various drill bits. A unique hammering mechanism, using a base-driven hammer, powered by a conventional rotary actuator driving a Scotch yoke, was designed to robustly provide the required function in a Martian environment for a life exceeding 2 million impacts.

Chrystal, Kyle↗
NASA NTRS1989

Helicopter hub fairing and pylon interference drag

A wind tunnel test was conducted to study the aerodynamics of helicopter hub and pylon fairings. The test was conducted in the 7-by 10 Foot Subsonic Wind Tunnel (Number 2) at Ames Research Center using a 1/5-scale XH-59A fuselage model. The primary focus of the test was on the rotor hub fairing and pylon mutual interference drag. Parametric studies of pylon and hub fairing geometry were also conducted. This report presents the major findings of the test as well as tabulated force and moment data, flow visualization photographs, and graphical presentations of the drag data. The test results indicate that substantial drag reduction can be attained through the use of a cambered hub fairing with circular arc upper surface and flat lower surface. Furthermore, a considerable portion of the overall drag reduction is attributed to the reduction in the hub-on-pylon interference drag. It is also observed that the lower surface curvature of the fairing has a strong influence on the hub fairing and on pylon interference drag. However, the drag reduction benefit that was obtained by using the cambered hub fairing with a flat lower surface was adversely affected by the clearance between the hub fairing and the pylon.

Graham, D. R.↗