Search NASA⌕ Search

SEARCH · Search NASA

Results for “Floating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Suppression of Marangoni Convection in Float Zones

The basic purpose of this program is to demonstrate by means of an Earth-based 1-g experiment that the undesirable Marangoni (surface tension) convection can be suppressed or significantly reduced by means of gas jets directed tangentially to the free surface of the liquid in a float zone. These jets will establish the tangential shear stress field over the surface which must be adjusted to equal the counter-stress resultant of the Marangoni shear stress which causes the convection. For proposed materials processing in space (o-g), particularly of important, highly reactive semiconductor materials, e.g., silicon, microgravity will virtually eliminate the unwanted thermal-buoyancy convection in the liquid silicon, but will have no effect in reducing the Marangoni convection. Unless this can be sufficiently suppressed by other means, there may be no significant advantages to the proposed space processing of reactive semiconductors. Although some inert gas such as argon must be used for the corrosive liquid silicon, the Earth-based experiment uses air jets and various transparent oils, since the basic principle involved is the same. The first float zone is enclosed in a very small rectangular box with a quasi-planar free surface. Stable Marangoni convection has been achieved and velocities measured photographically. The air jet system with variable velocity and temperature is under construction. Three independent parameters must be optimized to attain maximum suppression: the gas velocity, angle of attack, and gas temperature.

Dressler, R. F.↗
NASA NTRS1986

Analytical and numerical studies of the thermocapillary flow in a uniformly floating zone

The microgravity environment of an orbiting vehicle permits crystal growth experiments in the presence of greatly reduced buoyant convection in the liquid melt. Crystals grown in ground-based laboratories do not achieve their potential properties because of dopant variations caused by flow in the melt. The floating zone crystal growing system is widely used to produce crystals of silicon and other materials. However, in this system the temperature gradient on the free sidewall surface of the melt is the source of a thermocapillary flow which does not disappear in the low-gravity environment. The idea of using a uniform rotation of the floating zone system to confine the thermocapillary flow to the melt sidewall leaving the interior of the melt passive is examined. A cylinder of fluid with an axial temperature gradient imposed on the cylindrical sidewall is considered. A half zone and the linearized, axisymmetric flow in the absence of crystal growth is examined. Rotation is found to confine the linear thermocapillary flow. A simplified model is extended to a full zone and both linear and nonlinear thermocapillary flows are studied theoretically. Analytical and numerical methods are used for the linear flows and numerical methods for the nonlinear flows. It was found that the linear flows in the full zone have more complicated and thicker boundary layer structures than in the half zone, and that these flows are also confined by the rotation. However, for the simplified model considered and for realistic values for silicon, the thermocapillary flow is not linear. The fully nonlinear flow is strong and unsteady (a weak oscillation is present) and it penetrates the interior. Some non-rotating flow results are also presented. Since silicon as a large value of thermal conductivity, one would expect the temperature fields to be determined by conduction alone. This is true for the linear and weakly nonlinear flows, but for the stronger nonlinear flow the results show that temperature advection is also important. Uniform rotation may still be a means of confining the flow and the results obtained define the procedure to be used to examine this hypothesis.

Fowlis, W. W.↗
NASA NTRS1987

Crystal Growth in Liquid-Encapsulated Float Zone

Suitably chosen liquid encapsulant placed around melt zone in float-zone crystal-growth system performs four important functions enhancing purity and reducing strains and dislocations in final crystal. In new technique, grow dislocation-free crystals with precisely controlled composition even from materials not amenable to conventional float-zone crystal-growth method. Support provided by encapsulant make it practical to process materials of low surface tension.

Naumann, Robert J.↗
NASA NTRS1987

Performance of FORTRAN floating-point operations on the Flex/32 multicomputer

A series of experiments has been run to examine the floating-point performance of FORTRAN programs on the Flex/32 (Trademark) computer. The experiments are described, and the timing results are presented. The time required to execute a floating-point operation is found to vary considerbaly depending on a number of factors. One factor of particular interest from an algorithm design standpoint is the difference in speed between common memory accesses and local memory accesses. Common memory accesses were found to be slower, and guidelines are given for determinig when it may be cost effective to copy data from common to local memory.

Crockett, Thomas W.↗
NASA NTRS1987

Analysis and design of a gas-lubricated, sectored, floating ring seal

Helium buffered floating-ring seals used in cryogenic turbopumps are subject to large temperature variations, shaft centrifugal growth, and dynamic shaft excursions. To prevent dangerous contact friction over a wide range of operating conditions generally requires liberal clearances with consequent high leakage. Reduction of helium consumption translates into lower space vehicle helium storage requirements and thus increased payload. A hydrostatic sectored floating-ring seal is described with self-adjusting clearance capabilities that enables the seal to operate with small clearances over the operating range to minimize leakage.

Shapiro, W.↗
NASA NTRS1988

Non-contaminating method to reduce Marangoni convection in microgravity float zones

A ground-based experiment has validated the effectiveness of a noncontaminating method developed to reduce Marangoni (thermal capillary) convection in float-zone processing of corrosive materials in space microgravity. A drop of silicone oil 1.5 mm high was enclosed in a transparent box, and the small size of the drop was shown to suppress the 1-g thermal-buoyant convection. A vertical jet of air was blown tangentially over a vertical free surface, producing a viscous shear drag which opposes the Marangoni surface shear. A 66 percent reduction in Marangoni velocities was found in the lowest one-third of the drop, corresponding to the resolidification surface in a float-zone melt.

Dressler, R. F.↗
NASA NTRS1988

Multiple valued floating potentials of Langmuir probes

It is shown that Langmuir probes can have three different floating potentials in plasmas produced by a hot filament discharge in a multi-dipole device when the primary and secondary electron currents are comparable. The measured floating potential depends on the probe's initial condition - the most negative and the least negative potentials are found to be stable and the in-between value is found to be unstable. Results are compared to a simple theoretical model.

Nam, Cheol-Hee↗
NASA NTRS1990

Free float acceleration measurements aboard NASA's KC-135 Microgravity Research Aircraft

A three-axis accelerometer subsystem, developed as part of a get-away-special Ga-As crystal growth system for the Space Shuttle, is described. Each axis of this subsystem contains a quartz flexure accelerometer capable of dc measurements, custom-designed measurement circuitry, a programmable microcomputer for measurement control and data reduction, and memory for recording data. The subsystem was flown as a free float experiment aboard the NASA KC-135 microgravity research aircraft, yielding measurements of accelerations during free float at a resolution of 10 micro-g.

Bellows, A. H.↗
NASA NTRS1990

The effects of g-jitter and surface tension induced convection on float zones

The effects of g-jitter on nonencapsulated and encapsulated liquid bridges were investigated numerically, using fluid characteristics and parameters from three fluid systems: a silicone oil bridge, a methanol bridge, and a silicon melt. Results showed that complex flow patterns can arise in g-jitter environment which significantly modify the heat-transfer characteristics of the system. It was found that the nonencapsulated liquid bridges and float zone melts were dominated by surface-tension driven convection, with very little impact on the flows by residual and g-jitter accelerations. Zone encapsulation resulted in a sizeable drop in the maximum fluid velocities. The g-jitter computations on the encapsulated float zones resulted in significant augmentation of the maximum velocities and heat transfer, with the silicon melt being the least sensitive to g-jitter acceleration.

Ramachandran, N.↗
NASA NTRS1990

Free-floating experiments in orbiter and space station

Manned spacecraft will never be free of acceleration perturbations due to necessary motions of crewmembers. However, in most cases, the perturbations can be minimized or even isolated from sensitive experiments when required. The principal disturbances and methods of isolation are described. As the crew moves about the spacecraft, no external forces are applied and the average acceleration remains near zero. External force will be exerted when jets are fired for spacecraft attitude control or translation, and these must be transferred to the microgravity experiments. Transitory acceleration and vibration are produced by crew and equipment. The most significant on Orbiter have been wall push-offs used for body translation within the spacecraft, the exercise conducted on a treadmill within the middeck area, closing doors of stowage compartments and the vibration of some machinery, such as a sample centrifuge. For short periods of perhaps a few minutes, crew and equipment motion can be largely inhibited, but not for much longer intervals. It may be necessary to mount especially sensitive experiments on an isolation table, which can greatly reduce the acceleration transferred to the experiment. Either weak mechanical springs or, even better, a computer-controlled electromagnetic suspension can be used to effectively insulate the table from vibration at frequencies above about 0.01 Hz. Another option is to free-float an experiment table within the spacecraft. All of the above-mentioned perturbations can be eliminated for some minutes if the entire experiment package is allowed to free-float within the spacecraft until a wall contact is made. Package acceleration levels should be maintainable below 10(exp -8) g sub o in this way.

Garriott, Owen K.↗
NASA NTRS1991

Internally mounted thin-liquid-film skin-friction meter - Comparison with floating element method with and without pressure gradient

A new, robust oil film skin friction meter was designed and constructed. This enables skin friction measurements remotely and from within the model, as well as avoiding the need to know the location of the leading edge of the film. The instrument was tested by comparing measurements with those given by a floating element gage in a zero pressure gradient flat plate turbulent boundary layer. Both instruments agreed satisfactorily with the well-known curve for this case. Significant discrepancies between the two instruments were observed in the case of adverse and favorable pressure gradients. The discrepancies were of opposite sign for opposite-sign pressure gradients as is consistent with the error expected from floating-element gages. Additional confidence in the oil film technique is supplied by the good agreement of the behavior of the film profile with predictions from lubrication theory.

Hornung, Hans↗
NASA NTRS1990

Morphological instability in a float zone

This paper examines the morphological instability of the freezing interface of the float zone in a crystal sheet for which the height of the liquid zone L = Lf + Lm (where Lf and Lm are the planar positions of the solidifying and melting interfaces) is smaller than the width and the thickness of the sheet. The Lf and Lm positions are calculated, and basic state concentration profiles are determined for a planar interfacial system. A linear stability analysis of this system is performed showing that the growth rate of disturbances is a modified version of the growth rate for a directional solidification system. It was found that shorter melt zone configurations are less susceptible to long wavelength morphological instability, indicating that, to suppress morphological instability in a float zone system, it is necessary to decrease the liquid zone height.

Humphreys, Laura B.↗
NASA NTRS1990

A half-zone study of Marangoni convection in floating-zone crystal growth under microgravity

Floating-zone crystal growth under microgravity, though free from natural convection, can still be susceptible to Marangoni convection. The use of a ring heater in contact with most of the surface of the melt zone, has recently been considered as one way of reducing Marangoni convection in the melt zone. In order to study Marangoni convection in the melt zone in this modified floating-zone crystal growth process, a half-zone system was adopted. Computer simulation and direct observation of Marangoni convection in the half-zone system were carried out for two different cases. In the first case, the surface of the melt zone was completely free, while in the second it was mostly in contact with a quartz ring. The results of computer simulation and direct observation both indicated that in the second case Marangoni convection was significantly reduced near the melt/solid interface as well as in the bulk melt.

Lan, C. W.↗
NASA NTRS1991

On the nature of control algorithms for free-floating space manipulators

It is suggested that nearly any control algorithm that can be used for fixed-based manipulators also can be employed in the control of free-floating space manipulator systems, with the additional conditions of estimating or measuring a spacecraft's orientation and of avoiding dynamic singularities. This result is based on the structural similarities between the kinematic and dynamic equations for the same manipulator but with a fixed base. Barycenters are used to formulate the kinematic and dynamic equations of free-floating space manipulators. A control algorithm for a space manipulator system is designed to demonstrate the value of the analysis.

Papadopoulos, Evangelos↗
NASA NTRS1992

Numerical simulations of inductive-heated float-zone growth

The present work provides an improved fluid flow and heat-transfer modeling of float-zone growth by introducing a RF heating model so that an ad hoc heating temperature profile is not necessary. Numerical simulations were carried out to study the high-temperature float-zone growth of titanium carbide single crystal. The numerical results showed that the thermocapillary convection occurring inside the molten zone tends to increase the convexity of the melt-crystal interface and decrease the maximum temperature of the molten zone, while the natural convection tends to reduce the stability of the molten zone by increasing its height. It was found that the increase of induced heating due to the increase of applied RF voltage is reduced by the decrease of zone diameter. Surface tension plays an important role in controlling the amount of induced heating. Finally, a comparison of the computed shape of the free surface with a digital image obtained during a growth run showed adequate agreement.

Chan, Y. T.↗
NASA NTRS1990

Accurate GPS measurement of the location and orientation of a floating platform

This article describes the design and initial tests of the GPS portion of a system for making seafloor geodesy measurements. In the planned system, GPS antennas on a floating platform will be used to measure the location of an acoustic transducer, attached below the platform, which interrogates an array of transponders on the seafloor. Since the GPS antennas are necessarily some distance above the transducer, a short-baseline GPS interferometer consisting of three antennas is used to measure the platform's orientation. A preliminary test of several crucial elements of the system was performed. The test involved a fixed antenna on the pier and a second antenna floating on a buoy about 80 m away. GPS measurements of the vertical component of this baseline, analyzed independently by two groups using different software, agree with each other and with an independent measurement within a centimeter. The first test of an integrated GPS/acoustic system took place in the Santa Cruz Basin off the coast of southern California in May 1990. In this test a much larger buoy, designed and built at SIO, was equipped with three GPS antennas and an acoustic transducer that interrogated a transponder on the ocean floor. Preliminary analysis indicates that the horizontal position of the transponder can be determined with a precision of about a centimeter.

Purcell, G. H., Jr.↗
NASA NTRS1930

The Effect of Wing Tip Floating Ailerons on the Autorotation of a Monoplane Wing Model

The preliminary tests described here were made to determine the extent to which wing tip floating ailerons might be effective in reducing airplane spinning tendencies. The tests showed that initial spinning tendencies and rates of stable spinning could doubtless be reduced by the use of tip floating ailerons on an airplane. It also appears to be desirable to reduce to a minimum the interference between wing and aileron. This would serve to maintain uniformity of action at all angles of attack and enable calculation of the aileron characteristics.

Knight, Montgomery↗
NASA NTRS1939

Hydrodynamic and Aerodynamic Tests of a Family of Models of Seaplane Floats with Varying Angles of Dead Rise - N.A.C.A. Models 57-A, 57-B, and 57-C

Three models of V-bottom floats for twin-float seaplanes (N.A.C.A. models 57-A, 57-B, and 57-C) having angles of dead rise of 20 degrees, 25 degrees, and thirty degrees, respectively, were tested in the N.A.C.A. tank and in the N.A.C.A. 7- by 10-foot wind tunnel. Within the range investigated, the effect of angle of dead rise on water resistance was found to be negligible at speeds up to and including the hump speed, and water resistance was found to increase with angle of dead rise at planing speeds. The height of the spray at the hump speed decreased with increase in angle of dead rise and the aerodynamic drag increased with dead rise. Lengthening the forebody of model 57-B decreased the water resistance and the spray at speeds below the hump speed. Spray strips provided an effective means for the control of spray with the straight V sections used in the series but considerably increased the aerodynamic drag. Charts for the determination of the water resistance and the static properties of the model with 25 degrees dead rise and for the aerodynamic drag of all the models are included for use in design.

Parkinson, John B↗