Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ford”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Studies of Accreting Neutron Stars with RXTE Cycle 4 Observations: III: TOO Observations of Atoll Sources

NASA Grant NAG 5-9244 provided funds for the research projects 'ASM-Triggered TOO Observations of Kilohertz Oscillations in Five Atoll Sources' and 'Further Measurements of the Kilohertz Oscillations in 4U 1705-44' approved under the Rossi X-ray Timing Explorer (RXTE) Guest Observer Program Cycle 4 and funded under the 1999 NASA Astrophysics Data Program. The principal investigator of the observing time proposals was Dr. E. C. Ford (U. of Amsterdam). The grant was funded for one year beginning 3/15/2000. The original ADP proposal was submitted by Prof. Jan van Paradijs, who passed away in 1999 before the funds were distributed. Prof. Wilham S. Padesas administered the grant during the period of performance. In spite of a wealth of observational data on the kHz QPO in low-mass X-ray binaries (LMXBs), the interpretation of this phenomenon is currently uncertain because the pairs of kHz QPO peaks and the oscillations seen in some Type I X-ray bursts are almost, but not quite, connected by a simple beat frequency relation. Further systematic studies of systems with known QPOs are required in order to better understand the phenomenon. The proposals were intended to contribute to a solution to this confusion by observing the sources as they vary over a wide range of X-ray flux. RXTE target-of-opportunity observations of six transient atoll sources, 4U 0614+09, KS 1732-260, Ser X-1, 4U 1702-42, 4U 1820-30 and 4U 1705-44 were to be performed at various flux levels based on ASM measurements.

Paciesas, William S.↗
NASA NTRS2004

SDM Virtualness Project

In the summer of 2001, NASA and Ford Motor Company co-sponsored a research project aimed at improving the education process and application of lessons learned through distant education. The System Design & Management Program (SDM) was used as a laboratory for improving distance learning capabilities. The research project was a follow up to previous research on globally dispersed teams.

Lim, Christopher Yit-Seong↗
NASA NTRS2005

Evaluation of shoulder integrity in space: first report of musculoskeletal US on the International Space Station

Investigative procedures were approved by Henry Ford Human Investigation Committee and NASA Johnson Space Center Committee for Protection of Human Subjects. Informed consent was obtained. Authors evaluated ability of nonphysician crewmember to obtain diagnostic-quality musculoskeletal ultrasonographic (US) data of the shoulder by following a just-in-time training algorithm and using real-time remote guidance aboard the International Space Station (ISS). ISS Expedition-9 crewmembers attended a 2.5-hour didactic and hands-on US training session 4 months before launch. Aboard the ISS, they completed a 1-hour computer-based Onboard Proficiency Enhancement program 7 days before examination. Crewmembers did not receive specific training in shoulder anatomy or shoulder US techniques. Evaluation of astronaut shoulder integrity was done by using a Human Research Facility US system. Crew used special positioning techniques for subject and operator to facilitate US in microgravity environment. Common anatomic reference points aided initial probe placement. Real-time US video of shoulder was transmitted to remote experienced sonologists in Telescience Center at Johnson Space Center. Probe manipulation and equipment adjustments were guided with verbal commands from remote sonologists to astronaut operators to complete rotator cuff evaluation. Comprehensive US of crewmember's shoulder included transverse and longitudinal images of biceps and supraspinatus tendons and articular cartilage surface. Total examination time required to guide astronaut operator to acquire necessary images was approximately 15 minutes. Multiple arm and probe positions were used to acquire dynamic video images that were of excellent quality to allow evaluation of shoulder integrity. Postsession download and analysis of high-fidelity US images collected onboard demonstrated additional anatomic detail that could be used to exclude subtle injury. Musculoskeletal US can be performed in space by minimally trained operators by using remote guidance. This technique can be used to evaluate shoulder integrity in symptomatic crewmembers after strenuous extravehicular activities or to monitor microgravity-associated changes in musculoskeletal anatomy. Just-in-time training, combined with remote experienced physician guidance, may provide a useful approach to complex medical tasks performed by nonexperienced personnel in a variety of remote settings, including current and future space programs. (c) RSNA, 2004.

Space Flight/education↗
NASA NTRS1995

Advanced High-Temperature Engine Materials Technology Progresses

The objective of the Advanced High Temperature Engine Materials Technology Program (HITEMP) is to generate technology for advanced materials and structural analysis that will increase fuel economy, improve reliability, extend life, and reduce operating costs for 21st century civil propulsion systems. The primary focus is on fan and compressor materials (polymer-matrix composites--PMC's), compressor and turbine materials (superalloys, and metal-matrix and intermetallic-matrix composites--MMC's and IMC's) and turbine materials (ceramic-matrix composites--CMC's). These advanced materials are being developed by in-house researchers and on grants and contracts. NASA considers this program to be a focused materials and structures research effort that builds on our base research programs and supports component-development projects. HITEMP is coordinated with the Advanced Subsonic Technology (AST) Program and the Department of Defense/NASA Integrated High-Performance Turbine Engine Technology (IHPTET) Program. Advanced materials and structures technologies from HITEMP may be used in these future applications. Recent technical accomplishments have not only improved the state-of-the-art but have wideranging applications to industry. A high-temperature thin-film strain gage was developed to measure both dynamic and static strain up to 1100 C (2000 F). The gage's unique feature is that it is minimally intrusive. This technology, which received a 1995 R&D 100 Award, has been transferred to AlliedSignal Engines, General Electric Company, and Ford Motor Company. Analytical models developed at the NASA Lewis Research Center were used to study Textron Specialty Materials' manufacturing process for titanium-matrix composite rings. Implementation of our recommendations on tooling and processing conditions resulted in the production of defect free rings. In the Lincoln Composites/AlliedSignal/Lewis cooperative program, a composite compressor case is being manufactured with a Lewis-developed matrix, VCAP. The compressor case, which will reduce weight by 30 percent and costs by 50 percent, is scheduled to be engine tested in the near future.

Source record↗
NASA NTRS1995

Automated Hydrogen Gas Leak Detection System

The Gencorp Aerojet Automated Hydrogen Gas Leak Detection System was developed through the cooperation of industry, academia, and the Government. Although the original purpose of the system was to detect leaks in the main engine of the space shuttle while on the launch pad, it also has significant commercial potential in applications for which there are no existing commercial systems. With high sensitivity, the system can detect hydrogen leaks at low concentrations in inert environments. The sensors are integrated with hardware and software to form a complete system. Several of these systems have already been purchased for use on the Ford Motor Company assembly line for natural gas vehicles. This system to detect trace hydrogen gas leaks from pressurized systems consists of a microprocessor-based control unit that operates a network of sensors. The sensors can be deployed around pipes, connectors, flanges, and tanks of pressurized systems where leaks may occur. The control unit monitors the sensors and provides the operator with a visual representation of the magnitude and locations of the leak as a function of time. The system can be customized to fit the user's needs; for example, it can monitor and display the condition of the flanges and fittings associated with the tank of a natural gas vehicle.

Source record↗
NASA NTRS2004

NASA Computational Mobility

This blue sky study was conducted in order to study the feasibility and scope of the notion of Computational Mobility to potential NASA applications such as control of multiple robotic platforms. The study was started on July lst, 2003 and concluded on September 30th, 2004. During the course of that period, four meetings were held for the participants to meet and discuss the concept, its viability, and potential applications. The study involved, at various stages, the following personnel: James Allen (IHMC), Albert0 Canas (IHMC), Daniel Cooke (Texas Tech), Kenneth Ford (IHMC - PI), Patrick Hayes (IHMC), Butler Hine (NASA), Robert Morris (NASA), Liam Pedersen (NASA), Jerry Pratt (IHMC), Raul Saavedra (IHMC), Niranjan Suri (IHMC), and Milind Tambe (USC). A white paper describing the notion of a Process Integrated Mechanism (PIM) was generated as a result of this study. The white paper is attached to this report. In addition, a number of presentations were generated during the four meetings, which are included in this report. Finally, an execution platform and a simulation environment were developed, which are available upon request from Niranjan Suri (nsuri@,ihmc.us).

Source record↗
NASA NTRS2009

Image-Capture Devices Extend Medicine's Reach

Johnson Space Center, Henry Ford Hospital in Detroit, and Houston-based Wyle Laboratories collaborated on NASA's Advanced Diagnostic Ultrasound in Microgravity (ADUM) experiment, which developed revolutionary medical ultrasound diagnostic techniques for long-distance use. Mediphan, a Canadian company with U.S. operations in Springfield, New Jersey drew on NASA expertise to create frame-grabber and data archiving technology that enables ultrasound users with minimal training to send diagnostic-quality ultrasound images and video to medical professionals via the Internet in near real time allowing patients as varied as professional athletes, Olympians, and mountain climbers to receive medical attention as soon as it is needed.

Source record↗
NASA NTRS2011

Telemedicine in Space Flight - Summary of a NASA Workshop

The Exploration Medical Capability Element of the Human Research Program at NASA Johnson Space Center hosted the Telemedicine Workshop in January 2011 to discuss the medical operational concept for a crewed mission to a near-Earth asteroid (NEA) and to identify areas for future work and collaboration. With the increased likelihood of a medical incident on a long duration exploration mission to a near-Earth asteroid, as well as the fact that there will likely be limited medical capabilities and resources available to diagnose and treat medical conditions, it is anticipated that a more structured use of telemedicine will become highly desirable. The workshop was convened to solicit expert opinion on current telemedicine practices and on medical care in remote environments. Workshop Objectives: The workshop brought together leaders in telemedicine and remote medicine from The University of Texas Medical Branch, Henry Ford Hospital, Ontario Telemedicine Network, U.S. Army Institute of Surgical Research, University of Miami, American Telemedicine Association, Doctors Without Borders, and the Pan American Health Organization. The primary objectives of the workshop were to document the medical operations concept for a crewed mission to a NEA, to determine gaps between current capabilities and the capabilities outlined in the operations concept, to identify research required to close these gaps, and to discuss potential collaborations with external-to-NASA organizations with similar challenges. Summary of Discussions and Conclusions: The discussions held during the workshop and the conclusions reached by the workshop participants were grouped into seven categories: Crew Medical Officers, Patient Area in Spacecraft, Training, Electronic Medical Records, Intelligent Care Systems, Consultation Protocols, Prophylactic Surgical Procedures, and Data Prioritization. The key points discussed under each category will be presented.

Barsten, K. N.↗
NASA NTRSDate not supplied

A High-Performance Computing GNSS-aware Path Planning Algorithm for Safe Urban Flight Operations

The emergence and development of advanced technologies and vehicle types have created a growing demand for new forms of flight operations. These new and increasingly complex operational paradigms, such as Advanced and Urban Air Mobility (AAM/UAM), present regulatory authorities and the aviation community with several design-and-implementation challenges – particularly for highly autonomous vehicles. An overarching and daunting task is to develop protocols that can integrate these operations without compromising safety or disrupting traditional airspace operations. A shift toward a more predictive, autonomous, risk mitigation capability becomes critical to meet this challenge. This paper proposes and evaluates a computationally-efficient path planning approach to perform pre-flight planning and autonomous in-flight re-routing to minimize exposures to selected hazards. In our evaluation, hazards associated with degraded and missing critical GPS navigation data are considered. In this paper, we first present a high-performance computing path planning approach based on an adapted Bellman-Ford algorithm, developed in the CUDA programming language. Using the adapted path planning algorithm, we test this algorithm when encountering issues with GPS quality, and deliver an implementation that can produce flight paths that minimize exposure to risks, while maintaining a low computational burden. In our evaluation, the computation of periodic and aperiodic path updates are evaluated, prioritizing specific events as triggers for updates, based on changes to satellite availability. These critical events can lead to significant exposure to navigational hazards if not dealt with correctly.

GNSS↗
NASA NTRSDate not supplied

A High-Performance Computing GNSS-aware Path Planning Algorithm for Safe Urban Flight Operations

The emergence and development of advanced technologies and vehicle types have created a growing demand for new forms of flight operations. These new and increasingly complex operational paradigms, such as Advanced and Urban Air Mobility (AAM/UAM), present regulatory authorities and the aviation community with several design-and-implementation challenges – particularly for highly autonomous vehicles. An overarching and daunting task is to develop protocols that can integrate these operations without compromising safety or disrupting traditional airspace operations. A shift toward a more predictive, autonomous, risk mitigation capability becomes critical to meet this challenge. This paper proposes and evaluates a computationally-efficient path planning approach to perform pre-flight planning and autonomous in-flight re-routing to minimize exposures to selected hazards. In our evaluation, hazards associated with degraded and missing critical GPS navigation data are considered. In this paper, we first present a high-performance computing path planning approach based on an adapted Bellman-Ford algorithm, developed in the CUDA programming language. Using the adapted path planning algorithm, we test this algorithm when encountering issues with GPS quality, and deliver an implementation that can produce flight paths that minimize exposure to risks, while maintaining a low computational burden. In our evaluation, the computation of periodic and aperiodic path updates are evaluated, prioritizing specific events as triggers for updates, based on changes to satellite availability. These critical events can lead to significant exposure to navigational hazards if not dealt with correctly.

GNSS↗
NASA NTRSDate not supplied

Western Tennessee Water Resources: Leveraging High Resolution Remotely Sensed Data to Assess Water Availability and Vulnerability in the Memphis Aquifer Area in West Tennessee

The West TN portion of the Memphis aquifer, located within the Hatchie-Obion watershed is experiencing increased urban development, especially with the construction of "Blue Oval City", a battery manufacturing site for Ford's new electric trucks. Hayfood and Fayette counties fall within the sensitive recharge zone of the aquifer, and also contain the manufacturing megasite, making this an area of interest to highlight the consequences of increased urbanization to the aquifer. To understand the aquifers health, we averaged aquifer recharge factors seasonally to assess relationships from 2019-2022. Seasonal relationships were considered to highlight the hydrological factors that contribute to recharge, such as water balance, runoff, and evaporative stress that flux season to season (i.e. less precipitation in summer).

Katera Lee↗
NASA NTRS2022

Western Tennessee Water Resources: Leveraging High Resolution Remotely Sensed Data to Assess Water Availability and Vulnerability in the Memphis Aquifer Area in West Tennessee

The Memphis Aquifer (MA) is located in the Mississippi Embayment that extends 250,000 square kilometers across eight states. Fayette and Haywood counties in West Tennessee are situated within the recharge zone of the MA and include the forthcoming Ford “mega campus” named Blue Oval City (BOC), which will consist of a vehicle-production facility and battery assembly division. Increased water demand and land cover change resulting from urban development, such as BOC in the MA’s narrow recharge zone, threaten the aquifer’s groundwater storage and recharge rate. Groundwater recharge factors that influence the narrow recharge zone of the MA include precipitation, evapotranspiration, runoff, and land cover type. In partnership with Protect Our Aquifer (POA) and the Center for Applied Earth Science and Engineering Research (CAESAR) at the University of Memphis, the team used data from the ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS), Integrated Multi-Satellite Retrievals for Global Precipitation Measurement (GPM IMERG), and Landsat 8 Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS). The team also used ancillary data from the National Land Cover Database (NLCD) and the North American Land Data Assimilation System (NLDAS) Noah Land Surface Model. These results identified “thriving” recharge locations, which are areas most conducive to aquifer recharge in Fayette County. The partners may use the results to prioritize specific areas in need of protection before they become susceptible to the effects of urbanization and industrialization.

precipitation↗
NASA NTRS2023

Tracking NO2 Pollution Changes Over Texas: Synthesis of In Situ and Satellite Observations

Nitrogen oxides (NO x ) are major air pollutants that play a crucial role in atmospheric chemistry. We compare Ozone Measuring Instrument's (OMI) NO 2 records with the in situ surface measurements from the Air Quality System of the US Environmental Protection Agency and the Texas Commission on Environmental Quality network in the state of Texas with the goal of understanding the correspondence of satellite and in situ surface observations and identifying the potential synergies between the two observing systems. Our analysis of over 40 in situ daily surface site observations, mostly from urban areas, and OMI daily observed data suggests a correlation ( r ) ranging between 0.2 and 0.8. The correlation improves considerably ( r > 0.5) for monthly average data. Weekly variation of surface NO 2 with a Sunday minimum is well captured by OMI tropospheric NO 2 column observations with similar weekend reductions. NO 2 trend in Texas during 2005–2019 is characterized by significant reductions of 20%–36% in highly populated cities and urban centers. However, a significant (up to 80%) increase was observed in oil and gas producing regions of the Permian and Eagle Ford Basins over the same period. In March–April of 2020, like the other US and global cities, Texas experienced up to 60% reduction in NO 2 levels in major cities due to travel restrictions imposed at local and national levels to contain the spread of COVID-19. Though such reduction is temporary, these reductions were significantly larger than those achieved in the past 16 years of OMI record suggesting that technological advancement can curtail NO x emissions.

Nitrogen dioxide (NO2)↗
NASA NTRS2023

Potentially Underestimated Gas Flaring Activities—A New Approach to Detect Combustion Using Machine Learning and NASA’s Black Marble Product Suite

Monitoring changes in greenhouse gas (GHG) emission is critical for assessing climate mitigation efforts towards the Paris Agreement goal. A crucial aspect of science-based GHG monitoring is to provide objective information for quality assurance and uncertainty assessment of the reported emissions. Emission estimates from combustion events (gas flaring and biomass burning) are often calculated based on activity data (AD) from satellite observations, such as those detected from the visible infrared imaging radiometer suite (VIIRS) onboard the Suomi-NPP and NOAA-20 satellites. These estimates are often incorporated into carbon models for calculating emissions and removals. Consequently, errors and uncertainties associated with AD propagate into these models and impact emission estimates. Deriving uncertainty of AD is therefore crucial for transparency of emission estimates but remains a challenge due to the lack of evaluation data or alternate estimates. This work proposes a new approach using machine learning (ML) for combustion detection from NASA's Black Marble product suite and explores the assessment of potential uncertainties through comparison with existing detections. We jointly characterize combustion using thermal and light emission signals, with the latter improving detection of probable weaker combustion with less distinct thermal signatures. Being methodologically independent, the differences in ML-derived estimates with existing approaches can indicate the potential uncertainties in detection. The approach was applied to detect gas flares over the Eagle Ford Shale, Texas. We analyzed the spatio-temporal variations in detections and found that approximately 79.04% and 72.14% of the light emission-based detections are missed by ML-derived detections from VIIRS thermal bands and existing datasets, respectively. This improvement in combustion detection and scope for uncertainty assessment is essential for comprehensive monitoring of resulting emissions and we discuss the steps for extending this globally.

gas flaring↗
NASA NTRSDate not supplied

Formal Verification, Distributed Computing, and Path Planning Algorithms

The safety- and mission-critical nature of much of the work done at NASA requires algorithms and software to be exceedingly reliable. Formal methods techniques are one way of ensuring this high level of robustness. This talk will discuss the development and formal verification of autonomous aircraft path planning algorithms related to the Bellman-Ford shortest path algorithm, including consideration of distributed computation of the algorithm.

Formal Methods↗