Search NASA⌕ Search

SEARCH · Search NASA

Results for “GAS WELDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Effect of Low-Temperature Sensitization on the Corrosion Behavior of AISI Type 304L SS Weld Metal in Simulated Groundwater

The manuscript presents the investigations carried out on the effect of low-temperature sensitization (LTS) of 304L SS weld metal on its corrosion behavior in simulated groundwater, for its application as a canister material for long-term storage of nuclear vitrified high-level waste in geological repositories. AISI type 304L SS weld pad was fabricated by multipass gas tungsten arc welding process using 308L SS filler wire. The as-welded specimens were subsequently subjected to carbide nucleation and further to LTS at 500 °C for 11 days to simulate a temperature of 300 °C for 100-year life of the canister in geological repositories. Delta ferrite (δ-ferrite) content of the 304L SS weld metal substantially decreased on carbide nucleation treatment and further only a marginal decrease occurred on LTS treatment. The microstructure of the as-welded consisted of δ-ferrite as a minor phase distributed in austenite matrix. The δ-ferrite appeared fragmented in the carbide-nucleated and LTS-treated weld metal. The degree of sensitization measured by double-loop electrochemical potentokinetic reactivation method indicated an increase in carbide nucleation treatment when compared to the as-welded specimens, and further increase occurred on LTS treatment. Potentiodynamic anodic polarization investigations in simulated groundwater indicated a substantial decrease in the localized corrosion resistance of the carbide-nucleated and LTS 304L SS weld metals, when compared to the as-welded specimens. Post-experimental micrographs indicated pitting as the primary mode of attack in the as-welded, while pitting and intergranular corrosion (IGC) occurred in the carbide-nucleated weld metal. LTS-treated weld metal predominantly underwent IGC attack. The decrease in the localized corrosion resistance of the weld metal after LTS treatment was found to have a direct correlation with the degree of sensitization and the weld microstructure. The results are detailed in the manuscript.

36 MATERIALS SCIENCE↗

Investigation of dissimilar metal welds by energy-resolved neutron imaging

A nondestructive study of the internal structure and compositional gradient of dissimilar metal-alloy welds through energy-resolved neutron imaging is described in this paper. The ability of neutrons to penetrate thick metal objects (up to several cm) provides a unique possibility to examine samples which are opaque to other conventional techniques. The presence of Bragg edges in the measured neutron transmission spectra can be used to characterize the internal residual strain within the samples and some microstructural features, e.g. texture within the grains, while neutron resonance absorption provides the possibility to map the degree of uniformity in mixing of the participating alloys and intermetallic formation within the welds. In addition, voids and other defects can be revealed by the variation of neutron attenuation across the samples. This paper demonstrates the potential of neutron energy-resolved imaging to measure all these characteristics simultaneously in a single experiment with sub-mm spatial resolution. Two dissimilar alloy welds are used in this study: Al autogenously laser welded to steel, and Ti gas metal arc welded (GMAW) to stainless steel using Cu as a filler alloy. The cold metal transfer variant of the GMAW process was used in joining the Ti to the stainless steel in order to minimize the heat input. The distributions of the lattice parameter and texture variation in these welds as well as the presence of voids and defects in the melt region are mapped across the welds. The depth of the thermal front in the Al–steel weld is clearly resolved and could be used to optimize the welding process. As a result, a highly textured structure is revealed in the Ti to stainless steel joint where copper was used as a filler wire. The limited diffusion of Ti into the weld region is also verified by the resonance absorption.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Weldability of HAYNES 282 alloy for new fabrications and after service exposure

The effect of alloying elements on the mechanical properties and weldability of wrought gamma prime strengthened nickel based superalloys is well known. An understanding of the basic guidelines concerning alloying additions has led to the invention and development of HAYNES 282 alloy for applications in aircraft and land based gas turbines and other high performance high temperature environments. The alloy combines exceptional high temperature properties with good weldability and fabricability. At high temperatures (?900 >C), the alloy is stronger in creep strength than Waspaloy alloy (UNS N07001) and it approaches the creep strength of R-41 alloy (UNS N07041). Because the alloy has better thermal stability, fabricability and weldability than Waspaloy and R-41 alloys, it is currently being considered as a candidate universal consumable for welding/repair welding of gamma prime strengthened nickel based superalloys and it is also being considered as a suitable replacement for applications where R-41, Waspaloy and C263 (UNS N07263) alloys are currently being used. The alloy was designed to have improved resistance to strain age cracking, a problem common to gamma prime strengthened nickel based superalloys. In this paper, the results from time resolved X-ray diffraction studies during a welding thermal cycle; gas metal arc welding of thick and gas tungsten arc welding of thin section annealed material (for new fabrications) and annealed and aged material (welding under the aged/service exposed condition); and the results from heat affected zone physical simulations of the weldment measured 2 mm from the weld centreline of annealed (for new fabrication) and annealed and aged (service exposed) material will be presented. Creep properties (870 C/159 MPa) of the weldment will be discussed as well as mechanisms leading to failure.

White, H↗

Finite Element Analysis and In-Situ Measurement of Out-of-Plane Distortion in Thin Plate TIG Welding

Transient distortion of thin plate in the welding process usually has a complicated mode and large magnitude. Quantitative measurement and prediction of full-field distortion are challenging and rarely reported up to now. In this study, the out-of-plane distortion of a thin plate during the Tungsten Inert Gas (TIG) welding process was measured using the digital image correlation (DIC) method. A simulation model based on thermal elastic–plastic finite element method (FEM) and DIC measured geometric imperfection were developed for accurate prediction of the transient welding distortion. The numerical results and experimental data agreed very well in both out-of-plane deformation modes and magnitudes of the plate at different stages of welding. The maximum out-of-plane distortion was larger than 4 mm during welding which can cause instability of arc length and heat input. The distance change between welding torch and plate surface was investigated under different initial deflections of the plate before welding. The plate with flat geometry shows the minimum transient and final gap change. In addition, the relationship between heat input and welding distortion was clarified through a series of numerical analyses. As a result, optimization of welding heat input can be performed based on numerical results to avoid excessive welding distortion.

36 MATERIALS SCIENCE↗

Welding shield for coupling heaters

Systems for coupling end portions of two elongated heater portions and methods of using such systems to treat a subsurface formation are described herein. A system may include a holding system configured to hold end portions of the two elongated heater portions so that the end portions are abutted together or located near each other; a shield for enclosing the end portions, and one or more inert gas inlets configured to provide at least one inert gas to flush the system with inert gas during welding of the end portions. The shield may be configured to inhibit oxidation during welding that joins the end portions together. The shield may include a hinged door that, when closed, is configured to at least partially isolate the interior of the shield from the atmosphere. The hinged door, when open, is configured to allow access to the interior of the shield.

Menotti, James Louis↗

A Comparative Study of Fracture Toughness at Cryogenic Temperature of Austenitic Stainless Steel Welds

The ITER magnet system is based on the “cable-in-conduit” conductor (CICC) concept, which consists of stainless steel jackets filled with superconducting strands. The jackets provide high strength, limited fatigue crack growth rate and fracture toughness properties to counteract the high stress imposed by, among others, electromagnetic loads at cryogenic temperature. Austenitic nitrogen-strengthened stainless steels have been chosen as base material for the jackets of the central solenoid and the toroidal field system, for which an extensive set of cryogenic mechanical property data are readily available. However, little is published for their welded joints, and their specific performance when considering different combinations of parent and filler metals. Moreover, the impact of post-weld heat treatments that are required for Nb{sub 3}Sn formation is not extensively treated. Welds are frequently responsible for cracks initiated and propagated by fatigue during service, causing structural failure. It becomes thus essential to select the most suitable combination of parent and filler material and to assess their performance in terms of strength and crack propagation at operation conditions. An extensive test campaign has been conducted at 7 K comparing tungsten inert gas (TIG) welds using two fillers adapted to cryogenic service, EN 1.4453 and JK2LB, applied to two different base metals, AISI 316L and 316LN. A large set of fracture toughness data are presented, and the detrimental effect on fracture toughness of post-weld heat treatments (unavoidable for some of the components) is demonstrated. In this study, austenitic stainless steel TIG welds with various filler metals have undergone a comprehensive fracture mechanics characterization at 7 K. These results are directly exploitable and contribute to the cryogenic fracture mechanics properties database of the ITER magnet system. Additionally, a correlation between the impact in fracture toughness and microstructure resulting from the above treatment is provided.

36 MATERIALS SCIENCE↗

Hydrogen-assisted fracture resistance of pipeline welds in gaseous hydrogen

Fracture resistance of pipeline welds from a range of strength grades and welding techniques was measured in air and 21 MPa hydrogen gas, including electric resistance weld of X52, friction stir weld of X100 and gas metal arc welds (GMAW) of X52, X65 and X100. Welds exhibited a decrease in fracture resistance in hydrogen compared to complementary tests in air. A general trend was observed that fracture resistance in 21 MPa hydrogen gas decreased with increasing yield strength. To accommodate material constraints, two different fracture coupon geometries were used in this study, which were shown to yield similar fracture resistance values in air and 21 MPa hydrogen gas; values using different coupons resulted in less than 15% difference. In addition, fracture coupons were removed from controlled locations in select welds to examine the potential influence of orientation and residual stress. The two orientations examined in the X100 GMAW exhibited negligible differences in fracture resistance in air and, similarly, negligible differences in hydrogen. Residual stress exhibited a modest influence on fracture resistance; however, a consistent trend was not observed between tests in air and hydrogen, suggesting further studies are necessary to better understand the influence of residual stress. A comparison of welds and base metals tested in hydrogen gas showed similar susceptibility to hydrogen-assisted fracture. The overall dominant factor in determining the susceptibility to fracture resistance in hydrogen is the yield strength.

08 HYDROGEN↗

Stress and Diffusion in Stored Pu ZPPR Fuel from Alpha Generation

ZPPR (Zero Power Physics Reactor) is a research reactor that has been used to investigate breeder reactor fuel designs. The reactor has been dismantled but its fuel is still stored there. Of concern are its plutonium containing metal fuel elements which are enclosed in stainless steel cladding with gas space filled with helium–argon gas and welded air tight. The fuel elements which are 5.08 cm by 0.508 cm up to 20.32 cm long (2 in × 0.2 in × 8 in) were manufactured in 1968. A few of these fuel elements have failed releasing contamination raising concern about the general state of the large number of other fuel elements. Inspection of the large number of fuel elements could lead to contamination release so analytical studies have been conducted to estimate the probability of failed fuel elements. This paper investigates the possible fuel failures due to generation of helium in the metal fuel from the decay of Pu and its possible damage to the fuel cladding from metal fuel expansion or from diffusion of helium into the fuel gas space. This paper (1) calculates the initial gas loading in a fuel element and its internal free volume after it has been brought into the atmosphere at ZPPR, (2) shows that the amount of helium generated by decay of Pu over 46 years since manufacture is significantly greater than this initial loading, (3) determines the amount of fuel swelling if the helium stays fixed in the fuel plate and estimates the amount of helium which diffuses out of the fuel plate into the fuel plenum assuming the helium does not remain fixed in the fuel plate but can diffuse to the plenum and possibly through the cladding. Since the literature is not clear as to which possibility occurs, as with Schroedinger’s cat, both possibilities are analyzed. The paper concludes that (1) if the gas generated is fixed in the fuel, then the fuel swelling it can cause would not cause any fuel failure and (2) if the helium does diffuse out of the fuel (in accordance diffusivities estimated from the literature), then it is unlikely that fuel element bulging will occur.

99 GENERAL AND MISCELLANEOUS↗

Effect of tritium and decay helium on the fracture toughness properties of stainless steel weldments

J-Integral fracture toughness tests were conducted on tritium-exposed-and- aged Types 304L and 21-6-9 stainless steel weldments in order to measure the combined effects of tritium and its decay product, helium-3 on the fracture toughness properties. Initially, weldments have fracture toughness values about three times higher than base-metal values. Delta-ferrite phase in the weld microstructure improved toughness provided no tritium was present in the microstructure. After a tritium-exposure-and-aging treatment that resulted in {approx}1400 atomic parts per million (appm) dissolved tritium, both weldments and base metals had their fracture toughness values reduced to about the same level. The tritium effect was greater in weldments (67 % reduction vs. 37% reduction) largely because the ductile discontinuous delta-ferrite phase was embrittled by tritium and decay helium. For both base metals and weldments, fracture toughness values decreased with increasing decay helium content in the range tested (50-800 appm). (authors)

36 MATERIALS SCIENCE↗

A Technique for the Quantitative Characterization of Weld Microstructure and Application to Mo Welds

The choice of weld parameters determines the size, shape, and curvature of grains in the fusion zone (FZ) and heat-affected zone (HAZ) of welds while the mechanical properties of the welds are correlated to this microstructure. Here, a new technique to quantitatively evaluate these microstructural characteristics in both zones of welds has been applied to molybdenum gas tungsten arc welds fabricated using different weld parameters. Trends in microstructural characteristics in the FZ and HAZ were evaluated and correlated with changes to heat input, weld speed, and weld technique. The use of this approach showed that a 20 pct decrease in heat input caused a 20 pct decrease in the number of FZ grains with aspect ratios ≥ 4. The orientations of the FZ grain segments as a function of distance from the FZ centerline were significantly affected by the weld speed and its effect on weld pool shape. A 50 pct increase in weld speed caused a 20 pct decrease in grain segments orientated 60 to 90 deg from the normal to the direction of welding. This technique also captured differences in grain sizes and grain size anisotropy in the FZ between welds made with a constant current, pulsed current, and use of a 4-pole-magnetic oscillator.

36 MATERIALS SCIENCE↗

Characterization of different forms of Zr-2.5Nb samples before and after neutron irradiation

Deleterious effects of hydride precipitation on the mechanical properties of Zr-based alloy systems have been studied for many years. Most of these studies have been conducted at high-temperature irradiation conditions that are compatible with those in commercial reactor systems, such as light water and pressurized water reactors. Evaluations of hydride effects on the mechanical properties of welded Zr-2.5Nb are sparse among these reported studies. Research on the mechanical properties of Zr-based alloys neutron irradiated at low temperatures (<100 °C) is also very rare in the literature. Since some companies are interested in using Zr-based alloys as structural materials and in other parts such as pressure tubes in small reactor systems, low-temperature irradiation studies of these materials are important. The current work presents an evaluation of the tensile properties of Zr-2.5Nb welded using tungsten inert gas and electron beam welding as a function of hydrogen charging and neutron irradiation at low temperatures (60–100 °C).

36 MATERIALS SCIENCE↗

3D numerical investigation of a free-burning argon arc with metal electrodes using a novel sheath coupling procedure

In this study, a novel coupling procedure describing the complicated plasma-electrode interaction process has been developed and applied into the 3D finite volume simulation of a direct current tungsten inert gas (TIG) welding system. This is achieved by making the space charge layer (sheath) incorporated into the computation domain and interact with both bulk plasma and cathode through the effective electrical conductivity. Both chemical and thermal nonequilibrium phenomena as well as the self-induced magnetic fields have been taken into consideration by the model to ensure a realistic numerical description of a non-thermal arc. The applicability of this coupling procedure is further improved by calculating the real electric potential, which is capable of accounting for the effects of the complicated drift and diffusion processes. Numerical results of both 100 and 200A discharge currents are presented, field reversal is obtained at near-anode regions in both cases, which is followed by the negative anode sheath potential drop. The region of the strongest electron overpopulation appears at the intersection of plasma fringes and electrode surface. Finally, numerical results of plasma temperature and voltage show good agreement with experimental measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of radiogenic helium on stainless steel 12Cr18Ni10Ti structural changes and hydrogen sorption

The tritium trick technique was used to build-up radiogenic helium inside stainless steel 12Cr18Ni10Ti (SS). A great quantity of defects with a mean diameter of 20 nm, most probably platelet-like bubbles with {sup 3}He atoms, was observed in {sup 3}He-containing samples. The mean density of these bubbles in SS samples containing {approx}75 appm of {sup 3}He is estimated to be 6x10{sup 20} m{sup -3}. Much larger helium bubbles were observed in SS after annealing the samples at T {>=}1170 K. Thermal release of radiogenic helium occurs at T and >1500 K The presence of {sup 3}He in structural materials causes the formation of an additional state for hydrogen sorption. (authors)

36 MATERIALS SCIENCE↗

Transport of tritium in SS316 at moderate temperatures

From tritium release experiments with stainless steel 316 carried out at several temperatures and tritium depth profiles of tritium-depleted specimen information on the transport of tritium by two diverse techniques was obtained. The results could be interpreted by a one dimensional diffusion model. The activation energy for the diffusion of tritium through stainless steel was found to be 61.3 kJ/mol. (authors)

36 MATERIALS SCIENCE↗

Challenges in Making Metal Large-scale Complex Parts for Additive Manufacturing: A Case Study Based on the Additive Manufacturing Excavator (AME)

The Additive Manufacturing Excavator (AME) contained several key components that were 3D printed at The Manufacturing Demonstration Facility (MDF) of Oak Ridge National Laboratory (ORNL); it was presented at and performed a live demonstration for the CONEXPO 2017 exhibition in Las Vegas, Nevada in March of 2017. This paper presents challenges in building functional, large-scale metal parts based on a case study of the excavator. The excavator’s metal arm was 3D printed using a modified Wolf Robotics automated metal inert gas (MIG) welding cell. Tasks included designing a new type of slicer for the metal additive manufacturing (AM) process, integrating the slicing software with the Wolf Robotics system, developing the deposition process, characterizing geometric features and material properties, managing heat, designing mechanical components for metal AM, and developing a machining approach to achieve the final part. Two fully functional excavator arms were printed and machined. Integrated hydraulics passageways that also served as structural stiffeners were included in the build for demonstration purposes. As a direct result of this project, Wolf Robotics is now working towards a commercially available large-scale metal AM system.

Nycz, Andrzej↗

Feasibility Analysis of Utilizing Maraging Steel in a Wire Arc Additive Process for High-Strength Tooling Applications

Traditional tool and die development require skilled labor, long lead time, and is highly expensive to produce. Metal Big Area Additive Manufacturing (mBAAM) is a wire-arc additive process that utilizes a metal inert gas (MIG) welding robot to print large-scale parts layer-by-layer. By using mBAAM, tooling can be manufactured rapidly with low costs. For cold work tooling applications, a high hardness level is desired to increase the life-time of the tool. A promising material that can achieve this is maraging steel. Maraging steel is known to have good weldability; however, further testing must be conducted to ensure it is feasible for printing using mBAAM. In this paper, initial process parameters were obtained by printing single bead welds. Multi-bead walls were then printed with some refinement of process parameters to construct homogenous outer features of the walls. Lastly, the walls were heat-treated, and hardness data was gathered through Rockwell Hardness tests.

Masuo, Chris↗

The Effect of Reduced Pressure on Laser Keyhole Weld Porosity and Weld Geometry in Commercially Pure Titanium and Nickel

Here, the beneficial effect of reduced pressure laser welding in vacuum at 10 -1 mBar was investigated in commercially pure titanium and nickel and compared to atmospheric pressure welding in Ar shielding gas. Partial penetration keyhole welds were made in these materials using a continuous wave disk laser operating at 2-4 kW and travel speeds of 12 and 17 mm/s, where moderate to severe porosity is observed under normal atmospheric pressure welding conditions. Additional welds were made in nickel using an electron beam welding process and the same parameters for comparison. Optical metallography, x-ray radiography, and computed x-ray tomography (CT) were used to characterize the porosity levels in the welds. Quantitative CT results show a monotonically decreasing pore size distribution for all of the welds, and the distributions can be fit with a 2-parameter Wiebull relationship with a beta shape factor that varied between 0.37 and 0.61 depending on the welding conditions. Other results show that laser vacuum essentially eliminates porosity in titanium, and significantly reduces porosity in nickel, but does not completely eliminate porosity in nickel. Laser vacuum welds have increased keyhole penetration and reduced weld widths compared to their atmospheric pressure counterparts, with similar beneficial geometric weld shapes as electron beam welds that are also made in vacuum. Finally, laser vacuum welds showed approximately one-half the volumetric porosity in nickel than electron beam welds, with less porosity at the weld root.

36 MATERIALS SCIENCE↗