Search NASA⌕ Search

SEARCH · Search NASA

Results for “Generalization error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Formulaton of a general technique for predicting pneumatic attenuation errors in airborne pressure sensing devices

Presented is a mathematical model, derived from the Navier-Stokes equations of momentum and continuity, which may be accurately used to predict the behavior of conventionally mounted pneumatic sensing systems subject to arbitrary pressure inputs. Numerical techniques for solving the general model are developed. Both step and frequency response lab tests were performed. These data are compared against solutions of the mathematical model. The comparisons show excellent agreement. The procedures used to obtain the lab data are described. In-flight step and frequency response data were obtained. Comparisons with numerical solutions of the mathematical model show good agreement. Procedures used to obtain the flight data are described. Difficulties encountered with obtaining the flight data are discussed.

Whitmore, Stephen A.↗
NASA NTRS1987

Analysis of the vibratory excitation arising from spiral bevel gears

Tools required to understand and predict in terms of its underlying causes the vibratory excitation arising from meshing spiral bevel gears are developed. A generalized three component transmission error of meshing spiral bevel gears is defined. Equations are derived that yield the three components of the generalized transmission error in terms of deviations of tooth running surfaces from equispaced perfect spherical involute surfaces and tooth/gearbody elastic deformations arising from the three components of the generalized force transmitted by the meshing gears. A method for incorporating these equations into the equations of motion of a gear system is described. Equations are derived for the three components of the generalized force transmitted by the gears which are valid whenever inertial effects of the meshing gears and their supports are negligible. Bearing offsets from the positions occupied by the shaft centerlines of perfect spherical involute bevel gears and bearing/bearing support flexibilities enter into the computation of these forces.

Mark, William D.↗
NASA NTRS1984

Error analysis and correction of discrete solutions from finite element codes

Many structures are an assembly of individual shell components. Therefore, results for stresses and deflections from finite element solutions for each shell component should agree with the equations of shell theory. This paper examines the problem of applying shell theory to the error analysis and the correction of finite element results. The general approach to error analysis and correction is discussed first. Relaxation methods are suggested as one approach to correcting finite element results for all or parts of shell structures. Next, the problem of error analysis of plate structures is examined in more detail. The method of successive approximations is adapted to take discrete finite element solutions and to generate continuous approximate solutions for postbuckled plates. Preliminary numerical results are included.

Thurston, G. A.↗
NASA NTRS1990

Sloppy-slotted ALOHA

Random access signaling, which allows slotted packets to spill over into adjacent slots, is investigated. It is shown that sloppy-slotted ALOHA can always provide higher throughput than conventional slotted ALOHA. The degree of improvement depends on the timing error distribution. Throughput performance is presented for Gaussian timing error distributions, modified to include timing error corrections. A general channel capacity lower bound, independent of the specific timing error distribution, is also presented.

Crozier, Stewart N.↗
NASA NTRS1961

Performance Charts for Multistage Rocket Boosters

Charts relating the stage propellant fractions are given for two-and three-stage rockets launching payloads into nominal low-altitude circular orbits about the earth. A simple method is described for extending these data to higher orbit or escape missions. Various combinations of stages using RP - liquid-oxygen and hydrogen - liquid-oxygen propellants are considered. However, the results can be generalized with little error to any other propellant combination.Charts relating the stage propellant fractions are given for two-and three-stage rockets launching payloads into nominal low-altitude circular orbits about the earth. A simple method is described for extending these data to higher orbit or escape missions. Various combinations of stages using RP - liquid-oxygen and hydrogen - liquid-oxygen propellants are considered. However, the results can be generalized with little error to any other propellant combination.

MacKay, John S.↗
NASA NTRS1974

Uncertainties in predicting solar panel power output

The problem of calculating solar panel power output at launch and during a space mission is considered. The major sources of uncertainty and error in predicting the post launch electrical performance of the panel are considered. A general discussion of error analysis is given. Examples of uncertainty calculations are included. A general method of calculating the effect on the panel of various degrading environments is presented, with references supplied for specific methods. A technique for sizing a solar panel for a required mission power profile is developed.

Anspaugh, B.↗
NASA NTRS1986

Reliability issues in active control of large flexible space structures

Efforts in this reporting period were centered on four research tasks: design of failure detection filters for robust performance in the presence of modeling errors, design of generalized parity relations for robust performance in the presence of modeling errors, design of failure sensitive observers using the geometric system theory of Wonham, and computational techniques for evaluation of the performance of control systems with fault tolerance and redundancy management

Vandervelde, W. E.↗
NASA NTRS1986

A search for high proper motion objects in two gamma-ray burst error regions

Deep optical images of small gamma-ray burst error regions have generally resulted in the detection of several faint sources in each error region. It may be possible to identify the neutron star source of a GRB on the basis of a high transverse peculiar velocity if the source is at moderate distance. The results of searches for high proper motion objects in the error regions of GBS1412+78 and GBS2251-02 are reported.

Ricker, George R.↗
NASA NTRS1987

Input error versus output error model reference adaptive control

Algorithms for model reference adaptive control were developed in recent years, and their stability and convergence properties have been investigated. Typical algorithms in continuous time involve strictly positive real conditions on the reference model, while similar discrete time algorithms do not require such conditions. It is shown how algorithms differ by the use of an input error versus an output error, and present a continuous time input error adaptive control algorithm which does not involve SPR conditions. The connections with other schemes are discussed. The input error scheme has general stability and ocnvergence properties that are similar to the output error scheme. However, analysis using averaging methods reveals some preferable convergence properties of the input error scheme. Several other advantages are also discussed.

Bodson, Marc↗
NASA NTRS1971

Extensions of the space trajectories error analysis programs

A generalized covariance analysis technique which permits the study of the sensitivity of linear estimation algorithms to errors in a priori statistics has been developed and programed. Several sample cases are presented to illustrate the use of this technique. Modifications to the Simulated Trajectories Error Analysis Program (STEAP) to enable targeting a multiprobe mission of the Planetary Explorer type are discussed. The logic for the mini-probe targeting is presented. Finally, the initial phases of the conversion of the Viking mission Lander Trajectory Reconstruction (LTR) program for use on Venus missions is discussed. An integrator instability problem is discussed and a solution proposed.

Adams, G. L.↗
NASA NTRS2011

Investigating Material Approximations in Spacecraft Radiation Analysis

During the design process, the configuration of space vehicles and habitats changes frequently and the merits of design changes must be evaluated. Methods for rapidly assessing astronaut exposure are therefore required. Typically, approximations are made to simplify the geometry and speed up the evaluation of each design. In this work, the error associated with two common approximations used to simplify space radiation vehicle analyses, scaling into equivalent materials and material reordering, are investigated. Over thirty materials commonly found in spacesuits, vehicles, and human bodies are considered. Each material is placed in a material group (aluminum, polyethylene, or tissue), and the error associated with scaling and reordering was quantified for each material. Of the scaling methods investigated, range scaling is shown to be the superior method, especially for shields less than 30 g/cm2 exposed to a solar particle event. More complicated, realistic slabs are examined to quantify the separate and combined effects of using equivalent materials and reordering. The error associated with material reordering is shown to be at least comparable to, if not greater than, the error associated with range scaling. In general, scaling and reordering errors were found to grow with the difference between the average nuclear charge of the actual material and average nuclear charge of the equivalent material. Based on this result, a different set of equivalent materials (titanium, aluminum, and tissue) are substituted for the commonly used aluminum, polyethylene, and tissue. The realistic cases are scaled and reordered using the new equivalent materials, and the reduced error is shown.

Walker, Steven A.↗
NASA NTRS2001

Estimating Bias Error Distributions

This paper formulates the general methodology for estimating the bias error distribution of a device in a measuring domain from less accurate measurements when a minimal number of standard values (typically two values) are available. A new perspective is that the bias error distribution can be found as a solution of an intrinsic functional equation in a domain. Based on this theory, the scaling- and translation-based methods for determining the bias error distribution arc developed. These methods are virtually applicable to any device as long as the bias error distribution of the device can be sufficiently described by a power series (a polynomial) or a Fourier series in a domain. These methods have been validated through computational simulations and laboratory calibration experiments for a number of different devices.

Liu, Tian-Shu↗
NASA NTRS1992

Dominant modes via model error

Obtaining a reduced model of a stable mechanical system with proportional damping is considered. Such systems can be conveniently represented in modal coordinates. Two popular schemes, the modal cost analysis and the balancing method, offer simple means of identifying dominant modes for retention in the reduced model. The dominance is measured via the modal costs in the case of modal cost analysis and via the singular values of the Gramian-product in the case of balancing. Though these measures do not exactly reflect the more appropriate model error, which is the H2 norm of the output-error between the full and the reduced models, they do lead to simple computations. Normally, the model error is computed after the reduced model is obtained, since it is believed that, in general, the model error cannot be easily computed a priori. The authors point out that the model error can also be calculated a priori, just as easily as the above measures. Hence, the model error itself can be used to determine the dominant modes. Moreover, the simplicity of the computations does not presume any special properties of the system, such as small damping, orthogonal symmetry, etc.

Yousuff, A.↗
NASA NTRS1994

Comparison of Transmission Error Predictions with Noise Measurements for Several Spur and Helical Gears

Measured sound power data from eight different spur, single and double helical gear designs are compared with predictions of transmission error by the Load Distribution Program. The sound power data was taken from the recent Army-funded Advanced Rotorcraft Transmission project. Tests were conducted in the NASA gear noise rig. Results of both test data and transmission error predictions are made for each harmonic of mesh frequency at several operating conditions. In general, the transmission error predictions compare favorably with the measured noise levels.

Houser, Donald R.↗
NASA NTRS1998

An emerging network storage management standard: Media error monitoring and reporting information (MEMRI) - to determine optical tape data integrity

Sophisticated network storage management applications are rapidly evolving to satisfy a market demand for highly reliable data storage systems with large data storage capacities and performance requirements. To preserve a high degree of data integrity, these applications must rely on intelligent data storage devices that can provide reliable indicators of data degradation. Error correction activity generally occurs within storage devices without notification to the host. Early indicators of degradation and media error monitoring 333 and reporting (MEMR) techniques implemented in data storage devices allow network storage management applications to notify system administrators of these events and to take appropriate corrective actions before catastrophic errors occur. Although MEMR techniques have been implemented in data storage devices for many years, until 1996 no MEMR standards existed. In 1996 the American National Standards Institute (ANSI) approved the only known (world-wide) industry standard specifying MEMR techniques to verify stored data on optical disks. This industry standard was developed under the auspices of the Association for Information and Image Management (AIIM). A recently formed AIIM Optical Tape Subcommittee initiated the development of another data integrity standard specifying a set of media error monitoring tools and media error monitoring information (MEMRI) to verify stored data on optical tape media. This paper discusses the need for intelligent storage devices that can provide data integrity metadata, the content of the existing data integrity standard for optical disks, and the content of the MEMRI standard being developed by the AIIM Optical Tape Subcommittee.

Podio, Fernando↗
NASA NTRS2000

Tidal Energy Dissipation from Topex/Poseidon

In a recent paper ({\it Nature, 405,} 775, 2000) we concluded that 25 to 30\% of the ocean's tidal energy dissipation, or about 1 terawatt, occurs in the deep ocean, with the remaining 2.6 TW in shallow seas. The physical mechanism for deep-ocean dissipation is apparently scattering of the surface tide into internal modes; Munk and Wunsch have suggested that this mechanism may provide half the power needed for mixing the deep-ocean. This paper builds further evidence for $1\pm 0.2$ TW of deep-ocean dissipation. The evidence is extracted from tidal elevations deduced from seven years of Topex/Poseidon satellite altimeter data. The dissipation rate Is formed as a balance between the rate of working by tidal forces and the energy flux divergence. While dynamical assumptions are required to compute fluxes, area integrals of the energy balance are, owing to the tight satellite constraints, remarkably insensitive to these assumptions. A large suite of tidal solutions based on a wide range of dynamical assumptions, on perturbations to bathymetric models, and on simulated elevation data are used to assess this sensitivity. These and Monte Carlo error fields from a generalized inverse model are used to establish error uncertainties.

Ray, Richard D.↗
NASA NTRS2001

Estimates of M2 Tidal Energy Dissipation from TOPEX/Poseidon Altimeter Data

Most of the tidal energy dissipation in the ocean occurs in shallow seas, as has long been recognized. However, recent work has suggested that a significant fraction of the dissipation, perhaps 1 TW or more, occurs in the deep ocean. This paper builds further evidence for that conclusion. More than 6 years of data from the TOPEX/Poseidon satellite altimeter are used to map the tidal dissipation rate throughout the world ocean. The dissipation rate is estimated as a balance between the rate of working by tidal forces and the energy flux divergence, computed using currents derived by least squares fitting of the altimeter data and the shallow water equations. Such calculations require dynamical assumptions, in particular about the nature of dissipation. To assess sensitivity of dissipation estimates to input assumptions, a large suite of tidal inversions based on a wide range of drag parameterizations and employing both real and synthetic altimeter data are compared. These experiments and Monte Carlo error fields from a generalized inverse model are used to establish error uncertainties for the dissipation estimates. Owing to the tight constraints on tidal elevation fields provided by the altimeter, area integrals of the energy balance are remarkably insensitive to required dynamical assumptions. Tidal energy dissipation is estimated for all major shallow seas (excluding individual polar seas) and compared with previous model and data-based estimates. Dissipation in the open ocean is significantly tnhanced around major bathymetric features, in a manner consistent with simple theories the generation of baroclinic tides.

Egbert, Gary D.↗