Search NASA⌕ Search

SEARCH · Search NASA

Results for “Geologic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Lunar resource evaluation and mine site selection

Two scenarios in this evaluation of lunar mineral resources and the selection of possible mining and processing sites are considered. The first scenario assumes that no new surface or near-surface data will be available before site selection (presumably one of the Apollo sites). The second scenario assumes that additional surface geology data will have been obtained by a lunar orbiter mission, an unmanned sample return mission (or missions), and followup manned missions. Regardless of the scenario, once a potentially favorable mine site has been identified, a minimum amount of fundamental data is needed to assess the resources at that site and to evaluate its suitability for mining and downstream processing. Since much of the required data depends on the target mineral(s), information on the resource, its beneficiation, and the refining, smelting, and fabricating processes must be factored into the evaluation. The annual capacity and producing lifetime of the mine and its associated processing plant must be estimated before the resource reserves can be assessed. The available market for the product largely determines the capacity and lifetime of the mine. The Apollo 17 site is described as a possible mining site. The use of new sites is briefly addressed.

Bence, A. Edward↗
NASA NTRS1986

A geologic atlas of TIMS data

In the three years since the first data were taken, it was well demonstrated that the Thermal Infrared Multispectral Scanner (TIMS), properly used, can be a most valuable tool for the geologist. Compilation of the TIMS data into a geological atlas was felt to be useful. Several data sets were extensively studied to establish TIMS as a geologic tool and to explore the optimum enhancement techniques. It was found that a decorrelation stretch of bands 1, 3, and 5 enhance the data to a form that is very useful and this enhancement will be used in the geologic atlas along with an accompanying geologic map and description. Many data sets are well published and familiar to TIMS users, but there are some sets that, for lack of time and funds, were not thoroughly studied or published. A short description of these least studied sets of data is presented. The images presented along with the many previously studied and published TIMS images constitute an enormously useful set of information for the geologist in the 8 to 10 micron range.

Abbott, Elsa↗
NASA NTRS2003

An Automated Approach for Acquiring Onboard Rover Science

Rover traverse distances are increasing at a faster rate than downlink capacity is increasing. As this trend continues, the quantity of data that can be returned to Earth per meter traversed is reduced. The capacity of the rover to collect data, however, remains high. This circumstance leads to an opportunity to increase mission science return by carefully selecting the data with the highest science interest for downlink. We have developed an onboard science analysis technology for increasing science return from missions. Our technology evaluates the geologic data gathered by the rover. This analysis is used to prioritize the data for transmission, so that the data with the highest science value is transmitted to Earth. In addition, the onboard analysis results are used to identify additional science gathering opportunities. A planning and scheduling component of the system enables the rover to take advantage of the identified science opportunity.

Anderson, R. C.↗
NASA NTRS1980

Formation of complex impact craters - Evidence from Mars and other planets

An analysis of the depth vs diameter data of Arthur (1980), is given along with geomorphic data for 73 Martian craters. The implications for the formation of complex impact craters on solid planets is discussed. The analysis integrates detailed morphological observations on planetary craters with geologic data from terrestrial meteorite and explosion craters. The simple to complex transition for impact craters on Mars appears at diameters in the range of 3 to 8 km. Five features appear sequentially with increasing crater size, flat floors, central peaks and shallower depths, scalloped rims, and terraced walls. This order suggests that a shallow depth of excavation and a rebound mechanism have produced the central peaks, not centripetal collapse and deep sliding. Simple craters are relatively uniform in shape from planet to planet, but complex craters vary considerably. Both the average onset diameter for complex impact craters on Mars and the average depth of complex craters vary inversely with gravitational acceleration on four planets.

Pike, R. J.↗
NASA NTRS1988

New data on the formation conditions and age of the Kamensk and Gusev astroblemes

Discussed is new information recently published on the higher contents of siderophilic in the block breccia, fragments of coesite rocks in the Glubokinskiy series within the Kamenskiy astrobleme. New geological data which have refined the concept regarding the structure and age of the Kamenskiy astrobleme are presented.

Movshovich, Ye. V.↗
NASA NTRS1973

Structural lineaments of Gaspe from ERTS imagery

A test study was conducted to assess the value of ERTS images for mapping geologic features of the Gaspe Peninsula, Quebec. The specific objectives of the study were: 1) to ascertain the best procedure to follow in order to obtain valuable geologic data as a result of interpretation; and 2) to indicate in which way these data could relate to mineral exploration. Of the four spectral bands of the Multispectral scanner, the band from 700 to 800 nanometers, which seems to possess the best informational content for geologic study, was selected for analysis. The original ERTS image at a scale of 1:3,700,000 was enlarged about 15 times and reproduced on film. Geologically meaningful lines, called structural lineaments, were outlined and classified according to five categories: morpho-lithologic boundaries, morpho-lithologic lineaments, fault traces, fracture zones and undefined lineaments. Comparison with the geologic map of Gaspe shows that morpho-lithologic boundaries correspond to contacts between regional stratigraphic units. Morpholithologic lineaments follow bedding trends, whereas fracture traces appear as sets of parallel lineaments, intersecting at high angles the previous category of lineaments. Fault traces mark more precisely the location of faults already mapped and spot the presence of presumable faults, not indicated on the geologic map.

Steffensen, R.↗
NASA NTRS1995

Geochemical characteristics of organic compounds in a permafrost sediment core sample from northeast Siberia, Russia

We studied total organic carbon (TOC), hydrocarbons and fatty acids in a permafrost sediment core sample (well 6-90, length 32.0 m, 1.5-2.5 Ma BP) from northeast Siberia (approximately 70 degrees N, 158 degrees E), Russia, to elucidate their geochemical features in relation to source organisms and paleoenvironmental conditions. Long-chain n-alkanes and n-alkanoic acids (>C19) were most predominant hydrocarbons and fatty acids, respectively, so organic matter in the sediment core was derived mainly from vascular plants and, to a much smaller extent, from bacteria. Low concentrations of unsaturated fatty acids revealed that organic matter in the sediment core was considerably degraded during and/or after sedimentation. The predominance of vascular plant components, the major ionic components of nonmarine sources, and geological data strongly implied that the sediment layers were formed in shallow lacustrine environments, such as swamp with large influences of tundra or forest-tundra vegetation. Also, no drastic changes in paleoenvironmental conditions for biological activity or geological events, such as sea transgressions or ice-sheet influences, occurred at the sampling site approximately 100 km from the coast of the East Siberian Sea during the late Pliocene an early Pleistocene periods.

NASA Discipline Exobiology↗
NASA NTRS1980

Middle infrared multispectral aircraft scanner data - Analysis for geological applications

Multispectral middle IR (8-13 microns) data were acquired with an aircraft scanner over Utah. Because these digital image data were dominated by temperature, all six channels were highly correlated. Extensive processing was required to allow geologic photointerpretation based on subtle variations in spectral emittance between rock types. After preliminary processing, ratio images were produced and color ratio composites created from these. Sensor calibration and an atmospheric model allowed determination of surface brightness, temperature, emittance, and color composite emittance images. The best separation of major rock types was achieved with a principal component transformation, followed by a Gaussian stretch, followed by an inverse transformation to the original axes.

Kahle, A. B.↗
NASA NTRS1982

Analysis of geologic terrain models for determination of optimum SAR sensor configuration and optimum information extraction for exploration of global non-renewable resources. Pilot study: Arkansas Remote Sensing Laboratory, part 1, part 2, and part 3

Computer-generated radar simulations and mathematical geologic terrain models were used to establish the optimum radar sensor operating parameters for geologic research. An initial set of mathematical geologic terrain models was created for three basic landforms and families of simulated radar images were prepared from these models for numerous interacting sensor, platform, and terrain variables. The tradeoffs between the various sensor parameters and the quantity and quality of the extractable geologic data were investigated as well as the development of automated techniques of digital SAR image analysis. Initial work on a texture analysis of SEASAT SAR imagery is reported. Computer-generated radar simulations are shown for combinations of two geologic models and three SAR angles of incidence.

Kaupp, V. H.↗
NASA NTRS1988

Comparison of GPS surveys with historical triangulation surveys in the southern California borderland

Global plate models predict about 56 mm/yr of motion between the North American and Pacific plates along the plate boundary in southern California, while geodetic and Holocene geological data suggest only 34 mm/yr on the San Andreas fault. Deformation in the Great Basin does not explain this discrepancy, and it has been suggested that faulting in the offshore of southern California could account for some of the discrepancy. Evidence of deformation in the offshore region of southern California is most abundant in the Santa Barbara Channel. Geological investigations of folding and faulting in this region, as well as earthquake investigations, indicate north-south shortening across the channel on the order of 10 to 20 mm/yr. The most rapid rates occur to the east of the channel in the Ventura Basin. South of the Santa Barbara Channel, though, evidence for deformation is limited to seismicity studies which are sparse. Seismic events are abundant in this area, but their implication for the amount of deformation in the offshore is unclear. GPS measurements made between June 1986 and May 1988 have been used to obtain vector positions for several stations at which historical first order triangulation observations were performed between the late 1800's and the mid 1900's between the coast of southern California and the nearby offshore islands. By comparing the spheroidal angles obtained from the GPS positions with the the previously observed triangulation data, shear strain rates can be calculated for the region using Frank's method. These results seem to suggest that shear strain deformation occurs in the offshore of southern California as a result of north to north-west shortening. That deformation is most active in the Santa Barbara Channel region and least active between Catalina and San Nicholas islands. Just how much of the missing plate motion can be accounted for by this deformation is not known at this time and will have to await further analysis.

Webb, Frank H.↗
NASA NTRS1976

The use of ERTS/LANDSAT imagery in relation to airborne remote sensing for terrain analysis in Western Queensland, Australia

The author has identified the following significant results. LANDSAT 1 and 2 imagery contrast the geology of the Cloncurry-Dobbyn and the Gregory River-Mt. Isa areas very clearly. Known major structural features and lithological units are clearly displayed while, hitherto unknown lineaments were revealed. Throughout this area, similar rock types produce similar spectral signatures, e.g. quartzites produce light signatures, iron rich rocks produce dark signatures. More geological data are discernible at the 1:50,000 scale than on the 1:250,000 scale. Ore horizons may be identified at the 1:50,000 scale, particularly where they are associated with iron rich rocks. On the level plains north of Cloncurry, distinctive spectral signatures produced by the combined reflectances of plant cover, soils, and geology, distinguish different types of superficial deposits. Existing and former channels of the Cloncurry and Williams Rivers are distinguished at the 1:50,000 scale on both the LANDSAT 1 and 2 imagery. On the Cloncurry Plains, fence lines are discernible on the 1:50,000 LANDSAT 2 imagery.

Cole, M. M.↗
NASA NTRS1984

Application of MAGSAT to Lithospheric Modeling in South America. Part 2: Synthesis of Geologic and Seismic Data for Development of Integrated Crustal Models

Research activities performed on MAGSAT scalar data over South America, Central America, and the adjacent marine areas are summarized. The geologic utility of magnetic anomalies detected by satellite is demonstrated by focusing on the spherical-Earth interpretation of scalar MAGSAT data in combination with ancillary geological and geophysical data to obtain lithospheric models for these regions related to their contemporary crustal dynamics processes, geologic history, current volcanism seismicity and natural resources.

Keller, G. R.↗
NASA NTRSDate not supplied

Ruggedizing a Commercial Depth Camera for Novel Lunar Exploration.

The novel contribution of this instrument is to take the first depth images on the moon. A commercial Kinect camera from Microsoft has been ruggedized for a CLPS mission to the Lunar South Pole. The 12-megapixel color camera is combined with a 1-megapixel color time-of-flight (ToF) depth sensor. The solid-state depth sensor/LIDAR provides greater resolution, a wider field of view, pixel binning, and reduced power consumption. The high-resolution data collected from the mission can be used to construct a near-field virtual environment of the lunar surface for scientific applications. The depth camera can provide a 360-degree view of the target area by combining ToF data with RGB imagery and rover turning. The unit was evaluated for space flight compliant materials and parts at NASA Ames. The microphone array, RF shield, front face, and outer body parts were removed to reduce mass. Plastic parts were replaced with vacuum-compatible materials; manufactured cables were added to properly interface with the host rover, built by Lunar Outpost. The environmental testing was performed on the Kinect with Random Vibration/Sine Testing (Fig 1a), per GEVS (NASA’s General Environmental Verification Standard for spaceflight launch survival). Thermal Vacuum testing cycled the instrument between expected hot (+ 85 C) and cold survival temperatures, as well as +50 C and -25 C operational temps (Fig 1b). The instrument functioned nominally at the conclusion of vibration and thermal cycling tests. The Azure Kinect is manifested on the Nova-C lander which flies on the Intuitive Machines mission IM-2, landing at the lunar south pole for a mission duration of 14 days (one lunar daylight cycle). The unit will be integrated to the MAPP (Mobile Autonomous Prospecting Platform) rover at Lunar Outpost. The Azure Kinect with ToF feature will improve the resolution of lunar geology data near the south pole and enable ground-based VR experience of details of the lunar surface (Fig 1c).

V. Jha↗
NASA NTRS1996

The limits of palaeontological knowledge: finding the gold among the dross

Palaeontological interpretation rests on two interwoven sets of comparisons with the modern world. Palaeobiological interpretation relies on the placement of fossils within a phylogenetic and functional framework based primarily on the comparative biology of living organisms. Analogy to currently observable chemical, physical and taphonomic processes enables palaeoenvironmental inferences to be drawn from geological data. In older rocks, comparisons with the modern Earth can become tenuous, limiting palaeontological interpretation. The problem reaches its apogee in Archaean successions, yet pursuit of multiple lines of evidence establishes that complex microbial communities, fuelled by autotrophy and, likely, photoautotrophy, existed 3500 million years ago. Although Archaean palaeontology has to date focused on silicified coastal sediments, improved understanding of Earth's earliest biosphere may depend on the development of alternative environmental and taphonomic analogies. Spring precipitates and hydrothermal metal deposits are promising candidates. Terrestrial organisms may be of limited value in interpreting such fossils as may be found on Mars, although some points of comparison could prove general. Given limited opportunities for exploration, proper choice of environmental analogy is critical. Spring precipitates constitute excellent deposits for addressing questions of biology on another planet.

NASA Discipline Exobiology↗
NASA NTRS2016

A Model-Model and Data-Model Comparison for the Early Eocene Hydrological Cycle

A range of proxy observations have recently provided constraints on how Earth's hydrological cycle responded to early Eocene climatic changes. However, comparisons of proxy data to general circulation model (GCM) simulated hydrology are limited and inter-model variability remains poorly characterised. In this work, we undertake an intercomparison of GCM-derived precipitation and P - E distributions within the extended EoMIP ensemble (Eocene Modelling Intercomparison Project; Lunt et al., 2012), which includes previously published early Eocene simulations performed using five GCMs differing in boundary conditions, model structure, and precipitation-relevant parameterisation schemes. We show that an intensified hydrological cycle, manifested in enhanced global precipitation and evaporation rates, is simulated for all Eocene simulations relative to the preindustrial conditions. This is primarily due to elevated atmospheric paleo-CO2, resulting in elevated temperatures, although the effects of differences in paleogeography and ice sheets are also important in some models. For a given CO2 level, globally averaged precipitation rates vary widely between models, largely arising from different simulated surface air temperatures. Models with a similar global sensitivity of precipitation rate to temperature (dP=dT ) display different regional precipitation responses for a given temperature change. Regions that are particularly sensitive to model choice include the South Pacific, tropical Africa, and the Peri-Tethys, which may represent targets for future proxy acquisition. A comparison of early and middle Eocene leaf-fossil-derived precipitation estimates with the GCM output illustrates that GCMs generally underestimate precipitation rates at high latitudes, although a possible seasonal bias of the proxies cannot be excluded. Models which warm these regions, either via elevated CO2 or by varying poorly constrained model parameter values, are most successful in simulating a match with geologic data. Further data from low-latitude regions and better constraints on early Eocene CO2 are now required to discriminate between these model simulations given the large error bars on paleoprecipitation estimates. Given the clear differences between simulated precipitation distributions within the ensemble, our results suggest that paleohydrological data offer an independent means by which to evaluate model skill for warm climates.

Boundary conditions↗
NASA NTRS1973

Down-bucklng of a corner of a descending plate

A model of the earth's crust is presented as a set of rigid crustal blocks in which the crust is consumed, compressed, or created only at the boundaries of the blocks. As such the trench boundary moves with respect to the colliding plates because of down-buckling at the corner of the descending plate. It is further shown that this mechanism requires plate consumption of the descending plate at a rate faster than the relative plate motion, which in turn causes infilling of the basin behind the arc to compensate for the increased destruction. It is demonstrated that earthquake, heat flow, paleomagnetic, gravity anomaly, and geologic data derived from Japan and the Sea of Japan support the model.

Lowrey, B. E.↗