Search NASA⌕ Search

SEARCH · Search NASA

Results for “HUB”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Quasi-three-dimensional turbomachinery flow calculations on multiple hub-to-shroud stream surfaces

Results are presented from a quasi-three-dimensional calculation of steady (relative), inviscid, adiabatic, subsonic/shock-free transonic flow on multiple hub-to-shroud stream surfaces through turbomachinery blade rows. The quasi-three-dimensional technique incorporates some three-dimensional effects while retaining much of the simplicity of two-dimensional computational methods. Three typical turbomachinery flowfield calculations are presented including an axial-flow compressor rotor, a turbine stator vane cascade, and a radial-inflow turbine rotor. The calculations were performed using quasi-three-dimensional extensions of existing two-dimensional methods. The current results represent an intermediate step in the complete quasi-three-dimensional solution process. However, the results demonstrate the usefulness of the quasi-three-dimensional technique in complementing and extending the applicability of the two-dimensional methods of turbomachinery flow analysis.

Thompson, H. D.↗
NASA NTRS1985

Effects of inlet distortion on a static pressure probe mounted on the engine hub in an F-15 airplane

An inlet static pressure (PS2) probe was mounted on the hub of an F100 engine in an F-15 airplane. Flight test results showed that for low distortion conditions, the ratio of engine-face total pressure to static pressure agreed well with previous altitude facility data. Off-schedule operation of the inlet third ramp angle caused increased distortion of the inlet airflow during steady-state flight conditions. Data are shown for inlet third ramp excursions leading to engine stall. The relationships of inlet face total to static pressure ratio as a function of several distortion descriptors are also described.

Hughes, D. L.↗
NASA NTRS1988

Hub and blade structural loads measurements of an SA349/2 helicopter

Data from 23 flight conditions, including level flights ranging from advance ratio mu = 0.14 to 0.37 and steady turning flights from advance ratio mu = 0.26 to 0.35, are presented for an Aerospatiale SA349/2 Gazelle helicopter. The data include hub loads data (for 6 of the 23 conditions), blade structural data at eleven different blade radial stations, and fuselage structural data. All dynamic data are presented as harmonic analysis coefficients (ten harmonics per rotor revolution). The data acquisition and reduction procedures are also documented. Blade structural and inertial properties are provided in addition to control system geometry and properties.

Yamauchi, Gloria K.↗
NASA NTRS1991

The FM-007: An advanced jet commuter for HUB to spoke transportation

Due to the increasing need for new commuter aircraft, the FM-007 is proposed, a technologically advanced jet propelled short takeoff and landing (STOL) airplane. The proposed commuter is designed for hub to spoke air travel. In order to reduce drag, natural laminar flow technology is integrated into the design using the natural laminar flow airfoil section for the wing. A three lifting surface configuration provides for more efficient cruise flight. This unique design includes a small forward wing (canard), a rear mounted high aspect ratio main wing, and a small horizontal stabilizer high atop the vertical tail. These three surfaces act together to reduce drag by minimizing the downward force the horizontal stabilizer has to account for due to the nose down pitching moment. Commuter aircraft must also incorporate passenger comfort. This is achieved by providing a spacious pressurized cabin with a large galley and reduced cabin noise due to incorporation of noise reduction gear. A basic oval design is adopted, as opposed to a circular design in order to allow for the seating of five passengers abreast. To get STOL capability, an over the wing blown flap is used using a Rolls Royce Tay series engine.

Blouke, Peter Scott↗
NASA NTRS1920

The dynamometer hub

The construction of the dynamometer hub is illustrated and explained, and its electrical and aviation motor tests, as well as those in free flight, described.

Stieber, W↗
NASA NTRS1921

The Dynamometer Hub for the Testing Propellers and Engines During Flight

The need for a device to measure flight resistance, engine and propeller power, and efficiency during flight grew in proportion to the demand for increased flying capacity in military types of aircraft. Here, a dynamometer hub was inserted between the engine and the propeller. Taken as a whole, the tests that were conducted show that though the dynamometer is a sensitive instrument liable to numerous derangements, it is undeniably useful even in its present form, when handled with care and skill. Facilitating, as it does, the possibility of maintaining the fixed position of the engine, the blocking out of the weight effect when the plane is in the sloping position, and the possibility of taking direct measurements of force at the point of transmission, the dynamometer appears to be by far the best solution of the problem of a flying test bench, utilized as a hydraulic balance with the smallest possible measuring stroke and the least tendency to oscillation.

Enoch, O↗
NASA NTRS1954

Rotating stall investigation of 0.72 hub-tip ratio single-stage compressor

The rotating stall characteristics of a 0.72 hub-tip ratio, single-stage compressor were investigated. The stage was a 14-inch-diameter replica of the fourth stage of an experimental multistage compressor. No similarity existed between the frequency and propagation rate of the stall patterns observed in the single-stage replica and those observed in the multistage compressor after the fourth stage. A fatigue failure of the rotor blades occurred during the testing which was attributed to a resonance between the stall frequency and the natural bending frequency of the blades.

Graham, Robert W↗
NASA NTRS1929

The variation in engine power with altitude determined from measurements in flight with a hub dynamometer

The rate of change in power of aircraft engines with altitude has been the subject of considerable discussion. Only a small amount of data from direct measurements of the power delivered by airplane engines during flight, however, has been published. This report presents the results of direct measurements of the power delivered by a Liberty 12 airplane engine taken with a hub dynamometer at standard altitudes from zero to 13,000 feet. Six flights were made with the engine installed in a modified DH-4 airplane. The experimental relation of brake horsepower to altitude is compared with two theoretical relations and with the experimental results, for a second Liberty 12 engine, given in NACA Technical Report no. 252. The rate of change in power with altitude of a third Liberty engine, measured with a calibrated propeller, is also given for comparison. The data presented substantiate the theoretical relation of brake horsepower to altitude based on the correction of ground level indicated horsepower for change in atmospheric temperature and pressure with the subsequent deduction of friction horsepower corrected for altitude. (author)

Gove, W D↗
NASA NTRS1959

Experimental Investigation of a 0.35 Hub-Tip Radius Ratio Transonic Axial Flow Rotor Designed for 40 Pounds per Second per Square Foot with a Design Tip Diffusion Factor of 0.20

In order to determine the effect of a low design diffusion factor on the performance of a transonic axial-flow compressor rotor, a high-specific-flow rotor with a 0.35 hub-tip radius ratio was designed, fabricated and tested. This rotor used a design tip diffusion factor of 0.20 with a design corrected specific weight flow of 40 pounds per second per square foot of frontal area, a total-pressure ratio of 1.27, and an adiabatic efficiency of 0.96. The design, rotor performance, and blade element performance are presented with a discussion on rotor shock losses and a comparison with a similarly designed rotor with a tip diffusion factor of 0.35. At the design corrected tip speed of 1100 feet per second, a peak rotor adiabatic efficiency of 0.88 was attained at a corrected specific weight flow of 39 pounds per second per square foot of frontal area with a mass-averaged total-pressure ratio of 1.27. The blade element tip diffusion factor was 0.281, which is 0.08 higher than the design value of 0.20. Peak efficiencies of 0.95, 0.91, 0.89, and 0.85 were obtained at 70, 80, 90, and 110 percent of design speed, respectively. Comparison of the performance of the rotor reported herein and a similarly designed rotor with increased blade loading indicates that higher blade loading results in a more desirable rotor because of a higher pressure ratio and equivalent efficiency. Computed values of shock losses at the rotor tip section indicate that the losses at peak efficiency are primarily a function of shock losses since the profile losses are only a small percentage of the total loss.

Yasaki, Paul T.↗
NASA NTRS2006

The Development of Jomo Kenyatta International Airport as a Regional Aviation Hub

Air transportation plays an important role in the social and economic development of the global system and the countries that seek to participate in it. As Africa seeks to take its place in the global economy, it is increasingly looking to aviation as the primary means of connecting its people and goods with the world. It has been suggested that Africa as a continent needs to move toward a system of hubs to optimize its scarce resources. Jomo Kenyatta International Airport in Nairobi, Kenya, is one of the airports in the eastern region of Africa that is seeking to fill this role. This paper discusses the prospects for success and the challenges that it will need to overcome, including projections through 2020 for the growth in passenger and cargo traffic.

Irandu, Evaristus M.↗
NASA NTRS2006

A Simulation Based Approach for Contingency Planning for Aircraft Turnaround Operation System Activities in Airline Hubs

Commercial aircraft undergo a significant number of maintenance and logistical activities during the turnaround operation at the departure gate. By analyzing the sequencing of these activities, more effective turnaround contingency plans may be developed for logistical and maintenance disruptions. Turnaround contingency plans are particularly important as any kind of delay in a hub based system may cascade into further delays with subsequent connections. The contingency sequencing of the maintenance and logistical turnaround activities were analyzed using a combined network and computer simulation modeling approach. Experimental analysis of both current and alternative policies provides a framework to aid in more effective tactical decision making.

Adeleye, Sanya↗
NASA NTRS2004

Testing and Life Prediction for Composite Rotor Hub Flexbeams

A summary of several studies of delamination in tapered composite laminates with internal ply-drops is presented. Initial studies used 2D FE models to calculate interlaminar stresses at the ply-ending locations in linear tapered laminates under tension loading. Strain energy release rates for delamination in these laminates indicated that delamination would likely start at the juncture of the tapered and thin regions and grow unstably in both directions. Tests of glass/epoxy and graphite/epoxy linear tapered laminates under axial tension delaminated as predicted. Nonlinear tapered specimens were cut from a full-size helicopter rotor hub and were tested under combined constant axial tension and cyclic transverse bending loading to simulate the loading experienced by a rotorhub flexbeam in flight. For all the tested specimens, delamination began at the tip of the outermost dropped ply group and grew first toward the tapered region. A 2D FE model was created that duplicated the test flexbeam layup, geometry, and loading. Surface strains calculated by the model agreed very closely with the measured surface strains in the specimens. The delamination patterns observed in the tests were simulated in the model by releasing pairs of MPCs along those interfaces. Strain energy release rates associated with the delamination growth were calculated for several configurations and using two different FE analysis codes. Calculations from the codes agreed very closely. The strain energy release rate results were used with material characterization data to predict fatigue delamination onset lives for nonlinear tapered flexbeams with two different ply-dropping schemes. The predicted curves agreed well with the test data for each case studied.

Murri, Gretchen B.↗
NASA NTRS2009

IEEE 1394 Hub With Fault Containment

This innovation is designed to prevent a single end system communication node from negatively influencing the whole system s behavior so that the network system can still operate if an end node is faulty. Placing a hub (star) in the middle of the system prevents propagation of critical control information that other end systems would react to, like block reset messages.

Paulitsch, Michael↗
NASA NTRS2013

Evaluating NMME Seasonal Forecast Skill for use in NASA SERVIR Hub Regions

The U.S. National Multi-Model Ensemble seasonal forecasting system is providing hindcast and real-time data streams to be used in assessing and improving seasonal predictive capacity. The coupled forecasts have numerous potential applications, both national and international in scope. The NASA / USAID SERVIR project, which leverages satellite and modeling-based resources for environmental decision making in developing nations, is focusing on the evaluation of NMME forecasts specifically for use in driving applications models in hub regions including East Africa, the Hindu Kush- Himalayan (HKH) region and Mesoamerica. A prerequisite for seasonal forecast use in application modeling (e.g. hydrology, agriculture) is bias correction and skill assessment. Efforts to address systematic biases and multi-model combination in support of NASA SERVIR impact modeling requirements will be highlighted. Specifically, quantilequantile mapping for bias correction has been implemented for all archived NMME hindcasts. Both deterministic and probabilistic skill estimates for raw, bias-corrected, and multi-model ensemble forecasts as a function of forecast lead will be presented for temperature and precipitation. Complementing this statistical assessment will be case studies of significant events, for example, the ability of the NMME forecasts suite to anticipate the 2010/2011 drought in the Horn of Africa and its relationship to evolving SST patterns.

Roberts, J. Brent↗
NASA NTRS1939

A Flight Determination of the Moments of the YG-1B Tapered Blade Rotor about the Hub Trunnions

At the request of the Materiel Division, Wright Field, the National Advisory Committee for Aeronautics is conducting a program of flight tests on a Kellett YG-1B autogiro equipped with a new type of rotor blade. The new blades are tapered in both plan form. and thickness and are designed to avoid periodic blade twist. One phase of the investigation, involving determination of the moments of the resultant rotor force about the trunnions on which the hub is pivoted for control, has been completed. The results obtained are reported herein.

Bailey, F. J., Jr.↗
NASA NTRS2021

The Salinity Pilot-Mission Exploitation Platform (Pi-MEP): A Hub for Validation and Exploitation of Satellite Sea Surface Salinity Data

The Pilot-Mission Exploitation Platform (Pi-MEP) for salinity is an ESA initiative originally meant to support and widen the uptake of Soil Moisture and Ocean Salinity (SMOS) mission data over the ocean. Starting in 2017, the project aims at setting up a computational web-based platform focusing on satellite sea surface salinity data, supporting studies on enhanced validation and scientific process over the ocean. It has been designed in close collaboration with a dedicated science advisory group in order to achieve three main objectives: gathering all the data required to exploit satellite sea surface salinity data, systematically producing a wide range of metrics for comparing and monitoring sea surface salinity products’ quality, and providing user-friendly tools to explore, visualize and exploit both the collected products and the results of the automated analyses. The Salinity Pi-MEP is becoming a reference hub for the validation of satellite sea surface salinity missions by providing valuable information on satellite products (SMOS, Aquarius, SMAP), an extensive in situ database (e.g., Argo, thermosalinographs, moorings, drifters) and additional thematic datasets (precipitation, evaporation, currents, sea level anomalies, sea surface temperature, etc.). Co-localized databases between satellite products and in situ datasets are systematically generated together with validation analysis reports for 30 predefined regions. The data and reports are made fully accessible through the web interface of the platform. The datasets, validation metrics and tools (automatic, user-driven) of the platform are described in detail in this paper. Several dedicated scientific case studies involving satellite SSS data are also systematically monitored by the platform, including major river plumes, mesoscale signatures in boundary currents, high latitudes, semi-enclosed seas, and the high-precipitation region of the eastern tropical Pacific. Since 2019, a partnership in the Salinity Pi-MEP project has been agreed between ESA and NASA to enlarge focus to encompass the entire set of satellite salinity sensors. The two agencies are now working together to widen the platform features on several technical aspects, such as triple-collocation software implementation, additional match-up collocation criteria and sustained exploitation of data from the SPURS campaigns

ocean↗
NASA NTRSDate not supplied

Urban Air Mobility Traffic Analysis Tool for Airspace Involving Vertiport Hub Operations to Examine Simulated Conflicts

Presented herein are details of the development of an Urban Air Mobility Traffic Analysis Tool (UAM TAT), designed to analyze the traffic of Vertical Take-off and Landing (VTOL) air-craft in urban agglomerations to enable the Urban Air Mobility(UAM) operations. The tool aims to address challenges of UAM operations in a simulated airspace by testing different scenarios and methods for air traffic management. It emphasizes the need for effective risk management practices and methodologies to ensure the safety of operations, given the increasing use of highly automated aircraft (i.e., Advanced Air Mobility (AAM))in urban environments. The tool is modular and allows for the simulation of various families of VTOLs and different air traffic rules, making it suitable for defining and estimating airspace and vertiports capacity, determining VTOL requirements, and testing and comparing air traffic management methods. The results of five different simulations are presented that show the capabilities and functionalities of the tool. The simulations present the impact of vertiport hub operations and various ATM approach on the VTOLs’ conflicts.

Urban Air Mobility↗