Study of printability and porosity formation in laser powder bed fusion built hydride-dehydride (HDH
Explore the source record for details and available documents.
Wu, Ziheng↗
SEARCH · Search NASA
Results for “Hydride Formation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
CO 2 Hydrogenation to Formate and Formic Acid by Bimetallic Palladium–Copper Hydride Clusters
Mass spectrometric analysis of the anionic products of interaction between bimetallic palladium-copper tetrahydride anions, PdCuH 4 – , and carbon dioxide, CO 2 , in a reaction cell shows an efficient generation of the PdCuCO 2 H 4 – intermediate and formate/formic acid complexes. Multiple structures of PdCuH 4 – and PdCuCO 2 H 4 – are identified by a synergy between anion photoelectron spectroscopy and quantum chemical calculations. The higher energy PdCuH 4 – isomer is shown to drive the catalytic hydrogenation of CO 2 , emphasizing the importance of accounting for higher energy isomers for cluster catalytic activity. In conclusion, this study represents the first example of CO 2 hydrogenation by bimetallic hydride clusters.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
The deformation and burst behavior of Zircaloy-4 cladding tubes with hydride rim features subject to internal pressure loads
This study is motivated by the desire to conduct a separate effects test replicating specific aspects of an in-pile pulse reactor test on high exposure light water reactor (LWR) fuel rods. The principal purpose of the tests was to determine whether temperature and or hydrogen concentration thresholds exist in assessing the vulnerability of a stress relieved zirconium alloy cladding tubes to low strain ruptures. A secondary objective was to determine whether observations of the cladding stress during deformation could aid in the understanding of the crack formation and propagation in cladding tubes with hydride rim features. Here, the study utilized artificially hydrided Zircaloy-4 cladding tubes and an isothermal, internal pressure test that was controlled with an in-situ strain measurement. The test results show a clear transition in failure vulnerability between room temperature and 150 °C. Below 150 °C, cladding tubes rupture at very low uniform plastic strain—even at relatively modest cladding hydrogen levels. At and above 150 °C, cladding tubes only rupture at low uniform plastic strain if the cladding hydrogen content is greater than 500 ppm and usually experience at least some modest amount of plastic deformation prior to rupture. Post-test metallographs from non-ruptured cladding tubes show numerous primary cracks forming in the hydride rim and arresting at the metal/hydride interface. This observation combined with the decrease in bulk yielding of hydrided cladding tubes when compared to fresh non-hydrided tubes leads to the conclusion that the fracture stress of the hydride rims is related to and bounded by the yield stress of the zirconium metal. Some evidence is presented for a change in crack propagation mechanism from one of void formation on hydride plates and linkage at temperatures below 150 °C to more classical ductile shearing beneath the primary crack tip at temperatures above 150 °C. This apparent change in crack propagation mechanism may help explain the observed temperature and hydrogen concentration thresholds.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Synthesis and Reactivity of Heteroleptic U 4+ Alkyl, Benzyl, and Hydride Imidophosphorane Complexes
A series of heteroleptic U 4+ benzyl, neopentyl, and methyl complexes supported by the imidophosphorane ligand, [N = P(N,N′-ditert-butylethylenediamide)(diethylamide)] 1− (NP*), were synthesized from the monoiodide precursor, [UI(NP*) 3 ]. These heteroleptic complexes were synthesized through the selective formation of [UI(NP*) 3 ] under transmetalation conditions in the reaction between [UI 4 (1,4-dioxane) 2 ] and K[NP*]. Formation of the homoleptic complex [U(NP*) 4 ] was not observed even in the presence of excess K[NP*]. The oxidation and hydrogenolysis reactivity of the neopentyl complex, [U(Npt)- (NP*) 3 ] (Npt = neopentyl) was explored. While cyclic voltammetry indicates a potentially isolable U5+ alkyl cation, chemical oxidation of the neopentyl complex results in the isolation of a cationic U 4+ complex with a bound diethyl ether in the primary coordination sphere, [U4+(NP*)) 3 (Et 2 O)][(BArF 24 )] (BArF 24 = tetrakis(3,5-bis(trifluoromethyl)phenyl)borate). Notably, hydrogenolysis of [U(Npt)(NP*) 3 ] with H2 gas at −20 °C results in the formation of a terminal hydride intermediate confirmed by in situ NMR spectroscopy and deuterium labeling with D 2 . The connectivity and structural parameters of this hydride intermediate, [UH(NP*) 3 ], which rapidly thermally decomposes to the homoleptic complex, [U(NP*) 4 ], can be confirmed by single-crystal X-ray diffraction studies of a crystal grown by chilling the reaction mixture. The identity of [U(NP*) 4 ] was confirmed by its direct, bulk synthesis from [U(Me)(NP*) 3 ] and HNP* in a protonolysis reaction.
Alkyls↗
Comprehensive Mechanisms of Electrocatalytic CO2 Reduction by [Ir(bip)(ppy)(CH3CN)](PF6)2
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
Dislocation line tension model to improve understanding of the effects of hydrogen on the deformation of structural materials
Decarbonization efforts highlight hydrogen as an attractive alternative to fossil fuels, but its tendency to embrittle structural metals demands careful consideration when designing hydrogen infrastructure. Moreover, the mechanisms by which hydrogen degrades these materials are still being elucidated. The current work develops new computational tools to quantify the different contributions of hydrogen to the energy barrier of cross-slip, a key deformation mechanism. Novel features are implemented to a line tension model, which include the use of non-singular dislocation interactions, character-dependent dislocation energies and simulations of the constriction configurations. A new molecular dynamics technique is developed to calculate the interaction energy between the partials of a dissociated dislocation via fixing the centers of mass of the regions below and above the Shockley partials and performing time-averaged calculations. Hydrogen is found to impact the stacking fault width of dislocations in different ways depending on their characters: it decreases for dislocations with a character θ > 30°, remains unchanged for θ = 30° and increases for θ < 30°. The latter regime is a newly identified mechanism by which hydrogen inhibits cross-slip. Moreover, formation of nano-hydrides is predicted to occur around screw dislocations for high hydrogen concentrations, a phenomenon previously identified only in dislocations with an edge component. If nano-hydrides develop, their influence extending the equilibrium stacking fault width and increasing both the constriction and cross-slip energy barriers dominate over all other hydrogen contributions. The theory and tools developed will pave the way towards a comprehensive understanding of hydrogen-dislocation interactions in structural metals.
08 HYDROGEN↗
Tritium diffusion and formation in the bulk and defective surface of γ-LiAlO2 pellets: First-principles investigation
In tritium-producing burnable absorber rods (TPBAR), γ-LiAlO2 is used in the form of an annular ceramic pellet enriched with the 6Li isotope. When irradiated in a pressurized water reactor (PWR), the <sup>6</sup>Li pellets absorb neutrons and produce tritium (<sup>3</sup>H) through <sup>6</sup>Li + n <sup>3</sup>H + α. The 3H chemically reacts with the metal getter where it is captured and leads to formation of a metal hydride. For TPBARs to enable effective tritium production in PWRs, we investigated the <sup>3</sup>H diffusion pathways in the bulk and surface of γ-LiAlO<sub>2</sub> with different concentrations of lithium defects. The calculated results for bulk and low-index surfaces, thermal conductivity, 3H activation energy barriers, and the 3H diffusion coefficients in γ-LiAlO<sub>2</sub> are in good agreement with the available experimental values. In the bulk, our results show that the smallest activation energy barrier is 0.63 eV for substitutional <sup>3</sup>H diffusion with a diffusion coefficient of 3.25x10<sup>-12</sup> m<sup>2</sup>/s. After <sup>3</sup>H diffused from bulk to the surface, it could form different species (such as <sup>3</sup>H<sub>2</sub>, <sup>3</sup>H<sub>2</sub>O, C<sup>3</sup>H<sub>4</sub>) depending on the surface structure, vacancy types and the impurity carbon. Our results indicate that the <sup>3</sup>H<sub>2</sub> is the main product from γ-LiAlO<sub>2</sub> pellets. As the number of V<sub>Li</sub> vacancies and <sup>3</sup>H atoms increases under irradiation (<sup>3</sup>H-rich condition), <sup>3</sup>H<sub>2</sub>O release could increase from the surface of γ-LiAlO<sub>2</sub> pellets.
Jia, Ting↗
Kinetics of Hydride Transfer from Catalytic Metal-Free Hydride Donors to CO2
Selective reduction of CO 2 to formate represents an ongoing challenge in photoelectrocatalysis. To provide mechanistic insights, we investigate the kinetics of hydride transfer (HT) from a series of metal-free hydride donors to CO 2 . The observed dependence of experimental and calculated HT barriers on the thermodynamic driving force was modeled by using the Marcus hydride transfer formalism to obtain the insights into the effect of reorganization energies on the reaction kinetics. Our results indicate that even if the most ideal hydride donor were discovered, the HT to CO 2 would exhibit sluggish kinetics (<100 turnovers per second at -0.1 eV driving force), indicating that the conventional HT may not be an appropriate mechanism for solar conversion of CO 2 to formate. We propose that the conventional HT mechanism should not be considered for CO 2 reduction catalysis and argue that the orthogonal HT mechanism, previously proposed to address thermodynamic limitations of this reaction, may also lead to lower kinetic barriers for CO 2 reduction to formate.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Mechanistic roles of metal- and ligand-protonated species in hydrogen evolution with [Cp*Rh] complexes
Protonation reactions involving organometallic complexes are ubiquitous in redox chemistry and often result in the generation of reactive metal hydrides. However, some organometallic species supported by η 5 -pentamethylcyclopentadienyl (Cp*) ligands have recently been shown to undergo ligand-centered protonation by direct proton transfer from acids or tautomerization of metal hydrides, resulting in the generation of complexes bearing the uncommon η 4 -pentamethylcyclopentadiene (Cp*H) ligand. Here, time-resolved pulse radiolysis (PR) and stopped-flow spectroscopic studies have been applied to examine the kinetics and atomistic details involved in the elementary electron- and proton-transfer steps leading to complexes ligated by Cp*H, using Cp*Rh(bpy) as a molecular model (where bpy is 2,2′-bipyridyl). Stopped-flow measurements coupled with infrared and UV-visible detection reveal that the sole product of initial protonation of Cp*Rh(bpy) is [Cp*Rh(H)(bpy)] + , an elusive hydride complex that has been spectroscopically and kinetically characterized here. Tautomerization of the hydride leads to the clean formation of [(Cp*H)Rh(bpy)] + . Variable-temperature and isotopic labeling experiments further confirm this assignment, providing experimental activation parameters and mechanistic insight into metal-mediated hydride-to-proton tautomerism. Spectroscopic monitoring of the second proton transfer event reveals that both the hydride and related Cp*H complex can be involved in further reactivity, showing that [(Cp*H)Rh] is not necessarily an off-cycle intermediate, but, instead, depending on the strength of the acid used to drive catalysis, an active participant in hydrogen evolution. Identification of the mechanistic roles of the protonated intermediates in the catalysis studied here could inform design of optimized catalytic systems supported by noninnocent cyclopentadienyl-type ligands.
08 HYDROGEN↗
Synthesis, Structure, and Electric Conductivity of Higher Hydrides of Ytterbium at High Pressure
While most of the rare-earth metals readily form trihydrides, due to increased stability of the filled 4f electronic shell for Yb(II), only YbH 2.67 , formally corresponding to Yb II (Yb III H 4 ) 2 (or Yb 3 H 8 ), remains the highest hydride of ytterbium. Utilizing the diamond anvil cell methodology and synchrotron powder X-ray diffraction, we have attempted to push this limit further via hydrogenation of metallic Yb and Yb 3 H 8 . Compression of the latter has also been investigated in a neutral pressure-transmitting medium (PTM). While the in situ heating of Yb facilitates the formation of YbH 2+x hydrides, we have not observed clear qualitative differences between the systems compressed in H 2 and He or Ne PTM. In all of these cases, a sequence of phase transitions occurred within ca. 13–18 GPa (P$\bar{31}$m–I4/m phase) and around 27 GPa (to the I4/mmm phase). The molecular volume of the systems compressed in H 2 PTM is ca. 1.5% larger than of those compressed in inert gases, suggesting a small hydrogen uptake. Nevertheless, hydrogenation toward YbH 3 is incomplete, and polyhydrides do not form up to the highest pressure studied here (ca. 75 GPa). As pointed out by electronic transport measurements, the mixed-valence Yb 3 H 8 retains its semiconducting character up to >50 GPa, although the very low remnant activation energy of conduction (<5 meV) suggests that metallization under further compression should be achievable. Finally, we provide a theoretical description of a hypothetical stoichiometric YbH 3 .
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Reducing waste of the hydride-dehydride process for U-6 wt% Nb spherical powders through lower impact and targeted milling
The breakdown of solid metal into powder during the hydride-dehydride process is commercially important for the formation of titanium and other metal powders. Typically, the milling of the brittle hydride powder occurs in a ball mill, where milling media impacts powder particles to break them down. The milling media can impact particles that are larger than desired, as desired, or smaller than desired, indiscriminately making all particles smaller. In this work, we investigate how to minimize waste powder production during milling using two different milling methods, planetary ball milling and milling in a sieve shaker (sieve-milling). Both processes yielded similar amounts of 20–75 μm diameter powder (the target size range); however, sieve-milling generated a significantly smaller amount of undersized waste powder. The powders were characterized by X-ray diffraction, SEM/STEM, and magnetic susceptibility. Several differences between ball milling and sieve-milling processes are discussed. We then conclude that the decreased yield of undersized powder in sieve-milling was due to a combination of lower impact energy in sieve-milling, unreacted metallic cores in the hydride flakes, and the ability to mill target particle sizes during sieve-milling. While these results are from the milling of brittle hydride powder, similar methods may be applicable to other brittle powders, including ceramics or salts.
Chemistry↗
Aldehyde and Ketone Hydroboration Mediated by a Heterogeneous Single–Site Molybdenum–Dioxo Catalyst: Scope and Mechanistic Implications
Efficient hydroboration of aldehydes and ketones is demonstrated using a single-site MoO 2 catalyst supported on activated carbon. Under mild conditions with low catalytic loadings, the reaction exhibits chemoselectivity towards carbonyl reduction over halides, alkene, alkyne, nitrile, and ester groups, affording high yields of desired products. Furthermore, competition studies between aldehyde and ketone reduction using HBpin and HBcat indicate that HBpin preferably functionalizes aldehydes, while HBcat can functionalize either substrate under specific conditions. Mechanistic studies suggest that the reaction proceeds via the initial formation of a molybdenum-hydride species upon B–H activation and subsequent molybdenum-alkoxide species upon carbonyl activation by the Mo center. The experimental activation energy of 14.3 kcal/mol alignssatisfactorily with the DFT computed ΔH ≠ of 18.7 kcal/mol, further supporting the proposed mechanism. Combined experimental/computational analyses reveal that excess HBpin can possibly deactivate the catalyst. The presence of excess benzaldehyde efficiently mitigates deactivation by HBpin, providing significantly higher catalyst recyclability. Altogether, this non-toxic, air- and moisture-stable, active, and selective catalyst demonstrates significant potential for green processes.
08 HYDROGEN↗
Hydrogen Evolution Mediated by Cobalt Diimine‐Dioxime Complexes: Insights into the Role of the Ligand Acid/Base Functionalities.
Abstract The benchmarking of the performance for H 2 evolution of cobalt diimine‐dioxime catalysts is provided based on a comprehensive study of their catalytic mechanism. The latter follows an ECE'CC pathway with intermediate formation of a Co(II)‐hydride intermediate and second protonation possibly at a basic site of the ligand, acting as a proton relay. This suggests an intramolecular coupling between the hydride and protonated ligand as the proton concentration‐independent rate‐determining step controlling the turnover frequency for H 2 evolution.
Sun, Dongyue↗
Intrinsic Chemical Reactivity of Silicon Electrode Materials: Gas Evolution
In this work, we explore how the chemical reactivity toward an aprotic battery electrolyte changes as a function of lithium salt and silicon surface termination chemistry. The reactions are highly correlated, where one decomposition reaction leads to a subsequent decomposition reaction. We report the data show that the presence of silicon hydrides (SiH$_x$) promotes the formation of CO gas, while surface oxides SiO$_x$ drive the formation of CO 2 . The extent and rate of oxidation depend on the surface basicity of the SiO 2 surface species. The most acidic surfaces seem to hinder CO 2 generation but not the decomposition of the salt. Indeed, the presence of F-containing salts (LiPF 6 and LiTFSI) promotes the reactions between carbonate electrolyte and silicon surfaces. Surfaces with high Li content seem to be the most passivating to gassing reactions, pointing to a pathway to stabilize the interfaces during cell formation and assembly.
25 ENERGY STORAGE↗
Developing machine-learning potentials to study properties of the tritium formation and diffusivity in pure and defective Zircaloy-4 getters
Objective of this work was to study the formation of Sn impurity and hydride phases in Zr and study their impacts on the diffusion kinetics of 3 H by using DFT based ML approach. By implementing deep neural potential (DNP) technique, we developed potential for Zr-H and Sn impurity systems and validated the DNP by using DFT results. We found that by implementing machine learning approach, it is possible to achieve accuracy comparable to DFT level for the more realistic models by using less computational time and resources.
36 MATERIALS SCIENCE↗
Back to functional hydrides: Effects of neutron-irradiated microstructure on hydrogen retention in yttrium hydride
Functional hydrides are promising candidates for advanced nuclear reactors, particularly in portable or transportable applications, due to their high hydrogen-retention capabilities, enabling efficient neutron moderation, and compact reactor design. However, hydrogen mobility in hydrides at elevated irradiation temperatures poses significant technological challenges, necessitating a comprehensive understanding of their irradiation behavior. Furthermore, this study investigated the microstructural and chemical stability of neutron-irradiated yttrium hydrides to assess their hydrogen-retention capacity. A targeted literature review was also conducted to contextualize neutron-irradiation effects on functional hydrides with regards to structural stability and hydrogen retention. Experimental characterizations revealed that, at high temperatures, irradiated hydrides retained their phase stability, which was likely enhanced by irradiation-induced microstructure evolution. Notably, an amorphous yttrium and oxygen -rich surface layer was present at the free surface of the hydride. Its thickness decreased while a continuous crystalline Y-O-rich layer was formed with increasing neutron damage. Additionally, the number density of dislocation loops and cavities generally increased as a function of neutron dose. First-principles calculations of hydrogen behavior within yttrium vacancy clusters in yttrium hydrides demonstrated vacancy-size-dependent hydrogen stability and configuration, highlighting the role of vacancy geometry in regulating hydrogen retention. Thus, the presence of irradiation-induced dislocation loops and cavities were hypothesized to improve hydrogen retention. Collectively, these findings advance the understanding of hydride behavior under neutron irradiation as well as their technological readiness for portable or transportable nuclear reactors.
Defect clusters↗
Economizing on Precious Metals in Three-Way Catalysts: Thermally Stable and Highly Active Single-Atom Rhodium on Cera for NO Abatement under Dry and Industrially Relevant Conditions
We show for the first time that atomically dispersed Rh cations on ceria, prepared via high-temperature atom trapping synthesis, are the active species for (CO+NO) reaction. This provides a direct link with the organometallic homogeneous Rh(I) complexes capable of catalyzing dry (CO+NO) reaction but without the stability concern. In particular, thermally stable Rh cations in 0.1wt% Rh1/CeO2 achieve full NO conversion with a TOF of ~ 330 hr-1 per Rh atom at 120 °C. Under dry conditions, the main product above 100 °C is N2 with N2O being the minor product. The presence of water promotes low-temperature activity of 0.1wt% Rh1/CeO2 starting at 50 °C with full NO conversion at ~120 °C. In the case with the wet stream, however, ammonia and nitrogen are the main products with only minor N2O amounts. NH3 formation at such low temperatures is attractive because of the potential to use this as a passive SCR system. Because of the uniformity of Rh ions on the support, we are able to observe the intermediates of (CO+NO) reaction via infrared measurements on Rh cations on zeolite and ceria. Furthermore, we show that ammonia formation correlates with the WGS activity of the material and thus, rhodium hydride Rh-H species are involved in this reaction: we detect Rh(CO)Hx species on ceria using isotopic IR measurements. These findings provide new mechanistic understanding for the catalytically active species in TWC catalysis and open up a new avenue for the synthesis of novel emissions control catalysts with 100% atom economy of ultra-expensive precious metals such as Rh.
Khivantsev, Konstantin↗
Mechanistic Insights into CO 2 Electroreduction on Ni 2 P: Understanding Its Selectivity toward Multicarbon Products
Recently, nickel phosphides (Ni x P y ) have been reported to enable selective electrochemical formation of multicarbon products (C 3 and C 4 ) via the CO 2 reduction reaction (CO 2 RR); nevertheless, their activities remain low. In order to understand the roots of their high selectivity and low activity and to direct the design of more active Ni x P y -based CO 2 RR catalysts, we investigate the CO 2 RR mechanism on Ni 2 P using density functional theory (DFT) calculations. Iin this work, we reveal that the reaction proceeds through the formate pathway, followed by formaldehyde (H 2 CO*) formation and self-condensation. Moreover, we demonstrate that surface hydride transfer steps, along with surface-mediated C–C coupling, are essential in order to avoid C 1 product formation and boost selectivity toward multicarbon products. In addition, we find that the thermal surface hydride transfer from the surface to the physisorbed CO 2 is one of the key rate-limiting steps, and since it is not electroactive, it cannot be accelerated by applying an overpotential. Finally, our results also show that the hydrogen affinity of the surface and the dynamic surface reconstruction via H adsorption facilitate selective CO 2 reduction and C–C coupling on Ni 2 P. These findings provide an impetus for exploring materials design space to identify the physical principles that govern the thermodynamics of rate-limiting thermal steps in electrocatalytic processes.
36 MATERIALS SCIENCE↗