Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrogels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Immobilization of active ammonia-oxidizing archaea in hydrogel beads

Abstract Ammonia-oxidizing archaea (AOA) are major players in the nitrogen cycle but their cultivation represents a major challenge due to their slow growth rate and limited tendency to form biofilms. In this study, AOA was embedded in small (~2.5 mm) and large (~4.7 mm) poly(vinyl alcohol) (PVA)—sodium alginate (SA) hydrogel beads cross-linked with four agents (calcium, barium, light, or sulfate) to compare the differences in activity, the diffusivity of nitrogen species (NH 4 + , NO 2 − , and NO 3 − ), and polymer leakage in batch systems over time. Sulfate-bound PVA-SA beads were the most stable, releasing the lowest amount of polymer without shrinking. Diffusion coefficients were found to be 2 to 3 times higher in hydrogels than in granules, with ammonium diffusivity being ca . 35% greater than nitrite and nitrate. Despite a longer lag phase in small beads, embedded AOA sustained a high per volume rate of ammonia oxidation compatible with applications in research and wastewater treatment.

42 ENGINEERING↗
DOE OSTI2021

Conductive and anti-freezing hydrogels constructed by pseudo-slide-ring networks

In this work, stretchable, tough, and anti-freezing hydrogels were prepared using partially carboxymethylated polyrotaxanes and polyacrylamides. The carboxylic acid groups of α-cyclodextrins in the polyrotaxane and the amide groups in polyacrylamide are hydrogen-bonded, affording a pseudo-slide-ring network, greatly enhancing the hydrogels’ macroscale mechanical properties, anti-freezing features, and electrical conductivity for the fabrication of a cold-temperature strain sensor.

36 MATERIALS SCIENCE↗
DOE OSTI2023

3D-printed ketoenamine crosslinked polyrotaxane hydrogels and their mechanochromic responsiveness

A ketoenamine-based dynamic covalent crosslinker was introduced here to α-cyclodextrin-based polypseudorotaxanes, forming viscoelastic hydrogels for direct-ink-write 3D printing. The irreversible enol–keto tautomerization imparts high chemical stability to the extensively crosslinked polyrotaxane hydrogels, which showed mechanochromic responsiveness in the presence of the integrated fluorophores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Role of supramolecular polymers in photo-actuation of spiropyran hydrogels

Supramolecular-covalent hybrid spiropyran hydrogels are developed to generate robotic functions in response to light. The morphology of supramolecular phases is found to play a critical role in mechanical photo-actuation of these hybrid hydrogels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Interpreting T-History Data on Supercooling and Phase Change Enthalpy of a Salt-Hydrogel Complex for Building Thermal Management

Phase change materials (PCMs) are promising materials for storing and discharging latent heat in buildings to regulate the thermal environment. Measurement of salt hydrate PCM thermal performance is often challenging because of supercooling and phase segregation. Though differential scanning calorimetry (DSC) has been widely used to measure thermal properties of various phase change materials, DSC uses milligrams of sample and is unrealistic for predicting large-scale materials performance. The T-history method [1], in contrast, handles higher volumes but the analysis typically requires a lumped capacitance assumption. Here, we report and analyze T-History data on a novel salt-hydrogel complex with high viscosity, that renders low Biot number sample preparation extremely challenging. We re-examine the standard T-history method and compared against DSC data in this complex material. We report details of an experimental setup, built with necessary additions to a controlled environmental chamber. We carefully examine the validity of the lumped capacitance assumption and suggest a modified analysis using a computational approach for reliable data. Experimental parameters such as ramp rate and temperature range of the environmental chamber are considered via computational modeling to understand the effect of ramp rate on supercooling [2]. Finally, we report thermal cycling experiments on the salt-hydrogel complex. Our modified approach to measuring supercooling and enthalpy of fusion at large scales is important in better understanding the performance of phase-change materials at scale for building thermal storage. References: [1] Marin, Jose M, Belen Zalba, Luisa F Cabeza, and Harald Mehling. “Determination of Enthalpy Temperature Curves of Phase Change Materials with the Temperature-History Method: Improvement to Temperature Dependent Properties.” Measurement Science and Technology 14, no. 2 (February 1, 2003): 184–89. https://doi.org/10.1088/0957-0233/14/2/305. [2] Safari, A., R. Saidur, F.A. Sulaiman, Yan Xu, and Joe Dong. “A Review on Supercooling of Phase Change Materials in Thermal Energy Storage Systems.” Renewable and Sustainable Energy Reviews 70 (April 2017): 905–19. https://doi.org/10.1016/j.rser.2016.11.272

thermodynamics↗
DOE OSTI2022

Mucus-Inspired Tribology, a Sticky Yet Flowing Hydrogel

The mucus blanket can trap foreign particles before they enter the lungs, while at the same time, it flows up to remove these particles. This manifests the dual nature of mucus: sticky, on one hand, and fluid, on the other. Inspired by this function of mucus in the lungs, we designed a mucus simulant which emulates this dual nature. While many existing mucus simulants do not target bioadhesion particularly, poly(vinyl alcohol) (PVA)-based simulants make an exception. Despite their bioadhesion tendency, unlike mucus, they do not gelate. In this study, we added a physical cross-linking agent to PVA in order to add the gelation aspect and to better represent mucous properties. We show that the resultant mucus simulant develops into two regions: a highly sticky region near the surface of a foreign object (we used hydrophobized silicon to mimic the foreign object) and a fluid region far away from that surface. We show that the sticky part can slide past the less sticky part, while the foreign object is stuck to it. However, this mechanism changes with time. At short gelation times, this tendency to separate into two parts is enhanced and the foreign object remains stuck, while the rest of the gel flows. With time, the force required to allow the sticky part to slide over the fluid part is further reduced. However, if the gelation is allowed to proceed for even longer times without disturbance, the force required to slide the two parts past each other increases and the separation between the two parts is inhibited. The hydrogel becomes a sticky goo, which requires a higher force to move or unclog if placed in a duct (much like what happens with mucus in the tracheal duct). We explain the physics of our findings in terms of a competition between the tendency of the polymer to form a gel network and the tendency of the polymer to adsorb onto the foreign object.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Unusual Temperature Dependence of Water Sorption in Semicrystalline Hydrogels

Abstract Water vapor sorption is a ubiquitous phenomenon in nature and plays an important role in various applications, including humidity regulation, energy storage, thermal management, and water harvesting. In particular, capturing moisture at elevated temperatures is highly desirable to prevent dehydration and to enlarge the tunability of water uptake. However, owing to the thermodynamic limit of conventional materials, sorbents inevitably tend to capture less water vapor at higher temperatures, impeding their broad applications. Here, an inverse temperature dependence of water sorption in poly(ethylene glycol) (PEG) hydrogels, where their water uptake can be doubled with increasing temperature from 25 to 50 °C, is reported. With mechanistic modeling of water–polymer interactions, this unusual water sorption is attributed to the first‐order phase transformation of PEG structures, and the key parameters for a more generalized strategy in materials development are identified. This work elucidates a new regime of water sorption with an unusual temperature dependence, enabling a promising engineering space for harnessing moisture and heat.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Reinforced double-threaded slide-ring networks for accelerated hydrogel discovery and 3D printing

Traditionally, slide-ring gels are stretchable but soft as a result of an elasticity-stretchability trade-off. Herein, we introduce a new approach to breaking this trade-off and creating reinforced slide-ring networks with mobile crosslinkers. Our approach involves the construction of a polyethylene glycol double-threaded γ-cyclodextrin-based pro-slide-ring crosslinker that serves as a modular component for 3D printing and copolymerization. The resulting crystalline-domain-reinforced slide-ring hydrogels, or CrysDoS-gels, exhibit both high elasticity and high stretchability. The modular synthesis allows for high-throughput synthesis of CrysDoS-gels, generating a large amount of data for structure-property analysis. Here, by employing data science techniques, such as machine learning and linear regression, not only were we able to identify which chemical components influence the mechanical properties of CrysDoS-gels, but this analysis also aided in the discovery of better-performing CrysDoS-gels. Finally, we demonstrate the potential application of the newly discovered CrysDoS-gels as sensing devices by 3D printing them as stress sensors with high sensitivity and a broad detection range.

3D-printing↗
DOE OSTI2024

Prioritization of Early-Stage Research and Development of a Hydrogel-Encapsulated Anaerobic Technology for Distributed Treatment of High Strength Organic Wastewater

This study aims to support the prioritization of research and development (R&D) pathways of an anaerobic technology leveraging hydrogel-encapsulated biomass to treat high-strength organic industrial wastewaters, enabling decentralized energy recovery and treatment to reduce organic loading on centralized treatment facilities. To characterize the sustainability implications of early-stage design decisions and to delineate R&D targets, an encapsulated anaerobic process model was developed and coupled with design algorithms for integrated process simulation, techno-economic analysis, and life cycle assessment under uncertainty. Across the design space, a single-stage configuration with passive biogas collection was found to have the greatest potential for financial viability and the lowest life cycle carbon emission. Through robust uncertainty and sensitivity analyses, we found technology performance was driven by a handful of design and technological factors despite uncertainty surrounding many others. Hydraulic retention time and encapsulant volume were identified as the most impactful design decisions for the levelized cost and carbon intensity of chemical oxygen demand (COD) removal. Encapsulant longevity, a technological parameter, was the dominant driver of system sustainability and thus a clear R&D priority. Ultimately, we found encapsulated anaerobic systems with optimized fluidized bed design have significant potential to provide affordable, carbon-negative, and distributed COD removal from high strength organic wastewaters if encapsulant longevity can be maintained at 5 years or above.

Anaerobic Treatment↗
DOE OSTI2024

3D Printing of Functional Hydrogel Devices for Screenings of Membrane Permeability and Selectivity

Developing a fundamental understanding of the effects of varying ligand chemistries on mass transport rates is key to designing membranes with solute-specific selectivity. While permeation cells offer a robust method to characterize membrane performance, they are limited to assessing a single membrane chemistry or salt solution per test. As a result, investigating the effects of varying ligand chemistries on membrane performance can be a tedious process, involving both the preparation of multiple samples and numerous, time-consuming permeation tests. This study uses digital light processing (DLP) 3D printing to fabricate a millifluidic flow-based permeation device made from a hydrogel active ester network that can be easily functionalized with ion-selective ligands. Without the need for bonding or assembly steps, ligands can be introduced and tested in the permeation device by simply injecting a small volume of a ligand solution. Various salt concentrations and molecular species can be cycled through a single device by switching the solution feeding into the salt reservoir, thereby reducing the number of samples needed for permeability and selectivity screenings. This research sets the groundwork for formulation development and postprocessing methods to 3D-print functional millifluidic devices capable of assessing solute selectivity in membranes and polymer adsorbents for aqueous separations. In this work, comparable salt permeability trends were observed with both 3D-printed devices and traditional assays. Devices were functionalized with an imidazole ligand to investigate salt permeability and selectivity of monovalent and divalent salts. Measurements showed increasing permeability for monovalent salts (NaCl) relative to divalent salts (MgCl 2 , CuCl 2 ) in functionalized membranes, with higher monovalent/divalent selectivity at increasing imidazole grafting densities. Here, the methods and findings described here represent a step toward developing higher-throughput methods with 3D-printed devices for screening the effects of ligand chemistry on mass transport rates in membrane materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Patterned crystal growth and heat wave generation in hydrogels

Abstract The crystallization of metastable liquid phase change materials releases stored energy as latent heat upon nucleation and may therefore provide a triggerable means of activating downstream processes that respond to changes in temperature. In this work, we describe a strategy for controlling the fast, exothermic crystallization of sodium acetate from a metastable aqueous solution into trihydrate crystals within a polyacrylamide hydrogel whose polymerization state has been patterned using photomasks. A comprehensive experimental study of crystal shapes, crystal growth front velocities and evolving thermal profiles showed that rapid growth of long needle-like crystals through unpolymerized solutions produced peak temperatures of up to 45˚C, while slower-crystallizing polymerized solutions produced polycrystalline composites and peaked at 30˚C due to lower rates of heat release relative to dissipation in these regions. This temperature difference in the propagating heat waves, which we describe using a proposed analytical model, enables the use of this strategy to selectively activate thermoresponsive processes in predefined areas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Pyrodictium abyssi AbpX reveals a calcium-responsive family of microbial biomatrix proteins that form thermostable hydrogels

Evolutionary pressure on microbial communities propagating under extreme environmental conditions often results in unique structural adaptations to promote cell survival. In this work, we report an investigation of AbpX, a biomatrix protein identified in cultures of the hyperthermophilic archaeon Pyrodictium abyssi. Under ex vivo and in vitro conditions, AbpX assembles into a paracrystalline lattice composed of semiflexible fibrils. CryoEM analysis of recombinant AbpX fibrils reveals that the precursor protein polymerizes through donor strand complementation (DSC), a process previously reported for chaperone-usher fimbriae in Gram-negative bacteria. Unlike the latter DSC protein polymers, AbpX undergoes chaperone-free polymerization in the presence of calcium ions, which are sequestered at the donor strand-acceptor groove interface between protomers in the fibril. Using a combination of cryoEM and crystallographic information, a structural model is proposed for the AbpX lattice that provides insight into its potential role in biofilm formation. These findings suggest that calcium ion coordination may contribute to fibril assembly and preorganize fibrils for incorporation into the protein lattice. Bioinformatic analysis indicates that AbpX exemplifies a distinct and broadly distributed clade of calcium ion responsive biomatrix proteins within the TasA superfamily that can be fabricated into hydrogel biomaterials in vitro under environmentally benign conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

A Molecular Description of Hydrogel Forming Polymers for Cement-Based Printing Paste Applications

This research endeavors to link the physical and chemical characteristics of select polymer hydrogels to differences in printability when used as printing aids in cement-based printing pastes. A variety of experimental probes including differential scanning calorimetry (DSC), NMR-diffusion ordered spectroscopy (DOSY), quasi-elastic neutron scattering (QENS) using neutron backscattering spectroscopy, and X-ray powder diffraction (XRD), along with molecular dynamic simulations, were used. Conjectures based on objective measures of printability and physical and chemical-molecular characteristics of the polymer gels are emerging that should help target printing aid selection and design, and mix formulation. Molecular simulations were shown to link higher hydrogen bond probability and larger radius of gyration to higher viscosity gels. Furthermore, the higher viscosity gels also produced higher elastic properties, as measured by neutron backscattering spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Characterizing Electron Flow through Catechol‐Graphene Composite Hydrogels

Abstract Electronic materials that allow the controlled flow of electrons in aqueous media are required for emerging applications that require biocompatibility, safety, and/or sustainability. Here, a composite hydrogel film composed of graphene and catechol is electrofabricated, and that this composite offers synergistic properties is reported. Graphene confers metal‐like conductivity and enables charge‐storage through an electrical double layer mechanism. Catechol confers redox‐activity and enables charge‐storage through a redox mechanism. Importantly, there are two functional populations of catechols: conducting‐catechols (presumably in intimate contact with graphene) allow direct electron‐transfer; and non‐conducting‐catechols (presumably physically separated from graphene) require diffusible mediators to enable electron‐transfer. Using a variety of spectroelectrochemical measurements, that the capacity of the composite for charge‐storage increases in proportion to the extent by which the catechol‐groups can undergo redox‐state switching is demonstrated. To illustrate the broad relevance of this work, how the redox‐state switching can be related to both the charge storage of energy materials and the memory of molecular electronic materials is discussed. The authors believe this work is significant because it demonstrates that: conducting and redox‐active components enable distinctly different mechanisms for charge‐storage and electron‐transfer; these components act synergistically; and mediators provide unique opportunities to extend the capabilities of electronic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Extrusion‐Based Printing of Nanostructured Fatty Acid Gels Incorporated in Hydrogels

Soft materials with unique nanostructures such as lamellar, hexagonal, and cubic morphologies can replicate complex structures that have potential in various fields, including biomedical and industrial applications. However, a key challenge in advancing the broader applications of 3D printing for these nanostructured soft materials is insufficient mechanical properties that hinder their printability and compromise structural stability in the final product. In this study, the suitability of a fatty acid‐based lamellar gel is evaluated for direct extrusion‐based 3D printing. Here, the lamellar gel with varying water content is integrated with a photocurable hydrogel to preserve the shape and stability of the final prints. Complex 2D and 3D design patterns are used to assess extrusion behavior, structural stability, and print precision under varying pressures. Small‐angle X‐ray Scattering (SAXS) measurements reveal the formation of lamellar nanostructures and confirm their retention after photocuring in various gels. Rheological analysis confirms that these gels exhibit key properties suitable for extrusion‐based 3D printing, such as shear‐thinning behavior. Additionally, tensile testing is conducted to evaluate the mechanical properties across cured print samples. This study underscores the potential of nanostructured gels as a robust and versatile platform, facilitating the development of materials engineered for various applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Mechanically robust hydrophobized double network hydrogels and their fundamental salt transport properties

Abstract Water swollen polymer networks are attractive for applications ranging from tissue regeneration to water purification. For water purification, charged polymers provide excellent ion separation properties. However, many ion exchange membranes (IEMs) are brittle, necessitating the use of thick support materials that ultimately decrease throughput. To this end, novel double network hydrogels (DNHs) with variable water content are prepared and characterized in terms of mechanical and ion transport properties to evaluate their potential utility as tough membrane materials. The first network contains fixed anionic charges, while the other is comprised of a copolymer with varied ratios of hydrophobic ethyl acrylate (EA) and hydrophilic dimethyl acrylamide (DMA) repeat units. Characterization of freestanding DNH films reveals a reduction in water content from 88 to 53 wt% and a simultaneous increase in ultimate stress and strain by ~3.5× and ~4.5×, respectively, for 95%/5% EA/DMA, relative to 100% DMA. Fundamental salt transport properties relevant to water purification, including permeability, solubility, and diffusivity, are measured and systematically compared with conventional membrane materials to inform the development of DNHs for membrane applications. The ability to simultaneously reduce water content and increase mechanical integrity highlights the potential of DNHs as a synthetic platform for future membrane applications.

Allen, Marshall J.↗
DOE OSTI2023

Microscale dynamics in thermoreversible hydrogels: Impact of probe size and concentration

Passive microrheology techniques using dynamic light scattering (DLS) and X-ray photon correlation spectroscopy (XPCS) have emerged as important techniques for characterizing the dynamics and viscoelastic properties of soft polymeric biomaterials. However, the impact of probe particle type, size, and concentration are important considerations in interpretation of results and comparison to properties obtained from bulk rheology measurements. In this work, we investigate a model thermoreversible polymeric hydrogel and compare results from DLS-microrheology with different size and concentrations of polystyrene probe particles and XPCS-microrheology with inorganic nanoparticles. We obtained trends that aligned most closely with the macroscopic rheology with probe particles that are slightly larger than the characteristic length scale of the gel structure, but within the same order of magnitude. By contrast, larger probe particles yielded microrheology data that are more dominated by elastic behavior than what we might expect from bulk rheology experiments, while use of small inorganic nanoparticles in XPCS-microrheology resulted in a more a more viscous response than would be expected based on the bulk rheology. Finally, this study demonstrates the utility of passive DLS- and XPCS-based microrheology in characterizing the rheological properties of complex polymeric biomaterials, while also highlighting important considerations in experimental design and choice of type, size, and concentration of probe particles used.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Dynamic Control of Photocatalytic Proton Reduction through the Mechanical Actuation of a Hydrogel Host Matrix

This paper describes a photocatalytic hydrogen evolution system that is dynamically and reversibly responsive to the pH of the surrounding solution through actuation of a micro-hydrogel (microgel) matrix that hosts the photocatalysts (CdSe/CdS nanorods). Here, the reversible actuation occurs within 0.7 s (swelling) and 1.7 s (contraction). A ΔpH of 0.01 relative to the pK a of the tertiary amine on the microgel polymer (7.27) results in a reversible change in the average diameter of the microgel hosts by a factor of 2.5 and a change in the photocatalytic turnover frequency (TOF) by a factor of five. Kinetic isotope effect and photoluminescence quenching experiments reveal that the scavenging of the photoexcited hole by sulfite ions is the rate-limiting step and leads to the observed response of the TOF to pH through actuation of the microgel. Molecular dynamics simulations quantify a greater local concentration of sulfite hole scavengers for pH < pK a .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗