Search NASA⌕ Search

SEARCH · Search NASA

Results for “IL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Fluorinated ionic liquids as gas chromatographic stationary phases for the separation of volatile per- and polyfluoroalkyl substances

Background Here, the production of fluorinated organic compounds in the manufacturing, semiconductor, and pharmaceutical industries has increased exponentially over the past decade. This rapid growth has created an urgent need for efficient chromatographic platforms capable of selectively separating these compounds from complex mixtures, not only to support industrial quality control and waste management practices, but also to enable reliable environmental monitoring of volatile fluorinated contaminants. Conventional GC stationary phases lack the fluorophilic interactions needed for highly fluorinated analytes. Consequently, there is a clear demand for specialized stationary phases designed to improve chromatographic retention and selectivity for these compounds. Results Three stationary phases composed of fluorinated ionic liquids (ILs) with varied extent of fluorination were prepared to study fluorophilic interactions with fluorinated/non-fluorinated probe molecules by gas chromatography (GC). IL stationary phases featuring linear and branched perfluoroalkyl moieties, as well as a branched alkyl moiety, were systematically investigated. Chromatographic performance was examined using fluorinated compounds and their hydrocarbon analogs, including CF 3 -substituted aromatics, aliphatic alcohols, fluorotelomer alcohols (FTOHs), and perfluoroalkenes. Measurements on 5 m and 20 m columns revealed that the IL possessing branched alkyl provided stronger dispersive and hydrogen bonding interactions toward non-fluorinated aromatic and long-chain alcohols, whereas the fluorinated ILs enhanced retention of highly fluorinated FTOHs and perfluorodecene. Comprehensive two-dimensional GC (GC × GC), using a nonpolar primary column coupled with secondary columns featuring cross-bonded poly(trifluoropropylmethyl siloxane) (Rtx-200 ms), the branched fluorinated IL, or the branched non-fluorinated IL, highlighted complementary selectivity with the branched fluorinated IL providing the strongest interactions with fluorinated analytes. Significance These results demonstrate that fluorinated IL stationary phases are promising alternatives to conventional polysiloxane stationary phases for improving the separation of per- and polyfluoroalkyl substances and related fluorinated compounds. By correlating IL structure with fluorophilic interactions, this work establishes design principles for GC stationary phases that enable enhanced selectivity for highly fluorinated analytes while maintaining complementary interactions with non-fluorinated compounds.

Comprehensive two-dimensional GC↗
DOE OSTI2026

Temperature-dependent changes in gas chromatographic separation metrics for trihexyl(tetradecyl)phosphonium-based ionic liquid stationary phases and comparison to conventional polysiloxane stationary phases

Here, to assess whether the trihexyl(tetradecyl)phosphonium chloride ([P 66614 + ][Cl - ]) ionic liquid (IL), employed as a gas chromatographic stationary phase, exhibits temperature-dependent phase transitions or structural heterogeneity, retention thermodynamics for probe molecules of varied chemical structure were investigated by gas chromatography (GC) over the temperature range of 25 to 64 °C using van’t Hoff analysis. All van’t Hoff plots for n-alkanes (C8–C12) and other probe analytes were linear, indicating the absence of detectable phase-transition behavior. The [P 66614 + ][Cl - ] IL was further compared with the [P 66614 + ] bis[(trifluoromethyl)sulfonyl]imide ([P 66614 + ][NTf 2 - ]) IL and commercial polysiloxane stationary phases in terms of temperature-dependent resolution behavior and chromatographic selectivity over the temperature range of 28–52 °C. The resolution factors of analytes in mixtures obtained using gas chromatography–mass spectrometry (GC–MS) and the summation of resolution values decreased smoothly with temperature on both IL stationary phases and on the dimethylphenylcyano-substituted polymeric stationary phase (OV-1701), whereas the poly(50% diphenyl/50% dimethyl siloxane) stationary phase (SPB-50) exhibited irregularities in its temperature-dependent summation of resolution profile, showing a distinct maximum in the temperature range of 34–40 °C. Selectivity values for the IL stationary phases were largely determined by the anion, with the [P 66614 + ][Cl - ] IL providing enhanced separation between polar and aromatic analytes, while the [P 66614 + ][NTf 2 - ] IL favored dispersive and π-π interactions that resulted in a reversal of elution order for some aliphatic–aromatic and alkyne-containing analyte pairs. Capillary columns prepared using different surface activation methods and coated with identical [P 66614 + ][Cl - ] IL stationary phase showed indistinguishable temperature-dependent trends in summation of resolution value and selectivity. An evaluation of analyte-specific selectivity provides insight into the characteristic separation behavior of the stationary phases and enables identification of analyte classes that are more efficiently separated on the [P 66614 + ]-based IL stationary phases compared to conventional stationary phase materials.

Chromatographic selectivity↗
DOE OSTI2024

Performance enhancement of aqueous ionic liquids with lower critical solution temperature (LCST) behavior through ternary mixtures

Thermally responsive ionic liquids (ILs) exhibit liquid–liquid phase separation when mixed with water and heated above a lower critical solution temperature (LCST), resulting in a water-rich (WR) and an IL-rich (ILR) phase. These binary IL–water mixtures can be employed in a variety of thermodynamic processes such as forward osmosis (FO) desalination, for which two solution properties are desirable: low phase separation temperature and high osmotic strength (osmolality). However, these two properties are interlinked, with ILs that exhibit higher osmotic strengths typically requiring higher phase separation temperatures. This behavior tends to arise from the hydrophilicity of the IL cations, which enhances osmotic strength while also elevating the phase separation temperature. In this work, we highlight a pathway to overcome this tradeoff by developing ternary IL mixtures (two ILs with varying cation hydrophilicity mixed with water), which lowers the phase separation temperature while maintaining and even enhancing the osmotic strength of the solution. We characterize the mixing behavior (osmolality, phase separation temperature, WR phase purity, and WR to ILR phase mass ratio) of four ILs as a function of their concentration in solution. We find that an enhancement of up to 81.6% in the osmolality with a concomitant reduction of up to 15.4% in the phase separation temperature can be achieved using this approach. The ternary mixture is also shown to improve the phase separation kinetics by nearly 95% compared to the binary mixture. Overall, this work highlights a new pathway to improve the performance of LCST ILs for water and energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Advances in ionic liquid recycling for lignocellulosic biomass pretreatment

Ionic liquids (ILs) are promising solvents for the pretreatment of lignocellulosic biomass due to their ability to disrupt cellulose, hemicellulose, and lignin structures. However, large-scale implementation requires the development of efficient recovery and recycling methods. This review provides a comprehensive analysis of the recyclability potential of ILs used in biomass pretreatment, emphasizing their mechanisms, recent innovations, and ongoing challenges. We begin by discussing the structural diversity and tunability of ILs, which underlie their effectiveness in biomass deconstruction. The distinct roles of IL anions and cations in dissolving specific biomass components are systematically presented and compared. Advances in IL recycling techniques, including antisolvent precipitation methods, membrane separation, and distillation, are critically examined, with attention to how mechanistic insights can inform the design of more efficient and selective recovery strategies. Despite progress, significant challenges remain to scaling up IL-based biomass processing, including high cost, environmental concerns, and impact of biomass-derived impurities (e.g., lignin residues, sugars, proteins) on IL purity and functionality after reuse. We also review the applicability of different ILs based on life cycle assessments and techno-economic analyses. Lastly, we identify critical research gaps and propose future directions, including the design and development of next-generation ILs with improved recyclability, reduced toxicity, and enhanced economic viability for industrial-scale applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Minimal implicit-solvent coarse-grained simulation of Pluronic block copolymers with ionic liquids

Pluronic block copolymers, composed of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) in a triblock structure (PEO–PPO–PEO), are well known for their amphiphilic character and ability to self‐assemble into micelles in aqueous solution. The addition of ionic liquids (ILs) can further modulate the core–shell structures of these copolymers, influencing their stability, critical micellization temperature, and size. However, fully atomistic simulations often become prohibitively expensive due to the size and complexity of these systems. In this work, coarse‐grained simulations using a minimal implicit‐solvent model were performed to examine how two classes of ILs, namely, 1‐alkyl‐3‐methylimidazolium ([C n C 1 im]) and 1‐alkyl‐3‐methylpyrrolidinium ([C n C 1 pyrr]), change the micellization of Pluronic block copolymers in aqueous solution. The effects of IL concentration and alkyl group length were investigated, and the model greatly improved the efficiency of simulating large‐scale micelle systems. Furthermore, the numerical simulations are qualitatively compared with experimental investigations. Our results show that adding ILs expands the micelle core by embedding IL tails among the PPO blocks, thereby increasing overall micelle size. Less polar ILs generally induce more pronounced micellar growth. However, the effect of IL tail length on conformation and micellar packing is non‐monotonic. Up to moderate chain lengths (around C8–C10), the IL tails can extend sufficiently to increase local separation within the micelle; at longer tail lengths, enhanced hydrophobic clustering and steric hindrance cause the tails to bend or fold, capping further expansion. In addition, although block copolymer chains tend to pack more closely in the presence of longer‐tailed ILs, the random coil size of an individual polymer chain does not necessarily shrink. Meanwhile, these insights provide a deeper understanding of how Pluronic/IL systems interact, informing applications in drug delivery, cosmetics, food, and environmental engineering. Finally, our minimal implicit‐solvent model can be applied to larger systems and longer timescales, substantially reducing computational cost while reproducing key structural trends observed experimentally.

Atomistic simulations↗
NASA NTRS1993

Mitogenic signal transduction in T lymphocytes in microgravity

The activation by concanavalin A Con A of human peripheral blood lymphocytes (PBLs) in the presence of monocytes as accessory cells was investigated in cultures exposed to microgravity conditions in Spacelab. Activation of T cells was measured as incorporation of [3H]thymidine into DNA, secretion of interleukin-2 (IL-2), and interferon-gamma, and expression of IL-2 receptors. Whereas, as discovered in earlier experiments, the activation of resuspended T cells is strongly inhibited, activation of cells attached to microcarrier beads is more than doubled in microgravity. The results suggest that the depression of the activation in resuspended cells may be attributed to a malfunction of monocytes acting as accessory cells. In fact, although the ultrastructure of resuspended monocytes is not altered in microgravity, the secretion of IL-1 is strongly inhibited. Our data suggest that (1) IL-2 is produced independently of IL-1, (2) IL-1 production is triggered only when monocytes (and lymphocytes?) adhere to microcarriers, (3) the expression of IL-2 receptors depends on IL-1, and (4) provided sufficient IL-1 is available, activation is enhanced in microgravity. Finally, cultures of resuspended PBLs and monocytes in microgravity constitute a complete and natural system in which monocytes are not operational. This may be useful for studies of the role of accessory cells and cell-cell interactions in T lymphocyte activation.

STS-40 Shuttle Project↗
NASA NTRS2008

Plasma Cytokine Levels in Astronauts Before and after Spaceflight

Space flight is a unique experience and results in adverse effects on human physiology. Changes have been reported in various physiological systems, including musculoskeletal, neurovestibular, cardiovascular, endocrine, immunity and increased latent viral reactivation as well as others. The potential mechanisms behind these changes are not fully understood. Various cytokines such as IL-1, IL-6, TNF and chemokines have been linked to several of these changes, like muscle loss, bone loss, fatigue, sleep deprivation and viral reactivation. Eighteen astronauts (15 M and 3 F) from 8 spaceflights and 10 healthy age-matched adults (6 M, 4 F) were included in the present study. A panel of 21 plasma cytokines was analyzed with the Luminex 100 to measure the cytokines in these subjects 10 days before the flight (L-10), 2-3 hour after landing (R+0), 3 days after landing (R+3), and at their annual medical exam (AME). IL-10, IL-1, IFN-alpha, MCP-1 and IP-10 increased significantly at L-10 as compared with AME levels. IL-6 and IFN-alpha showed significant increases at R + 0 (P less than .05) over their baseline levels (AME). Cytokine levels at R+3 were not significantly different from R+0. IL-10 and IL-6 have been reported to increase in during viral reactivation. These data show that there was a shift from TH1 to TH2 cytokines L-10 and R+0. We also studied viral reactivation in 10 of the 18 subjects included in the present study before, during, and after space flight. Increased salivary varicella zoster virus (VZV) shedding in these subjects was found either during or after the mission. VZV shedding correlated with the increased levels of cytokines especially IL-10 and IL-6. Overall, our data suggests that cytokines may play an important role in regulating adverse changes in astronauts, and further studies are needed to fully understand the mechanism.

Mehta, Satish K.↗
NASA NTRS2009

Oxygen Production from Lunar Regolith using Ionic Liquids

The objective of this work and future follow-on work is to develop a safe, efficient, and recyclable method for oxygen and/or metals extraction from lunar regolith, in support of establishing a manned lunar outpost. The approach is to solubilize the oxides that comprise lunar regolith in media consisting of ionic liquids (ILs) and/or their mixtures at temperatures at or below 300 C. Once in solution, electrolysis can either be performed in-situ to generate oxygen at the anode and hydrogen and/or metals (silicon, iron, aluminum, titanium, etc.) at the cathode. Alternatively, the water that is generated during the solubilization process can be distilled out and condensed into a separate IL and then electrolysized to produce hydrogen and oxygen. In the case of lunar regolith, this method could theoretically produce 44g oxygen per 100g of regolith. The oxygen can be used for human life support and/or as an oxidizer for rocket fuels, and the metals can be used as raw materials for construction and/or device fabrication. Moreover, the hydrogen produced can be used to re-generate the acidic medium, which can then be used to process additional regolith, thereby making the materials recyclable and limiting upmass requirements. An important advantage of IL acid systems is that they are much "greener" and safer than conventional materials used for regolith processing such as sulfuric or hydrochloric acids. They have very low vapor pressures, which means that they contain virtually no toxic and/or flammable volatile content, they are relatively non-corrosive, and they can exhibit good stability in harsh environments (extreme temperatures, hard vacuum, etc.). Furthermore, regolith processing can be achieved at lower temperatures than other processes such as molten oxide electrolysis or hydrogen reduction, thereby reducing initial power requirements. Six ILs have been synthesized and tested for their capability to dissolve lunar simulant, and for electrochemical and thermal stability. The results showed that ILs can be very efficient electrolytes; in particular IL/phosphoric-acid mixtures appear extremely promising for solubilizing lunar simulant. Results from preliminary experiments for distillation of water produced from the oxygen within the metal oxides of the simulant and the hydrogen from the acid indicates that over 75% of the oxygen from the simulant can be harvested as water at a temperature of 150 C. A method for collection of oxygen from electrolysis of the water derived from solubilizing simulant was developed by using a liquid nitrogen trap to liquefy and collect the oxygen. Although precise quantification of the liquid oxygen trapped is difficult to obtain, the amount of hydrogen and oxygen collected from electrolysis of water in this system was greater than 98%. This set-up also included a portable mass spectrometer for the identification of gases released from electrolysis cells. Regeneration of ILs through re-protonation was also demonstrated. Four sequential re-generations of an IL following solubilization of simulant showed no significant differences in amounts of simulant dissolved. Follow-on work for this project should include more studies of IL/phosphoric acid systems. Also, much more work is necessary for defining methods for electrolysis and purification of metals from regolith solubilized in ILs, and for developing a system to use the produced hydrogen to regenerate the spent IL. Finally, design and development of flight breadboard and prototype hardware is required.

Paley, Mark Steven↗
NASA NTRS2011

Ionic Liquids to Replace Hydrazine

A method for developing safe, easy-to-handle propellants has been developed based upon ionic liquids (ILs) or their eutectic mixtures. An IL is a binary combination of a typically organic cation and anion, which generally produces an ionic salt with a melting point below 100 deg C. Many ILs have melting points near, or even below, room temperature (room temperature ionic liquids, RTILs). More importantly, a number of ILs have a positive enthalpy of formation. This means the thermal energy released during decomposition reactions makes energetic ILs ideal for use as propellants. In this specific work, to date, a baseline set of energetic ILs has been identified, synthesized, and characterized. Many of the ILs in this set have excellent performance potential in their own right. In all, ten ILs were characterized for their enthalpy of formation, density, melting point, glass transition point (if applicable), and decomposition temperature. Enthalpy of formation was measured using a microcalorimeter designed specifically to test milligram amounts of energetic materials. Of the ten ILs characterized, five offer higher Isp performance than hydrazine, ranging between 10 and 113 seconds higher than the state-of-the-art propellant. To achieve this level of performance, the energetic cations 4- amino-l,2,4-triazolium and 3-amino-1,2,4-triazolium were paired with various anions in the nitrate, dicyanamide, chloride, and 3-nitro-l,2,4-triazole families. Protonation, alkylation, and butylation synthesis routes were used for creation of the different salts.

Koelfgen, Syri↗
DOE OSTI2026

Influence of solvents on electrochemical stability window of ionic liquid solutions

The electrochemical stability window (ESW) defines the voltage range within which an electrolyte remains stable against oxidation and reduction, serving as a key descriptor for ionic liquid (IL)-based systems. The ESWs of 15 ILs with diverse cation-anion combinations were systematically investigated, both in their neat forms and as binary mixtures with three representative solvents, i.e., propylene carbonate (PC), ethylene glycol (EG), and tetrahydrofuran (THF). Cyclic voltammetry on a glassy carbon electrode determined anodic and cathodic stability limits, revealing that ESW protection in IL-solvent mixtures strongly depends on solvent polarity, proticity, and IL compatibility. PC, with a high dielectric constant and aprotic character, broadened anodic limits and moderately stabilized cathodic limits. THF maintained compact interfacial structure, offering additional cathodic protection, whereas EG, being protic, reduced ESWs via proton-coupled electron transfer and hydrogen evolution. The solvent protection trend followed by PC > THF > EG, with bulky, hydrophobic cations ([HMIM] + , [BMPYRR] + ) and weakly coordinating anions ([NTF 2 ] - , [DCA] - , [DEP] - ) showing the highest ESW protection for 50 mol% IL in these solvents. Among the neat ILs, [EMIM][DEP], [HMIM][PF 6 ], and [BMPYRR][DCA] showed wide ESWs of ∼5.5 V. These results provide valuable insight into solvent-modulated electrochemical stability, enabling rational design of IL-based electrolytes for energy storage and electrosynthesis.

25 ENERGY STORAGE↗
DOE OSTI2021

Chapter 3: New Developments on Ionic Liquid-Tolerant Microorganisms Leading Toward a More Sustainable Biorefinery

The growing concerns about climate change and energy security are driving the development of bio-based technologies to produce renewable liquid fuels and chemicals. Ionic liquids (ILs) have demonstrated to be promising solvents to pretreat lignocellulosic residues, promoting efficient enzymatic hydrolysis of lignocellulosic carbohydrates into sugars, which can be further used by microorganisms to produce biofuels and other value-added chemicals. Despite their unique properties to effectively deconstruct plant cell walls, ILs show strong interactions with the pretreated biomass, and their presence is often inhibitory to cellulolytic enzymes and microorganisms. The most advanced biorefinery concepts based on IL pretreatments focus on the development of more biocompatible ILs and more robust microbial strains with higher tolerance to ILs. This chapter provides an overview and a discussion over the main efforts performed on the screening and development of IL-tolerant microbial strains, as well as in more biocompatible IL pretreatment methods. These early research advancements in this field offer a baseline and a platform for future research with the goal of improving the sustainability and economic viability of IL pretreatment-based biorefineries.

bioconversion↗
DOE OSTI2026

Quantification of [MTBD][beti] loading and its effects on Pt/HSC electrode performance in hydrogen fuel cells

High surface area carbon-supported platinum catalysts (Pt/HSC) are widely used in polymer electrolyte membrane fuel cells but often suffer from limited proton and oxygen transport within porous domains. To address these challenges, we integrate the ionic liquid [MTBD][beti] into Pt/HSC catalyst layers using two deposition methods-one-pot and sequential deposition-to tune IL distribution within micropores and mesopores. A combination of ex situ and in operando techniques were employed to elucidate electrode structure-performance relationships across a range of IL loadings. Sequential deposition achieved more efficient pore filling and higher IL retention at lower IL:C ratios, enabling enhanced proton conductivity and protection of active sites. Compared to the IL-free Pt/HSC, IL-modified electrodes demonstrated up to 28% improvement in mass activity and enhanced high-current-density performance under low relative humidity, while maintaining comparable performance under humidified conditions. Electrochemical impedance spectroscopy and CO displacement experiments reveal that improvements are linked to reduced ionic resistance and lower sulfonate adsorption on Pt sites, rather than changes in electrochemical surface area. However, excessive IL loading leads to mass transport losses. These results highlight the importance of selective pore filling and efficient IL distribution in achieving kinetic gains without compromising ionic and gas transport.

08 HYDROGEN↗
DOE OSTI2021

Modeling dissociation of ionic liquids with electrolyte NRTL model

Dissociation of ionic liquids (ILs) is critical to electrochemical process performance by affecting ionic conductivity. Prior studies of thermodynamic modeling either assumed no dissociation or complete dissociation that were not consistent with experimental observations. This work presented an eNRTL model for three aqueous imidazolium-based IL systems: [Emim][EtSO 4 ], [Emim][TFA], and [Emim][TfO]. The model accurately correlates the IL dissociation and VLE data in the entire concentration range from pure IL to infinite dilution aqueous solution. The system non-ideality is dominated by the dissociation chemistry. Dissociation behavior is driven by strong short-range interaction of the molecular IL-water pair relative to the dissociated IL-water pair, consistent with prior studies indicating that molecular IL and water can form an energetically favorable complex. The interaction energy parameters calculated in this work qualitatively agrees with the hydrogen bonding ability of the anions previously reported. This research not only provides a model that well describes the IL dissociation but also demonstrates the physical significance of eNRTL model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Electrochemical dynamics of imidazolium ionic liquids at graphene electrodes for energy storage applications

Electric double layer capacitors (EDLCs) are prominent energy storage systems that constitute the foundation of more reliable and sustainable energy infrastructures. Modern EDLCs often incorporate ionic liquids (ILs) as a key component in their electrolytes, leveraging the high electrochemical stability of ILs to enhance device performance. The performance and functionality of these capacitors also hinge on the interfacial behavior of ILs at electrode surfaces, which remain insufficiently understood. Here, we performed synchrotron infrared nanospectroscopy (SINS) in combination with density functional theory (DFT) calculations to investigate the electric double layers (EDLs) of three imidazolium-based ILs in a custom-designed graphene liquid cell. This approach revealed new insights into the dynamics of IL EDLs and the underpinning factors originating from the IL structures. Variations in anion size and structure were found to tune the ILs’ ability to form EDLs with compact and closely-correlated ion arrangements, which are critical for enhancing their capacitive performance. These findings highlight the intricate interactions between ions governed by their structures and charge behaviors, which underscores the opportunities for targeted design of IL-based electrolytes to optimize EDLC functionality.

Electric double layers↗
DOE OSTI2020

Structure and Stability of the Ionic Liquid Clusters [EMIM]n[BF4]n+1- (n = 1 – 9): Implications for Electrochemical Separations

Precise functionalization of electrodes with size-selected ionic liquid (IL) clusters may improve the application of ILs in electrochemical separations. Herein, we report our combined experimental and theoretical investigation of the IL clusters [EMIM]????[BF4]????+1- (n = 1 – 9) and demonstrate their selectivity and efficiency towards targeted adsorption of molecules from solution. The structures and energies of the IL clusters, predicted with global optimization, agree with and help interpret the ion abundances and stabilities measured by high mass resolution electrospray ionization mass spectrometry and collision induced dissociation experiments. The [EMIM][BF4]2- cluster, which was identified as the most stable IL cluster, was selectively soft landed onto a working electrode. Electrochemical impedance spectroscopy revealed a lower charge transfer resistance on the soft-landed electrode containing [EMIM] [BF_4 ]_2^- compared to an electrode prepared by drop casting of IL solution, which contains the full range of IL clusters. Our findings indicate that specific IL clusters may be used to increase the efficiency of electrochemical separations by lowering the overpotentials involved.

Zhang, Jun↗
DOE OSTI2020

Competitive Adsorption of Lubricant Base Oil and Ionic Liquid Additives at Air/Liquid and Solid/Liquid Interfaces

Oil-soluble ionic liquids (ILs) have been proved as effective additives in lubricant oils through tribological experiments and post-test analytical analyses. Here, surface structures of lubricant base oil, oil-soluble ILs, and their mixtures at the air/liquid and solid/liquid interfaces have been studied using sum frequency generation (SFG) vibrational spectroscopy. At the air/base oil and air/IL interfaces, the alkyl chains of the studied compounds were shown to be conformationally disordered and their terminal methyl groups point outward at the liquid surface. The base oil dominates the air/(base oil + IL) interface due to its higher surface excess propensity and larger bulk concentration. At the solid (silica) surface, ILs adopt a structure with their charged headgroups in contact with the silica surface, while their alkyl chains are more conformationally ordered or packed compared to the air/IL interface. At the interface between silica and (base oil + IL) mixtures, ILs also preferentially adsorb to the silica surface with their layer structures somewhat different from those of ILs alone. These results showed that ILs can adsorb onto the solid surface even before tribological contacts are made. The insights obtained from this SFG study provide a better understanding of the role of ionic liquids in lubrication.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ion Transport and Mechanical Properties of Non-Crystallizable Molecular Ionic Composite Electrolytes

Polymer electrolytes show promise as alternatives to conventional electrolytes in energy storage and conversion devices but have been limited due to their inverse correlation between ionic conductivity and modulus. In this study, we examine surface morphology, linear viscoelastic, dielectric and diffusive properties of molecular ionic composites (MICs), materials produced through the combination of a rigid and charged double helical polymer, known as poly(2,2’)-disulfonyl-4,4’benzidine terepthalamide (PBDT), with ionic liquids (ILs). To probe temperature extremes, we incorporate a non-crystallizable IL to allow measurements from to -90 to 200°C. As we increase PBDT weight percentage (wt%), shear moduli increase and do not decay up to 200°C while maintaining room temperature ionic conductivity within a factor of two of the neat IL. We connect diffusion coefficients of IL ions with ionic conductivity through the Haven ratio across a wide temperature range and analyze trends in ion transport based on a relatively high and composition-dependent static dielectric constant. This behavior may result from collective rearrangement of IL ions in these networks. We propose that these properties are driven by a two-phase system in MICs corresponding to IL-rich “puddles” and PBDT-IL associated “bundles” where IL ions form alternating sheaths of cations and anions around each PBDT rod. Furthermore, these polymer-based MIC electrolytes show great promise for use in electrochemical devices that require fast ion transport, high modulus, and a broad thermal window.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Influence of counterion substitution on the properties of imidazolium-based ionic liquid clusters

Due to their unique physiochemical properties that may be tailored for specific purposes, ionic liquids (ILs) have been investigated for various applications, including chemical separations, catalysis, energy storage, and space propulsion. The different cations and anions comprising ILs may be selected to optimize a range of desired properties, such as thermal stability, ionic conductivity, and volatility, leading to the designation of certain ILs as designer “green” solvents. The effect of counterions on the properties of ILs is of both fundamental scientific interest and technological importance. Herein, we report a systematic experimental and theoretical investigation of the size, charge, stability toward dissociation, and geometric/electronic structure of 1-ethyl-3-methyl imidazolium (EMIM)-based IL clusters containing two different atomic counterions (i.e., bromide [Br − ] and iodide [I − ]). This work extends our studies of EMIM + cations with atomic chloride (Cl − ) and molecular tetrafluoroborate (BF 4 − ) anions reported previously by Baxter et al. [Chem. Mater. 34, 2612 (2022)] and Zhang et al . [J. Phys. Chem. Lett. 11, 6844 (2020)], respectively. Distributions of anionic IL clusters were generated in the gas phase using electrospray ionization and characterized by high mass resolution mass spectrometry, energy-resolved collision-induced dissociation, and negative ion photoelectron spectroscopy experiments. The experimental results reveal anion-dependent trends in the size distribution, relative abundance, ionic charge state, stability toward dissociation, and electron binding energies of the IL clusters. Complementary global optimization theory provides molecular-level insights into the bonding and electronic structure of a selected subset of clusters, including their low energy structures and electrostatic potential maps, and how these fundamental characteristics are influenced by anion substitution. Collectively, our findings demonstrate how the fundamental properties of ILs, which determine their suitability for many applications, may be tuned by substituting counterions. These observations are critical in the sub-nanometer cluster size regime where phenomena do not scale predictably to the bulk phase, and each atom counts toward determining behavior.

cluster↗