Search NASA⌕ Search

SEARCH · Search NASA

Results for “INERTIAL SPACE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The Shuttle inertial system

The Space Shuttle inertial system is built around a sensor assembly called the inertial measurement unit (IMU). The system includes a redundant set of three structurally integrated IMU's that operate in conjunction with parallel strung data system computers to provide precise attitude and velocity information to user system functions. The inertial system is actually a separate subsystem function integrated into the overall avionics system. Software resident in the system computers is the final link in the inertial system. The inertial software is comprised of two major sets, including a subsystem operating program (SOP) called the IMU SOP and redundancy management. Attention is given to system applications, systems performance, attitude sensitivities, the IMU platform, IMU thermal management, aspects of IMU calibration, and Shuttle program experience.

Swingle, W. L.↗
NASA NTRS1973

Failure management of multiple gimbal inertial systems for space shuttle

A failure detection and isolation technique for use with four gimbaled inertial measurement units (IMU) is presented. By using simulated boost and entry shuttle trajectories with specific gimbaled IMU models, failure detection thresholds are developed based on red-line life dependent requirements and warning thresholds within the red-line thresholds based on expected worst case IMU performance. Using these trajectories, established trajectory threshold, and multiple IMU models, various failure detection and isolation techniques are evaluated for application in both powered and unpowered flight phases. The adequacy of the systems for both attitude and velocity detection methods is evaluated and recommendations for space shuttle applications are made.

Dove, D. W.↗
NASA NTRS2000

Flight Results of the Chandra X-ray Observatory Inertial Upper Stage Space Mission

Under contract to NASA, a specially configured version of the Boeing developed Inertial Upper Stage (IUS) booster was provided by Boeing to deliver NASA's 1.5 billion dollar Chandra X-Ray Observatory satellite into a highly elliptical transfer orbit from a Shuttle provided circular park orbit. Subsequently, the final orbit of the Chandra satellite was to be achieved using the Chandra Integral Propulsion System (IPS) through a series of IPS burns. On 23 July 1999 the Shuttle Columbia (STS-93) was launched with the IUS/Chandra stack in the Shuttle payload bay. Unfortunately, the Shuttle Orbiter was unexpectantly inserted into an off-nominal park orbit due to a Shuttle propulsion anomaly occurring during ascent. Following the IUS/Chandra on-orbit deployment from the Shuttle, at seven hours from liftoff, the flight proven IUS GN&C system successfully injected Chandra into the targeted transfer orbit, in spite of the off-nominal park orbit. This paper describes the IUS GN&C system, discusses the specific IUS GN&C mission data load development, analyses and testing for the Chandra mission, and concludes with a summary of flight results for the IUS part of the Chandra mission.

Tillotson, R.↗
NASA NTRS1973

Failure detection and isolation of redundant inertial systems for Space Shuttle

A failure detection and isolation technique is presented for application to 'off-the-shelf' type four-gimbaled inertial measurement units (IMUs) such as the KT-70 or Carousel IV. This study concentrates initially upon actual four-gimbaled IMU performance requirements for current Space Shuttle booster and orbiter mission phases. When this information is obtained for a simplex system, the remaining area of study necessary to attain redundant IMU capabilities is the establishment of mission-dependent performance failure detection thresholds. These thresholds, then, permit a careful evaluation of the capabilities of various 'off-the-shelf' four gimbaled IMUs to satisfy the Shuttle mission performance requirements with various failure detection and isolation methods.

Brown, H. E.↗
NASA NTRS1972

Redundancy management of multiple inertial systems for Space Shuttle.

Failure detection and isolation techniques are developed for application to off-the-shelf type four-gimbaled inertial measurement units such as the KT-70 or Carousel IV. By using simulated boost and entry shuttle trajectories with specific gimbaled IMU models, failure detection thresholds are developed based upon red-line life dependent requirements and warning thresholds are given within the red-line thresholds based upon expected worst case IMU performance. Using these trajectories, established trajectory thresholds, and multiple IMU models, various failure detection and isolation techniques are evaluated for application in both powered and unpowered flight phases. The adequacy of off-the-shelf systems for both attitude and velocity detection methods is evaluated and recommendations for shuttle application are made.

Dove, D. W.↗
NASA NTRS1999

Inertial-Electrostatic Confinement (IEC) Fusion For Space Propulsion

An Inertial-Electrostatic Confinement (IEC) device was assembled at the Marshall Space Flight Center (MSFC) Propulsion Research Center (PRC) to study the possibility of using IEC technology for deep space propulsion and power. Inertial-Electrostatic Confinement is capable of containing a nuclear fusion plasma in a series of virtual potential wells. These wells would substantially increase plasma confinement, possibly leading towards a high-gain, breakthrough fusion device. A one-foot in diameter IEC vessel was borrowed from the Fusion Studies Laboratory at the University of Illinois @ Urbana-Champaign for the summer. This device was used in initial parameterization studies in order to design a larger, actively cooled device for permanent use at the PRC.

Nadler, Jon↗
NASA NTRS1999

Inertial-Electrostatic Confinement (IEC) Fusion for Space Propulsion

An Inertial-Electrostatic Confinement (IEC) device was assembled at the Marshall Space Flight Center (MSFC) Propulsion Research Center (PRC) to study the possibility of using EEC technology for deep space propulsion and power. Inertial-Electrostatic Confinement is capable of containing a nuclear fusion plasma in a series of virtual potential wells. These wells would substantially increase plasma confinement, possibly leading towards a high-gain, breakthrough fusion device. A one-foot in diameter IEC vessel was borrowed from the Fusion Studies Laboratory at the University of Illinois@Urbana-Champaign for the summer. This device was used in initial parameterization studies in order to design a larger, actively cooled device for permanent use at the PRC.

Nadler, Jon↗
NASA NTRS1992

Laboratory demonstrations of superconducting gravity and inertial sensors for space and airborne gravity measurements

The paper describes the superconducting gravity gradiometers (SGGs) and superconducting accelerometers being developed at the University of Maryland, which take advantage of many exotic properties of superconductivity to obtain the required low noise, high stability, and large dynamic range. Results of laboratory demonstrations of some of these instruments are presented together with the design and operating principles. Particular attention is given to the three-axis Model II SGG and a six-axis superconducting accelerometer model (Model I SSA). Model II SGG, after a residual common-mode balance, exhibited a noise level of 0.05/sq rt Hz above 0.1 Hz and a 1/f-squared noise below 0.1 Hz. All six channels of Model I SSA operated simultaneously with linear and angular acceleration noise levels of 3 x 10 exp -10 g(E)/sq rt Hz and 5 x 10 exp -8 rad/sec per sec per sq rt Hz, respectively.

Paik, Ho J.↗
NASA NTRS1999

Disruption of postural readaptation by inertial stimuli following space flight

Postural instability (relative to pre-flight) has been observed in all shuttle astronauts studied upon return from orbital missions. Postural stability was more closely examined in four shuttle astronaut subjects before and after an 8 day orbital mission. Results of the pre- and post-flight postural stability studies were compared with a larger (n = 34) study of astronauts returning from shuttle missions of similar duration. Results from both studies indicated that inadequate vestibular feedback was the most significant sensory deficit contributing to the postural instability observed post flight. For two of the four IML-1 astronauts, post-flight postural instability and rate of recovery toward their earth-normal performance matched the performance of the larger sample. However, post-flight postural control in one returning astronaut was substantially below mean performance. This individual, who was within normal limits with respect to postural control before the mission, indicated that recovery to pre-flight postural stability was also interrupted by a post-flight pitch plane rotation test. A similar, though less extreme departure from the mean recovery trajectory was present in another astronaut following the same post-flight rotation test. The pitch plane rotation stimuli included otolith stimuli in the form of both transient tangential and constant centripetal linear acceleration components. We inferred from these findings that adaptation on orbit and re-adaptation on earth involved a change in sensorimotor integration of vestibular signals most likely from the otolith organs.

NASA Center JSC↗
NASA NTRS1981

The Inertial Upper Stage - A space transportation system element nearing first flight

The Inertial Upper Stage (IUS) developed by the USAF and NASA is a highly reliable, cost-effective solid propellant upper stage, with inherent flexibility and adaptability for integration with the Space Shuttle. The propulsion system is simple, utilizing safe, solid rocket motors with extremely light-weight nonmetallic cases and nozzles. The IUS can deliver 2268 kg from the Shuttle to geosynchronous altitude; it consists of a 9700 kg propellant weight first stage, an interstage structure, a 2720 kg propellant weight second stage, and an equipment support section. The avionics system includes the electronic and electrical hardware used to perform all signal conditioning, data processing, and software formatting associated with navigation, guidance, control, data management, and redundancy management. The generic thermal design of the IUS is suited to a wide range of thermal environments; the software design provides for selectable thermal maneuvers (rotisserie, reciprocating, toasting, space facing, sun facing) to satisfy different payload thermal requirements. A 1982 launch with the Titan 34D and a 1983 launch with the Shuttle Orbiter are planned.

Rohrbaugh, D. J.↗
NASA NTRS1993

Dust-acoustic double layers - Ion inertial effects

Space and astrophysical plasmas often comprise a number of massive ion components in addition to a tenuous, negatively charged dust component and an electron component. Stationary electrostatic double layers in a dusty plasma are investigated in a model treating the ion components as Boltzmann-distributed (inertialess) fluids. On comparison with the inertialess theory, one finds considerably reduced double layer existence parameter regimes. Significantly, highly nonlinear double layers are ruled out when ion inertia is incorporated. However, in the restricted parameter regimes in which the inertial theory predicts double layers for small ion/dust mass ratios (about 10 exp -15-10 exp -8) there is good qualitative agreement with inertialess theory. The reasons for these, and other discrepancies and similarities, are discussed.

Mace, Richard L.↗
NASA NTRS1980

A study of the applicability/compatibility of inertial energy storage systems to future space missions

The applicability/compatibility of inertial energy storage systems like the homopolar generator (HPG) and the compensated pulsed alternator (CPA) to future space missions is explored. Areas of CPA and HPG design requiring development for space applications are identified. The manner in which acceptance parameters of the CPA and HPG scale with operating parameters of the machines are explored and the types of electrical loads which are compatible with the CPA and HPG are examined. Potential applications including the magnetoplasmadynamic (MPD) thruster, pulsed data transmission, laser ranging, welding and electromagnetic space launch are discussed.

Weldon, W. F.↗
NASA NTRS1981

Space Transportation System Cargo projects: inertial stage/spacecraft integration plan. Volume 1: Management plan

The Kennedy Space Center (KSC) Management System for the Inertial Upper Stage (IUS) - spacecraft processing from KSC arrival through launch is described. The roles and responsibilities of the agencies and test team organizations involved in IUS-S/C processing at KSC for non-Department of Defense missions are described. Working relationships are defined with respect to documentation preparation, coordination and approval, schedule development and maintenance, test conduct and control, configuration management, quality control and safety. The policy regarding the use of spacecraft contractor test procedures, IUS contractor detailed operating procedures and KSC operations and maintenance instructions is defined. Review and approval requirements for each documentation system are described.

Source record↗
NASA NTRS1993

Evaluation of inertial devices for the control of large, flexible, space-based telerobotic arms

Inertial devices, including sensors and actuators, offer the potential of improving the tracking of telerobotic commands for space-based robots by smoothing payload motions and suppressing vibrations. In this paper, inertial actuators (specifically, torque-wheels and reaction-masses) are studied for that potential application. Batch simulation studies are presented which show that torque-wheels can reduce the overshoot in abrupt stop commands by 82 percent for a two-link arm. For man-in-the-loop evaluation, a real-time simulator has been developed which samples a hand-controller, solves the nonlinear equations of motion, and graphically displays the resulting motion on a computer workstation. Currently, two manipulator models, a two-link, rigid arm and a single-link, flexible arm, have been studied. Results are presented which show that, for a single-link arm, a reaction-mass/torque-wheel combination at the payload end can yield a settling time of 3 s for disturbances in the first flexible mode as opposed to 10 s using only a hub motor. A hardware apparatus, which consists of a single-link, highly flexible arm with a hub motor and a torque-wheel, has been assembled to evaluate the concept and is described herein.

Montgomery, Raymond C.↗