Search NASA⌕ Search

SEARCH · Search NASA

Results for “INFRARED SPECTROSCOPY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Polyvinyl acetate-based polymer host for optical and far-infrared spectroscopy of individualized nanoparticles

Preparation techniques for producing films of individualized solution-dispersed nanoparticles (NPs) for optical spectroscopy are frequently technically challenging and tailored for a specific NP system. In this work, we present a rapid, easy, and economical technique for producing polyvinyl acetate (PVAc)-based NP-polymer films on the order of 100’s of micrometers thick that exhibit high uniformity, low aggregation, excellent optical transparency, and low terahertz absorption. In addition, we find that these films are robust at cryogenic temperatures and have a high laser damage threshold of 0.3 TW cm –2 , which make them suitable for pulsed laser measurements. We show that free-standing, flexible, PVAc films can incorporate both one-dimensional single-wall carbon nanotubes (SWCNTs) and zero-dimensional Au NPs. Using absorbance, Raman scattering, and photoluminescence excitation spectroscopy, we observe that SWCNT individualization is maintained, and minimized polymer strain imposed, when the nanotubes are transitioned from the solution to the polymer host. This PVAc-based polymer host presents researchers with a straightforward method for producing free-standing and flexible NP films with low aggregation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Infrared spectroscopy of the syn -methyl-substituted Criegee intermediate: A combined experimental and theoretical study

An IR–vacuum ultraviolet (VUV) ion-dip spectroscopy method is utilized to examine the IR spectrum of acetaldehyde oxide (CH3CHOO) in the overtone CH stretch (2νCH) spectral region. IR activation creates a depletion of the ground state population that reduces the VUV photoionization signal on the parent mass channel. IR activation of the more stable and populated syn-CH3CHOO conformer results in rapid unimolecular decay to OH + vinoxy products and makes the most significant contribution to the observed spectrum. The resultant IR–VUV ion-dip spectrum of CH3CHOO is similar to that obtained previously for syn-CH3CHOO using IR action spectroscopy with UV laser-induced fluorescence detection of OH products. The prominent IR features at 5984 and 6081 cm−1 are also observed using UV + VUV photoionization of OH products. Complementary theoretical calculations utilizing a general implementation of second-order vibrational perturbation theory provide new insights on the vibrational transitions that give rise to the experimental spectrum in the overtone CH stretch region. The introduction of physically motivated small shifts of the harmonic frequencies yields remarkably improved agreement between experiment and theory in the overtone CH stretch region. The prominent features are assigned as highly mixed states with contributions from two quanta of CH stretch and/or a combination of CH stretch with an overtone in mode 4. The generality of this approach is demonstrated by applying it to three different levels of electronic structure theory/basis sets, all of which provide spectra that are virtually indistinguishable despite showing large deviations prior to introducing the shifts to the harmonic frequencies.

Chemistry↗
DOE OSTI2026

Self-supervised and multi-fidelity learning for extended predictive soil spectroscopy

Infrared spectroscopy is a cost-effective, non-destructive, and environmentally benign technology that is increasingly recognized as an important solution for meeting the global demand for soil data. While both near-infrared (NIR) and mid-infrared (MIR) diffuse reflectance spectroscopy enable rapid estimation of soil properties, they present a significant trade-off: NIR offers superior scalability and lower operational costs, whereas MIR provides higher analytical fidelity by capturing fundamental molecular vibrations. In this study, we propose a self-supervised, multi-fidelity learning framework designed to bridge this gap. Our approach leverages large-scale MIR spectral libraries to learn a compact, transferable latent representation, into which NIR spectra are subsequently aligned for downstream prediction. The workflow consists of pretraining a latent model on a large MIR library, adapting the representation using a smaller paired NIR–MIR dataset, and evaluating generalization on an independent external test set. Across a range of chemical and physical soil properties, we found that MIR-derived embeddings improved prediction accuracy relative to baseline models that used raw MIR inputs. Predictions derived from the spectrum conversion (NIR to MIR) task did not match the performance of the original MIR spectra but were similar or superior to predictive performance of NIR-only models, suggesting the unified spectral latent space can effectively leverage the larger and more diverse MIR dataset for prediction of soil properties not well represented in current NIR libraries.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Probing subwavelength in-plane anisotropy with antenna-assisted infrared nano-spectroscopy

Infrared nano-spectroscopy based on scattering-type scanning near-field optical microscopy (s-SNOM) is commonly employed to probe the vibrational fingerprints of materials at the nanometer length scale. However, due to the elongated and axisymmetric tip shank, s-SNOM is less sensitive to the in-plane sample anisotropy in general. In this article, we report an easy-to-implement method to probe the in-plane dielectric responses of materials with the assistance of a metallic disk micro-antenna. As a proof-of-concept demonstration, we investigate here the in-plane phonon responses of two prototypical samples, i.e. in (100) sapphire and x-cut lithium niobate (LiNbO 3 ). In particular, the sapphire in-plane vibrations between 350 cm–1 to 800 cm–1 that correspond to LO phonon modes along the crystal b- and c-axis are determined with a spatial resolution of < λ/10, without needing any fitting parameters. In LiNbO 3 , we identify the in-plane orientation of its optical axis via the phonon modes, demonstrating that our method can be applied without prior knowledge of the crystal orientation. Furthermore, our method can be elegantly adapted to retrieve the in-plane anisotropic response of a broad range of materials, i.e. subwavelength microcrystals, van-der-Waals materials, or topological insulators.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Detailed Characterization of an Annealed Reduced Graphene Oxide Catalyst for Selective Peroxide Formation Activity

Recently, electrochemical hydrogen peroxide (H 2 O 2 ) generation from oxygen molecules has been extensively studied. Thus far, the best peroxide activity under alkaline conditions has been reported at the surface of a mild reduced graphene oxide annealed at 600 °C (mrGO-600). However, the detailed material information, such as chemical functionality and structural morphology, is unknown, which results in ambiguous debates on its catalytic active sites. Therefore, to solve this problem, we intensively characterize the structure of mrGO-600 to clarify the origin of its catalytic activity. Various characterizations, including X-ray photoelectron spectroscopy, Raman spectroscopy, infrared spectroscopy, near-edge X-ray absorption fine spectroscopy, and high-resolution transmittance electron microscopy coupled with in situ infrared spectroelecrochemistry, reveal that the annealing process generates not only various hole edge defects that are related to the ring ether group but also numerous point defects that result in a small-sized disconnected graphitic carbon region. These defects are believed to form a unique atomic level configuration in mrGO-600, which enables it to facilitate high peroxide-generated activity from oxygen molecules in an alkaline electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Analysis of Physical and Structural Properties of Alkali Oxide–Modified Tellurite Glasses

Glasses in the system xM 2 O·(1-x)TeO 2 (0 ≤ x ≤ 0.25), where M = Li, Na, K, Rb, Cs, were made by melting in platinum crucibles. Various quenching methods were used to make each glass because some glasses require extremely rapid cooling. Physical properties such as the glass transition onset temperature (Tg) and density (ρ) were measured. In order to explore the short-range structure in these glasses, Raman spectroscopy, infrared spectroscopy, and high-energy x-ray diffraction were used. Furthermore, these experiments on tellurite glasses were performed to find correlations between the physical and structural properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of Carbon Doping on CO 2 –Reduction Activity of Single Cobalt Sites in Graphitic Carbon Nitride

Single atom catalysts have demonstrated interesting activity in a variety of applications. In this study, we prepared single C o2+ sites on graphitic carbon nitride (C 3 N 4 ), which was doped with carbon for enhanced activity in visible-light CO 2 reduction. The synthesized materials were characterized with a variety of techniques, including microscopy, X-ray powder diffraction, UV-vis spectroscopy, infrared spectroscopy, photoluminescence spectroscopy, and X-ray absorption spectroscopy. Here, doping C 3 N 4 with carbon was found to have profound effect on the photocatalytic activity of the single Co 2+ sites. At relatively low levels, carbon doping enhanced the photoresponse of C 3 N 4 in the visible region and improved charge separation upon photoactivation, thereby enhancing the photocatalytic activity. Furthermore, high levels of carbon doping were found to be detrimental to the photocatalytic activity of the single Co 2+ sites by altering the structure of C 3 N 4 and generating defect sites responsible for charge recombination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Phosphate tolerance of nitrogen-coordinated-iron-carbon (FeNC) catalysts for oxygen reduction reaction: A size-related hindrance effect

The greatest challenges facing the large – scale commercialization of the intermediate temperature phosphoric acid fuel cell (PAFC) technology are: (i) the high cost of Pt catalyst that is required to overcome the slow kinetics of oxygen reduction reaction (ORR) on the PAFC cathode, and (ii) deactivation of the Pt catalyst by exposure to the phosphoric acid electrolyte. Inexpensive carbon-based materials, particularly iron- spectroscopy is used to explore the phenomenon of phosphate poisoning nitrogen-coordinated carbon supported catalysts (FeNC), are promising cathodes for PAFCs. The higher ORR activation energy and phosphate poisoning resistance of FeNC present a clear advantage over the Pt-based commercial catalysts that are easily susceptible to deactivation after exposure to phosphate anions. While the immunity of FeNC catalysts to phosphate anion poisoning has been reported previously, this work explores the counter-intuitive and conditional nature of this poisoning resistance based on the properties of the carbon support used in the preparation of the FeNC catalyst. Additionally, a combination of electrochemical measurements with characterization experiments performed using X-ray photoelectron spectroscopy, infrared spectroscopy and in-situ X-ray absorption on FeNC catalysts synthesized from two different carbon supports. Results from these studies reveal a “size-related hindrance effect” wherein the ORR active Fe centers in FeNC remain inaccessible to larger anions such as phosphate when the Fe sites are present deeper inside the pores of a carbon support with high porosity. However, FeNC catalyst is poisoned by phosphate anions when synthesized using a carbon support with low porosity. This work helps gain insights into the nature of active sites in FeNC catalysts that will be useful in designing precious-metal free ORR catalysts for intermediate temperature fuel cell technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗