Search NASA⌕ Search

SEARCH · Search NASA

Results for “INSURANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Evaluation of boron-epoxy-reinforced titanium tubular truss for application to a space shuttle booster thrust structure

Results of a study to demonstrate the applicability of boron-epoxy-composite-reinforced titanium tubular members to a space shuttle booster thrust structure are presented and discussed. The experimental results include local buckling of all-composite and composite-reinforced-metal cylinders with low values of diameter-thickness ratio, static tests on composite-to-metal bonded step joints, and a test to failure of a boron-epoxy-reinforced titanium demonstration truss. The demonstration truss failed at 118 percent of design ultimate load. Test results and analysis for all specimens and the truss are compared. Comparing an all-titanium design and a boron-epoxy-reinforced-titanium (75 percent B-E and 25 percent Ti) design for application to the space shuttle booster thrust structure indicates that the latter would weigh approximately 24 percent less. Experimental data on the local buckling strength of cylinders with a diameter-thickness ratio of approximately 50 are needed to insure that undue conservatism is not used in future designs.

Corvelli, N.↗
NASA NTRS1972

Silicon solar cell development and radiation effects study for low temperature and low illumination intensity operation, volume 2

The results are presented of a study to determine the effect of in-situ proton irradiation upon low temperature, low intensity performance of several cell types. The cell types were selected in an attempt to distinguish variations in temperature-dependent radiation resistance which could be attributed to the n-p or p-n structure, diffused or implanted junctions, crucible grown or float-zone type base material, and high or low base resistivity. The results indicate that while expected variations of performance occur at room temperature, all cell types degrade more or less similarly at lower temperatures with normalized degradation becoming increasingly rapid as temperature is reduced. Recommendations for an optimized cell for Jupiter probe use are included along with a definition of the testing required on these cells to insure good performance characteristics.

Kirkpatrick, A. R.↗
NASA NTRS1972

Design considerations for divers' breathing gas systems

Some of the design methods used to establish the gas storage, mixing, and transfer requirements for existing deep dive systems are discussed. Gas mixing systems appear essential to provide the low oxygen concentration mixtures within the converging tolerance range dictated by applications to increasing depths. Time related use of gas together with the performance of the gas transfer system insures a reasonable time frame for systems application.

Hansen, O. R.↗
NASA NTRS1972

The Boeing 747 fatigue integrity program

The fatigue integrity program which was established to insure economic operations and to provide foundation data for inspection and maintenance is discussed. Significant features of the 747 fatigue integrity program are: (1) fatigue analyses which are continually updated to reflect design changes, fatigue test results, and static and flight load survey measurements; (2) material selection and detail design by using initial fatigue analyses, service experience, and testing; and (3) fatigue testing to check detail design quality and to verify the analyses, culminated by the test of a structurally complete airframe. Fatigue stress analyses were performed with the aid of experimental as well as analytical procedures. Extensive application was made of the stress severity factor, developed at Boeing, for evaluating peak stresses in complex joints. A frame of reference was established by families of structural fatigue performance curves (S-N curves) encompassing the range of materials and fatigue qualities anticipated for the 747 airplane design.

Spencer, M. M.↗
NASA NTRS1972

Program management aid for redundancy selection and operational guidelines

Although this criterion was developed specifically for use on the shuttle program, it has application to many other multi-missions programs (i.e. aircraft or mechanisms). The methodology employed is directly applicable even if the tools (nomographs and equations) are for mission peculiar cases. The redundancy selection criterion was developed to insure that both the design and operational cost impacts (life cycle costs) were considered in the selection of the quantity of operational redundancy. These tools were developed as aids in expediting the decision process and not intended as the automatic decision maker. This approach to redundancy selection is unique in that it enables a pseudo systems analysis to be performed on an equipment basis without waiting for all designs to be hardened.

Hodge, P. W.↗
NASA NTRS1972

Magnetometer instrument team studies for the definition phase of the outer planets grand tour

The objectives of magnetic field investigations on missions to the outer planets were defined as well as an instrumentation system, a program of studies and instrument development tasks was proposed for the mission definition phase of the Outer Planets Grand Tour project. A report on the status of this program is given. Requirements were also established for the spacecraft and the mission which would insure their compatibility with the magnetic field investigation proposed for the outer planets missions and developed figures of merit for encounter trajectories. The spacecraft-instrumentation interface and the on-board data handling system were defined in various reports by the Project Team and in the reports by the Science Steering Group. The defining program for exploring the outer planets within the more restrictive constraints of the Mariner Jupiter-Saturn project included defining a limited magnetic field investigation.

Coleman, P. J., Jr.↗
NASA NTRS1972

Flutter technology for space shuttle

The development of analytical and experimental techniques needed to predict space shuttle flutter boundaries and insure adequate flutter margins and anticipated problems associated with aeroelastic-model and full-scale testing to validate flutter clearance are considered. Results illustrating the best available tools for subsonic and supersonic flutter prediction are presented. Programs currently underway which will help overcome the difficult problems envisioned for the transonic wind-tunnel and flight flutter test program are also discussed.

Goetz, R. C.↗
NASA NTRS1972

Analysis of instrumentation error effects on the identification accuracy of aircraft parameters

An analytical investigation is presented of the effect of unmodeled measurement system errors on the accuracy of aircraft stability and control derivatives identified from flight test data. Such error sources include biases, scale factor errors, instrument position errors, misalignments, and instrument dynamics. Two techniques (ensemble analysis and simulated data analysis) are formulated to determine the quantitative variations to the identified parameters resulting from the unmodeled instrumentation errors. The parameter accuracy that would result from flight tests of the F-4C aircraft with typical quality instrumentation is determined using these techniques. It is shown that unmodeled instrument errors can greatly increase the uncertainty in the value of the identified parameters. General recommendations are made of procedures to be followed to insure that the measurement system associated with identifying stability and control derivatives from flight test provides sufficient accuracy.

Sorensen, J. A.↗
NASA NTRS1972

Optimal inputs for system identification

Identification criteria are presented for linear dynamic systems with and without process noise. With process noise, the state equations are replaced by the Kalman filter equations. If the identification performance index is expanded in a Taylor's series with respect to the parameters to be identified, then maximizing the weighting factor of the quadratic term with respect to the inputs will insure that an identification algorithm will converge more rapidly and to a more accurate result than with nonoptimal inputs. The expectation of this weighting factor is the Fisher information matrix, and its inverse is a lower bound for the covariance of the parameters. Direct and indirect methods of calculating the information matrix are presented for systems with and without process noise.

Reid, D. B.↗
NASA NTRS1972

NASA's experiences in technology transfer.

NASA's programs to transfer its technological advances have evolved from a passive dissemination of technical information and service to one of active product development for public needs. The rational and development difficulties involved in the firemen's breathing system is the case example chosen to demonstrate the need for advanced technological design improvements for urban products. Emphasis is given to the total need and requirements for the improved product and the mechanism chosen to insure their direct involvement in the design and development effort. Technology transfer, involving the capabilities of NASA people, is identified as a key factor in the process.

Hamilton, J. T.↗
NASA NTRS1972

Development of STOLAND, a versatile navigation, guidance and control system.

STOLAND has been developed to perform navigation, guidance, control, and flight management experiments in advanced V/STOL aircraft. An integrated digital concept using modern avionics components was selected as the simplest approach to maximizing versatility and growth potential. Unique flexibility has been obtained by use of a single, general-purpose digital computer for all navigation, guidance, control, and displays computation. Modularity of the software insures easy change of experiments. The general-purpose computer is integrated with flexible pilot controls and with both electromechanical and CRT displays for maximum cockpit versatility. A complex hierarchy of control modes with safety monitors and interlocks has been provided.

Hansen, Q. M.↗
NASA NTRS1973

A simple, accurate depth check guage

Easily made, pen-light battery operated production check gauge has probe-activated switch with fail-safe features to insure proper operation. Parts can be reliably and quickly checked. Gauge is equipped with tolerance band adjustment and can use interchangeable probes for different applications. Accompanying tester permits frequent check of calibration.

Rauch, E. P.↗
NASA NTRS1972

Ride quality research activities at NASA Langley Research Center

Ride quality research to determine criteria to describe vehicle performance characteristics which will insure passenger comfort is discussed. The manner in which disciplines of vehicle environmental dynamics, structural dynamics, and electromechanical measurements are combined to define passenger environments is described. The activities of many governmental and private agencies in the field of passenger comfort are examined.

Connor, A. B.↗
NASA NTRS1972

An adaptive scheme for observing the state of an unknown linear system

A full order adaptive observer is described for observing the states of a single-input single-output observable continuous differential system with unknown parameters. Convergence of the observer states to those of the system is accomplished by directly changing the parameters of the observer using an adaptive law based upon Liapunov stability theory. Observer eigenvalues may be freely chosen. Some restriction is placed upon the system input in that it must be sufficiently rich in frequencies in order to insure convergence.

Carroll, R. L.↗
NASA NTRS1972

Space shuttle: Longitudinal aerodynamic characteristics of low aspect ratio wing configurations in ground effect for a moving and stationary ground surface

A 0.05-scale model of the NASA-MSC Orbiter 040A Configuration was tested. Test duration was approximately 80 hours during which the model was tested in and out of ground effect with a stationary and moving ground belt. Model height from ground plane surface was varied from one and one-half wing span to landing touchdown while angle of attack varied from -4 to 20 degrees. Eleven effectiveness and alternate configuration geometries were tested to insure complete analysis of low aspect ratio wing aircraft in the presence of ground effect. Test Mach number was approximately 0.067 with a corresponding dynamic pressure value of 6.5 psf.

Romere, P. O.↗
NASA NTRS1972

An experimental and theoretical investigation of the liquefaction dynamics of a phase change material in a normal gravity environment

Experimental and theoretical investigations were undertaken to determine the role of gravity-induced free convection upon the liquefaction dynamics of a cylindrical paraffin slab under normal gravity conditions. The experimental equipment consisted of a test cell, a fluid-loop heating system, and a multipoint recorder. The test chamber was annular in shape with an effective radius of 1.585 cm and a length of 5.08 cm. The heating chamber was a 1.906 cm diameter tube going through the center of the test chamber, and connected to the fluid loop heating system. All experimental runs were made with the longitudinal axis of the test cell in the vertical direction to insure that convection was not a function of the angular axis of the cell. Ten melting runs were made at various hot wall temperatures. Also, two pure conduction solidification runs were made to determine an experimental latent heat of fusion.

Bain, R. L.↗
NASA NTRS1973

Atmospheric energetics as related to cyclogenesis over the eastern United States

A method is presented to investigate the atmospheric energy budget as related to cyclogenesis. Energy budget equations are developed that are shown to be advantageous because the individual terms represent basic physical processes which produce changes in atmospheric energy, and the equations provide a means to study the interaction of the cyclone with the larger scales of motion. The work presented represents an extension of previous studies because all of the terms of the energy budget equations were evaluated throughout the development period of the cyclone. Computations are carried out over a limited atmospheric volume which encompasses the cyclone, and boundary fluxes of energy that were ignored in most previous studies are evaluated. Two examples of cyclogenesis over the eastern United States were chosen for study. One of the cases (1-4 November, 1966) represented an example of vigorous development, while the development in the other case (5-8 December, 1969) was more modest. Objectively analyzed data were used in the evaluation of the energy budget terms in order to minimize computational errors, and an objective analysis scheme is described that insures that all of the resolution contained in the rawinsonde observations is incorporated in the analyses.

West, P. W.↗
NASA NTRS1970

Occupational Medical Trends in the 70's from Industrial View

Industrial health measures to ensure worker productivity constitute physical examinations as well as environmental control systems. Considered are automatic record keeping facilities for case histories, preventive medical and mental counselling, development of safety standards, and health insurance and disability benefit plans. Cooperation of industry health programs with community health aspects is required to eliminate the loss of manpower capability through alcoholism or mental disease.

Williamson, S. M.↗