Search NASA⌕ Search

SEARCH · Search NASA

Results for “Incremental Computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

A simple solution to the Rietveld refinement recipe problem

Rietveld refinements are widely used for many purposes in the physical sciences. Conducting a Rietveld refinement typically requires expert input because correct results may require that parameters be added to the fit in the proper order. This order will depend on the nature of the data and the initial parameter values. A mechanism for computing the next parameter to add to the refinement is shown. The fitting function is evaluated with the current parameter value set and each parameter incremented and decremented by a small offset. This provides the partial derivatives with respect to each parameter, along with information to discriminate meaningful values from numerical computational errors. The implementation of this mechanism in the open-source GSAS-II program is discussed. This new method is discussed as an important step towards the development of automated Rietveld refinement technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Atacama Cosmology Telescope: The LABOCA/ACT survey of clusters at all Redshifts

We present a multi-wavelength analysis of 11 Sunyaev–Zel’dovich effect (SZE)-selected galaxy clusters (10 with new data) from the Atacama Cosmology Telescope (ACT) southern survey. We have obtained new imaging from the Large APEX Bolometer Camera (345 GHz; LABOCA) on the Atacama Pathfinder EXperiment (APEX) telescope, the Australia Telescope Compact Array (2.1 GHz; ATCA), and the Spectral and Photometric Imaging Receiver (250, 350, and 500 μm; SPIRE) on the Herschel Space Observatory.{sup 24} Spatially resolved 345 GHz SZE increments with integrated signal-to-noise ratio (S/N)>5 are found in six clusters. We compute 2.1 GHz number counts as a function of cluster-centric radius and find significant enhancements in the counts of bright sources at projected radii θ<θ{sub 2500c}. By extrapolating in frequency, we predict that the combined signals from 2.1 GHz-selected radio sources and 345 GHz-selected submillimeter galaxies (SMGs) contaminate the 148 GHz SZE decrement signal by ∼5% and the 345 GHz SZE increment by ∼18%. After removing radio source and SMG emission from the SZE signals, we use ACT, LABOCA, and (in some cases) new Herschel SPIRE imaging to place constraints on the clusters’ peculiar velocities. The sample’s average peculiar velocity relative to the cosmic microwave background is 〈v{sub p}〉=153±383 km s{sup −1}.

79 ASTRONOMY AND ASTROPHYSICS↗

A detailed study of pre-heating effects in electron beam melting powder bed fusion process

Metal-based additive manufacturing processes, such as powder bed fusion with electron beam (PBF-EB) process, also referred to as electron beam melting (EBM), can produce high-density parts with minimal residual stresses due to the uniform and coherent preheating of the powder bed. However, understanding and controlling the multiple stages of preheating is required to enable the production of high-quality, consistent parts of various materials. This work presents a large-scale, multi-layer, three-dimensional numerical analysis focused on studying the preheating stages for predicting thermal history during the PBF-EB process. The model follows a continuous multi-stage cyclic process, that incorporates all the main stages of the PBF-EB process for 316 L stainless steel. This includes the gradual deposition of a new powder layer, the first and second preheating levels of the powder bed, and the energy deposition during melting (excluding the actual melt-pool behavior simulation). The model employs an adaptive time-scaling approach that automatically adjusts the energy deposition for each solution time-increment. This allows for localized changes in time-resolution over an otherwise computationally expensive multi-layer procedure. The material property variations are also taken into account, with an emphasis on the subtle irreversible changes in powder effective thermal conductivity after the two requisite preheating stages of the powder bed. This effect is studied using simplified conductivity models from the literature for partially sintered powder, validated by a dedicated experiment and numerical simulation. The large-scale model is then used to estimate the actual temperatures during first and second preheating levels for 316 L steel, which is not yet fully supported commercially for PBF-EB. Model predictions are corroborated by experiments, using and analyzing IR images, taken at the completion of each layer by the machine’s built-in infrared camera. The current model also incorporates a qualitative assessment for the effects of conductivity change during pre-heating, as well as evaluates the applicability of the time-scaling approach.

36 MATERIALS SCIENCE↗

Atomic resolution convergent beam electron diffraction analysis using convolutional neural networks

Two types of convolutional neural network (CNN) models, a discrete classification network and a continuous regression network, were trained to determine local sample thickness from convergent beam diffraction (CBED) patterns of SrTiO 3 collected in a scanning transmission electron microscope (STEM) at atomic column resolution. Acquisition of atomic resolution CBED patterns for this purpose requires careful balancing of CBED feature size in pixels, acquisition speed, and detector dynamic range. The training datasets were derived from multislice simulations, which must be convolved with incoherent source broadening. Sample thicknesses were also determined using quantitative high-angle annular dark-field (HAADF) STEM images acquired simultaneously. The regression CNN performed well on sample thinner than 35 nm, with 70% of the CNN results within 1 nm of HAADF thickness, and 1.0 nm overall root mean square error between the two measurements. The classification CNN was trained for a thicknesses up to 100 nm and yielded 66% of CNN results within one classification increment of 2 nm of HAADF thickness. Our approach depends on methods from computer vision including transfer learning and image augmentation.

36 MATERIALS SCIENCE↗

Active Thermochemical Tables: the thermophysical and thermochemical properties of methyl, CH 3 , and methylene, CH 2 , corrected for nonrigid rotor and anharmonic oscillator effects

The thermophysical properties (isobaric heat capacity, entropy, enthalpy increment) of two prominent radicals, methyl, CH 3 , and methylene, CH 2 , were computed using the Nonrigid Rotor Anharmonic Oscillator (NRRAO) approach and compared to their RRHO counterparts, demonstrating significant differences between the results from the two approaches. Methylene presents a typical case in which the NRRAO thermophysical properties have significantly higher values than their RRHO counterparts at higher temperatures. In the case of methyl, the positive anharmonicity of the umbrella motion causes an opposite effect, and the NRRAO corrected thermophysical properties have lower values than their RRHO counterparts. The NRRAO corrected thermophysical properties, in turn, affect the resulting thermochemical properties. Here, two reactions important in combustion modelling were tested: the recombination of methyl radical with hydrogen atoms to form methane, and the recombination of two methyl radicals to form ethane. The related NRRAO equilibrium constants differ significantly from their RRHO analogs, and the consequences for chemical modelling are discussed. Also reported are the most current ATcT enthalpies of formation for CH n (n = 4-0) species and for C 2 H 6 , together with the tightly related sequential bond dissociation enthalpies along with the CHn series.

74 ATOMIC AND MOLECULAR PHYSICS↗

Anisotropic Power Law Strain Correlations in Sheared Amorphous 2D Solids

The local deformation of steadily sheared two-dimensional Lennard-Jones glasses is studied via computer simulations at zero temperature. In the quasistatic limit, spatial correlations in the incremental strain field are highly anisotropic. The data show power law behavior with a strong angular dependence of the scaling exponent, and the strongest correlations along the directions of maximal shear stress. These results support the notion that the jamming transition at the onset of flow is critical, but suggest unusual critical behavior. The predicted behavior is testable through experiments on sheared amorphous materials such as bubble rafts, foams, emulsions, granular packings, and other systems where particle displacements can be tracked.

36 MATERIALS SCIENCE↗

Performance and Emissions of an SI Engine Fueled With DME-Propane Blends

Dimethyl Ether (DME) is an alternative fuel that can be produced renewably and has the potential for lower CO and NOx emissions than conventional petroleum-based fuels. Blending DME with another gaseous fuel such as propane, which has a lower knock tendency than gasoline, can allow this fuel to be leveraged on SI engines. In this study, the use of DME-propane blends on a spark ignition (SI) engine was studied via computer simulations in order to understand the impact on engine performance and emissions and to identify the knock limitations of using such fuel blends. A 2L Hyundai SI engine was modeled in GT Power and the model was validated by comparing it with computational fluid dynamics (CFD) simulation results. Starting from pure propane, DME was added incrementally until knock was observed in the engine. Results indicate that it is feasible to run propane with DME percentages up to 35% before severe knock impacts were observed. The BTE was higher, but the BSFC also increased for DME-propane blends as compared to gasoline. Here, an increase in NOx emissions was detected along with a significant decrease in CO emissions. CO 2 emissions declined for propane as compared to gasoline but increased with the addition of DME.

alternative fuels↗

Scaling Structured Multigrid to 500K+ Cores Through Coarse-Grid Redistribution

The effcient solution of sparse, linear systems resulting from the discretization of partial differential equations is crucial to the performance of many physics-based simulations. The algorithmic optimality of multilevel approaches for common discretizations makes them a good candidate for an efficient parallel solver. Yet, modern architectures for high-performance computing systems continue to challenge the parallel scalability of multilevel solvers. While algebraic multigrid methods are robust for solving a variety of problems, the increasing importance of data locality and cost of data movement in modern architectures motivates the need to carefully exploit structure in the problem. Robust logically structured variational multigrid methods, such as Black Box Multigrid (BoxMG), maintain structure throughout the multigrid hierarchy. This avoids indirection and increased coarse- grid communication costs typical in parallel algebraic multigrid. Nevertheless, the parallel scalability of structured multigrid is challenged by coarse-grid problems where the overhead in communication dominates computation. In this paper, an algorithm is introduced for redistributing coarse-grid problems through incremental agglomeration. Guided by a predictive performance model, this algorithm provides robust redistribution decisions for structured multilevel solvers. A two-dimensional diffusion problem is used to demonstrate the significant gain in performance of this algorithm over the previous approach that used agglomeration to one processor. In addition, the parallel scalability of this approach

97 MATHEMATICS AND COMPUTING↗

GPU Accelerated Event Detection Algorithm

Smart grid external require new algorithmic approaches as well as parallel formulations. One of the critical components is the prediction of changes and detection of anomalies within the power grid. The state-of-the-art algorithms are not suited to handle the demands of streaming data analysis. (i) need for events detection algorithms that can scale with the size of data, (ii) need for algorithms that can not only handle multi dimensional nature of the data, but also model both spatial and temporal dependencies in the data, which, for the most part, are highly nonlinear, (iii) need for algorithms that can operate in an online fashion with streaming data. The GAEDA code is a new online anomaly detection techniques that take into account spatial, temporal, multi-dimensional aspects of the data set. The basic idea behind the proposed approach is to (a) to convert a multi-dimensional sequence into a univariate time series that captures the changes between successive windows extracted from the original sequence using singular value decomposition (SVD), and then (b) to apply known anomaly detection techniques for univariate time series. A key challenge for the proposed approach is to make the algorithm scalable to huge datasets by adopting techniques from perturbation theory, incremental SVD analysis. We used recent advances in tensor decomposition techniques which reduce computational complexity to monitor the change between successive windows and detect anomalies in the same manner as described above. Therefore we propose to develop the parallel solutions on many core systems such as GPUs, because these algorithms involve lot of numerical operations and are highly data-parallelizable.

Source record↗

Modeling CANDU-6 liquid zone controllers for effects of thorium-based fuels

We use the DRAGON code to model the CANDU-6 liquid zone controllers and evaluate the effects of thorium-based fuels on their incremental cross sections and reactivity worth. We optimize both the numerical quadrature and spatial discretization for 2D cell models in order to provide accurate fuel properties for 3D liquid zone controller supercell models. We propose a low computer cost parameterized pseudo-exact 3D cluster geometries modeling approach that avoids tracking issues on small external surfaces. This methodology provides consistent incremental cross sections and reactivity worths when the thickness of the buffer region is reduced. When compared with an approximate annular geometry representation of the fuel and coolant region, we observe that the cluster description of fuel bundles in the supercell models does not increase considerably the precision of the results while increasing substantially the CPU time. In addition, this comparison shows that it is imperative to finely describe the liquid zone controller geometry since it has a strong impact of the incremental cross sections. This paper also shows that liquid zone controller reactivity worth is greatly decreased in presence of thorium-based fuels compared to the reference natural uranium fuel, since the fission and the fast to thermal scattering incremental cross sections are higher for the new fuels. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Real-Time Degradation Estimation Approach for Batteries in PV and Battery Hybrid Plant Operation

Conventional cyclic degradation assessment for batteries is often limited in its ability to provide real-time degradation information during operation, because the estimation of degradation is commonly performed after a specific evaluation period. Modified methods can provide real-time evaluation but at the cost of high computation complexity. This paper proposes a novel estimation method that addresses these limitations. It efficiently determines the incremental degradation of any two consecutive state-of-charge (SOC) samples during battery operation, thus enabling real-time estimation. To validate the proposed method, measurement data from lithium-ion phosphate (LFP) battery testing was adopted, and the results were compared with the conventional model and the measured capacity. The results demonstrate accuracy over the evaluation period in terms of cumulative degradation, and a reduced computation cost compared with other methods. This approach has benefits in various applications, especially in cases where batteries experience irregular charging and discharging stress cycles such as PV and battery hybrid plants.

Wang, Shumeng↗

Co-optimization of CO 2 -EOR and Storage Processes under Geological Uncertainty

This paper presents an integrated numerical framework to co-optimize EOR and CO 2 storage performance in the Farnsworth field unit (FWU), Ochiltree County, Texas. The framework includes a field-scale compositional reservoir flow model, an uncertainty quantification model and a neural network optimization process. The reservoir flow model has been constructed based on the field geophysical, geological, and engineering data. A laboratory fluid analysis was tuned to an equation of state and subsequently used to predict the thermodynamic minimum miscible pressure (MMP). A history match of primary and secondary recovery processes was conducted to estimate the reservoir and multiphase flow parameters as the baseline case for analyzing the effect of recycling produced gas, infill drilling and water alternating gas (WAG) cycles on oil recovery and CO 2 storage. A multi-objective optimization model was defined for maximizing both oil recovery and CO 2 storage. The uncertainty quantification model comprising the Latin Hypercube sampling, Monte Carlo simulation, and sensitivity analysis, was used to study the effects of uncertain variables on the defined objective functions. Uncertain variables such as bottom hole injection pressure, WAG cycle, injection and production group rates, and gas-oil ratio among others were selected. The most significant variables were selected as control variables to be used for the optimization process. A neural network optimization algorithm was utilized to optimize the objective function both with and without geological uncertainty. The vertical permeability anisotropy (Kv/Kh) was selected as one of the uncertain parameters in the optimization process. The simulation results were compared to a scenario baseline case that predicted CO 2 storage of 74%. The results showed an improved approach for optimizing oil recovery and CO 2 storage in the FWU. The optimization process predicted more than 94% of CO 2 storage and most importantly about 28% of incremental oil recovery. The sensitivity analysis reduced the number of control variables to decrease computational time. A risk aversion factor was used to represent results at various confidence levels to assist management in the decision-making process. The defined objective functions were proved to be a robust approach to co-optimize oil recovery and CO 2 storage. The Farnsworth CO 2 project will serve as a benchmark for future CO 2 –EOR or CCUS projects in the Anadarko basin or geologically similar basins throughout the world.

54 ENVIRONMENTAL SCIENCES↗

An Algorithm for Atom-Centered Lossy Compression of the Atomic Orbital Basis in Density Functional Theory Calculations

Large atomic-orbital (AO) basis sets of at least triple and preferably quadruple-ζ (QZ) size are required to adequately converge Kohn–Sham density functional theory (DFT) calculations toward the complete basis set limit. However, incrementing the cardinal number by one nearly doubles the AO basis dimension, and the computational cost scales as the cube of the AO dimension, so this is very computationally demanding. Here, in this work, we develop and test a threshold-based natural atomic orbital (NAO) scheme in which ϵ-NAOs are obtained as eigenfunctions of atomic blocks of the density matrix in a one-center orthogonalized representation. This enables compression of the AO basis that is optimal for a given threshold, 10 –ϵ , by discarding NAOs with occupation numbers below that threshold. Extensive pilot test calculations using the Hartree–Fock functional and taking the converged density matrix as input suggest that a threshold of 10 –5 can yield a compression factor (ratio of AO to compressed ϵ-NAO dimension) between 2.5 and 4.5 for the QZ pc-3 basis. The errors in relative energies are typically less than 0.1 kcal/mol when the compressed basis is used instead of the uncompressed basis. Between 10 and 100 times smaller errors (i.e., usually less than 0.01 kcal/mol) can be obtained with a threshold 10 –7 , while the compression factor is typically between 2 and 2.5.

basis sets↗

Interactions of Polar and Nonpolar Groups of Alcohols in Zeolite Pores

Understanding the quantitative interactions among zeolite pore walls, Bro̷nsted acid sites, and molecules with both polar and nonpolar regions is essential for scoping out the potential of zeolites as sorbents and catalysts. Purely siliceous zeolites (MFI and Beta in the present study) are hydrophobic, whereas those containing aluminum are considered hydrophilic, preferentially adsorbing organic molecules even in aqueous environments. To characterize these interactions, we use primary alcohols of increasing molecular weight, quantifying their specific interactions in the confined pore space of the alkyl (CH x ) and OH groups. Three types of interactions were identified: (i) alkyl CH x groups interacting with the zeolite pore walls (approximately 10 kJ mol −1 per carbon), (ii) alcohol OH groups interacting with the pore walls (30−35 kJ mol −1 ), and (iii) alcohol OH groups interacting with Bro̷nsted acid sites (37 kJ mol −1 ). All three interactions were well mirrored by computational simulations. The contribution of the alkyl CH x groups was inferred from the incremental increase in sorption enthalpy with increasing molecular weight; the interaction strength of the OH groups was determined by extrapolating the global adsorption enthalpy of the alcohols to a hypothetical OH group without an alkyl group. This value was identical to the adsorption enthalpy of water. The experiments demonstrated that only water has an adsorption enthalpy on zeolite pore walls lower than its condensation enthalpy (30−35 kJ mol −1 vs 45 kJ mol −1 ), limiting the concentration of water that can be adsorbed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Automated system for the calibration of magnetometers

A completely nonmagnetic calibration platform has been developed and constructed at DTU Space (Technical University of Denmark). It is intended for on-site scalar calibration of high-precise fluxgate magnetometers. An enhanced version of the same platform is being built at the Czech Technical University. There are three axes of rotation in this design (compared to two axes in the previous version). The addition of the third axis allows us to calibrate more complex devices. An electronic compass based on a vector fluxgate magnetometer and micro electro mechanical systems (MEMS) accelerometer is one example. The new platform can also be used to evaluate the parameters of the compass in all possible variations in azimuth, pitch, and roll. The system is based on piezoelectric motors, which are placed on a platform made of aluminum, brass, plastic, and glass. Position sensing is accomplished through custom-made optical incremental sensors. The system is controlled by a microcontroller, which executes commands from a computer. The properties of the system as well as calibration and measurement results will be presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The ATLAS Data Management System Rucio: Supporting LHC Run-2 and beyond

With this contribution we present some recent developments made to Rucio, the data management system of the High-Energy Physics Experiment ATLAS. Already managing 300 Petabytes of both official and user data, Rucio has seen incremental improvements throughout LHC Run-2, and is currently laying the groundwork for HEP computing in the HL-LHC era. The focus of this contribution are (a) the automations that have been put in place such as data rebalancing or dynamic replication of user data, as well as their supporting infrastructures such as real-time networking metrics or transfer time predictions; (b) the flexible approach towards inclusion of heterogeneous storage systems, including object stores, while unifying the potential access paths using generally available tools and protocols; (c) machine learning approaches to help with transfer throughput estimation; and (d) the adoption of Rucio for two other experiments, AMS and Xenon1t. We conclude by presenting operational numbers and figures to quantify these improvements, and extrapolate the necessary changes and developments for future LHC runs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Breast dosimetry in transverse and longitudinal field MRI-Linac radiotherapy systems

Purpose: In the framework of developing the integration of a MRI-Linac system, configurations of MRI-Linac units were simulated in order to improve the dose distribution in tangential breast radiotherapy using transverse and longitudinal magnetic field geometries of Lorentz force for both medial and lateral tangential fields. Methods: In this work, the GEANT4 Monte Carlo (MC) code was utilized to compare dose distributions in breast radiotherapy for Linac-MR systems in the transverse and longitudinal geometries within humanoid phantoms across a range of magnetic field strengths of 0.5 and 1.5 T. The dose increment due to scattering from the coils was investigated for both geometries as well. Computed tomography images of two patients were used for MC simulations. One patient had intact breast while the other was mastectomized. In the simulations, planning and methods of chest wall irradiation were similar to the actual clinical planning. Results: In a longitudinal geometry, the magnetic field is shown to restrict the lateral spread of secondary electrons to the lung, heart, and contralateral organs, which reduced the mean dose of the ipsilateral lung and heart by means of 17.2% and 6% at 1.5 T, respectively. The transverse configuration exhibits a significant increase in tissue interface effects, which increased dose buildup in the entrance regions of the lateral and medial tangent beams to the planning target volume (PTV) and improved dose homogeneity within the PTV. The improved relative average homogeneity index for two patients to the PTV at magnetic field strength of 1.5 T with respect to no magnetic field case evaluated was 11.79% and 34.45% in the LRBP and TRBP geometries, respectively. In both geometries, the simulations show significant mean dose reductions in the contralateral breast and chest wall skin, respectively, by a mean of 16.6% and 24.9% at 0.5 T and 17.2% and 28.1% at 1.5 T in the transverse geometry, and 10.56% and 14.6% at 0.5 T and 11.3% and 16.3% at 1.5 T in the longitudinal geometry. Considering the scattered photons which reflected from the coils, the average relative dose of each voxel is slightly increased by 0.53% and 0.32% in the LRBP and TRBP geometries, respectively. Conclusions: Orienting the B0 magnetic field parallel to the photon beam axis, LRBP geometry, tends to restrict the radial spread of secondary electrons which resulted in dose reduction to the lung. Dosimetry issues observed in both Linac-MR geometries, such as changes to the lateral dose distribution, significantly exhibited dose reduction in the contralateral organs on a representative breast plan. Further, the results show sharper edge dose volume histogram curves at 1.5 T for both geometries, especially in the LRBP configuration.

60 APPLIED LIFE SCIENCES↗

XFEM Development for Modeling Crack Growth in Prototypical Welded Components

Nuclear power plant components are subjected to harsh operating environments that can lead to multiple degradation mechanisms in which fracture can play a prominent role. Predicting crack growth is important for assessing the integrity of welded components. The extended finite element method (XFEM) is an important tool for modeling such crack growth, and XFEM capabilities have been developed within the MOOSE framework. This report documents work in the MOOSE XFEM module to model fractures in three-dimensional representations of components using a topologically two-dimensional mesh to define cutting planes. Crack growth algorithms have been implemented to evolve the cutting mesh based on equations for stress corrosion cracking. Additionally, several usability and robustness improvements have been developed to enable three-dimensional fracture simulations. The cutting algorithms were demonstrated on a three-dimensional model of a prototypical reactor component undergoing stress corrosion cracking driven by idealized weld residual stresses. This is an incremental step toward using this capability to model more complex components with residual stresses computed through welding process simulations.

42 - ENGINEERING↗