Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interface morphology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Fluctuations of thermal conductivity and morphological stability

Compositional fluctuations of the binary alloy result in the corresponding fluctuations of the thermal conductivity of the material. During crystal growth, these fluctuations can significantly modify the local temperature fields at the liquid-solid interface. This, in turn, will affect the morphological stability of the growing interface. In this work, the temperature dependence of the thermal conductivity of the solid phase has been included into the Mullins-Sekerka formalism. A significant effect on the onset of the instability of planar interface has been predicted. It has been found, in particular, that for binary systems with the segregation coefficient above unity a flat interface is always unstable. The shape of the interface fluctuation should have a single harmonic character with a well defined wavelength.

Mazuruk, K.↗
DOE OSTI2025

Interface Evolutionand Long-Term Performance of NegativeCarbon Fiber Structural Electrodes

Abstract Laminated structural batteries present a transformative solution to reducing weight constraints in electric vehicles. These structural batteries are based on a multifunctional material that incorporates an energy storage function within a carbon fiber-reinforced polymer. Despite the potential of this technology, the intricate morphology of fiber–matrix or electrode–electrolyte interfaces and the impact of long-term cycling at low current rates (C-rates) on these interfaces remain insufficiently understood. This study addresses these critical knowledge gaps by examining the influence of matrix composition on the long-term electrochemical performance of structural battery electrodes and exploring advanced techniques to investigate carbon fiber–matrix interfaces. Localized imaging and X-ray scattering techniques were used to characterize morphological changes at the electrode–electrolyte interfaces by analyzing negative structural electrodes. The findings revealed that the matrix composition influences long-term electrochemical behavior and fiber–matrix interface formation. While the intrinsic properties of carbon fibers largely remain unaffected by long-term cycling, cycling promotes debonding at fiber–matrix interfaces. Nonetheless, residual regions of adhesion persist, underscoring the potential for preserving multifunctionality even under prolonged cycling conditions. These insights advance the understanding of interface dynamics, which is critical for optimizing structural battery technologies.

Chemistry↗
NASA NTRS1976

Flight 1 technical report for experiment 74-37 contained polycrystalline solidification in low-G

A .005 M solution of fluorescein in cyclohexanol was directionally solidified in a standard 10 x 10 x 45mm UV silica cuvette, using a bottom thermoelectric chilling device. Progress of the experiment was monitored by time lapse photography. During flight (SPAR I) the camera malfunctioned and only one quarter of the expected data were collected. Comparison of flight and ground specimens indicated that: (1) The dark green layer observed ahead of the solid-liquid interface which is most likely the solute-enriched zone, appears to be wider in the flight specimen; (2) Parasitic nucleation ahead of the solid-liquid interface in the flight sample led to an irregularly shaped interface, smaller grain size, equiaxed grain morphology and a larger average macroscopic growth rate; (3) The formation of equiaxed grains ahead of the solid-liquid interface in the flight specimen may be attributed to ordered islands within the liquid, which survived remelting because of the low degree of superheating (approximately equal to 1.5 C), did not settle because of reduced gravity and acted as nuclei during cooling.

Papaziak, J. M.↗
NASA NTRS1990

Morphological instability in a float zone

This paper examines the morphological instability of the freezing interface of the float zone in a crystal sheet for which the height of the liquid zone L = Lf + Lm (where Lf and Lm are the planar positions of the solidifying and melting interfaces) is smaller than the width and the thickness of the sheet. The Lf and Lm positions are calculated, and basic state concentration profiles are determined for a planar interfacial system. A linear stability analysis of this system is performed showing that the growth rate of disturbances is a modified version of the growth rate for a directional solidification system. It was found that shorter melt zone configurations are less susceptible to long wavelength morphological instability, indicating that, to suppress morphological instability in a float zone system, it is necessary to decrease the liquid zone height.

Humphreys, Laura B.↗
NASA NTRS1990

Interfacial dynamics of two liquids under an oscillating gravitational field

The evolution of two miscible liquids meeting at an initially sharp interface inside a cavity under microgravity g-jitter conditions is studied numerically. The response of the interface and kinematics of the flowfield to various g-jitter accelerations and aspect ratio variations is shown. The interface region acts like a vortex source sheet, and it can be unstable to Kelvin-Helmholtz and Rayleigh-Taylor instabilities. The vortices produced along the interface can serve as a stirring mechanism to promote local mixing. Below the critical Stokes-Reynolds number, the destabilization of the interface results in deformation into wavy structures. In some parameter regions, these structures oscillate in time; in others, they are quasi-steady. Above the critical Stokes-Reynolds number, 'chaotic' instability results, and the interface breaks into concentration pockets. The morphology of the initial breakup is similar to observed Rayleigh-Taylor instability. Subsequent mixing of the two fluids after the breakup of the interface is then very rapid.

Duval, Walter M. B.↗
NASA NTRS1979

Convective and morphological instability in vapor crystal growth

Theoretical and experimental work on the fluid dynamics of physical vapor transport is reported. It is shown that diffusion in viscous interaction with container walls leads to concentration gradients normal to the main transport direction. Consequently any convection threshold is removed. This coupling with convective instabilities makes the theoretical interpretation of earthbound (anisotropic) morphological stability studies on vapor-solid interfaces intractable. Hence low-gravity experiments are suggested that will allow for the establishment of morphological stability criteria under diffusion controlled conditions.

Rosenberger, F.↗
NASA NTRS1999

Potential Flow Interactions With Directional Solidification

The effect of convective melt motion on the growth of morphological instabilities in crystal growth has been the focus of many studies in the past decade. While most of the efforts have been directed towards investigating the linear stability aspects, relatively little attention has been devoted to experimental and numerical studies. In a pure morphological case, when there is no flow, morphological changes in the solid-liquid interface are governed by heat conduction and solute distribution. Under the influence of a convective motion, both heat and solute are redistributed, thereby affecting the intrinsic morphological phenomenon. The overall effect of the convective motion could be either stabilizing or destabilizing. Recent investigations have predicted stabilization by a flow parallel to the interface. In the case of non-parallel flows, e.g., stagnation point flow, Brattkus and Davis have found a new flow-induced morphological instability that occurs at long wavelengths and also consists of waves propagating against the flow. Other studies have addressed the nonlinear aspects (Konstantinos and Brown, Wollkind and Segel)). In contrast to the earlier studies, our present investigation focuses on the effects of the potential flow fields typically encountered in Hele-Shaw cells. Such a Hele-Shaw cell can simulate a gravity-free environment in the sense that buoyancy-driven convection is largely suppressed, and hence negligible. Our interest lies both in analyzing the linear stability of the solidification process in the presence of potential flow fields, as well as in performing high-accuracy nonlinear simulations. Linear stability analysis can be performed for the flow configuration mentioned above. It is observed that a parallel potential flow is stabilizing and gives rise to waves traveling downstream. We have built a highly accurate numerical scheme which is validated at small amplitudes by comparing with the analytically predicted results for the pure morphological case. We have been able to observe nonlinear effects at larger times. Preliminary results for the case when flow is imposed also provide good validation at small amplitudes.

Buddhavarapu, Sudhir S.↗
NASA NTRS1977

Effect of surface texture by ion beam sputtering on implant biocompatibility and soft tissue attachment

The objectives in this report were to use the ion beam sputtering technique to produce surface textures on polymers, metals, and ceramics. The morphology of the texture was altered by varying both the width and depth of the square pits which were formed by ion beam erosion. The width of the ribs separating the pits were defined by the mask used to produce the texture. The area of the surface containing pits varies as the width was changed. The biological parameters used to evaluate the biological response to the texture were: (1) fibrous capsule and inflammatory response in subcutaneous soft tissue; (2) strength of the mechanical attachment of the textured surface by the soft tissue; and (3) morphology of the epidermal layer interfacing the textured surface of percutaneous connectors. Because the sputter yield on teflon ribs was approximately an order of magnitude larger than any other material the majority of the measurements presented in the report were obtained with teflon.

Gibbons, D. F.↗
NASA NTRS1978

Oxide morphology and spalling model for NiAl

A scanning electron microscope equipped with an energy dispersive spectrographic unit was used to study in detail the Al2O3 oxide morphology and oxide-metal interface of a nickel-rich NiAl alloy (Ni-42 at% Al) with a view toward providing information relevant to spalling theories in the MCrAlY system. In addition, the kinetics of spalling was studied for critical evaluation of one of the step-process spall models and for collection of pertinent experimental data. Cyclic oxidation tests were run in 1-atm air at about 1100 C, and isothermal specimens were examined from 2 min to 200 hr of exposure. It is shown that oxide spalling occurs primarily at the oxide-metal interface in an intergranular mode, that crystallographic Kirkendall voids arise as a result of oxidation, and that the fractional area of spalled oxide varies widely in cyclic tests but increases with the square of oxide thickness for isothermal tests. A spall model is developed in the form of a summation series.

Smialek, J. L.↗
NASA NTRS1984

Solidification of undercooled metals

The present investigation is concerned with the subject of undercooling (i.e., supercooling) in the case of metal alloys, taking into account the effects of undercooling on microstructure and microsegregation in alloys which solidify in a crystalline manner. Techniques for obtaining a large degree of undercooling are discussed. These techniques make it possible to eliminate heterogeneous nucleants from the melt and to remove container nucleation effects. The nucleation behavior of small metal droplets is considered along with the formation of a dispersion of fine droplets in a suitable inert medium, the mixing of fine metal powders with glass powder, and the levitation melting technique. Attention is given to solidification with rapid interface velocity, aspects of dendritic morphology, and thermal measurements during solidification of undercooled droplets.

Flemings, M. C.↗
NASA NTRS1995

Plasmas in the outer heliosphere

We review the observed properties of the solar wind in the outer heliosphere, including observations from Voyager and the Pioneers, as well as from inner heliospheric probes as appropriate. These observations are crucial to modeling of the heliosphere and its interactions with the interstellar medium, since the wind ram pressure and its temporal variations are important in understanding the distance to the termination shock and heliopause and how those boundaries might vary in time. We focus on results since Solar Wind 7. Among the issues we will discuss are: (1) the time scales for and statistical properties of variations in the ram pressure in the outer heliosphere, and how those variations might affect the morphology of the heliospheric/interstellar medium interface; (2) the question of possible solar wind slowing in the outer heliosphere due to the pick-up of interstellar ions; (3) the issue of whether there is bulk heating of the solar wind associated either with interstellar ion pick-up or with continued heating due to stream-stream interactions; (4) evidence for latitudinal variations in solar wind properties; and (5) the 1.3 year periodicities apparent in the outer heliosphere, and the close correspondence with similar variations seen with inner heliospheric probes.

Belcher, J. W.↗
DOE OSTI2025

Unraveling Impurity-Dependent Morphological and Chemical Evolution of Ni–20Cr Alloy in Eutectic LiCl–KCl Molten Salt

Understanding the interfacial evolution of alloys in molten salt with different amounts of water (H 2 O) and oxygen (O 2 ) impurities is significant for applications in many fields, including concentrated solar power, molten salt reactors, and applications in pyrochemical reprocessing and electrorefining. Additionally, the impurity-driven corrosion mechanisms that lead to various morphological and chemical evolution characteristics at the interfaces of structural alloys and molten salts are not fully understood. In the present work, the three-dimensional (3D) morphological evolution of Ni-20Cr microwires in LiCl-KCl was studied at 500 °C under different moisture and oxygen conditions using in situ synchrotron transmission X-ray microscopy (TXM) and scanning transmission electron microscopy (STEM) techniques. No significant morphological changes were observed in Ni-20Cr microwires under vacuum conditions. However, the wires exhibited distinct morphological evolutions when exposed to molten salt containing H 2 O alone, as well as when both H 2 O and O 2 were present. Furthermore, Cr 2 O 3 precipitates were observed in the molten salt during corrosion with only H 2 O present, while Cr 6+ species were identified in the salt when O 2 was added. Further, these findings are crucial for understanding the corrosion mechanisms of molten salt with different amounts of H 2 O and O 2 contamination, providing insights for developing corrosion mitigation methods and improving the stability of containment alloys in molten salt applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

Hydrodynamic interactions in directional solidification

A binary liquid undergoes unidirectional solidification. The one-dimensional steady state is susceptible to morphological instability that causes the solid/liquid interface to change from a planar state to a cellular pattern. This paper examines the effects on this transition of volume-change convection, buoyancy-driven convection or forced flows. It emphasizes how flows alter stability limits, create scale and pattern changes in morphology, and create, through coupling, new instabilities. Emphasis is placed on the physical mechanisms of the interactions.

Davis, Stephen H.↗
DOE OSTI2024

Exploring the Effects of Intersubunit Interface Mutations on Virus-Like Particle Structure and Stability

Virus-like particles (VLPs) from bacteriophage MS2 provide a platform to study protein self-assembly and create engineered systems for drug delivery. Here, we aim to understand the impact of intersubunit interface mutations on the local and global structure and function of MS2-based VLPs. In previous work, our lab identified locally supercharged double mutants [T71K/G73R] that concentrate positive charge at capsid pores, enhancing uptake into mammalian cells. To study the effects of particle size on cellular internalization, we combined these double mutants with a single point mutation [S37P] that was previously reported to switch particle geometry from T = 3 to T = 1 icosahedral symmetry. These new variants retained their enhanced cellular uptake activity and could deliver small-molecule drugs with efficacy levels similar to our first-generation capsids. Surprisingly, these engineered triple mutants exhibit increased thermostability and unexpected geometry, producing T = 3 particles instead of the anticipated T = 1 assemblies. Transmission electron microscopy revealed various capsid assembly states, including wild-type (T = 3), T = 1, and rod-like particles, that could be accessed using different combinations of these point mutations. Molecular dynamics experiments recapitulated the structural rationale in silico for the single point mutation [S37P] forming a T = 1 virus-like particle and showed that this assembly state was not favored when combined with mutations that favor rod-like architectures. Through this work, we investigated how interdimer interface dynamics influence VLP size and morphology and how these properties affect particle function in applications such as drug delivery.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Interface morphogenesis with a deformable secondary phase in solid-state lithium batteries

Here, the complex morphological evolution of lithium metal at the solid-state electrolyte interface limits performance of solid-state batteries, leading to inhomogeneous reactions and contact loss. Inspired by biological morphogenesis, we developed an interfacial self-regulation concept in which a deformable secondary phase dynamically aggregates at the interface in response to local electro-chemo-mechanical stimuli, enhancing contact. The stripping of a lithium electrode that contains 5 to 20 mole % electrochemically inactive sodium domains causes spontaneous sodium accumulation across the interface, with the sodium deforming to attain intimate electrical contact without blocking lithium transport. This process, characterized with operando x-ray tomography and electron microscopy, mitigates voiding and improves cycling at low stack pressures. The counterintuitive strategy of adding electrochemically inactive alkali metal to improve performance demonstrates the utility of interfacial self-regulation for solid-state batteries.

Yoon, Sun Geun [Georgia Institute of Technology, A↗
DOE OSTI2024

Enhanced charge carrier extraction and transport with interface modification for efficient tin-based perovskite solar cells

Interface modification improves charge carrier extraction in tin-based perovskite solar cells. Tin-based perovskites have become the most promising non-lead perovskites due to their ideal band gap and low toxicity. Although the open circuit voltage of tin-based perovskite solar cells (TPSCs) continues to approach the theoretical value, the short-circuit current is still far from the theoretical value. Here, we describe an interface modification method by regulating the property of hole transport layer, PEDOT:PSS, which improves the surface molecular morphology and the energy level alignment of PEDOT:PSS/perovskite interface. Advanced GIWAXS and IR s-SNOM characterization are conducted to achieve multi-dimensional characterization of nanoscale surface morphology and chemical distribution of PEDOT:PSS. With the multi-attribute optimization, charge carrier extraction and non-radiative recombination are also improved. The resultant TPSCs exhibit a higher power conversion efficiency of 13.32% in compared with the control device of 10.50%, accompanied with an increase in the short-circuit current from 18.10 to 20.50 mA cm −2 and FF from 68.23% to 76.43%. This work demonstrates a reliable strategy for improving charge carrier extraction and device performance for lead-free TPSCs.

Zhao, Zhenzhu↗
NASA NTRS1990

Time development of a perturbed-spherical nucleus in a pure supercooled liquid. I - Power-law growth of morphological instabilities. II - Nonlinear development

The linear growth stage of the morphological instabilities developing at the liquid-solid interface during crystal growth from an axisymmetric spherical nucleus is analyzed. The corresponding growth rate parameters are calculated numerically, and it is shown that morphological instabilities for free growth evolve according to a power law in agreement with WKB results and contrary to an exponential law found in a quasi-stationary approximation. The time evolution of an arbitrary perturbed liquid-solid interface from a linear into the nonlinear stage is studied. The initial perturbations include the eigenfunctions for the linear problem, localized perturbations of the grain-boundary type, and a stochastic noise. It is shown that the perturbations grow and spread in a wavelike manner. The formation of a predendritic growth stage is characterized by establishment of constant values of tip radius and velocity.

Pines, V.↗