Search NASA⌕ Search

SEARCH · Search NASA

Results for “JOINTS - A M”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Keck interferometer update

The Keck Interferometer is a NASA-funded joint development between JPL and the W. M. Keck Observatory. The first phase of the project combines the two 10-m Keck Telescopes for high sensitivity near-infrared fringe visibility measurements, nulling interferometry at 10 pm to measure the quantity of exozodiacal emission around nearby stars, and differential-phase measurements to detect hot Jupiters by their direct emission. First fringes with the interferometer were obtained in March 200 1 using the two Kecks with their A 0 systems. Subsequent engineering work been focusedtoward the visibility mode in the areas of improving sensitivity, increasing automation, and adding functionality, in preparation for the high-precision modes. Recently four shared-risk teams were selected by NASA to participate in early science observations, and initial shared-risk science observations have begun.

Keck↗
DOE OSTI2026

Genetics of Flooding Tolerance in an F 2 Miscanthus sacchariflorus ssp. lutarioriparius × M. sinensis Population

Miscanthus is a warm-season, perennial grass cultivated as a feedstock for bioenergy and bioproducts. M. sacchariflorus ssp. lutarioriparius has high yield potential and is well-adapted to seasonal flooding, but little is known about the genetics of this adaptation. We conducted a quantitative trait locus (QTL) analysis on a population of 332 diploid Miscanthus ×giganteus (Mxg) F2s derived from an initial cross between diploid M. sacchariflorus ssp. lutarioriparius ‘PF30022’ and diploid M. sinensis ‘PMS-014’, followed by intermating 50 F 1 s. Using tanks in a greenhouse to assess the effects of partial submergence on actively growing plants, we compared an aerobic soil control to a 6-week flood treatment. The study's primary objectives were to (1) identify QTL for flooding tolerance in Miscanthus , (2) identify candidate genes and (3) compare ethylene response factors in Miscanthus with those in rice and Arabidopsis , sorghum and maize for binding site sequence homology and synteny, especially those associated with flooding tolerance. In total, 10 QTL and 66 candidate genes for partial submergence tolerance were identified (including many for ethylene signalling), a first report for Miscanthus . Notably, none of the Miscanthus candidates were orthologs of rice Sub1A, SK1 or SK2 , yet the ‘PF30022’ parent exhibited a snorkeling phenotype, indicating convergent evolution. This study will facilitate breeding of climate-resiliant Mxg.

abiotic stress tolerance↗
NASA NTRS1992

The comet rendezvous asteroid flyby mission

The Comet Rendezvous Asteroid Flyby (CRAF) mission was approved for a New Start by the United States Congress in 1989. CRAF will be developed in parallel with the Cassini (Saturn orbiter/Titan probe) mission. The two missions have been combined into a joint program because of the substantial cost savings (approximately $500 M, or greater than 25 percent) which can be realized by using a common spacecraft design, several identical science instruments, a single management team, and a joint ground operations and data handling system for the two missions. CRAF and Cassini will be the first users of the new Mariner Mark 2 spacecraft which has been designed to carry out the next generation of planetary missions to the outer planets and to small bodies. CRAF is a joint mission between the United States, Germany, and Italy. Each partner will provide both engineering hardware and science experiments. Cassini is a joint mission between the United States, Germany, Italy, and the European Space Agency (ESA), with ESA providing the Titan atmospheric entry probe, called Huygens.

Weissman, Paul↗
NASA NTRS1989

Minimizing distortion and internal forces in truss structures by simulated annealing

Inaccuracies in the length of members and the diameters of joints of large truss reflector backup structures may produce unacceptable levels of surface distortion and member forces. However, if the member lengths and joint diameters can be measured accurately it is possible to configure the members and joints so that root-mean-square (rms) surface error and/or rms member forces is minimized. Following Greene and Haftka (1989) it is assumed that the force vector f is linearly proportional to the member length errors e(sub M) of dimension NMEMB (the number of members) and joint errors e(sub J) of dimension NJOINT (the number of joints), and that the best-fit displacement vector d is a linear function of f. Let NNODES denote the number of positions on the surface of the truss where error influences are measured. The solution of the problem is discussed. To classify, this problem was compared to a similar combinatorial optimization problem. In particular, when only the member length errors are considered, minimizing d(sup 2)(sub rms) is equivalent to the quadratic assignment problem. The quadratic assignment problem is a well known NP-complete problem in operations research literature. Hence minimizing d(sup 2)(sub rms) is is also an NP-complete problem. The focus of the research is the development of a simulated annealing algorithm to reduce d(sup 2)(sub rms). The plausibility of this technique is its recent success on a variety of NP-complete combinatorial optimization problems including the quadratic assignment problem. A physical analogy for simulated annealing is the way liquids freeze and crystallize. All computational experiments were done on a MicroVAX. The two interchange heuristic is very fast but produces widely varying results. The two and three interchange heuristic provides less variability in the final objective function values but runs much more slowly. Simulated annealing produced the best objective function values for every starting configuration and was faster than the two and three interchange heuristic.

Kincaid, Rex K.↗
NASA NTRSDate not supplied

NASA’s NextGen Remote Sensing Instruments Have Arrived: Data Products For Studying Disease Vectors

Remote sensing can be used to measure, evaluate or estimate both the environment (state functions) and interfaces (processfunctions) defining vector habitats. The products of remote sensing can be integrated directly into the epidemiological equationsto significantly enhance our understanding of disease vector’s life cycles and habitats. The next generation of NASA’s remotesensing instruments which have become recently operational will provide a significant enhancement in our ability to studydisease vector’s life cycles and habitats. These instruments are on the International Space Station (ISS) and includeECOSTRESS, DESIS, and GEDI. ECOSTRESS is a 5 channel, thermal IR instrument with 70 m resolution and approximately1-5 day repeat cycle of day/night pairs. DESIS jointly developed by German Aerospace Center and Teledyne Brown Engineeringis a hyperspectral sensor system of 235 channels and 30 m resolution. DESIS data is only being acquired on demand. GEDI is ahigh-resolution laser ranger used for observing Earth’s forests and topography. NASA’s current ISS instrument configuration provides measurements of the critical environmental measures of environmentalstate functions important to vector & disease life cycles. Remote sensing data provide a spatial context and time series oflandscape scale process functions represented by land use mapping and measurements of ecological functions. Global publichealth is entering a new information age through the use of spatial models of disease vector/host ecologies driven by the use ofremotely sensed data to measure environmental and structural factors critical in determining disease vector habitats. In 2018, NASA initiated a new study for the Surface Biology and Geology (SBG) Designated Observable, identified in the 2018National Academies’ Decadal Survey entitled, “Thriving on Our Changing Planet: A Decadal Strategy for Earth Observationfrom Space.” (https://www.nap.edu/catalog/24938/thriving-on-our-changing-planet-a-decadal-strategy-for-earth) . The SBG isplanned to collect global remote sensing measurements using a hyperspectral spectrometer and multispectral thermal data. Thesedata sets will provide a significant enhancement in our ability to study disease vector’s life cycles and habitats globally. The 3sensors on the ISS provide precursor data to prepare the community for the application of future SBG data toward diseasestudies.

Disease Vectors↗
NASA NTRS1994

The Aluminum Falcon: a Low Cost Modern Commercial Transport

The American Institute of Aeronautics and Astronautics (AIAA) released a Request For Proposal (RFP) in the form of an undergraduate design competition for a 153 passenger jet transport with a range of 3,000 nautical miles. The primary requirement for this aircraft was low cost, both in acquisition and operation, with a technology availability date of the year 2000. This report presents the Non-Solo Design Group's response to the RFP, the Aluminum Falcon (AF-1). Non-Solo's approach to development was to take the best elements of seven individual preliminary designs, then combine and refine them. The resulting aircraft meets or exceeds all requirements of both the RFP and the Federal Aviation Administration (FAA). Highlights include a revolutionary wing planform, known as an M-wing, which offers many advantages over a conventional aft swept wing. For example, the M-wing lessens the travel in the aircraft center of gravity caused by fuel being stored in the wing. It also reduces the amount of torque imposed on the center wing box because more of the lifting load acts near the fuselage joint, rather than behind it. In essence, the M-wing offers the best of both worlds: using a forward swept wing root places the aerodynamic center of the wing further forward and allows the landing gear to be placed without the use of a yahudi. At the same time, with the outboard section swept backward the tip retains an amount of aeroelastic dampening that is lost on a completely forward swept wing. The result is a wing which has many advantages of a straight, unswept wings without the severe compressibility effects at high Mach numbers. Other highlights include judicious use of composites, giving recognition to the importance of weight and its effect on aircraft cost and performance, and an advanced passenger entertainment system which can be used as a source of revenue for the airlines. This aircraft meets the low-cost doctrine with an acquisition cost of $29 million and a direct operating cost of 3.5 cents per seat mile. The AF-1 incorporates new ideas with existing technology to result in an aircraft that will retain market viability well into the next century.

Bryant, Mark↗
DOE OSTI2020

The Habitable Zone Planet Finder Reveals a High Mass and Low Obliquity for the Young Neptune K2-25b

Using radial velocity data from the Habitable Zone Planet Finder, we have measured the mass of the Neptune-sized planet K2-25b, as well as the obliquity of its M4.5 dwarf host star in the 600–800 Myr Hyades cluster. This is one of the youngest planetary systems for which both of these quantities have been measured and one of the very few M dwarfs with a measured obliquity. Based on a joint analysis of the radial velocity data, time-series photometry from the K2 mission, and new transit light curves obtained with diffuser-assisted photometry, the planet’s radius and mass are 3.44 ± 0.12 R {sub ⊕} and 24.5{sub −5.2}{sup +5.7}M{sub ⊕}. These properties are compatible with a rocky core enshrouded by a thin hydrogen–helium atmosphere (5% by mass). We measure an orbital eccentricity of e = 0.43 ± 0.05. The sky-projected stellar obliquity is λ = 3° ± 16°, compatible with spin–orbit alignment, in contrast to other “hot Neptunes” that have been studied around older stars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

A cost and community perspective on the barriers to microbiome data reuse

Microbiome research is becoming a mature field with a wealth of data amassed from diverse ecosystems, yet the ability to fully leverage multi-omics data for reuse remains challenging. To provide a view into researchers’ behavior and attitudes towards data reuse, we surveyed over 700 microbiome researchers to evaluate data sharing and reuse challenges. We found that many researchers are impeded by difficulties with metadata records, challenges with processing and bioinformatics, and problems with data repository submissions. We also explored the cost constraints of data reuse at each step of the data reuse process to better understand “pain points” and to provide a more quantitative perspective from sixteen active researchers. The bioinformatics and data processing step was estimated to be the most time consuming, which aligns with some of the most frequently reported challenges from the community survey. From these two approaches, we present evidence-based recommendations for how to address data sharing and reuse challenges with concrete actions for future work.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1972

A fracture mechanics analysis of adhesive failure in a single lap shear joint.

Discussion of adhesive fracture of single lap shear joints in terms of a maximum stress criterion and an energy balance. The Goland and Reissner (1944) analysis is used to determine the stress distribution in the adhesive assembly, and the results obtained are introduced into an energy balance to determine the initiation of adhesive fracture. In the stress analysis the loads at the edges of the joint are first determined. This is a problem in which the deformation of the joint sheets must be taken into account and is solved by using the finite-deflection theory of cylindrically bent plates. Then the stress in the joint due to applied loads is determined. This problem is formulated as one in plane strain consisting of two rectangular sheets of equal thickness and unit width. With the aid of this stress analysis and the stresses obtained from the conditions of equilibrium the contributions to the energy change with crack length are calculated. The analysis performed is then compared with a maximum stress criterion for a lap joint.

Devries, K. L.↗
NASA NTRS1979

Quick-connect threaded attachment joint

Joint is self-aligning and tightens with only sixty-five degrees of rotation for quick connects and disconnects. Made of injection-molded plastics or cast or machined aluminum, joint can carry wires, tubes, liquids, or gases. When two parts of joint are brought together, their shapes align them. Small projections on male section and slots on female section further aid alignment; slight rotation of male form engages projections in slots. At this point, threads engage and male section is rotated until joint is fully engaged.

Lucy, M. H.↗
NASA NTRS1978

Molded composite pyrogen igniter for rocket motors

A lightweight pyrogen igniter assembly including an elongated molded plastic tube adapted to contain a pyrogen charge was designed for insertion into a rocket motor casing for ignition of the rocket motor charge. A molded plastic closure cap provided for the elongated tube includes an ignition charge for igniting the pyrogen charge and an electrically actuated ignition squib for igniting the ignition charge. The ignition charge is contained within a portion of the closure cap, and it is retained therein by a noncorrosive ignition pellet retainer or screen which is adapted to rest on a shoulder of the elongated tube when the closure cap and tube are assembled together. A circumferentially disposed metal ring is provided along the external circumference of the closure cap and is molded or captured within the plastic cap in the molding process to provide, along with O-ring seals, a leakproof rotary joint.

Heier, W. C.↗
NASA NTRS1985

Derivation and test of elevated temperature thermal-stress-free fastener concept

Future aerospace vehicles must withstand high temperatures and be able to function over a wide temperature range. New composite materials are being developed for use in designing high-temperature lightweight structures. Due to the difference between coefficients of thermal expansion for the new composite materials and conventional high-temperature metallic fasteners, innovative joining techniques are needed to produce tight joints at all temperatures without excessive thermal stresses. A thermal-stress-free fastening technique is presented that can be used to provide structurally tight joints at all temperatures even when the fastener and joined materials have different coefficients of thermal expansion. The derivation of thermal-stress-free fasteners and joint shapes is presented for a wide variety of fastener materials and materials being joined together. Approximations to the thermal-stress-free shapes that result in joints with low-thermal-stresses and that simplify the fastener/joint shape are discussed. The low-thermal-stress fastener concept is verified by thermal and shear tests in joints using oxide-dispersion-strengthened alloy fasteners in carbon-carbon material. The test results show no evidence of thermal stress damage for temperatures up to 2000 F and the resulting joints carried shear loads at room temperature typical of those for conventional joints.

Sawyer, J. W.↗
NASA NTRS1992

Hand/Eye Coordination For Fine Robotic Motion

Fine motions of robotic manipulator controlled with help of visual feedback by new method reducing position errors by order of magnitude. Robotic vision subsystem includes five cameras: three stationary ones providing wide-angle views of workspace and two mounted on wrist of auxiliary robot arm. Stereoscopic cameras on arm give close-up views of object and end effector. Cameras measure errors between commanded and actual positions and/or provide data for mapping between visual and manipulator-joint-angle coordinates.

Lokshin, Anatole M.↗
NASA NTRS1994

Correlative analysis of hard and soft x ray observations of solar flares

We have developed a promising new technique for jointly analyzing BATSE hard X-ray observations of solar flares with simultaneous soft X-ray observations. The technique is based upon a model in which electric currents and associated electric fields are responsible for the respective heating and particle acceleration that occur in solar flares. A useful by-product of this technique is the strength and evolution of the coronal electric field. The latter permits one to derive important flare parameters such as the current density, the number of current filaments composing the loop, and ultimately the hard X-ray spectrum produced by the runaway electrons. We are continuing to explore the technique by applying it to additional flares for which we have joint BATSE/Yohkoh observations. A central assumption of our analysis is the constant of proportionality alpha relating the hard X-ray flux above 50 keV and the rate of electron acceleration. For a thick-target model of hard X-ray production, it can be shown that cv is in fact related to the spectral index and low-energy cutoff of precipitating electrons. The next step in our analysis is to place observational constraints on the latter parameters using the joint BATSE/Yohkoh data.

Zarro, Dominic M.↗
NASA NTRS1995

Recent progress in the joint velocity-scalar PDF method

This viewgraph presentation discusses joint velocity-scalar PDF method; turbulent combustion modeling issues for gas turbine combustors; PDF calculations for a recirculating flow; stochastic dissipation model; joint PDF calculations for swirling flows; spray calculations; reduced kinetics/manifold methods; parallel processing; and joint PDF focus areas.

Anand, M. S.↗