Search NASA⌕ Search

SEARCH · Search NASA

Results for “Kinetic Energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Overestimated Eddy Kinetic Energy in the Eddy‐Rich Regions Simulated by Eddy‐Resolving Global Ocean–Sea Ice Models

Abstract The performance of eddy‐resolving global ocean–sea ice models in simulating mesoscale eddies is evaluated using six eddy‐resolving experiments forced by different atmospheric reanalysis products. Interestingly, eddy‐resolving ocean general circulation models (OGCMs) tend to simulate more (less) energetic eddy‐rich (eddy‐poor) regions with a smaller (larger) spatial extent than satellite observation, which finally shows that larger (smaller) mesoscale energy intensity (EI) is simulated in the eddy‐rich (eddy‐poor) regions. Quantitatively, there is an approximately 27%–60% overestimation of EI in the eddy‐rich regions, which are mainly located in the Kuroshio–Oyashio Extension, the Gulf Stream, and the Antarctic Circumpolar Currents regions, although the global mean EI is underestimated by 25%–45%. Apparently, the eddy kinetic energy in the eddy‐poor region is underestimated. Further analyses based on coherent mesoscale eddy properties show that the overestimation in the eddy‐rich regions is mainly attributed to mesoscale eddies’ intensity and is more prominent when mesoscale eddies are in their growth stage.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1973

An integral turbulent kinetic energy analysis of free shear flows

Mixing of coaxial streams is analyzed by application of integral techniques. An integrated turbulent kinetic energy (TKE) equation is solved simultaneously with the integral equations for the mean flow. Normalized TKE profile shapes are obtained from incompressible jet and shear layer experiments and are assumed to be applicable to all free turbulent flows. The shear stress at the midpoint of the mixing zone is assumed to be directly proportional to the local TKE, and dissipation is treated with a generalization of the model developed for isotropic turbulence. Although the analysis was developed for ducted flows, constant-pressure flows were approximated with the duct much larger than the jet. The axisymmetric flows under consideration were predicted with reasonable accuracy. Fairly good results were also obtained for the fully developed two-dimensional shear layers, which were computed as thin layers at the boundary of a large circular jet.

Peters, C. E.↗
DOE OSTI2023

Global cascade of kinetic energy in the ocean and the atmospheric imprint

Here, we present an estimate for the ocean's global scale transfer of kinetic energy (KE), across scales from 10 to 40,000 km. Oceanic KE transfer between gyre scales and mesoscales is induced by the atmosphere’s Hadley, Ferrel, and polar cells, and the intertropical convergence zone induces an intense downscale KE transfer. Upscale transfer peaks at 300 gigawatts across mesoscales of 120 km in size, roughly one-third the energy input by winds into the oceanic general circulation. Nearly three quarters of this “cascade” occurs south of 15°S and penetrates almost the entire water column. The mesoscale cascade has a self-similar seasonal cycle with characteristic lag time of ≈27 days per octave of length scales; transfer across 50 km peaks in spring, while transfer across 500 km peaks in summer. KE of those mesoscales follows the same cycle but peaks ≈40 days after the peak cascade, suggesting that energy transferred across a scale is primarily deposited at a scale four times larger.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2000

An Estimation of Turbulent Kinetic Energy and Energy Dissipation Rate Based on Atmospheric Boundary Layer Similarity Theory

Algorithms are developed to extract atmospheric boundary layer profiles for turbulence kinetic energy (TKE) and energy dissipation rate (EDR), with data from a meteorological tower as input. The profiles are based on similarity theory and scalings for the atmospheric boundary layer. The calculated profiles of EDR and TKE are required to match the observed values at 5 and 40 m. The algorithms are coded for operational use and yield plausible profiles over the diurnal variation of the atmospheric boundary layer.

Han, Jongil↗
DOE OSTI2023

Two-Phase Turbulent Kinetic Energy Budget Computation in Co-Current Taylor Bubble Flow

Simulation of two-phase flows is relevant for reactor design and safety at normal operation or during accident scenarios. Often, the two-phase flow is in a regime in which slugs are formed or where the flow stratifies. Modeling such situations using standard single-phase Reynolds-averaged Navier-Stokes (RANS) turbulence models fails due to an overestimation of the eddy viscosity at the resolved two-phase interface. To solve this, an ad hoc turbulence damping term has been proposed in the literature that reduces the turbulence production locally at a two-phase interface, analogously to turbulence wall functions. However, this approach must be tailored to the specific setting and does not consider physical contributions such as surface tension or flow topology. Therefore, the problem of two-phase interfacial turbulence must be studied more in-depth. In this work, we consider co-current turbulent Taylor bubble flow using high-fidelity numerical simulation. The Basilisk code is used to simulate a Taylor bubble rising in a vertical pipe. By simulating the bubble in a moving frame of reference, we may study the turbulent kinetic energy (TKE) budgets ahead of the bubble, in its wake, and across the interface. The implementation of the TKE budget computation and the underlying averaging techniques are validated for the single-phase region ahead of the Taylor bubble using reference direct numerical simulation data. The analysis of the TKE budgets in the setting of Taylor bubble flow allows for the study of how turbulence behaves due to the presence of a two-phase interface and, in turn, supports the improvement of two-phase RANS models.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

As a Matter of Tension: Kinetic Energy Spectra in MHD Turbulence

While magnetized turbulence is ubiquitous in many astrophysical and terrestrial systems, our understanding of even the simplest physical description of this phenomena, ideal magnetohydrodynamic (MHD) turbulence, remains substantially incomplete. As such, in this work we highlight the shortcomings of existing theoretical and phenomenological descriptions of MHD turbulence that focus on the joint (kinetic and magnetic) energy fluxes and spectra by demonstrating that treating these quantities separately enables fundamental insights into the dynamics of MHD turbulence. This is accomplished through the analysis of the scale-wise energy transfer over time within an implicit large eddy simulation of subsonic, super-Alfvénic MHD turbulence. Our key finding is that the kinetic energy spectrum develops a scaling of approximately k –4/3 in the stationary regime as magnetic tension mediates large-scale kinetic to magnetic energy conversion and significantly suppresses the kinetic energy cascade. This motivates a reevaluation of existing MHD turbulence theories with respect to a more differentiated modeling of the energy fluxes.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Combining 3-Momentum and Kinetic Energy on Galilei/Newton Spacetime

Without the mass-energy equivalence available on Minkowski spacetime M, it is not possible on 4-dimensional non-relativistic Galilei/Newton spacetime G to combine 3-momentum and total mass-energy in a single tensor object. However, given a fiducial frame, it is possible to combine 3-momentum and kinetic energy into a linear form (particle) or (1,1) tensor (continuum) in a manner that exhibits increased unity of classical mechanics on flat relativistic and non-relativistic spacetimes M and G. As on M, for a material continuum on G, the first law of thermodynamics can be considered a consequence of a unified dynamical law for energy-momentum rather than an independent postulate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Profiling the molecular destruction rates of temperature and humidity as well as the turbulent kinetic energy dissipation in the convective boundary layer

A simultaneous deployment of Doppler, temperature, and water-vapor lidars is able to provide profiles of molecular destruction rates and turbulent kinetic energy (TKE) dissipation in the convective boundary layer (CBL). Horizontal wind profiles and profiles of vertical wind, temperature, and moisture fluctuations are combined, and transversal temporal autocovariance functions (ACFs) are determined for deriving the dissipation and molecular destruction rates. These are fundamental loss terms in the TKE as well as the potential temperature and mixing ratio variance equations. These ACFs are fitted to their theoretical shapes and coefficients in the inertial subrange. Error bars are estimated by a propagation of noise errors. Sophisticated analyses of the ACFs are performed in order to choose the correct range of lags of the fits for fitting their theoretical shapes in the inertial subrange as well as for minimizing systematic errors due to temporal and spatial averaging and micro- and mesoscale circulations. We demonstrate that we achieve very consistent results of the derived profiles of turbulent variables regardless of whether 1 or 10 s time resolutions are used. We also show that the temporal and spatial length scales of the fluctuations in vertical wind, moisture, and potential temperature are similar with a spatial integral scale of ≈160 m at least in the mixed layer (ML). The profiles of the molecular destruction rates show a maximum in the interfacial layer (IL) and reach values of ϵ m ≃ 7 x 10 -4 g 2 kg −2 s −1 for mixing ratio and ϵ θ ≃ 1.6 x 10 -3 K 2 s −1 for potential temperature. In contrast, the maximum of the TKE dissipation is reached in the ML and amounts to ≃ 10 -2 m 2 s −3 . We also demonstrate that the vertical wind ACF coefficient k w ∝ $\overline{w'^{2}}$ and the TKE dissipation ϵ ∝ ($\overline{w'^{2}}$) 3/2 . For the molecular destruction rates, we show that ϵ m ∝ $\overline{m'^{2}}$ ($\overline{w'^{2}}$) 1/2 and ϵ θ ∝ $\overline{θ'^{2}}$ ($\overline{w'^{2}}$) 1/2 . These equations can be used for parameterizations of ϵ, ϵ m , and ϵ θ . All noise error bars are derived by error propagation and are small enough to compare the results with previous observations and large-eddy simulations. The results agree well with previous observations but show more detailed structures in the IL. Consequently, the synergy resulting from this new combination of active remote sensors enables the profiling of turbulent variables such as integral scales, variances, TKE dissipation, and the molecular destruction rates as well as deriving relationships between them. The results can be used for the parameterization of turbulent variables, TKE budget analyses, and the verification of large-eddy simulations.

dissipation rate↗
DOE OSTI2023

Dependence of the kinetic energy absorption capacity of bistable mechanical metamaterials on impactor mass and velocity

Using an alternative mechanism to dissipation or scattering, bistable structures and mechanical metamaterials have shown promise for mitigating the detrimental effects of impact by reversibly locking energy into strained material. Herein, we extend prior works on impact absorption via bistable metamaterials to computationally explore the dependence of kinetic energy transmission on the velocity and mass of the impactor, with strain rates exceeding 10 2 s –1 . We observe a large dependence on both impactor parameters, ranging from significantly better to worse performance than a comparative linear material. We then correlate the variability in performance to solitary wave formation in the system and give analytical estimates of idealized energy absorption capacity under dynamic loading. In addition, we find a significant dependence on damping accompanied by a qualitative difference in solitary wave propagation within the system. The complex dynamics revealed in this study offer potential future guidance for the application of bistable metamaterials to applications including human and engineered system shock and impact protection devices.

42 ENGINEERING↗
DOE OSTI2023

Turbulent Kinetic Energy Budgets over Gentle Topography Covered by Forests

Large-eddy simulations of flow over a “horizontally” uniform model forest are used to investigate the effects of gentle topography on the turbulent kinetic energy (TKE) budget within the canopy roughness sublayer. Despite significant differences between simulations using idealized sinusoidal topography and real topography of the Amazon forest, results indicate that the effects of topography are located predominantly in the upper canopy and above, and are mostly caused by mean advection of TKE. The “horizontally” averaged TKE budget from idealized and real gentle topographies are almost identical to that for flat terrain, including a clear inertial layer above the roughness sublayer in which shear production is balanced by local dissipation. At topography crests, where observational towers are usually located, mean vertical advection of TKE can be as important as horizontal advection. Here, we propose the use on an approximate TKE balance equation to estimate mean advection from single tower measurements, and introduce a new advection index that can be used as a proxy to quantify the importance of the topography on the TKE budget.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The Vertical Structure of Turbulence Kinetic Energy Near the Arctic Sea‐Ice Surface

Atmospheric turbulence over the Arctic sea-ice surface has been understudied due to the lack of observational data. In this study, we focus on the turbulence kinetic energy (TKE) over sea ice and distinguish its two different vertical structures, the “Surface” type and the “Elevated” type, using observations during the Multidisciplinary drifting Observatory for the Study of Arctic Climate expedition (MOSAiC). The “Surface” type has the maximum TKE near the surface (at 2 m), while the “Elevated” type has the maximum TKE at a higher level (6 m). The TKE budget analysis indicates that the “Elevated” type is caused by the increased shear production of TKE at 6 m. In addition, spectral analysis reveals that the contribution to TKE by horizontal large eddies is enhanced in the “Elevated” type. Finally, how the vertical structure of TKE affects the parameterization of turbulent momentum flux is discussed.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1991

Design of a reusable kinetic energy absorber for an astronaut safety tether to be used during extravehicular activities on the Space Station

The goal of this project is to design a reusable safety device for a waist tether which will absorb the kinetic energy of an astronaut drifting away from the Space Station. The safety device must limit the tension of the tether line in order to prevent damage to the astronaut's space suit or to the structure of the spacecraft. The tether currently used on shuttle missions must be replaced after the safety feature has been developed. A reusable tether for the Space Station would eliminate the need for replacement tethers, conserving space and mass. This report presents background information, scope and limitations, methods of research and development, alternative designs, a final design solution and its evaluation, and recommendations for further work.

Borthwick, Dawn E.↗
NASA NTRS1985

Surface-catalyzed recombination into excited electronic, vibrational, rotational, and kinetic energy states: A review

Laboratory experiments in which recombined CO, CO2, D2O, OH, N2, H2, and O2 molecules desorb from surfaces in excited internal and translational states are briefly reviewed. Unequilibrated distributions predominate from the principally catalytic metal substrates so far investigated. Mean kinetic energies have been observed up to approx. 3x, and in some cases less than, wall-thermal; the velocity distributions generally vary with emission angle, with non-Lambertian particle fluxes. The excitation state populations are found to depend on surface impurities, in an as yet unexplained way.

Kofsky, I. L.↗
DOE OSTI2022

Similarity of the turbulent kinetic energy dissipation rate distribution in the upper mixed layer of the tropical Indian Ocean

Turbulence within the upper ocean mixed layer plays a key role in various physical, biological, and chemical processes. Between September and November 2011, a dataset of 570 vertical profiles of the turbulent kinetic energy (TKE) dissipation rate, as well as conventional hydrological and meteorological data, were collected in the upper layer of the tropical Indian Ocean. These data were used to statistically analyze the vertical distribution of the TKE dissipation rate in the mixed layer. The arithmetic-mean method made the statistical TKE dissipation rate profile more scattered than the median and geometric-mean methods. The statistical TKE dissipation rate were respectively scaled by the surface buoyancy flux and the TKE dissipation rate at the mixed-layer base. It was found that the TKE dissipation rate scaled by that at the mixed-layer base exhibited better similarity characteristics than that scaled by the surface buoyancy flux, whether the stability parameter D/|L MO | was greater or less than 10, indicating that the TKE dissipation rate at the mixed-layer base is a better characteristic scaling parameter for reflecting the intrinsic structure of the TKE dissipation rate in the mixed layer, where D and L MO are respectively the mixed-layer thickness and the Monin-Obukhov length scale. The parameterization of the TKE dissipation rate at the mixed-layer base on the shear-driven dissipation rate and the surface buoyancy flux was further explored. It was found that the TKE dissipation rate at the mixed-layer base could be well fitted by a linear combination of three terms: the wind-shear-driven dissipation rate, the surface buoyancy flux, and a simple nonlinear coupling term of these two.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Can machine learning improve the model representation of turbulent kinetic energy dissipation rate in the boundary layer for complex terrain?

Current turbulence parameterizations in numerical weather prediction models at the mesoscale assume a local equilibrium between production and dissipation of turbulence. As this assumption does not hold at fine horizontal resolutions, improved ways to represent turbulent kinetic energy (TKE) dissipation rate (ϵ) are needed. Here, we use a 6-week data set of turbulence measurements from 184 sonic anemometers in complex terrain at the Perdigão field campaign to suggest improved representations of dissipation rate. First, we demonstrate that the widely used Mellor, Yamada, Nakanishi, and Niino (MYNN) parameterization of TKE dissipation rate leads to a large inaccuracy and bias in the representation of ϵ. Next, we assess the potential of machine-learning techniques to predict TKE dissipation rate from a set of atmospheric and terrain-related features. We train and test several machine-learning algorithms using the data at Perdigão, and we find that the models eliminate the bias MYNN currently shows in representing ϵ, while also reducing the average error by up to almost 40 %. Of all the variables included in the algorithms, TKE is the variable responsible for most of the variability of ϵ, and a strong positive correlation exists between the two. These results suggest further consideration of machine-learning techniques to enhance parameterizations of turbulence in numerical weather prediction models.

58 GEOSCIENCES↗
NASA NTRS1975

Large-scale kinetic energy spectra from Eulerian analysis of EOLE wind data

A data set of 56,000 winds determined from the horizontal displacements of EOLE balloons at the 200 mb level in the Southern Hemisphere during the period October 1971-February 1972 is utilized for the computation of planetary- and synoptic-scale kinetic energy space spectra. However, the random distribution of measurements in space and time presents some problems for the spectral analysis. Two different approaches are used, i.e., a harmonic analysis of daily wind values at equi-distant points obtained by space-time interpolation of the data, and a correlation method using the direct measurements. Both methods give similar results for small wavenumbers, but the second is more accurate for higher wavenumbers (k above or equal to 10). The spectra show a maximum at wavenumbers 5 and 6 due to baroclinic instability and then decrease for high wavenumbers up to wavenumber 35 (which is the limit of the analysis), according to the inverse power law k to the negative p, with p close to 3.

Desbois, M.↗
DOE OSTI2026

High Statistics Measurements of $ν_μ$ Charged-Current Single $π^{+}$ Production with Zero Pion Kinetic Energy Threshold in MINERvA

This Letter presents measurements of single-differential cross sections of $ν_μ$-induced charged-current 1 $π^{+}$ production on scintillator using the MINERvA detector at Fermilab. These measurements use traditional track-based pion reconstruction as well as pions identified solely via Michel electron decays, allowing measurement of kinetic energies from 0 to 350 MeV. In total, 91,843 events were selected with $W_{exp}$$<$ 1.4 GeV/c. Differential cross sections as a function of pion and muon kinematic variables are presented and compared with the predictions of several neutrino event generators. Overall, modern pion production models tend to agree with data at the ends of the kinematic regions probed, but are discrepant with the main regions of the phase space probed by up to 15% in muon observables and up to 20% in pion observables. No model describes any of the variables well, and this result highlights model areas that require improvement for the next generation of neutrino oscillation experiments.

Granados, E. [Guanajuato U.]↗