Search NASA⌕ Search

SEARCH · Search NASA

Results for “LAOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Tuning the conductivity threshold and carrier density of two-dimensional electron gas at oxide interfaces through interface engineering

The two-dimensional electron gas (2DEG) formed at the perovskite oxides heterostructures is of great interest because of its potential applications in oxides electronics and nanoscale multifunctional devices. A canonical example is the 2DEG at the interface between a polar oxide LaAlO{sub 3} (LAO) and non-polar SrTiO{sub 3} (STO). Here, the LAO polar oxide can be regarded as the modulating or doping layer and is expected to define the electronic properties of 2DEG at the LAO/STO interface. However, to practically implement the 2DEG in electronics and device design, desired properties such as tunable 2D carrier density are necessary. Here, we report the tuning of conductivity threshold, carrier density and electronic properties of 2DEG in LAO/STO heterostructures by insertion of a La{sub 0.5}Sr{sub 0.5}TiO{sub 3} (LSTO) layer of varying thicknesses, and thus modulating the amount of polarization of the oxide over layers. Our experimental result shows an enhancement of carrier density up to a value of about five times higher than that observed at the LAO/STO interface. A complete thickness dependent metal-insulator phase diagram is obtained by varying the thickness of LAO and LSTO providing an estimate for the critical thickness needed for the metallic phase. The observations are discussed in terms of electronic reconstruction induced by polar oxides.

36 MATERIALS SCIENCE↗

First-principles modeling of conductivity at the (001), (110), and (111) SrTiO 3 /LaAlO 3 heterointerfaces

Here, the complex polar oxide heterojunction of SrTiO 3 /LaAlO 3 (STO/LAO) is of great interest due to the emergent physical phenomena observed at the interface. STO and LAO separately are wide band-gap insulators. However, upon joining them at the 001, 110, and 111 crystallographic planes, the interface undergoes a transition to a conductive state. Although first-principles modeling of the 001 plane interface has been widely studied, there is a lack of reports regarding the 110 and 111. This paper expands the theoretical model of the STO/LAO heterointerface to the three crystallographic planes (001, 110, and 111) where the conductivity has been experimentally reported. The calculations showed that whereas at the 001 interface the conductivity appears at a critical thickness of 4 monolayers of LAO, the 110 and 111 planes have no clear critical thickness; these two interfaces were always conductive. Nevertheless, the number of conductive electrons per unit cell increases with the thickness of the LAO layer in the 110 and 111 interfaces. This is related to the energy levels downshifting due to the electrostatic potential buildup (which was in the opposite direction respect to the 001 interface), increasing the number of conductive sates below the Fermi level. Given the absence of a critical thickness and the fact that chemical intermixing and oxygen vacancies at the interface were not considered, the main mechanism responsible for the conductivity in the 110 and 111 planes was attributed to the large structure reconstruction that locally changes the energy levels at the interface causing charge transfer and accumulation at the layers close to the interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Data for Renewable Linear Alpha-Olefins by Base-Catalyzed Dehydration of Biologically-Derived Fatty Alcohols

Base catalysts were studied for the dehydration of fatty alcohols to linear alpha olefins (LAOs). For the gas phase dehydration of 1-octanol to 1-octene, 15% Cs/SiO2 catalyst was 56% selective at 10% conversion. Diluting a feed of C8, C10, and C14 fatty alcohols to 50% in undecane increased the selectivity to alpha olefins to 77–99%. 15% Cs/SiO2 was further investigated for the gas phase dehydration of a 4.2 g L−1 mixed C8–C14 fatty alcohol in tridecane feed and showed linear alpha olefin selectivities of 78–100% at initial conversions of 51–91% with the conversion lowering to 32–77% over 30 h. Catalytic activity was totally regenerated through calcination. A feed of biologically derived alcohols was produced with E. coli strain CM24 transformed with three plasmids (pBTRCk–pVHb–maACR, pACYC–pVHb–seFadBA, pTRC99A–pVHb–tdTER–fdh) which yielded a 5.5 g L−1 of C8–C14 fatty alcohol in tridecane. This biologically-derived feed was successfully dehydrated to linear alpha olefins over 15% Cs/SiO2 at selectivities of 60–100% with initial conversions of 35–75% which decreased to 22–55% over 30 h. Techno-economic analysis (TEA) of the integrated process for fatty alcohol production and subsequent dehydration to alpha olefins was conducted across the potential fermentation TRY (titer, rate, yield) landscape. Baseline fermentation performance resulted in a minimum product selling price (MPSP) double the market price for LAOs due to low titers and high costs associated with managing water and tridecane solvent flows through the system. However, targeted improvements in fermentation performance (e.g., achieving 40 g L−1 titer, 0.5 g L−1 h−1 productivity, 80% theoretical yield) can enable financially viable production of biologically derived LAOs.

Catalysis↗

Materials Data on LaGaSe2O by Materials Project

(LaO)GaSe2 crystallizes in the orthorhombic Pca2_1 space group. The structure is two-dimensional and consists of one GaSe2 sheet oriented in the (0, 0, 1) direction and one LaO sheet oriented in the (0, 0, 1) direction. In the GaSe2 sheet, Ga3+ is bonded to four Se2- atoms to form corner-sharing GaSe4 tetrahedra. There are one shorter (2.35 Å) and three longer (2.47 Å) Ga–Se bond lengths. There are two inequivalent Se2- sites. In the first Se2- site, Se2- is bonded in a distorted single-bond geometry to one Ga3+ atom. In the second Se2- site, Se2- is bonded in a trigonal non-coplanar geometry to three equivalent Ga3+ atoms. In the LaO sheet, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. There are a spread of La–O bond distances ranging from 2.41–2.44 Å. O2- is bonded to four equivalent La3+ atoms to form a mixture of distorted corner and edge-sharing OLa4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on La2SnS3O2 by Materials Project

(LaO)2SnS3 crystallizes in the orthorhombic Pnma space group. The structure is two-dimensional and consists of two SnS3 ribbons oriented in the (0, 1, 0) direction and two LaO sheets oriented in the (0, 0, 1) direction. In each SnS3 ribbon, Sn4+ is bonded to four S2- atoms to form corner-sharing SnS4 tetrahedra. There are a spread of Sn–S bond distances ranging from 2.38–2.49 Å. There are two inequivalent S2- sites. In the first S2- site, S2- is bonded in an L-shaped geometry to two equivalent Sn4+ atoms. In the second S2- site, S2- is bonded in a 1-coordinate geometry to one Sn4+ atom. In each LaO sheet, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. There are three shorter (2.41 Å) and one longer (2.42 Å) La–O bond lengths. O2- is bonded to four equivalent La3+ atoms to form a mixture of distorted edge and corner-sharing OLa4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on LaCuSO by Materials Project

(LaO)CuS is Parent of FeAs superconductors structured and crystallizes in the tetragonal P4/nmm space group. The structure is two-dimensional and consists of one CuS sheet oriented in the (0, 0, 1) direction and one LaO sheet oriented in the (0, 0, 1) direction. In the CuS sheet, Cu1+ is bonded to four equivalent S2- atoms to form a mixture of corner and edge-sharing CuS4 tetrahedra. All Cu–S bond lengths are 2.42 Å. S2- is bonded in a 4-coordinate geometry to four equivalent Cu1+ atoms. In the LaO sheet, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.36 Å. O2- is bonded to four equivalent La3+ atoms to form a mixture of corner and edge-sharing OLa4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on La3Cu4(P2O)2 by Materials Project

La(CuP)4(LaO)2 crystallizes in the tetragonal I4/mmm space group. The structure is two-dimensional and consists of two La(CuP)4 sheets oriented in the (0, 0, 1) direction and two LaO sheets oriented in the (0, 0, 1) direction. In each La(CuP)4 sheet, La3+ is bonded to eight equivalent P3- atoms to form LaP8 hexagonal bipyramids that share corners with sixteen equivalent CuP4 tetrahedra, edges with four equivalent LaP8 hexagonal bipyramids, edges with eight equivalent CuP4 tetrahedra, and faces with four equivalent LaP8 hexagonal bipyramids. All La–P bond lengths are 3.08 Å. Cu+1.75+ is bonded to four P3- atoms to form CuP4 tetrahedra that share corners with four equivalent LaP8 hexagonal bipyramids, corners with four equivalent CuP4 tetrahedra, edges with two equivalent LaP8 hexagonal bipyramids, and edges with four equivalent CuP4 tetrahedra. There are two shorter (2.35 Å) and two longer (2.47 Å) Cu–P bond lengths. There are two inequivalent P3- sites. In the first P3- site, P3- is bonded in a 9-coordinate geometry to four equivalent La3+, four equivalent Cu+1.75+, and one P3- atom. The P–P bond length is 2.26 Å. In the second P3- site, P3- is bonded in a 4-coordinate geometry to four equivalent Cu+1.75+ atoms. In each LaO sheet, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.37 Å. O2- is bonded to four equivalent La3+ atoms to form a mixture of edge and corner-sharing OLa4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on La2Cd(SeO)2 by Materials Project

(LaO)2CdSe2 is Bixbyite (Mn,Fe)2O4-derived structured and crystallizes in the tetragonal P4_2mc space group. The structure is two-dimensional and consists of two CdSe2 sheets oriented in the (0, 0, 1) direction and two LaO sheets oriented in the (0, 0, 1) direction. In each CdSe2 sheet, Cd2+ is bonded to four equivalent Se2- atoms to form corner-sharing CdSe4 tetrahedra. All Cd–Se bond lengths are 2.70 Å. Se2- is bonded in a 2-coordinate geometry to two equivalent Cd2+ atoms. In each LaO sheet, there are two inequivalent La3+ sites. In the first La3+ site, La3+ is bonded in a 4-coordinate geometry to four O2- atoms. All La–O bond lengths are 2.38 Å. In the second La3+ site, La3+ is bonded in a 4-coordinate geometry to four O2- atoms. There are two shorter (2.38 Å) and two longer (2.39 Å) La–O bond lengths. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded to four La3+ atoms to form a mixture of edge and corner-sharing OLa4 tetrahedra. In the second O2- site, O2- is bonded to four La3+ atoms to form a mixture of edge and corner-sharing OLa4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on La4Cu4Se3SO4 by Materials Project

(LaO)4Cu4Se3S crystallizes in the tetragonal P4mm space group. The structure is two-dimensional and consists of one Cu4Se3S sheet oriented in the (0, 0, 1) direction and one LaO sheet oriented in the (0, 0, 1) direction. In the Cu4Se3S sheet, Cu1+ is bonded to three Se2- and one S2- atom to form a mixture of edge and corner-sharing CuSe3S tetrahedra. There are one shorter (2.52 Å) and two longer (2.53 Å) Cu–Se bond lengths. The Cu–S bond length is 2.42 Å. There are two inequivalent Se2- sites. In the first Se2- site, Se2- is bonded in a 4-coordinate geometry to four equivalent Cu1+ atoms. In the second Se2- site, Se2- is bonded in a 4-coordinate geometry to four equivalent Cu1+ atoms. S2- is bonded in a 4-coordinate geometry to four equivalent Cu1+ atoms. In the LaO sheet, there are three inequivalent La3+ sites. In the first La3+ site, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.38 Å. In the second La3+ site, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.39 Å. In the third La3+ site, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.38 Å. O2- is bonded to four La3+ atoms to form a mixture of edge and corner-sharing OLa4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on La4Cu4SeS3O4 by Materials Project

(LaO)4Cu4SeS3 crystallizes in the tetragonal P4mm space group. The structure is two-dimensional and consists of one Cu4SeS3 sheet oriented in the (0, 0, 1) direction and one LaO sheet oriented in the (0, 0, 1) direction. In the Cu4SeS3 sheet, Cu1+ is bonded to one Se2- and three S2- atoms to form a mixture of edge and corner-sharing CuSeS3 tetrahedra. The Cu–Se bond length is 2.50 Å. All Cu–S bond lengths are 2.42 Å. Se2- is bonded in a 12-coordinate geometry to four equivalent Cu1+ atoms. There are two inequivalent S2- sites. In the first S2- site, S2- is bonded in a 4-coordinate geometry to four equivalent Cu1+ atoms. In the second S2- site, S2- is bonded in a 4-coordinate geometry to four equivalent Cu1+ atoms. In the LaO sheet, there are three inequivalent La3+ sites. In the first La3+ site, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.37 Å. In the second La3+ site, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.36 Å. In the third La3+ site, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.37 Å. O2- is bonded to four La3+ atoms to form a mixture of edge and corner-sharing OLa4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on La2Zn(SeO)2 by Materials Project

(LaO)2ZnSe2 crystallizes in the orthorhombic Cmce space group. The structure is two-dimensional and consists of two LaO sheets oriented in the (1, 0, 0) direction and two ZnSe2 sheets oriented in the (1, 0, 0) direction. In each LaO sheet, there are three inequivalent La3+ sites. In the first La3+ site, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. There are two shorter (2.38 Å) and two longer (2.39 Å) La–O bond lengths. In the second La3+ site, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. There are two shorter (2.38 Å) and two longer (2.40 Å) La–O bond lengths. In the third La3+ site, La3+ is bonded in a 4-coordinate geometry to four O2- atoms. There are a spread of La–O bond distances ranging from 2.35–2.41 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded to four La3+ atoms to form a mixture of edge and corner-sharing OLa4 tetrahedra. In the second O2- site, O2- is bonded to four La3+ atoms to form a mixture of edge and corner-sharing OLa4 tetrahedra. In each ZnSe2 sheet, there are two inequivalent Zn2+ sites. In the first Zn2+ site, Zn2+ is bonded to four Se2- atoms to form a mixture of edge and corner-sharing ZnSe4 tetrahedra. There are two shorter (2.50 Å) and two longer (2.53 Å) Zn–Se bond lengths. In the second Zn2+ site, Zn2+ is bonded to four Se2- atoms to form corner-sharing ZnSe4 tetrahedra. All Zn–Se bond lengths are 2.51 Å. There are three inequivalent Se2- sites. In the first Se2- site, Se2- is bonded in a distorted water-like geometry to two equivalent Zn2+ atoms. In the second Se2- site, Se2- is bonded in a 2-coordinate geometry to two equivalent Zn2+ atoms. In the third Se2- site, Se2- is bonded in a distorted water-like geometry to two Zn2+ atoms.

36 MATERIALS SCIENCE↗

Assessment of the Biomass Productivity Decline in the Lower Mekong Basin

This study aimed to delineate the geographic hotspots of negative trends in biomass productivity in the Lower Mekong Basin countries (Vietnam, Cambodia, Laos, and Thailand) and identify correlated regional environmental and anthropogenic factors. A long-term time-series (1982–2015) of Normalized Difference Vegetation Index at a resolution of approximately 9.16 km x 9.16 km was used to specify the areas with significant decline or increase in productivity. The relationships between vegetation changes and land attributes, such as climate, population density, soil/terrain conditions, and land-cover types, were examined. Rainfall time-series maps were used to identify areas that might have been affected by land degradation from those correlated with rainfall. Most of the detected potentially degraded areas were found in Cambodia, the Northwest and the Highland of Vietnam, the Northern Mountains of Thailand and Laos, and the mountainous border between Laos, Vietnam, and Cambodia. About 15% of the total land area of these four countries experienced a reduction in biomass productivity during the 34-year study period. The map of hotspots of changes in productivity can be used to direct further studies, including those at finer spatial resolution that may support policy makers and researchers in targeting the strategies for combating land degradation.

land degradation↗

Electronic structure of lanthanum copper oxychalcogenides LaCuOCh (Ch=S, Se, Te) by X-ray photoelectron and absorption spectroscopy

X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge spectroscopy (XANES) have been applied to examine the electronic structures of lanthanum copper oxychalcogenides LaCuOCh (Ch=S, Se, Te), whose structure has been conventionally viewed as consisting of nominally isolated [LaO] and [CuCh] layers. However, there is evidence for weak La-Ch interactions between these layers, as seen in small changes in the satellite intensity of the La 3d XPS spectra as the chalcogen is changed and as supported by band structure calculations. The O 1s and Cu 2p XPS spectra are insensitive to chalcogen substitution. Lineshapes in the Cu 2p XPS spectra and fine-structure in the Cu L- and M-edge XANES spectra support the presence of Cu{sup +} species. The Ch XPS spectra show negative BE shifts relative to the elemental chalcogen, indicative of anionic species; these shifts correlate well with greater difference in electronegativity between the Cu and Ch atoms, provided that an intermediate electronegativity is chosen for Se. - Graphical abstract: The presence of anionic chalcogen atoms in LaCuOCh is supported by the Ch binding energies, which undergo negative shifts proportional to the polarity of the Cu-Ch bonds. Highlights: > La 3d XPS confirms La-Ch interlayer interactions between [LaO] and [CuCh] layers. > O 1s and Cu 2p XPS are insensitive to chalcogen substitution. > Cu XANES spectra support the presence of Cu{sup +} species. > Negative shifts in Ch binding energies imply anionic chalcogen atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of LaFeO 3 Surface Termination on Water Reactivity

The polarity of oxide surfaces can dramatically impact their surface reactivity, in particular with polar molecules such as water. The surface species that result from this interaction change the oxide electronic structure and chemical reactivity in applications such as photoelectrochemistry, but are challenging to probe experimentally with atomic-scale understanding. Here we report a detailed study of the surface chemistry and electronic structure of the perovskite LaFeO3 in humid conditions using ambient pressure X-ray photoelectron spectroscopy. Comparing the two possible terminations of the polar (001)-oriented surface, we find that the LaO surface is more reactive toward water, forming hydroxyl species and adsorbing molecular water at lower relative humidity than its FeO2-terminated counterpart. Our results demonstrate how the termination of a complex oxide can dramatically impact its reactivity, providing insight into the design of catalyst materials.

Environmental Molecular Sciences Laboratory↗

Electrochromic Properties of Perovskite NdNiO 3 Thin Films for Smart Windows

Semiconductors with electrically tunable band gaps are of great interest in controlling transparency to electromagnetic radiation. Thin films of perovskite nickelate NdNiO 3 (NNO), a class of correlated oxides, were deposited on single-crystal (LaAlO 3 (LAO)) and polycrystalline (fluorine-doped tin oxide-coated glass (FTO)) substrates by magnetron sputtering, chemical solution deposition (CSD), and atomic layer deposition (ALD). Their electrochromic behaviors were investigated using a three-electrode setup in basic (KOH solution, pH = 12) electrolyte. During bleaching/coloration process, the proton intercalation/deintercalation and simultaneous electron compensation in the NNO lattice under electrical bias led to crossover of the material between the pristine-conducting phase (Ni 3+ ) and the strongly correlated insulating phase (Ni 2+ ), which serves as the working principle for electrochromic (tunable opacity in the visible range) behavior. Cyclic voltammetry (CV) scans demonstrate that NNO films are electrochemically stable in basic solutions for all three film deposition methods explored here. CV scans at varying rates enabled the extraction of diffusion coefficient of protons in thin film NNO, which is similar to 10 –7 cm 2 s –1 among all films studied. Large light transmittance modulation by bleaching and coloration was observed on films grown on both LAO and FTO substrates, suggesting its potential as an electrochromic material candidate for smart windows and optical shutter applications. Here, porous NNO films obtained by chemical solution deposition tend to demonstrate stronger electrochromic activity than dense films grown by sputtering or ALD.

36 MATERIALS SCIENCE↗

Tunable one-dimensional electron gas carrier densities at nanostructured oxide interfaces

The emergence of two-dimensional metallic states at the LaAlO 3 /SrTiO 3 (LAO/STO) heterostructure interface is known to occur at a critical thickness of four LAO over layers. This insulator-to-metal transition can be explained through the polar catastrophe mechanism arising from the divergence of the electrostatic potential at the LAO surface. Here, we demonstrate that nanostructuring can be effective in reducing or eliminating this critical thickness. Employing a modified polar catastrophe" model, we demonstrate that the nanowire heterostructure electrostatic potential diverges more rapidly as a function of layer thickness than in a regular heterostructure. Our first principles calculations indicate that for nanowire heterostructure geometries a one-dimensional electron gas (1DEG) can be induced, consistent with recent experimental observations of 1D conductivity in LAO/STO steps. Similar to LAO/STO 2DEGs, we predict that the 1D charge density will decay laterally within a few unit cells away from the nanowire; thus providing a mechanism for tuning the carrier behavior between 1D and 2D conductivity. Furthermore, our work provides insight into the creation and manipulation of charge density at an oxide heterostructure interface and therefore may be beneficial for future nanoelectronic devices and for the engineering of novel quantum phases.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Metal-insulator transition and electrically driven memristive characteristics of SmNiO{sub 3} thin films

The correlated oxide SmNiO{sub 3} (SNO) exhibits an insulator to metal transition (MIT) at 130 deg. C in bulk form. We report on synthesis and electron transport in SNO films deposited on LaAlO{sub 3} (LAO) and Si single crystals. X-ray diffraction studies show that compressively strained single-phase SNO grows epitaxially on LAO while on Si, mixed oxide phases are observed. MIT is observed in resistance-temperature measurements in films grown on both substrates, with charge transport in-plane for LAO/SNO films and out-of-plane for Si/SNO films. Electrically driven memristive behavior is realized in LAO/SNO films, suggesting that SNO may be relevant for neuromorphic devices.

36 MATERIALS SCIENCE↗

Epitaxy, strain, and composition effects on metal-insulator transition characteristics of SmNiO{sub 3} thin films

SmNiO{sub 3} (SNO) thin films were deposited on LaAlO{sub 3} (LAO), SrTiO{sub 3}, SrLaAlO{sub 4}, Si, and Al{sub 2}O{sub 3} (sapphire) substrates by RF magnetron sputtering and studies were conducted to understand how film structure and composition influence the insulator-metal transition properties. It is observed that the compressive strain induces the insulator to metal transition (MIT), while tensile strain suppresses it. In the case of non-epitaxial films, semiconducting behavior is obtained on sapphire over a broad temperature range, while on heavily-doped Si substrate; an MIT is seen in out-of-plane resistance measurement. In addition, thickness dependence on the resistance behavior and nickel oxidation state has been examined for epitaxial SNO films on LAO substrates. Fine control of the MIT by modifications to the mismatch strain and thickness provides insights to enhance the performance and the functionality of these films for emerging electron devices.

36 MATERIALS SCIENCE↗