Search NASA⌕ Search

SEARCH · Search NASA

Results for “LSP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

3D PRINTED LAYER OF POLYANILINE-BASED CONDUCTIVE POLYMER FOR LIGHTNING STRIKE PROTECTION OF CFRPS

Manufacturing of Carbon Fiber Reinforced Plastics (CFRPs) using additive manufacturing (AM), or 3D printing, has gained popularity in recent years. It is believed that the AM industry has the potential to manufacture CFRP parts in a faster, easier and more economical way. Lightning strike damage to CFRP parts is not rare; therefore, additional lightning strike protection (LSP) technologies are applied on top of CFRP structures. However, there is no report of manufacturing lightning strike protection (LSP) technologies using the AM process. In the present work, the authors applied an electrically conductive layer via additive manufacturing. The material of the electrically conductive layer was a Polyaniline (PANI)-filled thermoset composite. This layer of PANI was deposited on top of the CFRP panels. The PANI-coated CFRP panels were tested against a simulated lightning strike made of a continuous waveform with component A (100 kA), component B (2 kA) and component C (470 A). The highly conductive PANI-layer worked as a capable Faraday cage to safely dissipate the lightning current. In PANI-based LSP, direct contact between PANI chains dominated the conduction behavior, which proved to be a highly efficient way to reduce resistive heating from the incident current. However, poor adhesion between the printed layer and the substrate structure needs to be improved in the future. The results from the thermal camera and the high-speed camera images showed an effective current dissipation through the printed layers. Non-destructive ultrasonic imaging was done to confirm the direct lightning damages to samples. The present work shows that a non-metallic conductive layer can be applied as an LSP of CFRP structures via an additive manufacturing technique.

Kumar, Vipin↗

Enhancing corrosion resistance of lightweight metal alloys through laser shock peening

In this study, we investigated the effects of laser shock peening (LSP) on the corrosion resistance of lightweight metal alloys, specifically AA6061 and AZ31. LSP was performed underwater, using a nanosecond pulse laser and without using a protective coating or layer on the workpiece. The corrosion behaviors of these alloys were analyzed through electrochemical tests, including open circuit potential, electrochemical impedance spectroscopy, and potentiodynamic polarization measurements. The results demonstrated that LSP significantly improved the polarization resistance, and higher laser power intensities led to increased corrosion resistance and reduced corrosion rates. This enhancement in anti-corrosion performance is attributed to the formation of a protective oxide layer on the surface, acting as a barrier against corrosion. In conclusion, the findings underscore the potential of laser surface treatment as a viable technique for enhancing the corrosion resistance of lightweight metal alloys.

36 MATERIALS SCIENCE↗

Identifying sneutrino dark matter: Interplay between the LHC and direct search

Under R parity, the lightest supersymmetric particle (LSP) is stable and may serve as a good dark matter candidate. The R parity can be naturally introduced with a gauge origin at the TeV scale. We go over why a TeV scale B-L gauge extension of the minimal supersymmetric standard model is one of the most natural, if not demanded, low energy supersymmetric models. In the presence of a TeV scale Abelian gauge symmetry, the (predominantly) right-handed sneutrino LSP can be a good dark matter candidate. Its identification at the LHC is challenging because it does not carry any standard model charge. We show how we can use the correlation between the LHC experiments (dilepton resonance signals) and the direct dark matter search experiments (such as CDMS and XENON) to identify the right-handed sneutrino LSP dark matter in the B-L extended minimal supersymmetric standard model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sensitivity of terrestrial precipitation trends to the structural evolution of sea surface temperatures

Abstract Pronounced intermodel differences in the projected response of land surface precipitation (LSP) to future anthropogenic forcing remain in the Coupled Model Intercomparison Project Phase 5 model integrations. A large fraction of the intermodel spread in projected LSP trends is demonstrated here to be associated with systematic differences in simulated sea surface temperature (SST) trends, especially the representation of changes in (i) the interhemispheric SST gradient and (ii) the tropical Pacific SSTs. By contrast, intermodel differences in global mean SST, representative of differing global climate sensitivities, exert limited systematic influence on LSP patterns. These results highlight the importance to regional terrestrial precipitation changes of properly simulating the spatial distribution of large‐scale, remote changes as reflected in the SST response to increasing greenhouse gases. Moreover, they provide guidance regarding which region‐specific precipitation projections may be potentially better constrained for use in climate change impact assessments.

Anderson, Bruce T.↗

Lightning Strike Damage of CF/Epoxy Composite Laminates with Conductive Polymer Layers

Carbon fiber reinforced plastics (CFRPs) are prone to severe damages by lightning strikes due to their low electrical conductivity. Current lightning strike protection (LSP) technology generally consists of metal foils/films on the surface of composite airframe structures. The present work aims to introduce all polymeric conductive layer for LSP of CFRP structures. Intrinsic conductive polymer i.e. Polyaniline (PANI) is used to make a thermosetting polymer mixture. CFRPs coated with this electrically conductive, all polymeric layer was tested against simulated lighting strike. It has been shown that PANI-LSP specimens dissipated the lightning current effectively and provided enough residual mechanical properties of CFRPs.

Yokozeki, Tomohiro↗

Search for direct pair production of sleptons and charginos decaying to two leptons and neutralinos with mass splittings near the $W$-boson mass in $\sqrt{s}$ = 13 TeV pp collisions with the ATLAS detector

A search for the electroweak production of pairs of charged sleptons or charginos decaying into two-lepton final states with missing transverse momentum is presented. Two simplified models of R-parity-conserving supersymmetry are considered: direct pair-production of sleptons ($\sim\atop{\ell}$$\sim\atop{\ell}$), with each decaying into a charged lepton and a $\sim\atop{\chi}$ $^{0}_{1}$ neutralino, and direct pair-production of the lightest charginos ($\sim\atop{\chi}$ $^{±}_{1}$ $\sim\atop{\chi}$ $^{∓}_{1}$), with each decaying into a W-boson and a $\sim\atop{\chi}$ $^{0}_{1}$. The lightest neutralino ($\sim\atop{\chi}$ $^{0}_{1}$) is assumed to be the lightest supersymmetric particle (LSP). The analyses target the experimentally challenging mass regions where $m$($\sim\atop{\ell}$) - $m$($\sim\atop{\chi}$ $^{0}_{1}$) and ($m$$\sim\atop{\chi}$ $^{±}_{1}$) – )$m$$\sim\atop{\chi}$ $^{0}_{1}$) are close to the W-boson mass (‘moderately compressed’ regions). The search uses 139 fb –1 of $\sqrt{s}$ = 13 TeV proton-proton collisions recorded by the ATLAS detector at the Large Hadron Collider. No significant excesses over the expected background are observed. Exclusion limits on the simplified models under study are reported in the ($\sim\atop{\ell}$, $\sim\atop{\chi}$ $^{0}_{1}$) and ($\sim\atop{\chi}$ $^{±}_{1}$, $\sim\atop{\chi}$ $^{0}_{1}$) mass planes at 95% confidence level (CL). Sleptons with masses up to 150 GeV are excluded at 95% CL for the case of a mass-splitting between sleptons and the LSP of 50 GeV. Chargino masses up to 140 GeV are excluded at 95% CL for the case of a mass-splitting between the chargino and the LSP down to about 100 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Gluino coannihilation revisited

In this study, some variants of the MSSM feature a strip in parameter space where the lightest neutralino χ is identified as the lightest supersymmetric particle (LSP), the gluino g ~ is the next-to-lightest supersymmetric particle (NLSP) and is nearly degenerate with χ, and the relic cold dark matter density is brought into the range allowed by astrophysics and cosmology by coannihilation with the gluino NLSP. We calculate the relic density along this gluino coannihilation strip in the MSSM, including the effects of gluino-gluino bound states and initial-state Sommerfeld enhancement, and taking into account the decoupling of the gluino and LSP densities that occurs for large values of the squark mass m q ~ . We find that bound-state effects can increase the maximum m χ for which the relic cold dark matter density lies within the range favoured by astrophysics and cosmology by as much as ~50% if m q ~ /m g ~ =1.1 , and that the LSP may weigh up to ~8 TeV for a wide range of m q ~ /m g ~ ≲100 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for supersymmetry in final states with a single electron or muon using angular correlations and heavy-object identification in proton-proton collisions at $ \sqrt{s} $ = 13 TeV

A search for supersymmetry is presented in events with a single charged lepton, electron or muon, and multiple hadronic jets. The data correspond to an integrated luminosity of 138 fb –1 of proton-proton collisions at a center-of-mass energy of 13 TeV, recorded by the CMS experiment at the CERN LHC. The search targets gluino pair production, where the gluinos decay into final states with the lightest supersymmetric particle (LSP) and either a top quark-antiquark ($\text{t}\bar{\text{t}}$ pair, or a light-flavor quark-antiquark ($\text{q}\bar{\text{q}}$ pair and a virtual or on-shell W boson. The main backgrounds, $\text{t}\bar{\text{t}}$ pair and W+jets production, are suppressed by requirements on the azimuthal angle between the momenta of the lepton and of its reconstructed parent W boson candidate, and by top quark and W boson identification based on a machine-learning technique. The number of observed events is consistent with the expectations from standard model processes. Limits are evaluated on supersymmetric particle masses in the context of two simplified models of gluino pair production. Exclusions for gluino masses reach up to 2120 (2050) GeV at 95% confidence level for a model with gluino decay to a $\text{t}\bar{\text{t}}$ pair (a $\text{q}\bar{\text{q}}$ pair and a W boson) and the LSP. For the same models, limits on the mass of the LSP reach up to 1250 (1070) GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for chargino-neutralino production in events with Higgs and W bosons using 137 fb$^{−1}$ of proton-proton collisions at $ \sqrt{s} $ = 13 TeV

A search for electroweak production of supersymmetric (SUSY) particles in final states with one lepton, a Higgs boson decaying to a pair of bottom quarks, and large missing transverse momentum is presented. The search uses data from proton-proton collisions at a center-of-mass energy of 13 TeV collected using the CMS detector at the LHC, corresponding to an integrated luminosity of 137 fb$^{−1}$. The observed yields are consistent with backgrounds expected from the standard model. The results are interpreted in the context of a simplified SUSY model of chargino-neutralino production, with the chargino decaying to a W boson and the lightest SUSY particle (LSP) and the neutralino decaying to a Higgs boson and the LSP. Charginos and neutralinos with masses up to 820 GeV are excluded at 95% confidence level when the LSP mass is small, and LSPs with mass up to 350 GeV are excluded when the masses of the chargino and neutralino are approximately 700 GeV.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Formation of omega phase induced by laser shock peening in Ti-17 alloy

Synchrotron-based high-energy X-ray diffraction and transmission electron microscopy were used to study the in-depth compressive residual strains and microstructure evolution in Ti-17 alloy subjected to two-sided laser shock peening (LSP). A noticeable difference was observed in the lattice strains and extents of peak broadening on the two sides of the sample. The compressive residual strain was smaller and the peak broadening was more pronounced on the bottom surface in comparison to the top surface. This is due to the β → ω phase transformation induced by LSP on the bottom surface. It was determined that the ω phase with fine particle morphology and incommensurate structure is located mainly in the 15 μm-thick layer under the bottom surface. The formation of the LSP-induced ω phase on the bottom surface can be attributed to the adiabatic increase in temperature due to the higher shock peak pressure on the bottom surface, and can result in the relaxation of the accumulated residual compressive strain in the original phases.

36 MATERIALS SCIENCE↗

Quantification of room temperature strengthening of laser shock peened Ni-based superalloy using synchrotron microdiffraction

Laser shock peening (LSP), a surface modification technique, is promising to enhance the strength and wear resistance for Ni-based superalloys. To understand the strengthening mechanism in a laser shock peened Ni-based superalloy DZ417G, we utilize synchrotron poly- and monochromatic X-ray microdiffraction, as well as electron microscopy and microhardness to quantify the local microstructures and mechanical properties at various depths. In the 1.2-mm-deep hardened layer, the microhardness increases monotonically by ~50% from the unaffected interior to the surface. Quantitative microdiffraction analysis shows that large amounts of dislocations are introduced by LSP. High densities of 7.1 × 10 15 m -2 and 11.8 × 10 15 m -2 are seen close to the peened surface for the γ- and γ'-phases, respectively, which are 5 and 20 times of those in the unaffected region. Different gradients of dislocation density are observed for the two phases from interior to surface, and their combined effect accounts well for the hardness increment. Due to the unaltered γ'-precipitates and chemical composition in the LSP affected zone, the large density of dislocations dominates the observed strengthening. Combined poly- and monochromatic X-ray microdiffraction allows quantifying the local microstructures of plastic deformation over a large sampling scale that can hardly be achieved using other materials characterization techniques.

36 MATERIALS SCIENCE↗

The in-depth residual strain heterogeneities due to an indentation and a laser shock peening for Ti-6Al-4V titanium alloy

In this paper, heterogeneity of the through-thickness residual strain due to the laser shock peening (LSP) in comparison with that due to the indentation was studied in Ti-6Al-4V alloy samples. The latter is almost a quasi-static process while the former features extremely high strain-rate deformation. The synchrotron based high-energy X-ray diffraction was employed to investigate the through-thickness residual strain distribution. The studied two samples after the two processing procedures share the following features: (i) the pressure affected depths are both ~2 mm and (ii) the largest magnitudes of the compressive residual strains parallel to the surface are ~4,000 με. However, the pit depth for the indentation sample is ~9 times larger than that for the LSP. The position featuring the largest magnitude of the compressive residual strain is in the sub-surface for the indentation while it is in the surface for the LSP. Results of the elastic-visco-plastic finite element simulation for the indentation indicate that the position featuring the maximum accumulative plastic shear as defined in this paper corresponds to the location with the largest magnitude of compressive residual strain. To validate this finding, full width at half maximum (FWHM) of the X-ray diffraction profile, which is proportional to the level of the plastic deformation, is also studied. Finally, it is found that positions with the largest FWHM indeed correspond to the largest magnitude of compressive residual strain for both tests.

36 MATERIALS SCIENCE↗

A high spatial resolution land surface phenology dataset for AmeriFlux and NEON sites

Abstract Vegetation phenology is a key control on water, energy, and carbon fluxes in terrestrial ecosystems. Because vegetation canopies are heterogeneous, spatially explicit information related to seasonality in vegetation activity provides valuable information for studies that use eddy covariance measurements to study ecosystem function and land-atmosphere interactions. Here we present a land surface phenology (LSP) dataset derived at 3 m spatial resolution from PlanetScope imagery across a range of plant functional types and climates in North America. The dataset provides spatially explicit information related to the timing of phenophase changes such as the start, peak, and end of vegetation activity, along with vegetation index metrics and associated quality assurance flags for the growing seasons of 2017–2021 for 10 × 10 km windows centred over 104 eddy covariance towers at AmeriFlux and National Ecological Observatory Network (NEON) sites. These LSP data can be used to analyse processes controlling the seasonality of ecosystem-scale carbon, water, and energy fluxes, to evaluate predictions from land surface models, and to assess satellite-based LSP products.

59 BASIC BIOLOGICAL SCIENCES↗

Search for Stop Pair Production at the LHC using the CMS Detector

A search for pair production of top squark events in proton-proton collisions at a center-of-mass energy of p s = 8 TeV is performed in a sample with a single isolated electron or muon, jets, large missing transverse energy and large transverse mass. The data sample used corresponds to an integrated luminosity of 19 : 5 fb 1 collected by the CMS experiment. No significant excess in data is observed above the expectation from standard model processes. In the context of supersymmetric models with pair production of top squarks decaying to either a top quark and the lightest supersymmetric particle (LSP) or a bottom quark and a chargino that subsequently decays to a W boson and the LSP, the results probe top squarks with masses up to about 650 GeV for LSP masses up to about 250 GeV

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nanospherical-lens lithographical Ag nanodisk arrays embedded in p-GaN for localized surface plasmon-enhanced blue light emitting diodes

Large-scale Ag nanodisks (NDs) arrays fabricated using nanospherical-lens lithography (NLL) are embedded in p-GaN layer of an InGaN/GaN light-emitting diode (LED) for generating localized surface plasmon (LSP) coupling with the radiating dipoles in the quantum-well (QWs). Based on the Ag NDs with the controlled surface coverage, LSP leads to the improved crystalline quality of regrowth p-GaN, increased photoluminescence (PL) intensity, reduced PL decay time, and enhanced output power of LED. Compared with the LED without Ag NDs, the optical output power at a current of 350 mA of the LSP-enhanced LEDs with Ag NDs having a distance of 20 and 35 nm to QWs is increased by 26.7% and 31.1%, respectively. The electrical characteristics and optical properties of LEDs with embedded Ag NPs are dependent on the distance of between Ag NPs and QWs region. The LED with Ag NDs array structure is also found to exhibit reduced emission divergence, compared to that without Ag NDs.

36 MATERIALS SCIENCE↗

Angular dependence of optical modes in metal-insulator-metal coupled quantum well infrared photodetector

We report the dependence of the near-field optical modes in metal-insulator-metal quantum well infrared photodetector (MIM-QWIP) on the incident angles. Three optical modes are observed and attributed to the 2nd- and the 3rd-order surface plasmon polariton (SPP) modes and the localized surface polariton (LSP) mode. In addition to the observation of a responsivity enhancement of 14 times by the LSP mode, the varying pattern of the three modes against the incident angle are revealed, in which the LSP mode is fixed while the 2nd SPP mode splits into two branches and the 3rd SPP mode red-shifts. The detailed mechanisms are analyzed and numerically simulated. The results fit the experiments very well, demonstrating the wavevector coupling effect between the incident light and the metal gratings on the SPP modes. Our work will pave the way to fully understanding the influence of incident angles on a detector’s response for applying the MIM-QWIP to focal plane arrays.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

TESTING A PULSATING BINARY MODEL FOR LONG SECONDARY PERIODS IN RED VARIABLES

The origin of the long secondary periods (LSPs) in red variables remains a mystery until now, although many models exist. The light curves of some LSP stars mimic an eclipsing binary with a pulsating red giant component. To test this hypothesis, the observational data of two LSP variable red giants, 77.7795.29 and 77.8031.42, discovered by the MACHO project from the Large Magellanic Cloud, are collected and analyzed. The probable eclipsing features of the light curves are simulated by the Wilson-Devinney method. The simulation yields a contact and a semidetached geometry for the two systems, respectively. In addition, the pulsation constant of the main pulsating component in each binary system is derived. By combining the results of the binary model and the pulsation component, we investigate the feasibility of the pulsating binary model. It is found that the radial velocity curve expected from the binary model has a much larger amplitude than the observed one and a period double the observed one. Furthermore, the masses of the components based on the density derived from the binary orbit solution are too low to be compatible with both the evolutionary stage and the high luminosity. Although the pulsation mode identified by the pulsation constant which is dependent on the density from the binary model is consistent with the first or second overtone radial pulsation, we conclude that the pulsating binary model is a defective model for the LSP.

79 ASTRONOMY AND ASTROPHYSICS↗

EVIDENCE FOR MASS EJECTION ASSOCIATED WITH LONG SECONDARY PERIODS IN RED GIANTS

Approximately 30% of luminous red giants exhibit a long secondary period (LSP) of variation in their light curves in addition to a shorter primary period of oscillation. The cause of the LSP has so far defied explanation: leading possibilities are binarity and a nonradial mode of oscillation. Here, large samples of red giants in the Large Magellanic Cloud both with and without LSPs are examined for evidence of an 8 or 24 mum mid-IR excess caused by circumstellar dust. It is found that stars with LSPs show a significant mid-IR excess compared to stars without LSPs. Furthermore, the near-IR J - K color seems unaffected by the presence of the 24 mum excess. These findings indicate that LSPs cause mass ejection from red giants and that the lost mass and circumstellar dust is most likely in either a clumpy or a disk-like configuration. The underlying cause of the LSP and the mass ejection remains unknown.

79 ASTRONOMY AND ASTROPHYSICS↗