Search NASA⌕ Search

SEARCH · Search NASA

Results for “Level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Fission Cross Section and Fission Yield Calculation of Am-241 (n,f), Th-232 (n,f), and U-235 (n,f) using TALYS

Nuclear data evaluation for fission cross section and fission yield had been performed by many investigators using different model approximation theoretically. These models are encapsulated and implemented into computer codes to perform more robust nuclear reaction data calculations. TALYS is one of most successful nuclear reaction codes that used to determine fission cross section and fission yield. In this paper, TALYS was used to calculate some fission reaction including Am-241 (n,f), Th-232 (n,f), and U-235 (n,f). These calculations are performed using different set of reaction mechanism and optical model parameter adjustment, such as fission barrier parameter, level density parameter, transmission mechanism, and so on. Reaction mechanism and parameter adjustment are selected based on reaction characteristics to obtain more accurate and reasonable result. The accuracy of calculation result are heavily depends on the reaction mechanism selection and parameter adjustment. All obtained result will be compared with ENDF nuclear data library. This work implemented as preliminary study for calculation of fission cross section using modified method of level density parameter determination. Further work will be more focused to the primary target, that is calculation of any fission cross section using different level density models where its level density parameter (LDP) is approximated by Thermal wavelength instead of RIPL data .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Direct local parametrization of nuclear state densities using the back-shifted Bethe formula

Level densities are often parametrized using the back-shifted Bethe formula (BBF) for nuclei that possess experimental data for s-wave neutron resonance average spacings and a complete discrete level sequence at low excitation energies. However, these parametrizations require the additional modeling of the dependence of the spin-cutoff parameter on excitation energy. Here, in this work, we avoid the need to model the spin distribution of level densities by using the experimental data to parametrize directly the state densities, for which the BBF does not depend on the spin-cutoff parameter. This approach allows for a local parameterization of state densities that is independent of the spin-cutoff parameter. We provide these parameters in a tabulated form for applications in nuclear reaction calculations and for testing microscopic approaches to state densities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Statistical properties of Pu 243 , and Pu 242 ( n , γ ) cross section calculation

The level density and γ-ray strength function (γSF) of 243 Pu have been measured in the quasicontinuum using the Oslo method. Excited states in 243 Pu were populated using the 242 Pu(d,p) reaction. The level density closely follows the constant-temperature level density formula for excitation energies above the pairing gap. The γSF displays a double-humped resonance at low energy as also seen in previous investigations of actinide isotopes. The structure is interpreted as the scissors resonance and has a centroid of ω SR = 2.42(5) MeV and a total strength of B SR = 10.1(15) μ 2 N , which is in excellent agreement with sum-rule estimates. Lastly, the measured level density and γSF were used to calculate the 242 Pu(n,γ) cross section in a neutron energy range for which there were previously no measured data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Photon strength and the low-energy enhancement

Several measurements in medium mass nuclei have reported a low-energy enhancement in the photon strength function. Although, much effort has been invested in unraveling the mysteries of this effect, its physical origin is still not conclusively understood. Here, a completely model-independent experimental approach to investigate the existence of this enhancement is presented. The experiment was designed to study statistical feeding from the quasi-continuum (below the neutron separation energy) to individual low-lying discrete levels in {sup 95}Mo produced in the (d, p) reaction. A key aspect to successfully study gamma decay from the region of high-level density is the detection and extraction of correlated particle-gamma-gamma events which was accomplished using an array of Clover HPGe detectors and large area annular silicon detectors. The entrance channel excitation energy into the residual nucleus produced in the reaction was inferred from the detected proton energies in the silicon detectors. Gating on gamma-transitions originating from low-lying discrete levels specifies the state fed by statistical gamma-rays. Any particle-gamma-gamma event in combination with specific energy sum requirements ensures a clean and unambiguous determination of the initial and final state of the observed gamma rays. With these requirements the statistical feeding to individual discrete levels is extracted on an event-by-event basis. The results are presented and compared to {sup 95}Mo photon strength function data measured at the University of Oslo.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evidence for the pair-breaking process in {sup 116,117}Sn

The nuclear level densities of {sup 116,117}Sn below the neutron separation energy have been determined experimentally from the ({sup 3}He,{alpha}{gamma}) and ({sup 3}He,{sup 3}He{sup '}{gamma}) reactions, respectively. The level densities show a characteristic exponential increase and a difference in magnitude due to the odd-even effect of the nuclear systems. In addition, the level densities display pronounced step-like structures that are interpreted as signatures of subsequent breaking of nucleon pairs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Phase lapses in open quantum systems and the non-Hermitian Hamilton operator

We study transmission through a system with N=10 states coupled to K=2 continua of scattering wave functions in the framework of the S matrix theory by using the Feshbach projection operator formalism for open quantum systems. Due to the coupling of the system (being localized in space) to the (extended) continuum of scattering wave functions, the Hamilton operator H{sub eff} of the system is non-Hermitian. The numerical calculations are performed for different distributions of both the positions E{sub i}{sup 0} (i=1,...,N) of the states of the isolated (closed) system and the elements of the coupling vectors V{sup c} between system and continua (c=1,...,K). The overall coupling strength {alpha} simulating the degree of resonance overlapping, is used as a parameter. In all cases, the complex eigenvalues and eigenfunctions of H{sub eff} are controlled by {alpha}. In the regime of overlapping resonances, the well-known spectroscopic reordering processes (resonance trapping) take place because the phases of the eigenfunctions of H{sub eff} are not rigid in the neighborhood of singular points (being crossing points of eigenvalue trajectories). Finally, width bifurcation generates K=2 short-lived and N-K trapped long-lived states. Thus, narrow (Fano-like) resonances may appear in the transmission at high level density. They are similar to, but different from the Fano resonances in the scattering theory with K=1. Phase lapses are related to zeros in the transmission probability. Their number and position (in energy) are determined by the V{sup c} and E{sub i}{sup 0}, but not by {alpha}. However, number and position of the resonance states depend on {alpha} due to resonance trapping occurring in the regime of overlapping resonances. As a consequence, universal phase lapses between every two resonances may appear at high level density while the system will show mesoscopic features at low level density. The phase lapses are not a single phenomenon. Due to their link to singularities in the continuum, they are related also to other 'puzzling' experimental results such as dephasing at low temperature.

74 ATOMIC AND MOLECULAR PHYSICS↗

β -delayed neutron emissions from N > 50 gallium isotopes

β-delayed γ-neutron spectroscopy has been performed on the decay of A = 84 to 87 gallium isotopes at the RI-beam Factory at the RIKEN Nishina Center using a high-efficiency array of 3 He neutron counters (BRIKEN). β-2n-γ events were measured in the decays of all of the four isotopes for the first time, which is direct evidence for populating the excited states of two-neutron daughter nuclei. Detailed decay schemes with the γ branching ratios were obtained for these isotopes, and the neutron emission probabilities (P xn ) were updated from the previous study. Hauser-Feshbach statistical model calculations were performed to understand the experimental branching ratios. We found that the P 1n and P 2n values are sensitive to the nuclear level densities of 1n daughter nuclei and showed that the statistical model reproduced the P 2n /P 1n ratio better when experimental levels plus shell-model level densities fit by the Gilbert-Cameron formula were used as the level-density input. We also showed the neutron and γ branching ratios are sensitive to the ground-state spin of the parent nucleus. Our statistical model analysis suggested J ≤ 3 for the unknown ground-state spin of the odd-odd nucleus 86 Ga, from the I γ (4 + → 2 + )/I γ (2 + → 0 + ) ratio of 84 Ga and the P 2n /P 1n ratio. In conclusion, these results show the necessity of detailed understanding of the decay scheme, including data from neutron spectroscopy, in addition to γ measurements of the multineutron emitters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Statistical model of beta-delayed neutron emission probability

A phenomenological model of the β-delayed neutron-emission probability, based on a level density function, is presented. The effective level density systematics, empirically determined from the experimental data, are found to be relatively flat, with discontinuities at the major shell closures. These systematics have been modeled and used to determine β-delayed neutron-emission probabilities. The present model is compared to other available models and is found to provide an improved description of the β-delayed neutron-emission probabilities across the entire mass surface.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Corrosion Engineering of Part‐Per‐Million Single Atom Pt 1 /Ni(OH) 2 Electrocatalyst for PET Upcycling at Ampere‐Level Current Density

The plastic waste issue has posed a series of formidable challenges for the ecological environment and human health. While conventional recycling strategies often lead to plastic down-cycling, the electrochemical strategy of recovering valuable monomers enables an ideal, circular plastic economy. Here a corrosion synthesized single atom Pt 1 /Ni(OH) 2 electrocatalyst with part-per-million noble Pt loading for highly efficient and selective upcycling of polyethylene terephthalate (PET) into valuable chemicals (potassium diformate and terephthalic acid) and green hydrogen is reported. Electro-oxidation of PET hydrolysate, ethylene glycol (EG), to formate is processed with high Faraday efficiency (FE) and selectivity (>90%) at the current density close to 1000 mA cm −2 (1.444 V vs RHE). The in situ spectroscopy and density functional theory calculations provide insights into the mechanism and the understanding of the high efficiency. Remarkably, the electro-oxidation of EG at the ampere-level current density is also successfully illustrated by using a membrane-electrode assembly with high FEs to formate integrated with hydrogen production for 500 h of continuous operation. In conclusion, this process allows valuable chemical production at high space-time yield and is highly profitable (588–700 $\$$ ton −1 PET), showing an industrial perspective on single-atom catalysis of electrochemical plastic upcycling.

36 MATERIALS SCIENCE↗

Evolution of AlGaN deep level defects as a function of alloying and compositional grading and resultant impact on electrical conductivity

AlGaN:Si epilayers with uniform Al compositions of 60%, 70%, 80%, and 90% were grown by metal-organic vapor phase epitaxy along with a compositionally graded, unintentionally doped (UID) AlGaN epilayer with the Al composition varying linearly between 80% and 100%. The resistivity of AlGaN:Si with a uniform composition increased significantly for the Al content of 80% and greater, whereas the graded UID-AlGaN film exhibited resistivity equivalent to 60% and 70% AlGaN:Si owing to polarization-induced doping. Deep level defect studies of both types of AlGaN epilayers were performed to determine why the electronic properties of uniform-composition AlGaN:Si degraded with increased Al content, while the electronic properties of graded UID-AlGaN did not. The deep level density of uniform-composition AlGaN:Si increased monotonically and significantly with the Al mole fraction. Conversely, graded-UID AlGaN had the lowest deep level density of all the epilayers despite containing the highest Al composition. These findings indicate that Si doping is an impetus for point defect incorporation in AlGaN that becomes stronger with the increasing Al content. However, the increase in deep level density with the Al content in uniform-composition AlGaN:Si was small compared to the increase in resistivity. This implies that the primary cause for increasing resistivity in AlGaN:Si with the increasing Al mole fraction is not compensation by deep levels but rather increasing activation energy for the Si dopant. As a result, the graded UID-AlGaN films maintained low resistivity because they do not rely on thermal ionization of Si dopants.

36 MATERIALS SCIENCE↗

Fermi's golden rule applied to the {gamma} decay in the quasicontinuum of {sup 46}Ti

Particle-{gamma} coincidences from the {sup 46}Ti(p,p{sup '{gamma}}){sup 46}Ti inelastic scattering reaction with 15-MeV protons are utilized to obtain {gamma}-ray spectra as a function of excitation energy. The rich data set allows analyzsis of the coincidence data with various gates on excitation energy. For many independent data sets, this enables a simultaneous extraction of level density and radiative strength function (RSF). The results are consistent with one common level density. The data seem to exhibit a universal RSF as the deduced RSFs from different excitation energies show only small fluctuations provided that only excitation energies above 3 MeV are taken into account. If transitions to well-separated low-energy levels are included, the deduced RSF may change by a factor of 2-3, which might be expected because of the involved Porter-Thomas fluctuations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Constraining calculations of Pu 239 ( n , γ ) cross sections with multistep cascade γ -ray spectra measured at the DANCE facility

Measurements of multistep cascade gamma-ray spectra from several low-lying 1 + resonances in the Pu 239 ( n , γ ) reaction were made using the DANCE detector. The measured spectra are compared to spectra simulated using several models for the photon strength function and the nuclear level density, representing the first analysis of this nature on a fissile nucleus. In general, models of the photon strength function that included a strong M 1 “scissors mode” contribution coupled with a Gilbert-Cameron nuclear level density provided a reasonable description of the spectra. Simulations using photon strength functions and nuclear level densities specifically for Pu 240 , extracted by the Oslo method, resulted in a very good representation of the measured spectra. Neutron-capture cross section calculations that included the scissors mode provided a good estimate of the previously measured values, without additional normalization. However, the scissors-mode energy that produced the best description of the multistep cascade spectra was different from the value that best reproduced the capture cross section. In addition, the 〈 Γ γ 〉 inferred from the multistep cascade calculations was somewhat less than the tabulated value, which was determined from resonance analysis. Published by the American Physical Society 2025

Ullmann, J. L. (ORCID:0000000207784405)↗

Computer enhancement of radiographs

Examination of three relevant noise processes and the image degradation associated with Marshall Space Flight Center's (MSFC) X-ray/scanning system was conducted for application to computer enhancement of radiographs using MSFC's digital filtering techniques. Graininess of type M, R single coat and R double coat X-ray films was quantified as a function of density level using root-mean-square (RMS) granularity. Quantum mottle (including film grain) was quantified as a function of the above film types, exposure level, specimen material and thickness, and film density using RMS granularity and power spectral density (PSD). For various neutral-density levels the scanning device used in digital conversion of radiographs was examined for noise characteristics which were quantified by RMS granularity and PSD. Image degradation of the entire pre-enhancement system (MG-150 X-ray device; film; and optronics scanner) was measured using edge targets to generate modulation transfer functions (MTF). The four parameters were examined as a function of scanning aperture sizes of approximately 12.5 25 and 50 microns.

Dekaney, A.↗

Time domain reflectometry in time variant plasmas

The effects of time-dependent electron density fluctuations on a synthesized time domain reflectometry response of a one-dimensional cold plasma sheath are considered. Numerical solutions of the Helmholtz wave equation, which describes the electric field of a normally incident plane wave in a specified static electron density profile, are used. A study of the effects of Doppler shifts resulting from moving density fluctuations in the electron density profile of the sheath is included. Varying electron density levels corrupt time domain and distance measurements. Reducing or modulating the electron density levels of a given electron density profile affects the time domain response of a plasma and results in motion of the turning point, and the effective motion has a significant effect on measuring electron density locations.

Scherner, Michael J.↗

Opening band gaps of low-dimensional materials at the meta-GGA level of density functional approximations

The quasiparticle band structure can be properly described by Hedin's GW approximation (GW), at a high computational cost. For band gaps, semilocal density functionals up to the generalized gradient approximation (GGA) level cannot compete with the accuracy of hybrid-based approximations or GW. Meta-GGA density functionals with a strong dependence on the kinetic energy density ingredient can potentially give wider band gaps compared with GGAs. The recent TASK meta-GGA density functional from Aschebrock and Kümmel [ Phys. Rev. Research 1 , 033082 (2019) ], is constructed with an enhanced nonlocality in the generalized Kohn-Sham scheme and therefore harbors great opportunities for band gap prediction. Although this approximation was found to yield excellent band gaps of bulk solids, this accuracy cannot be straightforwardly transferred to low-dimensional materials. Additionally, the reduced screening of these materials results in larger band gaps compared with their bulk counterparts, as an additional barrier to overcome. In this paper we demonstrate how the alteration of this functional affects the band gaps of monolayers and nanoribbons and present accurate band gaps competing with the revised Heyd-Scuseria-Ernzerhof (HSE06) approximation. In order to achieve this goal, we have modified the TASK functional (a) by changing the tight upper bound for one- or two-electron systems ( h X 0 ) from 1.174 to 1.29 and (b) by changing the limit of the interpolation function f X ( α → ∞ ) of the TASK functional that interpolates the exchange enhancement factor F X ( s , α ) from α = 0 to 1. The resulting modified TASK (mTASK) was tested for various materials from three dimensions to two dimensions to one dimension (nanoribbons) and was compared with the results of the higher-level hybrid functional HSE06 or with the G 0 W 0 approximation within many-body perturbation theory. We find that mTASK systematically improves the band gaps and band structures of two-dimensional (2D) and 1D systems, without significantly affecting the accuracy of the original TASK for the bulk 3D materials, when compared with the Perdew-Burke-Ernzerhof (PBE) GGA and the strongly constrained and appropriately normed (SCAN) meta-GGA. We further demonstrate the applicability of mTASK by assessing the band structures of transition metal dichalcogenide nanoribbons with respect to various bending curvatures.

36 MATERIALS SCIENCE↗

2n-emission from {sup 205}Pb* nucleus using clusterization approach at E{sub beam}∼14-20 MeV

The dynamics involved in n-induced reaction with {sup 204}Pb target is analyzed and the decay of the composite system {sup 205}Pb* is governed within the collective clusterization approach of the Dynamical Cluster-decay Model (DCM). The experimental data for 2n-evaporation channel is available for neutron energy range of 14-20 MeV and is addressed by optimizing the only parameter of the model, the neck-length parameter (ΔR). The calculations are done by taking the quadrupole (β{sub 2}) deformations of the decaying fragments and the calculated 2n-emission cross-sections find nice agreement with available data. An effort is made to study the role of level density parameter in the decay of hot-rotating nucleus, and the mass dependence in level density parameter is exercised for the first time in DCM based calculations. It is to be noted that the effect of deformation, temperature and angular momentum etc. is studied to extract better description of the dynamics involved.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Heavy Deformed Nuclei in the Shell Model Monte Carlo Method

We extend the shell model Monte Carlo approach to heavy deformed nuclei using a new proton-neutron formalism. The low excitation energies of such nuclei necessitate low-temperature calculations, for which a stabilization method is implemented in the canonical ensemble. We apply the method to study a well-deformed rare-earth nucleus, {sup 162}Dy. The single-particle model space includes the 50-82 shell plus 1f{sub 7/2} orbital for protons and the 82-126 shell plus 0h{sub 11/2}, 1g{sub 9/2} orbitals for neutrons. We show that the spherical shell model reproduces well the rotational character of {sup 162}Dy within this model space. We also calculate the level density of {sup 162}Dy and find it to be in excellent agreement with the experimental level density, which we extract from several experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigation of the Role of the Role of Nuclear Physics in Heavy Element Nucleosynthesis, through the Study of Key Reactions, and the Improvement of Theoretical Reaction Rates (Final Report)

Neutrino-driven winds in core-collapse supernovae have been identified as a possible site for the production of elements heavier than iron. Traditionally, these neutrino-driven winds have been proposed as the site of the main r-process. Recent simulations fail to reproduce the conditions required for the main r-process. while they remain a promising site for producing the lightest elements beyond iron, e.g., Sr, Y, and Zr through the νp process. The efficiency of the νp process depends on the hydrodynamical conditions, the electron fraction (which is related to the neutrino properties), and the nuclear reactions on many short-lived nuclei with limited (if at all) experimental information. The reaction rates on these nuclei are based on theoretical predictions using the Hauser-Feshbach model. Recent sensitivity studies have highlighted the importance of neutron-induced reactions on these nuclei along the νp process path. This work aimed to experimentally constrain reaction rates that are known to play a key role in the neutrino-p process nucleosynthesis. A secondary subsequently-added objective was to start the implementation of techniques that improve the description of nuclear properties in the Hauser-Feshbach model by extending the microscopic nuclear level density description offered via the shell model to high excitation energies without using experiment-based renormalizations. The main objective of this work was the experimental constraint of the 56 Ni(n,p) 56 Co reaction rate via a measurement of the inverse reaction 56 Co(p,n) 56 Ni at the National Superconducting Cyclotron Laboratory (NSCL) and later the Facility for Rare Isotope Beams (FRIB). This reaction is considered the key one for determining the yields possible by the neutrino-p process. A technique for this type of measurement in inverse kinematics at low energies did not exist before this work. The work also had two secondary objectives. First, to contribute to efforts to measure the same reaction in direct kinematics using a radioactive target at Los Alamos National Laboratory (LANL), and second, to advance work to implement shell-model-deduced microscopic level densities in Hauser-Feshbach calculations. The project has resulted in the development of the first technique to perform (p,n) cross-section measurements in relevant-for-astrophysics low energies in inverse kinematics using a magnetic spectrometer or separator, and neutron detectors for neutron tagging. It has also resulted in the precise measurement of the cross-section of the 40 Ar(p,n) 40 K reaction in a proof-of-principle experiment realized by using a beam-line quadrupole of the ReA3 accelerator of NSCL/FRIB. As part of this project the technique was successfully adapted to make use of the superior acceptance of the Separator for Capture Reactions (SECAR) at FRIB. In this project, the required experimental setup simulations and beam optics were developed and tested with the measurement of the 58 Fe(p,n) 58 Cu reaction cross-section. Additionally, this project contributed with simulation work to the development of a technique to measure (n,p) reactions with radioactive targets at LANL, and which resulted in the measurement of the key 56 Ni(n,p) 56 Co reaction cross-section at neutron energies above ≈1 MeV. Last, the project initiated work in the development of shell model based level densities using the moments method.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗