Search NASA⌕ Search

SEARCH · Search NASA

Results for “Loss Rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Rotational dating of middle-aged stars

By the age of about 100 million years, the rotational velocity of solar mass stars becomes independent of the initial rotation rate on the main sequence, due to the strong dependence of the angular momentum loss rate on the rotation rate; once this common value is reached, the rotation velocity depends only on time and the mass of the star. Thus, the measured rotation rate of a low-mass star provides an estimate of its age when its mass is known. The observed rotation periods of low-mass stars in the Hyades are used to test this conclusion and to check the validity of the theoretical angular momentum loss rates. Adapting the magnetic braking model of Kawaler (1988), the angular momentum loss rate is integrated to derive a relation between rotation period and age, and this relation is converted to a period-age-color relation using simple stellar models. Using this method, a mean rotational age for the Hyades is obtained which is in close agreement with the age determined by isochrone fitting.

Kawaler, Steven D.↗

Energetics and optimum motion of oscillating lifting surfaces

Low-frequency, unsteady, lifting-line theory is used to characterize the energetics and optimum motion of an unswept rigid wing oscillating harmonically in an inviscid, incompressible flow. The energetics calculations account for the leading edge suction force, the power absorbed in the wing oscillations, and the energy loss rate produced by vortex shedding. Optimization is achieved by minimizing the average energy loss rate in relation to a given thrust, and a unique solution is found in the three dimensional case for low, reduced frequencies. The two-dimensional solution is nonunique, a condition which is examined in terms of the normal modes of the energy loss rate matrix. An invisible mode with a hydrodynamic efficiency of 100 pct is obtained in the two-dimensional case, causing the nonuniqueness of the solution by yielding no fixed positive thrust through perfect unsteady feathering.

Ahmadi, A. R.↗

In Hot Pursuit of the Hidden Companion of Carinae: An X-Ray Determination of the Wind Parameters

We present X-ray spectral fits to a recently obtained Chandra grating spectrum of eta Carinae, one of the most massive and powerful stars in the Galaxy and which is strongly suspected to be a colliding wind binary system. Hydrodynamic models of colliding winds are used to generate synthetic X-ray spectra for a range of mass-loss rates and wind velocities. They are then fitted against newly acquired Chandra grating data. We find that due to the low velocity of the primary wind (approximately 500 km per sec), most of the observed X-ray emission appears to arise from the shocked wind of the companion star. We use the duration of the lightcurve minimum to fix the wind momentum ratio at eta = 0.2. We are then able to obtain a good fit to the data by varying the mass-loss rate of the companion and the terminal velocity of its wind. We find that M(sub 2) is approximately 10(exp -5) solar mass per yr and upsilon(sub infinity(sub 2)) is approximately 3000 km per sec. With observationally determined values of approximately 500- 700 km per sec for the velocity of the primary wind, our fit implies a primary mass-loss rate of M(sub 1) approximately 2.5 x 10(exp -4) solar mass per yr. This value is smaller than commonly inferred, although we note that a lower mass-loss rate can reduce some of the problems noted when a value as high as 10(exp -3) solar mass per yr is used. The wind parameters of the companion are indicative of a massive star which may or may not be evolved. The line strengths appear to show slightly sub-solar abundances, although this needs further confirmation. It also appears that the primary star is responsible for the nebula.

Pittard, J. M.↗

Biophotonics and Bone Biology

One of the more serious side effects of extended space flight is an accelerated bone loss. Rates of bone loss are highest in the weight-bearing bones of the hip and spine regions, and the average rate of bone loss as measured by bone mineral density measurements is around 1.2% per month for persons in a microgravity environment. It is well known that bone remodeling responds to mechanical forces. We are developing two-photon microscopy techniques to study bone tissue and bone cell cultures to better understand the fundamental response mechanism in bone remodeling. Osteoblast and osteoclast cell cultures are being studied, and the goal is to use molecular biology techniques in conjunction with Fluorescence Lifetime Imaging Microscopy (FLIM) to study the physiology of in-vitro cell cultures in response to various stimuli, such as fluid flow induced shear stress and mechanical stress. We have constructed a two-photon fluorescence microscope for these studies, and are currently incorporating FLIM detection. Current progress will be reviewed. This work is supported by the NASA John Glenn Biomedical Engineering Consortium.

Zimmerli, Gregory↗

The relationship between the Eddington limit, the observed upper luminosity limit for massive stars, and the luminous blue variables

The observed upper luminosity limits in the Galaxy and the LMC are compared with the Eddington limit as estimated for plane-parallel LTE model atmospheres which include the full effects of metal line opacities in the ultraviolet. It is shown that the Humphreys-Davidson (HD) limit corresponds to the locus of extremely low effective gravities. This result suggests that stars approaching the HD limit will suffer high mass-loss rates because of the reduction of the effective gravity due to radiation pressure. These high mass-loss rates ultimtely lead to the core mass fraction reaching its critical value and the reversal of the stellar evolution tracks. It is shown that radiation pressure, as an agent for producing enhanced mass loss near the HD limit, can in a natural way explain the kink in the HD limit near T(eff) roughly 10,000 K and the upper luminosity limit for yellow and red supergiants. The high mass-loss rates of the luminous blue variables, their location in the HR diagram, and their evolutionary stage are also discussed.

Lamers, Henny J. G. L. M.↗

3D Radiative Transfer in Eta Carinae: Application of the SimpleX Algorithm to 3D SPH Simulations of Binary Colliding Winds

Eta Carinae is an ideal astrophysical laboratory for studying massive binary interactions and evolution, and stellar wind-wind collisions. Recent three-dimensional (3D) simulations set the stage for understanding the highly complex 3D flows in eta Car. Observations of different broad high- and low-ionization forbidden emission lines provide an excellent tool to constrain the orientation of the system, the primary's mass-loss rate, and the ionizing flux of the hot secondary. In this work we present the first steps towards generating synthetic observations to compare with available and future HST/STIS data. We present initial results from full 3D radiative transfer simulations of the interacting winds in eta Car.We use the SimpleX algorithm to post-process the output from 3D SPH simulations and obtain the ionization fractions of hydrogen and helium assuming three different mass-loss rates for the primary star. The resultant ionization maps of both species constrain the regions where the observed forbidden emission lines can form. Including collisional ionization is necessary to achieve a better description of the ionization states, especially in the areas shielded from the secondary's radiation. We find that reducing the primary's mass-loss rate increases the volume of ionized gas, creating larger areas where the forbidden emission lines can form.We conclude that post processing 3D SPH data with SimpleX is a viable tool to create ionization maps for eta Car.

Eta Carinae↗

Wave-driven winds from cool stars. II - Models for T Tauri stars

The Alfven wave-driven wind theory of Hartmann and MacGregor is applied to T Tauri variables, including modifications which permit the calculation of wind temperatures. It is shown that large wave fluxes generate low-temperature winds, which can radiate strongly in Balmer and other optical emission lines. If wave fluxes are restricted to be less than the stellar luminosity, mass loss rates are restricted to values less than or equal to 10 to the -8th solar mass per year. Although these mass loss rates are low in comparison to many previous estimates, it is shown that the wind models produce optical and ultraviolet emission roughly consistent with observations. The theory predicts large wave amplitudes, so that 'turbulent' velocities are generally comparable to, or larger than, local expansion velocities in the optical line-emitting regions, thus making the Sobolev approximation invalid. It is suggested that the discrepancy between the mass loss rates predicted here and previously estimated values is due to the inapplicability of the Sobolev approximation in T Tauri winds.

Hartmann, L.↗

The Seasonal and Interannual Variability of the Budgets of N2O and CCl3F

The 6-year wind archives from the Goddard Institute for Space Studies/Global Climate-Middle Atmosphere Model (GISS/GCMAM) were in- put to the GISS/Harvard/Irvine Chemical Transport Model (G/H/I CTM) to study the seasonal and interannual variability of the budgets and distributions of nitrous oxide (N2O) and trichlorofluoromethane (CCl3F), with the corresponding chemical loss frequencies recycled and boundary conditions kept unchanged from year to year. The effects of ozone feedback and quasi-biennial oscillation (QBO) were not included. However, the role of circulation variation in driving the lifetime variability is investigated. It was found that the global loss rates of these tracers are related to the extratropical planetary wave activity, which drives the tropical upward mass flux. For N2O, a semiannual signal in the loss rate variation is associated with the interhemispheric asymmetry in the upper stratospheric wave activity. For CCl3F, the semiannual signal is weaker, associated with the comparatively uniform wave episodes in the lower stratosphere. The loss rates lag behind the wave activity by about 1-2 months. The interannual variation of the GCM generated winds drives the interannual variation of the annually averaged lifetime. The year-to-year variations of the annually averaged lifetimes can be about 3% for N2O and 4% for CCl3F.

Wong, Sun↗

Understanding Structure in Line-Driven Stellar Winds Using Ultraviolet Spectropolarimetry in the Time Domain

The most massive stars are thought to lose a significant fraction of their mass in a steady wind during the main-sequence and blue supergiant phases. This in turn sets the stage for their further evolution and eventual supernova, and preconditions the surrounding medium for all following events, with consequences for ISM energization, chemical enrichment, and dust formation. Understanding these processes requires accurate observational constraints on the mass-loss rates of the most luminous stars, which can also be used to test theories of stellar wind driving. In the past, mass-loss rates have been characterized via collisional emission processes such as optical Hα and free-free radio emission, but these so-called “density squared” diagnostics require correction in the presence of widespread clumping. Recent observational and theoretical evidence points to the likelihood of a ubiquitously high level of such clumping in hot-star winds, but quantifying its effects requires a deeper understanding of the complex dynamics of radiatively driven winds and their stochastic instabilities. Furthermore, large-scale structures initiating in surface anisotropies and propagating throughout the wind can also affect wind driving and alter mass-loss diagnostics. Time series spectroscopy of high resonance-line opacity in the UV, capable of high resolution and high signal-to-noise, are required to better understand these complex dynamics, and more accurately determine mass-loss rates. The proposed Polstar mission (Scowen et al. 2022, this volume) provides the necessary resolution at the Sobolev (∼10 km s −1 ) or sound-speed (∼20 km s −1 ) scale, for over three dozen bright galactic massive stars with signal-to noise an order of magnitude above that of the celebrated MEGA campaign (Massa et al. 1995) of the International Ultraviolet Explorer (IUE), via continuous observations that track propagating structures through the winds in real time. Supporting geometric constraints are provided by the polarimetric capabilities present in all the datasets of such a mission.

Polstar – NASA MIDEX↗

Vaporization of graphite in the temperature range of 4000 to 4500 K

The vaporization of graphite under intense laser radiation is considered both theoretically and experimentally. Under intense radiation, the mass-loss rate can be high enough to cause the flow in the laser plume to be supersonic. It is shown that under these conditions the vaporization process is coupled to the plume gasdynamics and the mass-loss rate for graphite is 62% of the free vaporization rate. Experimental results are presented for surface temperatures from 3985 to 4555 K and mass-loss rates from 0.56 to 27.0 g per sq cm sec. The results are used to determine the vapor pressure of graphite in a pressure range of 2 to 11 atm, and the values are shown to be in agreement with the JANAF vapor pressure curve.

Lundell, J. H.↗

Models of Pluto's upper atmosphere

Best guesses as to the thermal structure and composition of Pluto's atmosphere have led to speculations of substantial loss rates of methane from the planet over cosmogonic time scales. Results from recent stellar occultation measurements, and using a Parker-type hydrodynamic calculation, show that the loss rates may actually be lower by as much as a factor of about 5, depending upon the efficiency of heating of the atmosphere via the absorption of solar EUV and upon the true atmospheric composition, if the thermal structure of the upper atmosphere is properly taken into account. The loss rate may even be less (by another factor of about 10) if there is minimal heating of the upper atmosphere.

Mcnutt, Ralph L., Jr.↗

Wintertime Overnight NOx Removal in a Southeastern United States Coal-Fired Power Plant Plume: A Model for Understanding Winter NOx Processing and Its Implications

Nitric oxide (NO) is emitted in large quantities from coal-burning power plants. During the day, the plumes from these sources are efficiently mixed into the boundary layer, while at night, they may remain concentrated due to limited vertical mixing during which they undergo horizontal fanning. At night, the degree to which NO is converted to HNO3 and therefore unable to participate in next-day ozone (O3) formation depends on the mixing rate of the plume, the composition of power plant emissions, and the composition of the background atmosphere. In this study, we use observed plume intercepts from the Wintertime INvestigation of Transport, Emissions and Reactivity (WINTER) campaign to test sensitivity of overnight NOx removal to the N2O5 loss rate constant, plume mixing rate, background O3, and background levels of volatile organic compounds using a 2-D box model of power plant plume transport and chemistry. The factor that exerted the greatest control over NOx removal was the loss rate constant of N2O5. At the lowest observed N2O5 loss rate constant, no other combination of conditions converts more than 10 percent of the initial NOx to HNO3. The other factors did not influence NOx removal to the same degree.

air quality↗

Demisability of GFRP and CFRP Components of Reentering Orbital Debris: Phase I Test Results

Observations of surviving reentry debris on the ground and research performed by Hyperschall Technologie Göttingen (HTG) [1] indicated that significantly more glass fiber-reinforced polymer (GFRP) and carbon fiber-reinforced polymer (CFRP) components survive reentry than current models predict. NASA’s Orbital Debris Program Office conducted a series of tests to evaluate the accuracy of material demise models for reentering orbital debris used in NASA’s Object Reentry Survival Analysis Tool (ORSAT) and Debris Assessment Software (DAS). Testing is planned in a multi-phase series to allow for quick quantification of results as well as refinement of methods resulting from lessons learned during early phases. The Phase 1 tests discussed here validated ORSAT models for homogeneous metals, provided an efficient quantification of composite material demisability properties like mass loss rate and overall time to demise, and identified potential failure modes, which are currently not well understood. Phase 2 tests will be used to further understand mass loss rates and modes of both thermal and mechanical failure in composite materials. The authors exposed 95 samples of aluminum, CFRP, Kevlar fiber-reinforced polymer, GFRP, and sheets of G10 fiberglass to conditions approximating the reentry environment using an inductively coupled plasma (ICP) torch facility. The cylindrical CFRP samples were exposed to the atmospheric pressure plasma, at both the end and the midpoint, to investigate the difference in demisability between parts with exposed edges, like panels, and parts with no edges, such as carbonoverwrapped pressure vessels (COPVs). In a non-oxidative environment, no composite materials demised within the 5-minute test time. In the oxidative, elevated heat flux environment, CFRP samples demised between 210 s and 270 s. For the first 100 s of insertion time, most of the mass loss was due to pyrolysis of resin, creating an approximately bi-linear mass-loss rate curve with time. In a non-oxidative environment, carbon filaments were observed to unravel from some of the CFRP end-burned samples; however, this effect did not seem to affect the overall time to demise for the samples significantly. These results indicate that both GFRP and CFRP components survive reentry with significantly more remaining mass than current models predict.

Greene, Benton R.↗

Mass loss in Alpha Cygni - Synthetic H-Alpha profiles

Alpha Cygni (A2 Ia) is the brightest and best-studied A type supergiant. The star's position in the H-R diagram makes the determination of its mass loss rate extremely important. The present investigation is concerned with a semiempirical modeling of the H-alpha profile in Alpha Cyg in connection with the objective of estimating the mass loss rate and further constraining the physical state of the stellar wind. The synthetic H-alpha profiles considered are compared with the observed profiles in Alpha Cyg. It is concluded that a spherically symmetric, steady-state model, with the network of hydrogen transitions treated in detail, can fit the deeper observed profiles but not the shallower ones. The obtained results indicate that, within the context of the turbulent models, the mass loss rate of Alpha Cyg is (1.7 + or - 0.4) x 10 to the -7th solar mass per year.

Kunasz, P. B.↗

(Fe II) 1.53 and 1.64 micron emission from pre-main-sequence stars

We present flux-calibrated profiles of the (Fe II) 1.53 and 1.64 micron lines in five pre-main-sequence stars, PV Cep, V1331 Cyg, R Mon, and DG and HL Tau. The line centroids are blueshifted in all five sources, and four of the five have only blueshifted flux. In agreement with previous studies, we attribute the line asymmetries to local obscuration by dusty circumstellar disks. The absence of redshifted flux implies a minimum column density of obscuring material. The largest limit, N(sub H) greater than 3 x 10(exp 22)/sq cm, derived for V1331 Cyg, suggests disk surface densities greater than 0.05 g/sq cm and disk masses greater than 0.001 solar mass within a radius of approximately 200 AU. The narrow high-velocity lines in PV Cep, V1331 Cyg, and HL Tau require formation in well collimated winds. The maximum full opening angles of their winds range from less than 20 deg in V1331 Cyg to less than 40 deg in HL Tau. The (Fe II) data also yield estimates of the electron densities (n(sub e) approximately 10(exp 4)/cu cm), hydrogen ionization fractions (f(sub H(+)) approximately 1/3), mass-loss rates (approximately 10(exp -7) to 2 x 10(exp -6) solar mass/yr), and characteristic radii of the emitting regions (approximately 32 to approximately 155 AU). The true radial extents will be larger, and the mass-loss rates smaller, by factors of a few for the outflows with limited opening angles. In our small sample the higher mass stars have stronger lines, larger emitting regions, and greater mass-loss rates. These differences are probably limited to the scale and energetics of the envelopes, because the inferred geometries, kinematics and physical conditions are similar. The measured (Fe II) profiles samples both 'high'- and 'low'-velocity environments. Recent studies indicate that these regions have some distinct physical properties and may be spatially separate. The (Fe II) data show that similar sizes and densities can occur in both environments.

Hamann, Fred↗

On winds and X-rays of O-type stars

The dependence between stellar wind parameters and their X-ray fluxes is studied. Bolometric corrections are examined as a function of temperature, and a bolometric luminosity scale is proposed for the O-type stars. New mass-loss rates and terminal velocities of 40 well-known, bright single stars or binaries are measured, and the Lyman-alpha profile is modeled for the stars to determine the amount of X-ray-absorbing hydrogen. The mass-loss rates found for the latest O-type stars are significantly smaller than expected from the power-law dependences known for brighter, hot stars. The mass-loss rates for binary system do not differ significantly from those of single stars. A dependence is found between the wind energy of the single stars and the X-ray luminosity, and it is suggested that this dependence is at least partially responsible for the proportionality between L(x) and L(bol). The X-ray fluxes from the close binaries behave in qualitative agreement with predictions from simple theories of colliding stellar winds.

Chlebowski, Tomasz↗

A comparison of the X-ray properties of X Persei and Gamma Cassiopeiae

The greater than 0.0001 solar mass/year loss rates required to power X-ray sources, if associated compact objects are white dwarfs, are many orders of magnitude greater than even the highest estimates for the main sequence Be stars Chi Per and Gamma Cas, confirming that the compact objects in these systems are neutron stars. While observed mass loss rates are of the order of that required to power the X-ray emission from a neutron star, X-ray measurements have established rates at least an order of magnitude above UV estimates, supporting earlier suggestions of an inclination dependence in the mass loss from rapidly rotating main sequence OB stars which results in mass loss rates in the orbital plane that are at least one order of magnitude higher, or terminal velocities that are at least a factor of 2.0 lower, than is indicated by UV measurements.

White, N. E.↗

The X-Ray Lightcurve of Eta Carinae: Refinement of the Orbit and Evidence for Phase Dependent Mass Loss

We solve the RXTE X-ray lightcurve of the extremely luminous and massive star eta Carinae with a colliding wind emission model to refine the ground-based orbital elements. The sharp decline to X-ray minimum at the end of 1997 fixes the date of the last periastron passage at 1997.95 +/- 0.05, not 1998.13 as derived from ground-based radial velocities. This helps resolve a discrepancy between the ground-based radial velocities and spatially-resolved velocity measures obtained by STIS. The X-ray data are consistent with a mass function f(M) approx. = 1.5, lower than the value f(M) approx. = 7.5 previously reported, so that the masses of eta Carinae and the companion are M(sub eta) greater than or = 80 solar mass and M(sub c) approx. 30 solar mass respectively. In addition the X-ray data suggest that the mass loss rate from eta Carinae is generally less than 3 x 10(exp -4) solar mass/yr, about a factor of 5 lower than that derived from some observations in other wavebands. We could not match the duration of the X-ray minimum with any standard colliding wind model in which the wind is spherically symmetric and the mass loss rate is constant. However we show that we can match the variations around X-ray minimum if we include an increase of a factor of approx. 20 in the mass loss rate from eta Carinae for approximately 80 days following periastron. If real, this excess in M would be the first evidence of enhanced mass flow off the primary when the two stars are close (presumably driven by tidal interactions). Our interpretation of the X-ray data suggest that the ASCA and RXTE X-ray spectra near the X-ray minimum are significantly contaminated by unresolved hard emission (E greater than or = 2 keV) from sonic other nearby source, probably associated with scattering of tile colliding wind emission by circumstellar dust. Based on the X-ray fluxes the distance to n Carinae is 2300 pc with formal uncertainties of only approx. 10%.

Corcoran, M. F.↗