Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC RIGIDITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Transport of Ion Beams in Matter: Part II

The paper deals in tutorial and systematic manner with basic concepts describing ion beams and their transport in matter. In the previous part, relativistic parameters of moving charged particles and related beam-parameters like energy, momentum, magnetic beam rigidity, momentum (energy) spread, emittance diagram and beam emittance were reviewed. The sigma-matrix, the phase-space and the Twiss parameters were introduced. In this part, basic processes of interaction of ion beams with matter are explained with emphasis on the effects especially relevant for isotope production and particle therapy. These effects include energy losses, beam fragmentation, nuclear reactions, target activation, range of ion beams in matter, range straggling, etc. Demonstrative examples are given using Monte Carlo simulations by SRIM (Stopping and Ranges of Ions in Matter) and S{sup 3}M(SRIM Supporting Software Modules).

43 PARTICLE ACCELERATORS↗

THE DISCOVERY OF A STRONG MAGNETIC FIELD AND COROTATING MAGNETOSPHERE IN THE HELIUM-WEAK STAR HD 176582

We report the detection of a strong, reversing magnetic field and variable H{alpha} emission in the bright helium-weak star HD 176582 (HR 7185). Spectrum, magnetic, and photometric variability of the star are all consistent with a precisely determined period of 1.5819840 {+-} 0.0000030 days which we assume to be the rotation period of the star. From the magnetic field curve, and assuming a simple dipolar field geometry, we derive a polar field strength of approximately 7 kG and a lower limit of 52 deg. for the inclination of the rotation axis. However, based on the behavior of the H{alpha} emission, we adopt a large inclination angle of 85 deg. and this leads to a large magnetic obliquity of 77{sup 0}. The H{alpha} emission arises from two distinct regions located at the intersections of the magnetic and rotation equators and which corotate with the star at a distance of about 3.5 R{sub *} above its surface. We estimate that the emitting regions have radial and meridional sizes on the order of 2 R{sub *} and azimuthal extents (perpendicular to the magnetic equator) of less than approximately 0.6 R{sub *}. HD 176582 therefore appears to show many of the cool magnetospheric phenomena as that displayed by other magnetic helium-weak and helium-strong stars such as the prototypical helium-strong star {sigma} Ori E. The observations are consistent with current models of magnetically confined winds and rigidly rotating magnetospheres for magnetic Bp stars.

79 ASTRONOMY AND ASTROPHYSICS↗

A rebound shock mechanism for solar fibrils

Flows along a rigid solar magnetic flux tube which is horizontal over a substantial portion of its length are numerically investigated. A single, quasi-impulsive force near the base of the first vertical segment drives a series of upward propagating rebound shocks on the flux tube. When the horizontal segment is in the corona, the shocks raise the transition region onto the horizontal segment and eventually onto the coronal vertical segment. The material behind the displaced transition region resembles a fibril on the horizontal segment, and a short spicule on the second vertical segment. A full-sized spicule does not develop. The resulting density of the material on the horizontal segment is 10 to the -14th g/cu cm, which is consistent with the observed densities in fibrils. When the horizontal segment is in the chromosphere, the motions and densities induced on the horizontal segment do not resemble those of observed fibrils, and a full-sized spicule again does not develop.

Sterling, Alphonse C.↗

Long-term behaviour of starspots. III - Active longitudes on the long-period RS CVn star HK Lacertae

Thirteen years of photometry were used to study active longitudes on the surface of HK Lacertae. The decaying and forming phenomena of active areas in the years of 1980-1981, 1983-1984, and 1988-1989 are shown. New activity centers suddenly occur near the same orbital phase (0.6) and have lifetimes of several (greater than 6) years. The average rotational period of HK Lac is 24.2852 d; compared to the orbital period of 24.4284 d, this implies a 32 degree/year drift of the active areas on the stellar surface. Two possible interpretations for the period difference are discussed: pseudosynchronism and rigidity of magnetic patterns. The active longitudes on HK Lac are compared with similar phenomena found on the sun.

Olah, K.↗

Magnetic properties versus interface density in rigid-exchange-coupled amorphous multilayers with induced uniaxial anisotropy

We demonstrate the possibility to tune the saturation magnetization, coercivity, and uniaxial in-plane anisotropy constant in amorphous bilayers and multilayers of Co 85 (Al 70 Zr 30 ) 15 and Sm 11 Co 82 Ti 7 through the interface density. From magnetometry and x-ray circular dichroism (XMCD) measurements, we conclude that the easy-axis coercivity μ 0 H c increases four times when the number of bilayer repetitions, N, increases from 1 to 10 within a constant total sample thickness of 20 nm. At the same time, the anisotropy constant K u also increases by a factor four, whereas the saturation magnetization M s decreases slightly. The Co spin and orbital moments, m s and m l , are found to be approximately constant within the sample series. The average total Co moment is only 0.8-0.9 μ B /atom, but the m l /m s ratio is strongly enhanced compared to pure Co. Magnetization curves extracted from XMCD measurements show that the Co and Sm moments are ferromagnetically coupled for all samples.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of irregularities in angular velocities of rotating assemblies in memory devices on magnetic carriers

Problems in measurement of irregularities in angular velocity of rotating assemblies in memory devices with rigid and flexible magnetic data carriers are discussed. A device and method for determination of change in angular velocities in various frequency and rotation rate ranges are examined. A schematic diagram of a photoelectric sensor for recording the signal pulses is provided. Mathematical models are developed to show the amount of error which can result from misalignment of the test equipment.

Virakas, G. I.↗

Rotor dynamic behaviour of a high-speed oil-free motor compressor with a rigid coupling supported on four radial magnetic bearings

The combination of a high-speed motor, dry gas seals, and magnetic bearings realized in this unit facilitates the elimination of oil. The motor is coupled with a quill shaft to the compressor. This yields higher natural frequencies of the rotor than with the use of a diaphragm coupling and helps to maintain a sufficient margin of the maximum speed to the frequency of the second compressor bending mode. However, the controller of each bearing then has to take the combined modes of both machines into account. The requirements for the controller to ensure stability and sufficient damping of all critical speeds are designed and compared with the implemented controller. The calculated closed loop behavior was confirmed experimentally, except the stability of some higher modes due to slight frequency deviations of the rotor model to the actual rotor. The influence of a mechanical damper as a device to provide additional damping to high models is demonstrated theoretically. After all, it was not necessary to install the damper, since all modes cold be stabilized by the controller.

Schmied, J.↗

Stability of spin-driven ferroelectricity in the thin-film limit: Coupling of magnetic and electric order in multiferroic TbMnO3 films

We demonstrate spin-spiral-induced ferroelectricity in epitaxial TbMnO3 films grown on YAlO3 substrates down to a film thickness of 6nm. The ferroelectric polarization is identified by optical second-harmonic generation. Using x-ray resonant magnetic scattering we directly prove the existence of a noncollinear magnetic structure in the ferroelectric phase and thus bulk-like multiferroicity. The electric-field-induced reversal of the magnetic domains along with the reversal of the ferroelectric polarization evidences the rigid coupling of magnetic and ferroelectric order and hence a giant magnetoelectric effect in the films.

Becher, Carsten↗

HZE particle shielding using confined magnetic fields

The great rigidities characteristic of high energy heavy ion (HZE) particles are judged to preclude near term use of confined magnetic fields of reasonable dimensions and strengths for small spacecraft shielding on long duration manned missions. It is noted that a Mars mission-class shield, although effective against solar protons, would be useless for HZE particles unless the mass and size of the shield are increased by several orders of magnitude (to yield a shield comparable to those contemplated for permanent space stations).

Townsend, L. W.↗

Electric field control of magnetization direction across the antiferromagnetic to ferromagnetic transition

Electric-field-induced magnetic switching can lead to a new paradigm of ultra-low power nonvolatile magnetoelectric random access memory (MeRAM). To date the realization of MeRAM relies primarily on ferromagnetic (FM) based heterostructures which exhibit low voltage-controlled magnetic anisotropy (VCMA) efficiency. On the other hand, manipulation of magnetism in antiferromagnetic (AFM) based nanojunctions by purely electric field means (rather than E-field induced strain) remains unexplored thus far. Ab initio electronic structure calculations reveal that the VCMA of ultrathin FeRh/MgO bilayers exhibits distinct linear or nonlinear behavior across the AFM to FM metamagnetic transition depending on the Fe- or Rh-interface termination. We predict that the AFM Fe-terminated phase undergoes an E-field magnetization switching with large VCMA efficiency and a spin reorientation across the metamagnetic transition. In sharp contrast, while the Rh-terminated interface exhibits large out-ofplane (in-plane) MA in the FM (AFM) phase, its magnetization is more rigid to external E-field. These findings demonstrate that manipulation of the AFM Néel-order magnetization direction via purely E-field means can pave the way toward ultra-low energy AFM-based MeRAM devices.

36 MATERIALS SCIENCE↗

Transfer of Millimeter‐Scale Strained Multiferroic Epitaxial Thin Films on Rigid Substrates via an Epoxy Method Producing Magnetic Property Enhancement

The demonstration of epitaxial thin film transfer has enormous potential for thin film devices free from the traditional substrate epitaxy limitations. However, large-area continuous film transfer remains a challenge for the commonly reported polymer-based transfer methods due to bending and cracking during transfer, especially for highly strained epitaxial thin films. In this work, a new epoxy-based, rigid transfer method is used to transfer films from an SrTiO 3 (STO) growth substrate onto various new substrates, including those that will typically pose significant problems for epitaxy. An epitaxial multiferroic Bi 3 Fe 2 Mn 2 O x (BFMO) layered supercell (LSC) material is selected as the thin film for this demonstration. The results of surface and structure studies show an order of magnitude increase in the continuous area of transferred films when compared to previous transfer methods. The magnetic properties of the BFMO LSC films are shown to be enhanced by the release of strain in this method, and ferromagnetic resonance is found with an exceptionally low Gilbert damping coefficient. The large-area transfer of this highly strained complex oxide BFMO thin film presents enormous potential for the integration of many other multifunctional oxides onto new substrates for future magnetic sensors and memory devices.

bismuth oxides↗

Fixed-base and two-body equations of motion for an Annular Momentum Control Device (AMCD)

Fixed base and two body equations of motion for an Annular Momentum Control Device (AMCD) are presented. An AMCD consists of a spinning annular rim which is suspended by noncontacting magnetic bearings and powered by a noncontacting linear electromagnetic motor. The fixed base equations are for a rigid AMCD rim suspended by magnetic bearings attached to a rigid fixed base. The two body equations are for a rigid AMCD rim suspended by magnetic bearings attached to a rigid body spacecraft. The fixed base equations are applicable to any potential ground based AMCD application such as energy storage.

Groom, N. J.↗

Robust and real-time rotor control with magnetic bearings

This paper deals with the sliding mode control of a rigid rotor via radial magnetic bearings. The digital control algorithm and the results from numerical simulations are presented for an experimental rig. The experimental system which has been set up to digitally implement and validate the sliding mode control algorithm is described. Two methods for the development of control softwares are presented. Experimental results for individual rotor axis are discussed.

Sinha, A.↗