Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETISM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Cooperative response of magnetism and superconductivity in the magnetic superconductor RbEuFe 4 As 4

Herein, we present a study of the magnetic-flux evolution in the magnetic superconductor RbEuFe 4 As 4 performed using magneto-optical imaging and magnetization measurements during field cooling and warming and magnetic field cycling at temperatures above and below the magnetic transition point, T$_m$. The vortex patterns emerging at T ≲ T$_m$ reveal that the Eu-spin subsystem serves as an internal pump of the magnetic flux while the superconducting critical current controls the delivery of magnetic-flux quanta into the bulk. The interplay of magnetic susceptibility amplifying the magnetic induction and vortex pinning attenuating the magnetic-flux entry results in a field- and temperature-dependent critical state that emulates a paramagnetic Meissner effect. The observed vortex dynamics corresponds to a nontrivial spatial current distribution and yields a self-consistent inhomogeneous enhancement of the sample magnetization.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Magnetic Measurements of Storage Ring Magnets for the APS Upgrade Project

Extensive prototyping of storage ring magnets is ongoing at the Advanced Photon Source (APS) in support of the APS Multi-Bend Achromat (MBA) upgrade project (APS-U) [1]. As part of the R&D activities four quadrupole magnets with slightly different geometries and pole tip materials, and one sextupole magnet with vanadium permendur (VP) pole tips were designed, built and tested. Magnets were measured individually using a rotating coil and a Hall probe for detailed mapping of the magnetic field. Magnets were then assembled and aligned relative to each other on a steel support plate and concrete plinth using precision machined surfaces to gain experience with the alignment method chosen for the APS-U storage ring magnets. The required alignment of magnets on a common support structure is 30 μm rms. Measurements of magnetic field quality, strength and magnet alignment after subjecting the magnets and assemblies to different tests are presented.

Doose, C.↗
DOE OSTI2020

Laminated magnetic materials for on-chip magnetic inductors/transformers

A technique relates to a method of forming a laminated multilayer magnetic structure. An adhesion layer is deposited on a substrate. A magnetic seed layer is deposited on top of the adhesion layer. Magnetic layers and non-magnetic spacer layers are alternatingly deposited such that an even number of the magnetic layers is deposited while an odd number of the non-magnetic spacer layers is deposited. The odd number is one less than the even number. Every two of the magnetic layers is separated by one of the non-magnetic spacer layers. The first of the magnetic layers is deposited on the magnetic seed layer, and the magnetic layers each have a thickness less than 500 nanometers.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Laminated magnetic materials for on-chip magnetic inductors/transformers

A technique relates to a method of forming a laminated multilayer magnetic structure. An adhesion layer is deposited on a substrate. A magnetic seed layer is deposited on top of the adhesion layer. Magnetic layers and non-magnetic spacer layers are alternatingly deposited such that an even number of the magnetic layers is deposited while an odd number of the non-magnetic spacer layers is deposited. The odd number is one less than the even number. Every two of the magnetic layers is separated by one of the non-magnetic spacer layers. The first of the magnetic layers is deposited on the magnetic seed layer, and the magnetic layers each have a thickness less than 500 nanometers.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Superconducting Magnet System Concept with a Mechanical Energy Transfer in the Magnetic Field

There is an interest to design superconducting magnet systems working in a persistent current mode. These systems continuously generate magnetic field with disconnected power source working like permanent magnet devices. In this paper proposed a magnet system concept based on the direct mechanical energy transfer in the magnetic field. Short circuited superconducting coils do not have current leads and power source. To pump the mechanical energy in the superconducting coil used a magnetizer which magnetically coupled with the coil. The mechanical removing the magnetizer from the magnet induces a persistent current in the superconducting coil which generates the magnetic field. Iron dominated magnet system concept was investigated using OPERA3d code which confirmed a visibility of proposed approach.

43 PARTICLE ACCELERATORS↗
DOE OSTI2018

Relationship between laser energy input, microstructures and magnetic properties of selective laser melted Fe-6.9%wt Si soft magnets

Highlights: • Effect of laser energy input on magnetic properties of SLM Fe-6.9%wt.Si is described; • Magnetic properties can be described as function of as-built microstructure after stress-relief post-treatment; • Samples with density >99% and strong crystallographic texture along BD have the best magnetic properties; • At very high laser energy, a strong cube texture forms that deteriorates the magnetic properties. - Abstract: Selective Laser Melting (SLM), a powder-bed Additive Manufacturing technology, can be used in combination with high temperature post-annealing to produce high-silicon steel parts characterised by quasi-static magnetic properties comparable to those of commercial electrical steel. However, the role of the as-built microstructure on the magnetic properties is still unexplored. Therefore, in this study the effect of the energy input of the processing laser on the magnetic properties of the material is investigated. The magnetic properties are determined for 4 mm-high rings obtained using three laser energy input values that provide a good compromise in terms of porosity and crack formation. The best magnetic properties are obtained for the rings built using a value of energy input that produces a strong fibrous crystallographic texture, in which one of the crystallographic <001> axes is preferentially aligned along the build direction. Whether the magnetic properties change with sample direction as a result of the crystallographic texture will be the subject of future research.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetic Texture in Insulating Single Crystal High Entropy Oxide Spinel Films

Magnetic insulators are important materials for a range of next-generation memory and spintronic applications. Structural constraints in this class of devices generally require a clean heterointerface that allows effective magnetic coupling between the insulating layer and the conducting layer. However, there are relatively few examples of magnetic insulators that can be synthesized with surface qualities that would allow these smooth interfaces and precisely tuned interfacial magnetic exchange coupling, which might be applicable at room temperature. In this work, we demonstrate an example of how the configurational complexity in the magnetic insulator layer can be used to realize these properties. The entropy-assisted synthesis is used to create single-crystal (Mg 0.2 Ni 0.2 Fe 0.2 Co 0.2 Cu 0.2 )Fe 2 O 4 films on substrates spanning a range of strain states. These films show smooth surfaces, high resistivity, and strong magnetic responses at room temperature. Furthermore, local and global magnetic measurements further demonstrate how strain can be used to manipulate the magnetic texture and anisotropy. These findings provide insight into how precise magnetic responses can be designed using compositionally complex materials that may find application in next-generation magnetic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High precision magnetic field measurement and mapping of the LEReC 180 degree bending magnet using very low field NMR with hall combined probe (140 - 350 gauss)

The Relativistic Heavy Ion Collider (RHIC) at BNL are using the Low Energy RHIC Electron Cooling (LEReC) to conduct experiments that search for the quantum chromodynamic (QCD) critical point. The first ever electron cooling based on the RF acceleration of electron beams was experimentally demonstrated on April 5, 2019 at LEReC at BNL. The first critical step in obtaining successful 3D non-magnetized cooling of the Au ion bunches in the RHIC cooling section was matching the electron beam energy with a relative error less than 5*10 -4 to the ion beam energy. Part of the LEReC beamline is a dipole magnet that bends the electron beam 180 degree. One of the most outstanding measurement challenges is that the dipole field is so low (≈200 G). Most of the existing NMR probes can only measure fields >400 G. Lower signal-to-noise ratio at low fields is requires the use of larger sample volumes. Working with CAYLAR, a NMR probe has been redesigned and optimized for these low field measurements with high resolution. We report the methods, challenges, and results for extensive magnetic field mappings of the 180 dipole magnet. A combination of NMR and Hall sensors has been successfully implemented to measure uniform field regimes inside the magnet center area and non-uniform field regimes at the magnet ends. Detailed measurement and mapping have been performed at five radii and five heights along the beam trajectory. Meanwhile a finite element magnetic modeling simulation of the magnet using Opera software has been performed. The calculated and measured data are compared, and the calculated data is good reference for measured data over long length mapping from magnet edge to center. The measured magnetic measurement data is directly useful for beam instrumentation, diagnostics and operation.

Magnetic Field Measurement↗
DOE OSTI2025

Dilute magnetic impurity-induced effective phonon magnetic moment in Fe-doped monolayer MoS 2

Realization of large effective phonon magnetic moment in monolayer MoS 2 has established an important route for exploring intriguing magnetic phenomena in a nonmagnetic material. The sizable coupling between the orbital transition and the circularly polarized phonon results in the large effective phonon magnetic moment. In this work, using magneto-Raman spectroscopy, we investigate substitutional doping of magnetic atoms as a tuning knob of the electronic and phononic properties of MoS 2 . We show that Fe-doping polarizes the spin of the conduction bands and introduces a localized Fe band underneath the conduction band. As a result, an additional orbital transition between the Mo 4d and Fe 3d states emerges, producing an orbital-phonon hybridized mode at 283 cm −1 . Our magnetic field dependent measurements demonstrate that this new mode carries 2.8 $\mu_{\mathrm{B}}$ effective phonon magnetic moment, which is comparable to that of the undoped MoS 2 . Moreover, even though a long-range magnetic order is absent in Fe-doped MoS 2 , the local magnetic moment of Fe modifies the nature of the spin fluctuation, producing monotonically increasing quasielastic scattering spectral weight as temperature decreases. Our results highlight two-dimensional dilute magnetic semiconductors synthesized by substitutional doping as a promising material platform to manipulate the phonon magnetic moment through orbital-phonon coupling.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Effect of Mechanical Stresses and Annealing on the Magnetic Structure and the Magnetic Impedance of Amorphous CoFeSiBCr Microwires

The structural and magnetic properties of amorphous ferromagnetic microwires can undergo significant measurements under the action of external mechanical stresses and heat treatment. The study of transformations occurring in this case is important for designing various sensors of mechanical stresses, loading, and temperature and also for inducing in the wires a certain type of magnetic anisotropy that plays a significant role in the realization of various effects in them. In this work, the influence of external stresses and annealing on the processes of the magnetization and the magnetic impedance of Co{sub 71}Fe{sub 5}B{sub 11}Si{sub 10}Cr{sub 3} microwires having a low positive magnetostriction (~10{sup -8}) in amorphous state has been studied. The influence of external stresses leads to a sharp change in the character of the magnetization reversal curve, which was due to the change in the sign of the magnetostriction and the type of magnetic anisotropy. The amplitude of higher harmonics and the value of the magnetic impedance, respectively, are sensitive to mechanical stresses. Elastic stresses in the wires with a partial crystallization do not lead to a marked change in the magnetic properties; however, annealing can lead to a substantial increase in the axial magnetic anisotropy of the wires existing in the stressed state. The experimental results are analyzed in the framework of a magnetostriction model of induced magnetic anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Effect of atom substitutions on the magnetic properties in Ce 2 Fe 17 : Toward permanent magnet applications

Due to the rapidly developing technologies and huge market demand, there has been increasing interest internationally in exploring permanent magnet formulations in addition to the well-known Nd 2 Fe 14 B and SmCo 5 /Sm 2 Co 17 . Given Fe's low materials cost and generally high magnetization, Fe-rich rare earth binaries such as Ce 2 Fe 17 comprise a rich “hunting ground” for such new materials. While this compound suffers from a low ordering point and is a heli magnet, these difficulties are easily remedied by the substitution of appropriate amounts of cobalt for Fe, with room-temperature saturation magnetization as high as 1.5 T. In this work, we try to switch the all-important magnetic anisotropy from planar to uniaxial behavior in Ce 2 Fe 17 via 18 h - and 6 c -type atom substitutions with Si, Ir, and numerous other atoms. The uniaxial magnetocrystalline anisotropy is successfully achieved in the 6 c -site-substituted Ce 2 Fe 15 Ir 2 systems, along with large magnetization. We find that iridium substitution, in particular, induces a substantial uniaxial anisotropy of 11.25 MJ/m 3 , which is comparable to most of the current rare earth permanent magnets. Although the iridium substitution is costly, the finding of Ir-triggered uniaxial magnetic anisotropy indicates the potential of Ce–Fe-based alloys for permanent magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Conceptual magnet design study for fusion nuclear science facility [Magnet design study for fusion nuclear science facility]

The Fusion Nuclear Science Facility (FNSF) is a nuclear confinement device to provide the integrated fusion environment with fusion reactor components. The FNSF is the stepping stone to bridge the technical gaps of burning plasma and nuclear science between the International Thermal Nuclear Experimental Reactor (ITER), currently under construction in the south of France, and the demonstration power plant (DEMO). For the next-step fusion reactors, resistive copper magnet cannot be a sustainable solution due to large power consumption in coils of large size needed. Both Low temperature superconductor (LTS) and high temperature superconductor (HTS) are considered for the FNSF magnet design based on the state-of-the-art fusion superconducting magnet technology. Input parameters to FNSF magnet design include magnetic field of 7.5 T at plasma center with a major radius of 4.8 m and minor radius of 1.2 m, and a peak field of over 16 T on the TF coils. The high magnetic field can be achieved by using the high performance ternary Restack Rod Process (RRP) Nb3Sn strands for toroidal field (TF) magnets and a high aspect ratio rectangular cable-in-conduit conductor (CICC) design. The conductor design concept and TF coil winding pack composition and dimension are discussed based on the horizontal maintenance scheme. Neutron radiation limits for the LTS and HTS conductors and electrical insulation materials are reviewed based on the available materials previously tested. The material radiation limits for FNSF magnets are defined as part of the conceptual design studies. In conclusion, the global structural analysis of FNSF magnets based on the radial build was performed to validate feasibility for the plant layout toward horizontal maintenance and global structural integrity of its magnet system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Towards developing a compact model for magnetization switching in straintronics magnetic random access memory devices

Strain-mediated magnetization switching in a magnetic tunneling junction (MTJ) by exploiting a combination of piezoelectricity and magnetostriction has been proposed as an energy efficient alternative to spin transfer torque (STT) and field induced magnetization switching methods in MTJ-based magnetic random access memories (MRAM). Theoretical studies have shown the inherent advantages of strain-assisted switching, and the dynamic response of the magnetization has been modeled using the Landau-Lifshitz-Gilbert (LLG) equation. However, an attempt to use LLG for simulating dynamics of individual elements in large-scale simulations of multi-megabyte straintronics MRAM leads to extremely time-consuming calculations. Hence, a compact analytical solution, predicting the flipping delay of the magnetization vector in the nanomagnet under stress, combined with a liberal approximation of the LLG dynamics in the straintronics MTJ, can lead to a simplified model of the device suited for fast large-scale simulations of multi-megabyte straintronics MRAMs. In this work, a tensor-based approach is developed to study the dynamic behavior of the stressed nanomagnet. First, using the developed method, the effect of stress on the switching behavior of the magnetization is investigated to realize the margins between the underdamped and overdamped regimes. The latter helps the designer realize the oscillatory behavior of the magnetization when settling along the minor axis, and the dependency of oscillations on the stress level and the damping factor. Next, a theoretical model to predict the flipping delay of the magnetization vector is developed and tested against LLG-based numerical simulations to confirm the accuracy of findings. Lastly, the obtained delay is incorporated into the approximate solutions of the LLG dynamics, in order to create a compact model to liberally and quickly simulate the magnetization dynamics of the MTJ under stress. Using the developed delay equation, the efficiency of the straintronics switching over the STT method is highlighted by analytically investigating the energy-delay trade-off of both methodologies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Multi-$\mathcal{k}$ magnetic structure and large anomalous Hall effect in candidate magnetic Weyl semimetal NdAlGe

Here, the magnetic structure, magnetoresistance (MR), and Hall effect of the noncentrosymmetric magnetic semimetal NdAlGe are investigated, revealing an unusual magnetic state and anomalous transport properties that are associated with the electronic structure of this compound. The magnetization and MR measurements are both highly anisotropic and indicate an Ising-like magnetic system. The magnetic structure is complex in that it involves two magnetic ordering vectors, including an incommensurate spin density wave and commensurate ferrimagnetic state in zero field. We have discovered a large anomalous Hall conductivity that reaches ≈430 Ω –1 cm –1 , implying that it originates from an intrinsic Berry curvature effect stemming from Weyl nodes found in the electronic structure. These electronic structure calculations indicate the presence of nested Fermi surface pockets with nesting wave vectors like the measured magnetic ordering wave vector and the presence of Weyl nodes in proximity to the Fermi surface. We associate the incommensurate magnetic structure with the large anomalous Hall response to be the result of the combination of Fermi surface nesting and the Berry curvature associated with Weyl nodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Application of a new model of residual magnetization of iron for calculating the deflecting magnet of an accelerator

Allowing for residual magnetization of iron is necessary when calculating the magnetic field of elements of electron-optical channels in charged-particle accelerators because the contribution of residual magnetization to the field in the gap can be on the order of mT. Moreover, the magnitude and sign of this contribution depend on the magnetization process. Earlier, we proposed a model of residual magnetization of iron with the use of a small number of magnetic domain types. Here, an algorithm for magnetic-field calculation with the use of this model is described. The ability of the algorithm was demonstrated for the case of a simplest electromagnet with an O-shaped magnetic circuit. Comparison with the measurement results demonstrated a satisfactory accuracy of allowing for residual magnetization.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Milli-magnetic monopole dark matter and the survival of galactic magnetic fields

A bstract Dark sectors with Abelian gauge symmetries can interact with ordinary matter via kinetic mixing. In such scenarios, magnetic monopoles of a broken dark U(1) will appear in our sector as confined milli-magnetically charged objects under ordinary electromagnetism. Halo ellipticity constraints are shown to significantly bound the strength of dark magnetic Coulomb monopole interactions. The bound magnetic monopole ground state, which in vacuum is stable and has no magnetic charge or moment, is shown to become quantum mechanically unstable in the presence of an external, ordinary magnetic field. If these states contribute sizably to the local dark matter density, they extract significant energy from the galactic magnetic field. We revise and extend this “Parker Bound” on galactic magnetic energy loss to milli-magnetic monopoles which leads to the strongest existing constraints on these states, satisfying our halo ellipticity bounds, over a wide range of magnetic monopole masses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗