Search NASA⌕ Search

SEARCH · Search NASA

Results for “MIXING LENGTH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Turbulent boundary-layer velocity profiles on a nonadiabatic at Mach number 6.5

Velocity profiles were obtained from pitot-pressure and total-temperature measurements within a turbulent boundary layer on a large sharp-edged flat plate. Momentum-thickness Reynolds number ranged from 2590 to 8860 and wall-to-adiabatic-wall temperature ratios ranged from 0.3 to 0.5. Measurements were made both with and without boundary layer trips. Five methods are evaluated for correlating the measured velocity profiles with the incompressible law-of-the-wall and the velocity defect law. The mixing-length generalization of Van Driest gives the best correlation.

Keener, E. R.↗
NASA NTRS1971

Experimental hydrodynamics of the accelerated turbulent boundary layer with and without mass injection.

Mean velocity-profile data are reported for blown, unblown, and sucked accelerated turbulent boundary layers. The pressure gradients investigated are those corresponding to constant values of the pressure-gradient parameter. The results obtained indicate that acceleration apparently causes an increase in the thickness of the viscous sublayer. Blowing opposes this effect, while suction enhances it. It seems evident that strong acceleration and/or strong suction will lead to a complete laminarization of the boundary layer. An empirical correlation of the data is presented in the form of a tabular correlation of the damping constant in the van Driest (1956) mixing-length hypothesis.

Julien, H. L.↗
NASA NTRS1972

Convective envelopes and radial pulsation of massive red supergiants.

A grid of convective envelope models covering a wide range of astrophysical parameters has been constructed for M-type supergiants with the help of theoretical evolutionary tracks, mixing-length theory, and the inclusion of hydrogen and helium ionization zones. Linear adiabatic pulsation theory has been used to obtain the first four normal modes of radial pulsation for all the models. All the convective envelopes are found to be dynamically stable. The theoretical pulsation calculations confirm that the primary observed period in variable M-type supergiants is probably due to the fundamental mode of radial pulsation.

Stothers, R.↗
NASA NTRS1972

A theoretical study of mixing downstream of transverse injection into a supersonic boundary layer

A theoretical and analytical study was made of mixing downstream of transverse hydrogen injection, from single and multiple orifices, into a Mach 4 air boundary layer over a flat plate. Numerical solutions to the governing three-dimensional, elliptic boundary layer equations were obtained using a general purpose computer program. Founded upon a finite element solution algorithm. A prototype three-dimensional turbulent transport model was developed using mixing length theory in the wall region and the mass defect concept in the outer region. Excellent agreement between the computed flow field and experimental data for a jet/freestream dynamic pressure ratio of unity was obtained in the centerplane region of the single-jet configuration. Poorer agreement off centerplane suggests an inadequacy of the extrapolated two-dimensional turbulence model. Considerable improvement in off-centerplane computational agreement occured for a multi-jet configuration, using the same turbulent transport model.

Baker, A. J.↗
NASA NTRS1973

On the possibility of constructing a radiative sunspot model in magnetohydrostatic equilibrium.

It is currently believed that it is impossible to construct a radiative sunspot model in magnetohydrostatic equilibrium unless magnetic fields below the surface are excessively large (greater than 100 kG). This belief is based on results obtained using the mixing length theory of convection. We wish to point out that by using a different theory of convection, due to Opik (1950), it is possible to compute a radiative sunspot model in which the field becomes no greater than 9000 G. By applying two boundary conditions (depth of spot equals depth of convection zone, and magnetic field has zero gradient at the base of the spot) we show that a radiative spot has a unique effective temperature for a given Wilson depression.

Mullan, D. J.↗
NASA NTRS1973

Experimental and analytical study of a conically diffused flow with a nearly separated boundary layer

Turbulence measurements were obtained in the nearly separated flow in a 13 deg total angle of divergence conical diffuser coupled to a constant area tailpipe. Air at 207 newtons per square centimeter and 308 K provided an inlet velocity of about 51 meters per second at an inlet unit Reynolds number of 63.7 million per meter. Very high longitudinal turbulence intensities accompanied the diffusion process with peak values approaching 40 percent when normalized by the local centerline velocity. Predictions of the pressure recovery coefficient using a mixing length concept were good in the early stages of diffusion. In the latter stages of diffusion satisfactory predictions of the pressure recovery were obtained with an empirical method.

Boldman, D. R.↗
NASA NTRS1974

The differential rotation of the solar surface

The large-scale flow in the solar convection zone is discussed. The objective is to deduce from observation the principal physical balances in the governing equations. The simplest set of equations that seem potentially realistic are utilized. It is assumed that magnetic fields are negligible, that mixing-length theory gives an accurate representation of the mean structure, and that rigid-body rotation exists at the base. It is deduced that the zonal glow is geostrophic, the meridional flow is controlled by friction, and diffusive heating balances advective cooling due to vertical motion. Next, a detailed calculation of the latitude profile of surface angular velocity is performed, based on approximate equations containing only the principal balances, and agrees well with observation. Finally, it is demonstrated that the amplitude of the flow may be determined by the constraint that the net equatorward angular momentum flux vanish. The conclusions are consistent with the hypothesis that the flow is primarily a single large axisymmetric convection cell in each hemisphere.

Gierasch, P. J.↗
NASA NTRS1974

Numerical simulation of high Reynolds number transonic flows

A code has been developed for simulating high Reynolds number transonic flow fields of arbitrary configuration. An explicit finite-difference method with time splitting is used to solve the time-dependent equations for compressible turbulent flow. A nonorthogonal computational mesh of arbitrary configuration facilitates the description of the flow field. The code is applied to simulate the flow over an 18 percent thick circular-arc biconvex airfoil at zero angle of attack and free-stream Mach number of 0.775. A simple mixing-length model is used to describe the turbulence and chord Reynolds numbers of 1, 2, 4, and 10 million are considered. The solution describes in sufficient detail both the shock-induced and trailing-edge separation regions, and provides the profile and friction drag.

Deiwert, G. S.↗
NASA NTRS1975

Turbulence processes and simple closure schemes

The closure problem in turbulence is reviewed, and some simple closure schemes are introduced. Processes occurring in turbulent flow are discussed on the basis of solutions for some elementary flows such as homogeneous turbulence with and without uniform shear. Closure by specification of initial conditions, and finally practical closure schemes for more complicated flows are considered. The latter include Reynolds stress, eddy viscosity, and mixing-length closures.

Deissler, R. G.↗
NASA NTRS1975

Numerical techniques for the solution of the compressible Navier-Stokes equations and implementation of turbulence models

The time-splitting explicit numerical method of MacCormack is applied to separated turbulent boundary layer flow problems. Modifications of this basic method are developed to counter difficulties associated with complicated geometry and severe numerical resolution requirements of turbulence model equations. The accuracy of solutions is investigated by comparison with exact solutions for several simple cases. Procedures are developed for modifying the basic method to improve the accuracy. Numerical solutions of high-Reynolds-number separated flows over an airfoil and shock-separated flows over a flat plate are obtained. A simple mixing length model of turbulence is used for the transonic flow past an airfoil. A nonorthogonal mesh of arbitrary configuration facilitates the description of the flow field. For the simpler geometry associated with the flat plate, a rectangular mesh is used, and solutions are obtained based on a two-equation differential model of turbulence.

Baldwin, B. S.↗
NASA NTRS1975

Computation of separated transonic turbulent flows

The two-dimensional Reynolds-averaged compressible Navier-Stokes equations are solved using MacCormack's second-order-accurate explicit finite difference method to simulate the separated transonic turbulent flow field over an airfoil. Four different algebraic eddy viscosity models are tested for viability to achieve turbulence closure for the class of flows considered. These models range from an unmodified boundary-layer mixing-length model to a relaxation model incorporating special considerations for the separation bubble region. Results of this study indicate the necessity for special attention to the separated flow region and suggest limits of applicability of algebraic turbulence models to these separated flow fields.

Deiwert, G. S.↗
NASA NTRS1975

Turbulence processes and simple closure schemes

The closure problem in turbulence is briefly reviewed, and some simple closure schemes are introduced. Processes occurring in turbulent flow are discussed on the basis of solutions for some elementary flows such as homogeneous turbulence with and without uniform shear. Closure by specification of initial conditions, and finally practical closure schemes for more complicated flows (e.g., pipe flows) are considered briefly. The latter include Reynolds stress, eddy viscosity, and mixing-length closures.

Deissler, R. G.↗
NASA NTRS1975

Application of a general boundary layer analysis to turbulent boundary layers subjected to strong favorable pressure gradients

Theoretical predictions of turbulent boundary layer development under the influence of strong favorable pressure gradients made using a finite-difference calculation procedure are compared to experimental data. Comparisons are presented for low speed flows with and without wall heat transfer as well as for supersonic flows with adiabatic walls. The turbulence model used is governed by an integral form of the turbulence kinetic energy equation and the results are compared with predictions made using a conventional equilibrium turbulence model based upon Prandtl's mixing length, a Clauser-type eddy viscosity model used by Cebecci and Mosinskis, and a two-equation turbulence energy model of Launder and Jones.

Kreskovsky, J. P.↗
NASA NTRS1975

Analysis of atmospheric flow over a surface protrusion using the turbulence kinetic energy equation

Atmospheric flow fields resulting from a semi-elliptical surface obstruction in an otherwise horizontally homogeneous statistically stationary flow are modelled with the boundary-layer/Boussinesq-approximation of the governing equation of fluid mechanics. The turbulence kinetic energy equation is used to determine the dissipative effects of turbulent shear on the mean flow. Mean-flow results are compared with those given in a previous paper where the same problem was attacked using a Prandtl mixing-length hypothesis. Iso-lines of turbulence kinetic energy and turbulence intensity are plotted in the plane of the flow. They highlight regions of high turbulence intensity in the stagnation zone and sharp gradients in intensity along the transition from adverse to favourable pressure gradient.

Frost, W.↗
NASA NTRS1975

Calculation of three-dimensional compressible laminar and turbulent boundary layers. An implicit finite-difference procedure for solving the three-dimensional compressible laminar, transitional, and turbulent boundary-layer equations

An implicit finite-difference procedure is presented for solving the compressible three-dimensional boundary-layer equations. The method is second-order accurate, unconditionally stable (conditional stability for reverse cross flow), and efficient from the viewpoint of computer storage and processing time. The Reynolds stress terms are modeled by (1) a single-layer mixing length model and (2) a two-layer eddy viscosity model. These models, although simple in concept, accurately predicted the equilibrium turbulent flow for the conditions considered. Numerical results are compared with experimental wall and profile data for a cone at an angle of attack larger than the cone semiapex angle. These comparisons clearly indicate that the numerical procedure and turbulence models accurately predict the experimental data with as few as 21 nodal points in the plane normal to the wall boundary.

Harris, J. E.↗
NASA NTRS1975

Nonreactive mixing study of a scramjet swept-strut fuel injector

The results are presented of a cold-mixing investigation performed to supply combustor design information and to determine optimum normal fuel-injector configurations for a general scramjet swept-strut fuel injector. The experimental investigation was made with two swept struts in a closed duct at a Mach number of 4.4 and a nominal ratio of jet mass flow to air mass flow of 0.0295, with helium used to simulate hydrogen fuel. Four injector patterns were evaluated; they represented the range of hole spacing and the ratio of jet dynamic pressure to free-stream dynamic pressure. Helium concentration, pitot pressure, and static pressure in the downstream mixing region were measured to generate the contour plots needed to define the mixing-region flow field and the mixing parameters. Experimental results show that the fuel penetration from the struts was less than the predicted values based on flat-plate data; but the mixing rate was faster and produced a mixing length less than one-half that predicted.

Mcclinton, C. R.↗
NASA NTRS1976

Computation of turbulent boundary layers on curved surfaces, 1 June 1975 - 31 January 1976

An accurate method was developed for predicting effects of streamline curvature and coordinate system rotation on turbulent boundary layers. A new two-equation model of turbulence was developed which serves as the basis of the study. In developing the new model, physical reasoning is combined with singular perturbation methods to develop a rational, physically-based set of equations which are, on the one hand, as accurate as mixing-length theory for equilibrium boundary layers and, on the other hand, suitable for computing effects of curvature and rotation. The equations are solved numerically for several boundary layer flows over plane and curved surfaces. For incompressible boundary layers, results of the computations are generally within 10% of corresponding experimental data. Somewhat larger discrepancies are noted for compressible applications.

Wilcox, D. C.↗
NASA NTRS1975

The relativistic equations of stellar structure and evolution

The general relativistic equations of stellar structure and evolution are reformulated in a notation which makes easy contact with Newtonian theory. A general relativistic version of the mixing-length formalism for convection is presented. It is argued that in work on spherical systems, general relativity theorists have identified the wrong quantity as total mass-energy inside radius r.

Thorne, K. S.↗