Search NASA⌕ Search

SEARCH · Search NASA

Results for “Magnetic Device”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Ultrafast Switching of Interfacial Thermal Conductance

Dynamical control of thermal transport at the nanoscale provides a time-domain strategy for optimizing thermal management in nanoelectronics, magnetic devices, and thermoelectric devices. However, the rate of change available for thermal switches and regulators is limited to millisecond time scales, calling for a faster modulation speed. Here, in this work, time-resolved X-ray diffraction measurements and thermal transport modeling reveal an ultrafast modulation of the interfacial thermal conductance of an FeRh/MgO heterostructure as a result of a structural phase transition driven by optical excitation. Within 90 ps after optical excitation, the interfacial thermal conductance is reduced by a factor of 5 and lasts for a few nanoseconds, in comparison to the value at the equilibrium FeRh/MgO interface. The experimental results combined with thermal transport calculations suggest that the reduced interfacial thermal conductance results from enhanced phonon scattering at the interface where the lattice experiences transient in-plane biaxial stress due to the structural phase transition of FeRh. Our results suggest that optically driven phase transitions can be utilized for ultrafast nanoscale thermal switches for device application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

To Substitute Rather Than Intercalate: Chimie douce Approach to Induce Ferromagnetism in Metastable Pt 0.8 M 0.2 Se 2 ( M = Cr, Co, Ni)

Two-dimensional (2D) magnetic materials with exotic magnetic properties have garnered significant interest due to their potential applications in spintronics and data storage technologies. However, the limited availability of intrinsic 2D magnetic materials has driven efforts to induce and manipulate magnetism in otherwise nonmagnetic 2D systems through approaches such as chemical intercalation, defect engineering, and substitutional doping. Herein, we present a facile, chimie douce method for incorporating 3d transition metals (Cr, Co, and Ni) into the nonmagnetic PtSe 2 sublattice. This synthetic approach enables control over layer thickness of Pt 1–x M x Se 2 (M = Cr, Co, Ni) nanosheets by varying the M identity and annealing conditions. Comprehensive scattering and spectroscopic characterizations confirm the successful and homogeneous substitution of M atoms at the Pt site, rather than intercalation, and reveal a strong correlation between nanosheet thickness and the identity of the substituting metal. High-temperature annealing of the nanosheets promotes an irreversible transformation toward the bulk phase, allowing for detailed characterization of structural and magnetic properties. A case study of Pt 0.8 Cr 0.2 Se 2 reveals that nanosheet thickness plays a critical role in modulating local magnetic interactions. While Cr atoms in the as-synthesized few-layers-thick nanosheets exhibit predominantly short-range antiferromagnetic interactions, the emergence of short-range ferromagnetic exchange is revealed in the bulk material. Detailed ac susceptibility and remanent magnetization measurements further demonstrate that bulk Pt 0.8 Cr 0.2 Se 2 adopts a frustrated magnetic ground state with clear signatures of ferromagnetic cluster-glass behavior. The systematic investigation presented herein establishes a clear and robust protocol for the synthesis and in-depth characterization of 2D transition-metal-substituted PtSe2 materials with varying layer thickness and paves a path toward their realization in spintronic and magnetic device applications.

crystallinity↗
DOE OSTI2023

Hybrid spin Hall nano-oscillators based on ferromagnetic metal/ferrimagnetic insulator heterostructures

Abstract Spin-Hall nano-oscillators (SHNOs) are promising spintronic devices to realize current controlled GHz frequency signals in nanoscale devices for neuromorphic computing and creating Ising systems. However, traditional SHNOs devices based on transition metals have high auto-oscillation threshold currents as well as low quality factors and output powers. Here we demonstrate a new type of hybrid SHNO based on a permalloy (Py) ferromagnetic-metal nanowire and low-damping ferrimagnetic insulator, in the form of epitaxial lithium aluminum ferrite (LAFO) thin films. The superior characteristics of such SHNOs are associated with the excitation of larger spin-precession angles and volumes. We further find that the presence of the ferrimagnetic insulator enhances the auto-oscillation amplitude of spin-wave edge modes, consistent with our micromagnetic modeling. This hybrid SHNO expands spintronic applications, including providing new means of coupling multiple SHNOs for neuromorphic computing and advancing magnonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Configurable antiferromagnetic domains and lateral exchange bias in atomically thin CrPS 4

Interfacial exchange coupling between antiferromagnets (AFMs) and ferromagnets (FMs) crucially makes it possible to shift the FM hysteresis, known as exchange bias, and to switch AFM states. Two-dimensional magnets unlock opportunities to combine AFM and FM materials; however, the buried AFM–FM interfaces obtained by stacking remains challenging to understand. Here, in this work, we demonstrate interfacial control via intralayer exchange coupling in the layered AFM CrPS 4 , where connected even and odd layers realize pristine lateral interfaces between AFM-like and FM-like regions. We distinguish antiphase even-layer states by scanning nitrogen-vacancy centre magnetometry due to a weak surface magnetization. This surface magnetization enables control over the even-layer state, with different regions switching at distinct fields due to their own lateral couplings. We toggle three AFM domains adjacent to a FM-like region and demonstrate a tunable multilevel exchange bias. Our nanoscale visualization unveils the microscopic origins of exchange bias and advances single two-dimensional crystals for hybrid AFM–FM technologies.

magnetic devices↗
DOE OSTI2022

Reconfigurable training and reservoir computing in an artificial spin-vortex ice via spin-wave fingerprinting

Strongly interacting artificial spin systems are moving beyond mimicking naturally occurring materials to emerge as versatile functional platforms, from reconfigurable magnonics to neuromorphic computing. Typically, artificial spin systems comprise nanomagnets with a single magnetization texture: collinear macrospins or chiral vortices. Here, by tuning nanoarray dimensions we have achieved macrospin–vortex bistability and demonstrated a four-state metamaterial spin system, the ‘artificial spin-vortex ice’ (ASVI). ASVI can host Ising-like macrospins with strong ice-like vertex interactions and weakly coupled vortices with low stray dipolar field. Vortices and macrospins exhibit starkly differing spin-wave spectra with analogue mode amplitude control and mode frequency shifts of Δf = 3.8 GHz. The enhanced bitextural microstate space gives rise to emergent physical memory phenomena, with ratchet-like vortex injection and history-dependent non-linear fading memory when driven through global magnetic field cycles. We employed spin-wave microstate fingerprinting for rapid, scalable readout of vortex and macrospin populations, and leveraged this for spin-wave reservoir computation. ASVI performs non-linear mapping transformations of diverse input and target signals in addition to chaotic time-series forecasting.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Twist-assisted all-antiferromagnetic tunnel junction in the atomic limit

Abstract Antiferromagnetic spintronics 1,2 shows great potential for high-density and ultrafast information devices. Magnetic tunnel junctions (MTJs), a key spintronic memory component that are typically formed from ferromagnetic materials, have seen rapid developments very recently using antiferromagnetic materials 3,4 . Here we demonstrate a twisting strategy for constructing all-antiferromagnetic tunnel junctions down to the atomic limit. By twisting two bilayers of CrSBr, a 2D antiferromagnet (AFM), a more than 700% nonvolatile tunnelling magnetoresistance (TMR) ratio is shown at zero field (ZF) with the entire twisted stack acting as the tunnel barrier. This is determined by twisting two CrSBr monolayers for which the TMR is shown to be derived from accumulative coherent tunnelling across the individual CrSBr monolayers. The dependence of the TMR on the twist angle is calculated from the electron-parallel momentum-dependent decay across the twisted monolayers. This is in excellent agreement with our experiments that consider twist angles that vary from 0° to 90°. Moreover, we also find that the temperature dependence of the TMR is, surprisingly, much weaker for the twisted as compared with the untwisted junctions, making the twisted junctions even more attractive for applications. Our work shows that it is possible to push nonvolatile magnetic information storage to the atomically thin limit.

Science & Technology - Other Topics↗
DOE OSTI2020

Interfacial spin–orbit torques

Spin–orbit torques offer a promising mechanism for electrically controlling magnetization dynamics in nanoscale heterostructures. While spin–orbit torques occur predominately at interfaces, the physical mechanisms underlying these torques can originate in both the bulk layers and at interfaces. Classifying spin–orbit torques based on the region that they originate in provides clues as to how to optimize the effect. While most bulk spin–orbit torque contributions are well studied, many of the interfacial contributions allowed by symmetry have yet to be fully explored theoretically and experimentally. To facilitate progress, we review interfacial spin–orbit torques from a semiclassical viewpoint and relate these contributions to recent experimental results. In this study, we show the relationship between different interface transport parameters within the same model. For charges and spins flowing perpendicular to the interface, interfacial spin–orbit coupling both modifies the mixing conductance of the magnetoelectronic circuit theory and gives rise to spin memory loss. For in-plane electric fields, interfacial spin–orbit coupling gives rise to torques described by spin–orbit filtering, spin swapping, and precession. In addition, these same interfacial processes generate spin currents that flow into the non-magnetic layer. For in-plane electric fields in trilayer structures, the spin currents generated at the interface between one ferromagnetic layer and the non-magnetic spacer layer can propagate through the non-magnetic layer to produce novel torques on the other ferromagnetic layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Long plasma duration operation analyses with an international multi-machine (tokamaks and stellarators) database

Combined high-fusion performance and long-pulse operation is one of the key integration challenges for fusion energy development in magnetic devices. Addressing these challenges requires an integrated vision of physics and engineering aspects with the purpose of simultaneously increasing time duration and fusion performance. Significant progress has been made in tokamaks and stellarators, including very recent achievement in duration and/or performance. This progress is reviewed by analyzing the experimental data (109 plasma pulses with a total of 3200 data points, i.e. on average 29 data per pulse) provided by ten tokamaks (in alphabetical order: Axially Symmetric Divertor Experiment Upgrade, DIII-D, Experimental Advanced Superconducting Tokamak, Joint European Torus, JT-60 Upgrade, Korea Superconducting Tokamak Advanced Research, tokamak à configuration variable, Tokamak Fusion Test Reactor, Tore Supra, W Environment in Steady-State Tokamak) and two stellarators (Large Helical Device and Wendelstein 7-X) expanding the pioneering work of Kikuchi (Kikuchi M. and Azumi M. 2015 Frontiers in Fusion Research II: Introduction to Modern Tokamak Physics (Springer)). Data have been gathered up to January 2022 and coordination has been provided by the recently created International Energy Agency-International Atomic Energy Agency international Coordination on International Challenges on Long duration OPeration group. By exploiting the multi-machine international database, recent progress in terms of injected energies (e.g. 1730 MJ in L-mode, 425 MJ in H-mode), durations (1056 s in L-mode, 101 s in H-mode), injected powers, and sustained performance will be reviewed. Progress has been made to sustain long-pulse operation in tokamaks and stellarators with superconducting coils, actively cooled components, and/or with metallic walls. The graph of the fusion triple products as a function of duration shows a dramatic reduction of, at least two orders of magnitude when increasing the plasma duration from less than 1 s to 100 s. Indeed, long-pulse operation is usually reached in dominant electron-heating modes at reduced density (current drive optimization) but with low ion temperatures ranging from 1 to 3 keV for discharges above 100 s. Difficulties in extending the duration may arise from coupling high heating powers over long durations and the evolving plasma-wall interaction towards an unstable operational domain. Possible causes limiting the duration and critical issues to be addressed prior to ITER operation and DEMO design are reported and analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Computation of high-frequency magnetoelastic waves in layered materials

Here, the direct calculation of magnetoelastic wave dispersion in layered media is presented using an efficient, accurate computational technique. The governing, coupled equations for elasticity and magnetism, the Navier and Landau-Lifshitz equations, respectively, are linearized to form a quadratic eigenvalue problem that determines a complex web of wave-number–frequency dispersion branches and their corresponding mode profiles. Numerical discretization of the eigenvalue problem via a spectral collocation method (SCM) is employed to determine the complete dispersion maps for both a single, finite-thickness magnetic layer and a finite magnetic-nonmagnetic double-layer. The SCM, previously used to study elastic waves in nonmagnetic media, is fast, accurate, and adaptable to a variety of sample configurations and geometries. Emphasis is placed on the extremely high-frequency regimes being accessed in ultrafast magnetism experiments. The dispersion maps and modes provide insight into how energy propagates through the coupled system, including how energy can be transferred between elastic- and magnetic-dominated waves as well as between different layers. The numerical computations for a single layer are further understood by a simplified analytical calculation in the high-frequency, exchange-dominated regime where the resonance condition required for energy exchange (an anticrossing) between quasi-elastic and quasi-magnetic dispersion branches is determined. Nonresonant interactions are shown to be well approximated by the dispersion of uncoupled elastic and magnetic waves. The methods and results provide fundamental theoretical tools to model and understand current and future magnetic devices powering spintronic innovation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Magnetic transition behavior in epitaxial Fe 47 Rh 47 Pd 6 films

The properties of Fe–Rh–Pd epitaxial thin films grown on MgO(001) were studied as a function of growth temperature. Films grown above 400°C exhibit a first-order antiferromagnetic to ferromagnetic magnetic phase transition with a transition temperature that decreases as the growth temperature is increased. The chemical order parameter computed from the ratio of intensities of the (001) and (002) diffraction peaks is nearly independent of the growth temperature, while the lattice constants change slightly. A comparison of our structural, magnetic, and electrical transport results with first-principle-based calculations as well as literature results indicates that the transition temperature of Fe–Rh-based alloy films depends sensitively on the lattice parameters and is of electronic origin. The transition temperature and its width can be tuned over a wide range by controlling the crystal structure via growth conditions or postdeposition annealing.

36 MATERIALS SCIENCE↗
NASA NTRS1972

New twisted intermetallic compound superconductor: A concept

Method for processing Nb3Sn and other intermetallic compound superconductors produces a twisted, stabilized wire or tube which can be used to wind electromagnetics, armatures, rotors, and field windings for motors and generators as well as other magnetic devices.

Coles, W. D.↗
NASA NTRS1973

Method of fabricating a twisted composite superconductor

A method of producing a twisted, stabilized wire or tube superconductor which can be used to wind electromagnets, armatures, rotors, field windings for motors and generators, and other magnetic devices which use a solenoid, toroidal, or other type winding is reported. At least one groove is formed along the length of a wire substrate which is then twisted into a helix and a layer of intermetallic superconducting material is formed in the groove. This layer can be formed by depositing the desired intermetallic compound into the groove or by diffusing one component of the superconductor into the groove formed in a substrate composed of the other component. The superconductor prepared by this method comprises a non-superconductor wire twisted into the shape of a helix, having at least one groove containing a layer of superconductor material along the length of the wire.

Brown, G. V.↗
NASA NTRS1979

Heat pipe cooling of power processing magnetics

The constant demand for increased power and reduced mass has raised the internal temperature of conventionally cooled power magnetics toward the upper limit of acceptability. The conflicting demands of electrical isolation, mechanical integrity, and thermal conductivity preclude significant further advancements using conventional approaches. However, the size and mass of multikilowatt power processing systems may be further reduced by the incorporation of heat pipe cooling directly into the power magnetics. Additionally, by maintaining lower more constant temperatures, the life and reliability of the magnetic devices will be improved. A heat pipe cooled transformer and input filter have been developed for the 2.4 kW beam supply of a 30-cm ion thruster system. This development yielded a mass reduction of 40% (1.76 kg) and lower mean winding temperature (20 C lower). While these improvements are significant, preliminary designs predict even greater benefits to be realized at higher power. This paper presents the design details along with the results of thermal vacuum operation and the component performance in a 3 kW breadboard power processor.

Hansen, I. G.↗
NASA NTRS1982

Component technology for space power systems

Progress made by NASA toward implementation of equipment for the conversion, management, and distribution of voltage power in space applications are reviewed. Work has been carried forward on components such as bipolar transistors, deep impurity semiconductors, conductors, dielectrics, magnetic devices, and rotary power transfer. Specific programs for the high voltage systems have included research on lightweight, low-cost conductors featuring graphite fibers containing electron donor materials for wires and cables with reduced mass and the conductivity of copper. Attention has also been given p-n junction technology for high-speed, high-current, high-voltage materials and diamond-like dielectric films which are hard, have high dielectric strength, and can operate up to 300 C. A transistor has been fabricated with a voltage of 1200 V at 100 A, with a gain of 10 and a 0.5 microsec rise/fall time. A 25 kW transformer has also been built which performs at 20 kHz with an efficiency of 99.2%.

Finke, R. C.↗
NASA NTRS1991

Stabilization of large space structures by linear reluctance actuators

Application of magnetic forces are considered for stabilization of vibrations of flexible space structures. Three electromagnetic phenomena are studied, such as: (1) magnetic body force; (2) reluctance torque; and (3) magnetostriction, and their application is analyzed for stabilization of a beam. The magnetic body force actuator uses the force that exists between poles of magnets. The reluctance actuator is configured in such a way that the reluctance of the magnetic circuit will be minimum when the beam is straight. Any bending of the beam increases the reluctance and hence generates a restoring torque that reduces bending. The gain of the actuator is controlled by varying the magnetizing current. Since the energy density of a magnetic device is much higher compared to piezoelectric or thermal actuators, it is expected that the reluctance actuator will be more effective in controlling the structural vibrations.

Biswas, Saroj K.↗
NASA NTRS1993

Goddard Conference on Mass Storage Systems and Technologies, Volume 1

Copies of nearly all of the technical papers and viewgraphs presented at the Goddard Conference on Mass Storage Systems and Technologies held in Sep. 1992 are included. The conference served as an informational exchange forum for topics primarily relating to the ingestion and management of massive amounts of data and the attendant problems (data ingestion rates now approach the order of terabytes per day). Discussion topics include the IEEE Mass Storage System Reference Model, data archiving standards, high-performance storage devices, magnetic and magneto-optic storage systems, magnetic and optical recording technologies, high-performance helical scan recording systems, and low end helical scan tape drives. Additional topics addressed the evolution of the identifiable unit for processing purposes as data ingestion rates increase dramatically, and the present state of the art in mass storage technology.

Kobler, Ben↗
NASA NTRS1993

Goddard Conference on Mass Storage Systems and Technologies, volume 2

Papers and viewgraphs from the conference are presented. Discussion topics include the IEEE Mass Storage System Reference Model, data archiving standards, high-performance storage devices, magnetic and magneto-optic storage systems, magnetic and optical recording technologies, high-performance helical scan recording systems, and low end helical scan tape drives. Additional discussion topics addressed the evolution of the identifiable unit for processing (file, granule, data set, or some similar object) as data ingestion rates increase dramatically, and the present state of the art in mass storage technology.

Kobler, Ben↗