Search NASA⌕ Search

SEARCH · Search NASA

Results for “Many-body theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Interlayer coupling in two-dimensional MoS 2 and phosphorene bilayers: Benchmark quantum Monte Carlo study of interaction energies and quasiparticle band gaps

Using high-accuracy many-body quantum Monte Carlo (QMC) methods, we study the effect of interlayer coupling on the properties of two-dimensional freestanding bilayers (BLs) of MoS 2 and phosphorene. The properties of the two BL-materials are very different and largely determined by the interlayer interaction, which is purely van der Waals in MoS 2 and partially electronic/chemical in phosphorene, resulting in a modest layer-dependent property modulation in MoS 2 and strong modulation in phosphorene. Multireference and symmetry considerations are used to construct state-of-the-art accuracy QMC trial wave functions. We determine the quasiparticle band gaps for both materials, $Δ^{\textrm{qp}}_{Γ→\textrm{K}}$ = 2.45 ± 0.05 eV in BL-MoS 2 and $Δ^{\textrm{qp}}_{Γ→Γ}$=1.59 ±0.1eV in BL-phosphorene. In conclusion, these benchmark band-gap values make it possible to consolidate the interpretation of the widely scattered experimental and theory data.

Huang, Yongda [Slovak Academy of Sciences (SAS), B↗
DOE OSTI2025

Controlled gate networks: theory and application to eigenvalue estimation

We introduce a new scheme for quantum circuit design called controlled gate networks. Rather than trying to reduce the complexity of individual unitary operations, the new strategy is to toggle between all of the unitary operations needed with the fewest number of gates. We present the general theory of controlled gate networks and show that, under quite general conditions, it can significantly reduce the number of two-qubit gates needed to produce linear combinations of unitary operators. The first example we consider is a variational subspace calculation for a two-qubit system. The second example is estimating the eigenvalues of a two-qubit Hamiltonian via the rodeo algorithm (Choi et al. in Phys Rev Lett 127(4):040505, 2021. https://doi.org/10.1103/PhysRevLett.127.040505) using operators that we call controlled reversal gates. We use the Quantinuum H1-2 and IBM Perth devices to realize the quantum circuits. The third example is the application of controlled gate networks to the controlled time evolution of a free nucleon on a three-dimensional lattice. For all of the examples, we show very substantial reductions in the number of two-qubit gates required. Our work demonstrates that controlled gate networks are a useful tool for reducing gate complexity in quantum algorithms for quantum many-body problems such as those relevant to nuclear physics.

Bee-Lindgren, Max [Georgia Institute of Technology↗
DOE OSTI2026

Universality of Shallow Global Quenches in Critical Spin Chains

Measuring universal data in the strongly correlated regime of quantum critical points remains a fundamental objective for quantum simulators. In foundational work, Calabrese and Cardy demonstrated how these data govern the dynamics of certain global quenches to 1+1-dimensional conformal field theories. While the quasiparticle picture they introduce has been widely successful in both theory and experiment, their seminal prediction that the critical exponents are simply encoded in the relaxation rates of local observables is challenging to investigate experimentally. In this Letter, we examine the critical quench dynamics of local observables from two types of readily accessible initial conditions: ground states and finite-temperature ensembles. Here, we identify universal scaling collapses and scaling functions, utilizing a combination of conformal perturbation theory and tensor network numerics. For the finite-temperature quenches, we determine a regime in which the conformal field theory results are recovered, thereby allowing universal quantum critical data to be extracted from realistic quenches.

Quantum many-body systems↗
DOE OSTI2026

Monitored Fluctuating Hydrodynamics

We introduce a hydrodynamic framework for describing monitored classical stochastic processes. We study the conditional ensembles for these monitored processes—i.e., we compute spacetime correlation functions conditioned on a fixed, typical measurement record. In the presence of global symmetries we show that these conditional ensembles can undergo measurement-induced “sharpening” phase transitions as a function of the monitoring rate; moreover, even weak monitoring can give rise to novel critical phases, derived entirely from a classical perspective. We give a simple hydrodynamic derivation of the known “charge-fuzzy phase” for weakly monitored diffusive many-body quantum systems. We show that although the unmonitored symmetric and asymmetric exclusion processes are in different universality classes of transport, the fluctuations in their conditional ensembles flow to the same fixed point with emergent relativistic invariance under monitoring. On the other hand, weakly monitored systems with non-Abelian symmetries enter a novel strongly coupled fixed point with nontrivial dynamical exponent, which we characterize. Our formalism naturally accounts for monitoring general observables, such as currents or density gradients, and allows for a direct calculation of information-theoretic diagnostics of sharpening transitions, including the Shannon entropy of the measurement record.

classical statistical mechanics↗
DOE OSTI2026

From Quantum Time to Manifestly Covariant QFT: On the Need for a Quantum-Action-Based Quantization

In quantum time (QT) schemes, time is promoted to a degree of freedom, allowing Lorentz covariance to be made explicit for single particles. We ask whether this can be lifted to QFT so that Lorentz covariance becomes manifest at the Hilbert-space level, rather than being hidden as in the standard canonical formulation. We address this question by proposing a second-quantized approach in which the elementary particle is the QT particle itself, leading naturally to the notion of spacetime field algebras and of quantum action. We show, however, that a naive many-body construction runs into inconsistencies. To pinpoint their origin we introduce a classical counterpart of the second-quantized formalism, spacetime classical mechanics (SCM), and prove a no-go theorem: Dirac quantization of SCM collapses back to standard QFT and therefore hides covariance. We circumvent this problem by presenting a quantum-action-based quantization that yields a spacetime version of quantum mechanics (SQM), making covariance manifest for (interacting) QFTs. Finally, we show that this resolution is tied to a genuine spacetime generalization of the notion of a quantum state, required by causality and closely connected to recent “states over time” proposals and, in dS/CFT–motivated settings, to microscopic notions of timelike entanglement and emergent time.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Tunable Few-Layer van der Waals Crystals and Heterostructures as Emerging Energy and Quantum Materials (Final Technical Report)

2D and layered (van der Waals) semiconductors offer extraordinary opportunities for manipulating optically excited charge carriers, many-body excitations, and non-charge based quantum numbers. To date, research has focused on a limited group of materials, mostly transition metal dichalcogenides in the monolayer limit. Other van der Waals semiconductors, and especially few-layer to multilayer crystals and their heterostructures, carry large potential for the discovery of phenomena of interest for future energy and information technologies. But they remain largely unexplored, often due to a lack of access to high-quality materials and approaches for measuring their properties at the relevant scales. The goal of this project was to develop an EPSCoR-State/National Laboratory Partnership that addresses the challenges of preparing high-quality van der Waals semiconductors and of probing their structure, composition, and especially their optoelectronic and photonic properties, near the atomic scale using electron microscopy techniques. A central component of the project was the development of advanced methods for electron microscopy and electron-excited spectroscopy, taking advantage of unique samples as well as leading capabilities and expertise at the partner institutions. Efforts to advance leading-edge techniques was supported by ancillary developments, such as precision sample preparation for electron microscopy/spectroscopy, coordinated chemical imaging, and analytical electron microscopy. Experiments in materials synthesis and technique development were closely linked to theory and computation. The results obtained under this project yielded multifaceted benefits to the involved partners and their institutions, DOE-BES, the wider scientific community, and society at large, particularly in the State of Nebraska through dividends from knowledge and human capital generated under the project.

36 MATERIALS SCIENCE↗
DOE OSTI2025

HfZr_BCC_SolidSolution_128atoms_VASP6

We performed density functional theory (DFT) calculations for body-centered-cubic (BCC) structures with 128 lattices sites of solid solution binary alloys hafnium-zirconium (Hf-Zr). The electronic structures of alloys have been calculated using Vienna Ab initio Simulation Package (VASP). Within this package the DFT approach is used to reduce many-body Schrodinger equation to set of single particle Kohn-Sham (KS) equations. The generalized electronic exchange-correlation functional is described by generalized gradient approximation with the Perdew-Burke-Ernzerhof parametrization. The electron-ion interactions is described by pseudopotentials developed within the plane-wave basis projector augmented-wave (PAW) approach. These pseudopotentials are available at the VASP portal (http://cms.mpi.univie.ac.at/vasp/). Our calculations have been run with the pseudopotentials treating s and p semi-core states as valence in case for the elements Hf and Zr. The electronic densities and potentials are expanded over plane-waves with energy cutoff of 350 eV. 2x2x2 k-mesh and normal precision were used. The alloys were modeled by supercell containing 128 randomly distributed atoms. At initial step the atoms occupy perfect bcc lattice cites. This initial structure was optimized until energy changes less than 1e-6 eV, while forces acting on atoms don't exceed 1e-2 eV/angstrom. The electron-ion interaction is described by PAW pseudopotentials. The calculations have been collected by sampling chemical compositions across the entire compositional range. The chemical compositions have been sampled by progressively changing the number of atoms per constituent by 4. For each chemical composition of binaries and ternaries, the first-principle calculations have been run for 100 randomized arrangements of the constituents on the BCC lattice sites. We collected data for a total of 3,100 randomized atomic structures over 31 chemical compositions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Satellites, core hole excitations, and spin-resolved electronic structure in the spectroscopy of half-metallic CrO 2

Photoelectron satellites—the structures appearing on the low kinetic or high binding-energy side of the “main” or “elastic” photopeak—betray the complex many-body interactions set in motion by the sudden creation of the core hole. In this work, we demonstrate, using the technologically important ferromagnetic half-metal CrO 2 , how such satellites can manifest themselves in other core-level spectroscopies of the material and how they can reveal important details pertinent to its electronic structure. Specifically, we identify a fluorescence satellite in the Cr 𝐿 3 resonant x-ray-emission spectra that radiates at a constant emission energy across the Cr 𝐿 3 x-ray edge with energy ≈1.3 eV above the ordinary valence fluorescence. Here, we provide evidence that this feature arises from the valence recombination of the Cr 2⁢𝑝 core hole “dressed” by the same shakeup charge-transfer process present in both the Cr x-ray photoelectron and the Cr x-ray absorption spectra with its energy uniquely measuring the exchange splitting of the Cr 3⁢𝑑 level. Further analysis of the x-ray emission data reveals three additional features that radiate at constant loss energy that are attributed to combinations of Cr 3⁢𝑑⁢(𝑡 2⁢𝑔 ) → Cr 3⁢𝑑⁢(𝑡 2⁢𝑔 ), charge-transfer O 2⁢𝑝→Cr 3⁢𝑑, and crystal-field Cr⁢ 3⁢𝑑⁡(𝑡 2⁢𝑔 )→Cr⁢ 3⁢𝑑⁡(𝑒 𝑔 ) excitations. These assignments and their energies are supported by density-functional theory calculations, the accuracy of which we demonstrate by hard x-ray valence-photoemission measurements. Atomic multiplet calculations, which include crystal-field effects, help interpret x-ray photoelectron and x-ray absorption spectra of the covalently mixed Cr ion. Resonant Cr K-𝐿 2,3 ⁢𝐿 2,3 Auger-electron emission spectra support a ligand-to-metal nature of the charge-transfer process while highlighting the charge sensitivity differences between photon-in/electron-out and photon-in/photon-out spectroscopies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

HfTa_BCC_SolidSolution_128atoms_VASP6

We performed density functional theory (DFT) calculations for body-centered-cubic (BCC) structures with 128 lattices sites of solid solution binary alloys hafnium-tantalum (Hf-Ta). The electronic structures of alloys have been calculated using Vienna Ab initio Simulation Package (VASP). Within this package the DFT approach is used to reduce many-body Schrodinger equation to set of single particle Kohn-Sham (KS) equations. The generalized electronic exchange-correlation functional is described by generalized gradient approximation with the Perdew-Burke-Ernzerhof parametrization. The electron-ion interactions is described by pseudopotentials developed within the plane-wave basis projector augmented-wave (PAW) approach. These pseudopotentials are available at the VASP portal (http://cms.mpi.univie.ac.at/vasp/). Our calculations have been run with the pseudopotentials treating s and p semi-core states as valence in case for the elements Hf and Ta. The electronic densities and potentials are expanded over plane-waves with energy cutoff of 350 eV. 2x2x2 k-mesh and normal precision were used. The alloys were modeled by supercell containing 128 randomly distributed atoms. At initial step the atoms occupy perfect BCC lattice sites. This initial structure was optimized until energy changes less than 1e-6 eV, while forces acting on atoms don't exceed 1e-2 eV/angstrom. The electron-ion interaction is described by PAW pseudopotentials. The calculations have been collected by sampling chemical compositions across the entire compositional range. The chemical compositions have been sampled by progressively changing the number of atoms per constituent by 4. For each chemical composition of binaries and ternaries, the first-principle calculations have been run for 100 randomized arrangements of the constituents on the BCC lattice sites. We collected data for a total of 3,040 randomized atomic structures over 31 chemical compositions. Further methodological and structural information is contained in the dataset README.txt file.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Entanglement Structure of Non-Gaussian States and How to Measure It

Rapidly growing capabilities of quantum simulators to probe quantum many-body phenomena require new methods to characterize increasingly complex states. Here, we present a protocol that constrains quantum states using experimentally measured correlation functions. This method enables measurement of a quantum state’s entanglement structure, opening a new route to study entanglement-related phenomena. Our approach extends Gaussian state parameterizations by systematically incorporating higher-order correlations. We show the protocol’s usefulness in conjunction with current and forthcoming experimental capabilities, focusing on weakly interacting fermions as a proof of concept. Here, the lowest nontrivial expansion quantitatively predicts early time thermalization dynamics, including signaling the onset of quantum chaos indicated by the entanglement Hamiltonian.

Fermi gases↗
DOE OSTI2026

NbTi_BCC_SolidSolution_128atoms_VASP6

We performed density functional theory (DFT) calculations for body-centered-cubic (BCC) structures with 128 lattices sites of solid solution binary alloys niobium-titanium (Nb-Ti). The electronic structures of alloys have been calculated using Vienna Ab initio Simulation Package (VASP), https://github.com/ORNL/ScalableWorkflow_VASP_Calculations. Within this package the DFT approach is used to reduce many-body Schrodinger equation to set of single particle Kohn-Sham (KS) equations. The generalized electronic exchange-correlation functional is described by generalized gradient approximation with the Perdew-Burke-Ernzerhof parametrization. The electron-ion interactions is described by pseudopotentials developed within the plane-wave basis projector augmented-wave (PAW) approach. These pseudopotentials are available at the VASP portal (http://cms.mpi.univie.ac.at/vasp/). Our calculations have been run with the pseudopotentials treating s and p semi-core states as valence in case for the elements Nb and Ti. The electronic densities and potentials are expanded over plane-waves with energy cutoff of 350 eV. 2x2x2 k-mesh and normal precision were used. The alloys were modeled by supercell containing 128 randomly distributed atoms. At initial step the atoms occupy perfect bcc lattice cites. This initial structure was optimized until energy changes less than 1e-6 eV, while forces acting on atoms don't exceed 1e-2 eV/angstrom. The electron-ion interaction is described by PAW pseudopotentials. The calculations have been collected by sampling chemical compositions across the entire compositional range. The chemical compositions have been sampled by progressively changing the number of atoms per constituent by 4. For each chemical composition of binaries and ternaries, the first-principle calculations have been run for 100 randomized arrangements of the constituents on the BCC lattice sites. We collected data for a total of 3,100 randomized atomic structures over 31 chemical compositions. The calculations have been collected on Air Force HPC11 cluster using the VASP 6.5.1. Additional methodology and file structure information is available in the dataset README.txt file.

36 MATERIALS SCIENCE↗
DOE OSTI2026

TiV_BCC_SolidSolution_128atoms_VASP6

We performed density functional theory (DFT) calculations for body-centered-cubic (BCC) structures with 128 lattices sites of solid solution binary alloys titanium-vanadium (Ti-V). The electronic structures of alloys have been calculated using Vienna Ab initio Simulation Package (VASP). Within this package the DFT approach is used to reduce many-body Schrodinger equation to set of single particle Kohn-Sham (KS) equations. The generalized electronic exchange-correlation functional is described by generalized gradient approximation with the Perdew-Burke-Ernzerhof parametrization. The electron-ion interactions is described by pseudopotentials developed within the plane-wave basis projector augmented-wave (PAW) approach. These pseudopotentials are available at the VASP portal (http://cms.mpi.univie.ac.at/vasp/). Our calculations have been run with the pseudopotentials treating s and p semi-core states as valence in case for the elements Ti and V. The electronic densities and potentials are expanded over plane-waves with energy cutoff of 350 eV. 2x2x2 k-mesh and normal precision were used. The alloys were modeled by supercell containing 128 randomly distributed atoms. At initial step the atoms occupy perfect bcc lattice cites. This initial structure was optimized until energy changes less than 1e-6 eV, while forces acting on atoms don't exceed 1e-2 eV/angstrom. The electron-ion interaction is described by PAW pseudopotentials. The calculations have been collected by sampling chemical compositions across the entire compositional range. The chemical compositions have been sampled by progressively changing the number of atoms per constituent by 4. For each chemical composition of binaries and ternaries, the first-principle calculations have been run for 100 randomized arrangements of the constituents on the BCC lattice sites. We collected data for a total of 3,100 randomized atomic structures over 31 chemical compositions. The calculations have been collected on Air Force HPC11 cluster using the VASP 6.5.1. Additional methodology and file structure information is available in the dataset README.txt file.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Neutrino flavor instabilities in neutron star mergers with moment transport: Slow, fast, and collisional modes

Determining where, when, and how neutrino flavor oscillations must be included in large-scale simulations of hot and dense astrophysical environments is an enduring challenge that must be tackled to obtain accurate predictions. Here, using an angular moment-based linear stability analysis framework, we examine the different kinds of flavor instabilities that can take place in the context of the postprocessing of a neutron star merger simulation, with a particular focus on the collisional flavor instability and a careful assessment of several commonly used approximations. First, neglecting anisotropies of the neutrino field, we investigate the extent to which commonly used monoenergetic growth rates reproduce the results obtained from a full multienergy treatment. Contrary to the large discrepancies found in core-collapse supernova environments, we propose a simple combination of energy-averaged estimates that reproduces the multienergy growth rates in our representative simulation snapshot. We then quantify the impact of additional physical effects, including nuclear many-body corrections, scattering opacities, and the inclusion of the vacuum term in the neutrino Hamiltonian. Finally, we include the neutrino distribution anisotropies, which allows us to explore, for the first time in a multienergy setting, the interplay between collisional, fast, and slow modes in a moment-based neutron star merger simulation. We find that, despite a dominance of the fast instability in most of the simulation volume, certain regions exhibit only a collisional instability, while others, especially at large distances, exhibit a slow instability that is largely underestimated if anisotropic effects are neglected.

neutrino oscillations↗
DOE OSTI2026

HfTi_BCC_SolidSolution_128atoms_VASP6

We performed density functional theory (DFT) calculations for body-centered-cubic (BCC) structures with 128 lattices sites of solid solution binary alloys hafnium-titanium (Hf-Ti). The electronic structures of alloys have been calculated using Vienna Ab initio Simulation Package (VASP). Within this package the DFT approach is used to reduce many-body Schrodinger equation to set of single particle Kohn-Sham (KS) equations. The generalized electronic exchange-correlation functional is described by generalized gradient approximation with the Perdew-Burke-Ernzerhof parametrization. The electron-ion interactions is described by pseudopotentials developed within the plane-wave basis projector augmented-wave (PAW) approach. These pseudopotentials are available at the VASP portal (http://cms.mpi.univie.ac.at/vasp/). Our calculations have been run with the pseudopotentials treating s and p semi-core states as valence in case for the elements Hf and Ti. The electronic densities and potentials are expanded over plane-waves with energy cutoff of 350 eV. 2x2x2 k-mesh and normal precision were used. The alloys were modeled by supercell containing 128 randomly distributed atoms. At initial step the atoms occupy perfect bcc lattice cites. This initial structure was optimized until energy changes less than 1e-6 eV, while forces acting on atoms don't exceed 1e-2 eV/angstrom. The electron-ion interaction is described by PAW pseudopotentials. The calculations have been collected by sampling chemical compositions across the entire compositional range. The chemical compositions have been sampled by progressively changing the number of atoms per constituent by 4. For each chemical composition of binaries and ternaries, the first-principle calculations have been run for 100 randomized arrangements of the constituents on the BCC lattice sites. We collected data for a total of 3,100 randomized atomic structures over 31 chemical compositions. The calculations have been collected on Air Force HPC11 cluster using the VASP 6.5.1. Additional methodology and file structure information is available in the dataset README.txt file.

36 MATERIALS SCIENCE↗
DOE OSTI2025

TaTi_BCC_SolidSolution_128atoms_VASP6

We performed density functional theory (DFT) calculations for body-centered-cubic (BCC) structures with 128 lattices sites of solid solution binary alloys tantalum-titanium (Ta-Ti). The electronic structures of alloys have been calculated using Vienna Ab initio Simulation Package (VASP). Within this package the DFT approach is used to reduce many-body Schrodinger equation to set of single particle Kohn-Sham (KS) equations. The generalized electronic exchange-correlation functional is described by generalized gradient approximation with the Perdew-Burke-Ernzerhof parametrization. The electron-ion interactions is described by pseudopotentials developed within the plane-wave basis projector augmented-wave (PAW) approach. These pseudopotentials are available at the VASP portal (http://cms.mpi.univie.ac.at/vasp/). Our calculations have been run with the pseudopotentials treating s and p semi-core states as valence in case for the elements Hf and Nb. The electronic densities and potentials are expanded over plane-waves with energy cutoff of 350 eV. 2x2x2 k-mesh and normal precision were used. The alloys were modeled by supercell containing 128 randomly distributed atoms. At initial step the atoms occupy perfect bcc lattice cites. This initial structure was optimized until energy changes less than 1e-6 eV, while forces acting on atoms don't exceed 1e-2 eV/angstrom. The electron-ion interaction is described by PAW pseudopotentials. The calculations have been collected by sampling chemical compositions across the entire compositional range. The chemical compositions have been sampled by progressively changing the number of atoms per constituent by 4. For each chemical composition of binaries and ternaries, the first-principle calculations have been run for 100 randomized arrangements of the constituents on the BCC lattice sites. We collected data for a total of 3,100 randomized atomic structures over 31 chemical compositions. The calculations have been collected on Air Force HPC11 cluster using the VASP 6.5.1. Additional methodology and file structure information is available in the dataset README.txt file.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Atomic Alignment in PbS Nanocrystal Superlattices with Compact Inorganic Ligands via Reversible Oriented Attachment of Nanocrystals

Nanocrystals (NCs) serve as versatile building blocks for the creation of functional materials with NC self-assembly offering opportunities to enable novel material properties. Here, in this work, we demonstrate that PbS NCs functionalized with strongly negatively charged metal chalcogenide complex (MCC) ligands, such as Sn 2 S 6 4– and AsS 4 3– , can self-assemble into all-inorganic superlattices with both long-range superlattice translational and atomic-lattice orientational order. Structural characterizations reveal that the NCs adopt an unexpected edge-to-edge alignment, and numerical simulation clarifies that orientational order is thermodynamically stabilized by many-body ion correlations originating from the dense electrolyte. Furthermore, we show that the superlattices of Sn 2 S 6 4– -functionalized PbS NCs can be fully disassembled back into the colloidal state, which is highly unusual for orientationally attached superlattices with atomic-lattice alignment. The reversible oriented attachment of NCs, enabling their dynamic assembly and disassembly into effectively single-crystalline superstructures, offers a pathway toward designing reconfigurable materials with adaptive and controllable electronic and optoelectronic properties.

Landau-Ginzburg theory↗
DOE OSTI2025

Taming the virtual space for incremental full configuration interaction

Incremental full configuration interaction (iFCI) closely approximates the FCI limit with polynomial cost through a many-body expansion of the correlation energy, providing highly accurate total energies within a given basis set. To extend iFCI beyond previous basis set limitations, this work introduces a novel natural orbital (NO) screening approach, incremental NO full configuration interaction (iNO-FCI). By consideration of the importance of virtual orbital selection in the convergence of iFCI, iNO-FCI maximizes the consistency between orbitals selected for each correlated body. iNO-FCI employs a principle of cancellation of errors and ensures that the same set of virtual NOs is used for interdependent terms. Here, this strategy significantly reduces computational cost without compromising precision. Computational savings of up to 95% are demonstrated, allowing access to larger basis sets that were previously computationally prohibitive. iNO-FCI is herein introduced and benchmarked for several difficult test cases involving double-bond dissociation, biradical systems, conjugated π systems, and the spin gap of a Cu-based transition metal complex.

Correlation energy↗
DOE OSTI2025

Exactness of the normal-ordered two-body truncation of three-nucleon forces

Reference-state-based many-body methods start from Hamiltonians that are normal ordered with respect to the reference state. In low-energy nuclear physics applications, normal-ordered Hamiltonians consisting of two- and three-nucleon forces are usually truncated at the two-body rank with residual three-nucleon operators being discarded. Benchmark computations have shown that this truncation is accurate, but we lack an understanding about why it works. Here, we show that the normal-ordered two-body truncation is exact for zero-range three-body forces when nuclei are computed using the coupled cluster with singles and doubles method. As the nuclear three-nucleon force is short ranged and a three-body contact is a leading term in effective field theories of quantum chromodynamics, our result provides an analytical basis for the popular normal-ordered two-body approximation.

Rothman, Maxwell [Univ. of Tennessee, Knoxville, T↗