Search NASA⌕ Search

SEARCH · Search NASA

Results for “Memory device”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Titan probe technology assessment and technology development plan study

The need for technology advances to accomplish the Titan probe mission was determined by defining mission conditions and requirements and evaluating the technology impact on the baseline probe configuration. Mission characteristics found to be technology drivers include (1) ten years dormant life in space vacuum; (2) unknown surface conditions, various sample materials, and a surface temperature; and (3) mission constraints of the Saturn Orbiter Dual Probe mission regarding weight allocation. The following areas were identified for further development: surface sample acquisition system; battery powered system; nonmetallic materials; magnetic bubble memory devices, and the landing system. Preentry science, reliability, and weight reduction and redundancy must also be considered.

Castro, A. J.↗
NASA NTRS1980

Proton upsets in LSI memories in space

Two types of large scale integrated dynamic random access memory devices were tested and found to be subject to soft errors when exposed to protons incident at energies between 18 and 130 MeV. These errors are shown to differ significantly from those induced in the same devices by alphas from an Am-241 source. There is considerable variation among devices in their sensitivity to proton-induced soft errors, even among devices of the same type. For protons incident at 130 MeV, the soft error cross sections measured in these experiments varied from 10 to the -8th to 10 to the -6th sq cm/proton. For individual devices, however, the soft error cross section consistently increased with beam energy from 18-130 MeV. Analysis indicates that the soft errors induced by energetic protons result from spallation interactions between the incident protons and the nuclei of the atoms comprising the device. Because energetic protons are the most numerous of both the galactic and solar cosmic rays and form the inner radiation belt, proton-induced soft errors have potentially serious implications for many electronic systems flown in space.

Mcnulty, P. J.↗
NASA NTRS1981

CMOS RAM cosmic-ray-induced-error-rate analysis

A significant number of spacecraft operational anomalies are believed to be associated with cosmic-ray-induced soft errors in the LSI memories. Test programs using a cyclotron to simulate cosmic rays have established conclusively that many common commercial memory types are vulnerable to heavy-ion upset. A description is given of the methodology and the results of a detailed analysis for predicting the bit-error rate in an assumed space environment for CMOS memory devices. Results are presented for three types of commercially available CMOS 1,024-bit RAMs. It was found that the HM6508 is susceptible to single-ion induced latchup from argon and krypton ions. The HS6508 and HS6508RH and the CDP1821 apparently are not susceptible to single-ion induced latchup.

Pickel, J. C.↗
NASA NTRS1982

Color visualization for fluid flow prediction

High-resolution raster scan color graphics allow variables to be presented as a continuum, in a color-coded picture that is referenced to a geometry such as a flow field grid or a boundary surface. Software is used to map a scalar variable such as pressure or temperature, defined on a two-dimensional slice of a flow field. The geometric shape is preserved in the resulting picture, and the relative magnitude of the variable is color-coded onto the geometric shape. The primary numerical process for color coding is an efficient search along a raster scan line to locate the quadrilteral block in the grid that bounds each pixel on the line. Tension spline interpolation is performed relative to the grid for specific values of the scalar variable, which is then color coded. When all pixels for the field of view are color-defined, a picture is played back from a memory device onto a television screen.

Smith, R. E.↗
NASA NTRS1982

Investigation of multilayer magnetic domain lattice file

A theoretical and experimental investigation determined that current accessed self structured bubble memory devices have the potential of meeting projected data density and speed requirements. Device concepts analyzed include multilayer ferrimagnetic devices where the top layer contains a domain structure which defines the data location and the second contains the data. Current aperture and permalloy assisted current propagation devices were evaluated. Based on the result of this work more detailed device research was initiated. Detailed theoretical and experimental studies indicate that the difference in strip and threshold between a single bubble in the control layer and a double bubble which would exist in both the control layer and data layer is adequate to allow for detection of data. Detailed detector designs were investigated.

Torok, E. J.↗
NASA NTRS1983

Study of the photovoltaic effect in thin film barium titanate

The feasibility of making non-volatile digital memory devices of barium titanate, BaTiO3, that are integrated onto a silicon substrate with the required ferroelectric film produced by processing, compatible with silicon technology was examined.

Grannemann, W. W.↗
NASA NTRS1985

RAY-O-VAC BR2325 Lithium Carbon Monofluoride Cell Performance

RAY-O-VAC currently markets a 160 mAH lithium cell recommended for usage in watch and calculator products. The lithium carbon monofluoride cell offers an extended shelf life with no reduction in performance effectiveness. The BR2325 cell has aerospace applications for memory devices and telemetry systems. Over one hundred thirty (130) cells were purchased and tested for evaluation purposes. The test statistics and overall cell performance of the RAY-O-VOC BR2325 lithium carbon monofluoride cell is reviewed.

Mcdermott, J. K.↗
NASA NTRS1985

Method of and apparatus for generating an interstitial point in a data stream having an even number of data points

Apparatus for doubling the data density rate of an analog to digital converter or doubling the data density storage capacity of a memory deviced is discussed. An interstitial data point midway between adjacent data points in a data stream having an even number of equal interval data points is generated by applying a set of predetermined one-dimensional convolute integer coefficients which can include a set of multiplier coefficients and a normalizer coefficient. Interpolator means apply the coefficients to the data points by weighting equally on each side of the center of the even number of equal interval data points to obtain an interstital point value at the center of the data points. A one-dimensional output data set, which is twice as dense as a one-dimensional equal interval input data set, can be generated where the output data set includes interstitial points interdigitated between adjacent data points in the input data set. The method for generating the set of interstital points is a weighted, nearest-neighbor, non-recursive, moving, smoothing averaging technique, equivalent to applying a polynomial regression calculation to the data set.

Edwards, T. R.↗
NASA NTRS1986

Numerical simulation of the flow field around a complete aircraft

The present effort represents a first attempt of numerical simulation of the flow field around a complete aircraft-like, lifting configuration utilizing the Reynolds averaged Navier-Stokes equations. The numerical solution generated for the experimental aircraft concept X24C-10D at a Mach number of 5.95 not only exhibited accurate prediction of detailed flow properties but also of the integrated aerodynamic coefficients. In addition, the present analysis demonstrated that a page structure of data collected into cyclic blocks is an efficient and viable means for processing the Navier-Stokes equations on the CRAY XMP-22 computer with external memory device.

Shang, J. S.↗
NASA NTRS1987

Numerical simulation of three dimensional transonic flows

The three-dimensional flow over a projectile has been computed using an implicit, approximately factored, partially flux-split algorithm. A simple composite grid scheme has been developed in which a single grid is partitioned into a series of smaller grids for applications which require an external large memory device such as the SSD of the CRAY X-MP/48, or multitasking. The accuracy and stability of the composite grid scheme has been tested by numerically simulating the flow over an ellipsoid at angle of attack and comparing the solution with a single grid solution. The flowfield over a projectile at M = 0.96 and 4 deg angle-of-attack has been computed using a fine grid, and compared with experiment.

Sahu, Jubaraj↗
NASA NTRS1989

Field-Sequential Color Converter

Electronic conversion circuit enables display of signals from field-sequential color-television camera on color video camera. Designed for incorporation into color-television monitor on Space Shuttle, circuit weighs less, takes up less space, and consumes less power than previous conversion equipment. Incorporates state-of-art memory devices, also used in terrestrial stationary or portable closed-circuit television systems.

Studer, Victor J.↗
NASA NTRS1990

Porous-Floating-Gate Field-Effect Transistor

Porous-floating-gate, "vertical" field-effect transistor proposed as programmable analog memory device especially suitable for use in electronic neural networks. Analog value of electrical conductance of device represents synaptic weight (strength of synaptic connection) repeatedly modified by application of suitable writing or erasing voltage. Suited for hardware implementations of massively parallel neural-network architectures for two important reasons: vertical transistor structure requires only two external electrodes, and use of tailored amorphous semiconductors provides choice of very wide range of low conductivity values, dictated by overall power dissipation requirements in massively parallel neural-network circuits.

Thakoor, Anilkumar P.↗
NASA NTRS1990

Numerical simulation of three-dimensional transonic flows

The three-dimensional flow over a projectile has been computed using an implicit, approximately factored, partially flux-split algorithm. A simple composite grid scheme has been developed in which a single grid is partitioned into a series of smaller grids for applications which require an external large memory device such as the SSD of the CRAY X-MP/48 or multi-tasking. The accuracy and stability of the composite grid scheme have been tested by numerically simulating the flow over an ellipsoid at an angle of attack and comparing the solution with a single-grid solution. The flow field over a projectile at M = 0.96 and 1.1, and 4-deg angle of attack has been computed using a fine grid and compared with experiment.

Sahu, Jubaraj↗
NASA NTRS1992

Compact Translating-Head Magnetic Memories

Stationary magnetic media stores information at densities up to 6.5 Gb/cm(Sup 2). High-density memory devices combine features of advanced rotating-disk magnetic recording and playback systems with compact two-axis high-acceleration linear actuators. New devices weigh less, occupy less space, and consume less power than disk and tape recorders.

Katti, Romney R.↗
NASA NTRS1992

Shape-Memory Probe Grasps Small Objects

Shape-memory device removes foreign objects from ear canal, nose, or throat with little risk of damage to tissue. Thin, flexible wire inserted into cavity. Once positioned, it is made to bend into hook, tweezer, or other "remembered" grasping configuration by heating above critical temperature.

Angulo, Earl D.↗
NASA NTRS1992

System for memorizing maximum values

The invention discloses a system capable of memorizing maximum sensed values. The system includes conditioning circuitry which receives the analog output signal from a sensor transducer. The conditioning circuitry rectifies and filters the analog signal and provides an input signal to a digital driver, which may be either linear or logarithmic. The driver converts the analog signal to discrete digital values, which in turn triggers an output signal on one of a plurality of driver output lines n. The particular output lines selected is dependent on the converted digital value. A microfuse memory device connects across the driver output lines, with n segments. Each segment is associated with one driver output line, and includes a microfuse that is blown when a signal appears on the associated driver output line.

Bozeman, Richard J., Jr.↗
NASA NTRS1994

Imaging Domains In Magnetic Garnets By Use Of TSMFM

Tunneling-stabilized magnetic-force microscopy (TSMFM) demonstrated to yield images of magnetic domains in low-coercivity magnetic garnets with perpendicular anisotropy. Ability to generate images of domain walls and minute vertical Bloch lines aids study of vertical-Bloch-line magnetic memory devices that contain garnets. TSMFM provides desired resolution because its resolution not limited by diffraction.

Katti, Romney R.↗
NASA NTRS1995

Semiconductor/High-Tc-Superconductor Hybrid ICs

Hybrid integrated circuits (ICs) containing both Si-based semiconducting and YBa(2)Cu(3)O(7-x) superconducting circuit elements on sapphire substrates developed. Help to prevent diffusion of Cu from superconductors into semiconductors. These hybrid ICs combine superconducting and semiconducting features unavailable in superconducting or semiconducting circuitry alone. For example, complementary metal oxide/semiconductor (CMOS) readout and memory devices integrated with fast-switching Josephson-junction super-conducting logic devices and zero-resistance interconnections.

Burns, Michael J.↗