Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mixed Oxides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Analysis of iron-chromium-aluminum samples exposed to accident conditions followed by quench in the QUENCH-19 experiment

The QUENCH-19 experiment was a first-of-its-kind full-bundle test simulating accident conditions followed by water quench on accident-tolerant fuel (ATF) cladding. Here, a type of FeCrAl(Y) alloy, B136Y3, was developed at Oak Ridge National Laboratory and tested at the Karlsruhe Institute of Technology using Kanthal APM corner rods, a shroud, and Kanthal AF spacer grids. Testing conditions were similar to those in QUENCH-15—which tested ZIRLO cladding behavior—so that B136Y3 and ZIRLO cladding could be compared. QUENCH-19 consisted of an initial pre-oxidation heating followed by a transient. Then, a maximum power hold, which was not present in QUENCH-15, was executed to extend the heating period for the FeCrAl(Y) rods. Finally, a rapid water quench was executed that was similar to emergency core coolant system (ECCS) actuation. Compared with the ZIRLO rods in QUENCH-15, the bundle in QUENCH-19 released significantly less H 2 (9.2 g vs. 47.6 g) and achieved a much lower maximum temperature (1455°C vs. 1880°C). Furthermore, no breakaway oxidation was observed in QUENCH-19. Metallographic mounts revealed that despite the symmetry of the setup, at elevations near the maximum temperature, cladding and thermocouples were heavily damaged, substantial melting and oxidation occurred, and the cladding underwent chemical interaction with the thermocouple sheaths. Additionally, the ZrO 2 spacers detrimentally interacted with the cladding, leading to mixed oxide debris and the full destruction of some rods. Additional failure was found in certain cooler rods that may have risen due to the high thermal expansion coefficient of FeCrAl alloys. This paper presents an analysis of this work, which suggests that FeCrAl cladding can chemically survive anticipated loss-of-coolant accident events followed by rapid ECCS quench if the correct geometry and core design are present.

36 MATERIALS SCIENCE↗
DOE OSTI2025

SCILLA nitrogen oxide (NOx) airborne data

Nitrogen oxides mixing ratios in ppb are measured using a Teledyne API Model T200UP. The analyzer uses chemiluminescence to determine NO concentration. Alternating measurement of the concentrations of total NOx (NO + NO2) and just NO are made by directing the sample through a blue light converter that photolyzes NO2 to NO and bypassing it, respectively, with the NO2 concentration calculated as the difference between the two. Sampled air was pulled from above the Naval Postgraduate School’s (NPS) Twin Otter aircraft through a rear-facing, ¼” OD PFA Teflon tube. The sample stream was split between several other gas analyzers (CO, O3, and H2O) and an oxidation flow reactor. The NO, NO2, and NOx mixing ratios were recorded once per minute.

NOx concentration↗
DOE OSTI2025

Investigation of High-Temperature Compatibility of Select Oxides with Yttrium Hydride for Micro and Space Reactor Applications

Yttrium hydride is a promising material for a high-temperature neutron moderator in advanced micro and space reactors due to its high hydrogen density and relative thermal stability compared to other metal hydrides. However, yttrium hydride desorbs hydrogen rapidly at temperatures above 800°C, which is below the operational temperature range of some reactor designs. A hydrogen barrier coating of oxide on the hydride surface may inhibit hydrogen loss at 800°C and beyond, but the high-temperature compatibility between yttrium hydride and many oxides is currently unknown. The high-temperature compatibility of Al 2 O 3 , MgO, and Y 2 O 3 with YH 1.92 was examined by subjecting mixed oxide–hydride pellets to a 1200°C heat treatment then using a combination of diffractometry, microscopy, and spectroscopy to determine changes in the pellet composition as a result. Yttrium scavenged oxygen from both Al 2 O 3 and MgO to form Y 2 O 3 , resulting in significant loss of YH 1.92 . Yttrium reacted with reduced aluminum to form YAl 2 and several other compounds. Reduced magnesium volatilized above 1091°C and vacated the pellet. Only Y 2 O 3 did not appreciably react with YH 1.92 . Of the three oxides tested, only Y 2 O 3 was compatible with YH 1.92 at 1200°C based on the experimental criteria.

compatibility↗
DOE OSTI2020

Cathode active materials having improved particle morphologies

Mixed-metal oxides and lithiated mixed-metal oxides are disclosed that involve compounds according to, respectively, NixMnyCozMeαOβ and Li1+γNixMnyCozMeαOβ. In these compounds, Me is selected from B, Na, Mg, Al, Si, K, Ca, Sc, Ti, V, Cr, Fe, Cu, Zn, Ga, Ge, Zr, Nb, Mo, Ru, Ag, In, and combinations thereof; 0≤x≤1; 0≤y≤1; 0≤z<1; x+y+z>0; 0≤α≤0.5; and x+y+α>0. For the mixed-metal oxides, 1≤β≤5. For the lithiated mixed-metal oxides, −0.1≤γ≤1.0 and 1.9≤β≤3. The mixed-metal oxides and the lithiated mixed-metal oxides include particles having an average density greater than or equal to 90% of an ideal crystalline density.

25 ENERGY STORAGE↗
DOE OSTI2021

Cathode active materials having improved particle morphologies

Mixed-metal oxides and lithiated mixed-metal oxides are disclosed that involve compounds according to, respectively, NixMnyCozMeαOβ and Li1+γNixMnyCozMeαOβ. In these compounds, Me is selected from B, Na, Mg, Al, Si, K, Ca, Sc, Ti, V, Cr, Fe, Cu, Zn, Ga, Ge, Zr, Nb, Mo, Ru, Ag, In, and combinations thereof; 0≤x≤1; 0≤y≤1; 0≤z<1; x+y+z>0; 0≤α≤0.5; and x+y+α>0. For the mixed-metal oxides, 1≤β≤5. For the lithiated mixed-metal oxides, −0.1≤γ≤1.0 and 1.9≤β≤3. The mixed-metal oxides and the lithiated mixed-metal oxides include particles having an average density greater than or equal to 90% of an ideal crystalline density.

Dai, Hongli↗
DOE OSTI2021

Net Electronic Charge as an Effective Electronic Descriptor for Oxygen Release and Transport Properties of SrFeO 3 -based Oxygen Sorbents

Perovskite oxides, as oxygen sorbents, exhibit excellent potential in thermochemical redox applications such as chemical looping air separation (CLAS), resulting from their excellent redox properties and high tunability. The structural and compositional flexibility of perovskites, while making these mixed oxides highly versatile, also poses challenges for their design and optimization. Moreover, the elevated operating temperature and dynamic oxygen partial pressure swings during redox processes add additional complications for oxygen sorbent design. From a fundamental standpoint, finding simple yet effective descriptors for the effect of cation substitutions on oxygen sorbents’ redox and oxygen transport properties are of significant importance for rational optimization of perovskite-based oxygen sorbents. In the present study, a series of A/B-site-doped SrFeO 3-δ perovskites are investigated using density functional theory (DFT) + U simulations. From these simulations, an effective electronic structural descriptor, the net electronic charge (Δe) of oxygen anions, is extracted based on its excellent correlations with vacancy formation energy, experimentally derived oxygen capacity, and oxygen vacancy migration barrier. Overall, these findings provide an effective tool to correlate the oxygen sorbents’ redox performances with a simple yet physically meaningful descriptor for rational design and optimization of perovskites in the context of CLAS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Validation of Numerical Tools for Calculating Reactivity Feedback in Sodium Fast Reactors Using SEFOR Experimental Data

The Southwest Experimental Fast Oxide Reactor (SEFOR) was an experimental sodium-cooled fast breeder reactor operated from 1969 to 1972 with experiments designed to measure Doppler reactivity feedback in a wide temperature range from around 350 °F to temperatures approaching the melting point of mixed oxide fuel of around 5000 °F, providing valuable data for code validations. Co-supported by the Department of Energy (DOE) Fast Reactor Program (FRP) and the DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, the SEFOR benchmark project focused on using the experimental data to validate numerical tools that are used in industry and academia to design and license sodium-cooled fast reactors (SFRs). By the end of FY-25, substantial progress was achieved in the SEFOR benchmark study. A variety of numerical tools commonly used for modeling SFRs were applied to develop models for SEFOR core configurations I-D, I-E, I-I, and I-J. These included Monte Carlo codes such as MCNP, Serpent, and Shift; deterministic codes such as the legacy Argonne Reactor Computation (ARC) suite and the high-fidelity NEAMS code Griffin; and the system analysis code SAS4A/SASSYS-1 (SAS). Using these models, both SEFOR zero-power experiments and power-ascending tests were successfully simulated. Comparisons were performed against experimental measurements of core criticalities, reflector worth, kinetics parameters (Λ/βeff), isothermal reactivity feedback (from 350 °F to 760 °F at zero power), and power-ascending reactivity feedback (as power increased from 0.4 MW to 17 MW). In general, these comparisons demonstrated very good agreement between numerical results and experimental data. In Fiscal Year 26 (FY-26), the SEFOR benchmark project will continue to address the modeling issues identified in FY-25. Effort will focus on the simulation of reactivity insertion transients in SEFOR core II using the ARC/SAS model. Future work will also focus on incorporating BISON into the SEFOR core modeling process to enable the first Multiphysics simulations of the isothermal tests based on the MOOSE framework.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

Exploring the Structure–Function Relationship in Iridium–Cobalt Oxide Catalyst for Oxygen Evolution Reaction across Different Electrolyte Media

Renewable hydrogen generation from water electrolysis offers a viable path to decarbonization if the costs can be reduced. The iridium-based anode catalyst is one of the most expensive components in electrolyzers. We propose reducing iridium usage by substituting Ir with Co, a more affordable metal, in the mixed oxide phase to enhance the catalytic activity while minimizing Ir consumption. A modified surfactant-assisted Adams fusion synthesis technique was developed as a scalable method for producing IrCo oxide nanoparticles. The synthesized material outperforms the commercial baseline, iridium oxide with carbon (IrOx_C), in both acidic and alkaline media. Acid etching (IrCo_ae) further enhances activity by selectively removing Co to expose more active sites. IrCo_ae achieved a significantly lower overpotential at 10 mA/cm 2 compared to IrOx_C, with reductions of approximately 18% under acidic conditions and 14% under alkaline conditions. This work demonstrates that the proposed synthesis method enables efficient Ir utilization and can be adapted to enhance catalyst stability for renewable hydrogen production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Long-term Moisture Adsorption in Packaged Plutonium Oxide

In 2018, the Department of Energy National Nuclear Security Administration (DOE-NNSA) began implementing dilute and dispose to remove 34 metric tons (MT) of surplus weapons grade plutonium from the US stockpile. Under this plan, surplus plutonium material is converted into plutonium oxide (PuO 2 ) before being stored in metal containers and sent to the DOE Waste Isolation Pilot Plant (WIPP). The dilute and dispose project was implemented as a more cost-effective method for abiding by the Plutonium Management and Disposition Agreement (PMDA) between the USA and Russia, as compared to producing mixed oxide fuel (MOX). The PMDA was originally signed in 2000 and amended in 2010.2 The disassembly of pits and conversion to PuO 2 as part of dilute and dispose is carried out through the Advanced Recovery and Integrated Extraction System (ARIES) developed at Los Alamos National Laboratory (LANL). The dilute portion of dilute and dispose is carried out at Savannah River Site (SRS). With this program in place, it is necessary to ensure the safe, long-term storage of the PuO 2 generated during this process until final disposal at WIPP is accomplished.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Low-Temperature Plasma Treatment for Enhanced Recovery of Highly Valued Critical REEs from Coal (Final Technical Report)

The principle objective of this project was to develop a novel process flowsheet using low-temperature plasma treatment (LTP) integrated with conventional hydrometallurgical processes to recover rare earth elements (REEs), especially highly valued REEs (i.e. scandium and critical REEs), from coal and coal byproducts. LTP treatment was used to pretreat the solid feed material prior to leaching in an effort to improve the leaching characteristics of the REEs and potentially reduce acid consumption. Initially, a detailed experimental program was performed on a laboratory LTP furnace to identify a set of process parameter values to be used for assessing the enhanced leaching performance achieved on four specific gravity fractions of West Kentucky No. 13 and Fire Clay coarse coal refuse materials. High-temperature oxidation (HTO)) was also evaluated as a means for improving REE leachability on the same fractions of both coal sources. The lixiviants used to assess leachability improvements included i) untreated water, ii) 0.1 M ammonium sulfate solution and iii) 1.2 M sulfuric acid solution at a temperature of 75°C. The laboratory data was used to develop multiple process flow sheets using HTO only to produce a rare earth oxide mix concentrate or utilizing both LTP and HTO treatment processes to generate a high purity heavy REO mix concentrate and a light REO mix concentrate. A techno-economic analysis was performed on each circuit.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Chemo-Mechanically Driven In Situ Hierarchical Structure Formation in Mixed Conductors (Final Technical Report)

This document is the Final Technical Report for the Early Career project DE-SC0018963. Essential materials for energy technologies tend to exhibit “hierarchical” functions – they perform multiple, inter-related tasks at different locations, across disparate length and time scales. To best support this heterogeneous function, there is a fundamental need to understand and direct formation of corresponding tailored hierarchical architectures. In particular, a wide variety of applications, from energy conversion and storage to sensing and gas separation, rely on oxide mixed ionic and electronic conductors (MIECs). These critical ceramic materials catalyze reactions at their surfaces and selectively transport both ionic and electronic species in the bulk. Ideally, MIECs should adopt hierarchical structures with 1) high surface areas, 2) surface compositions exhibiting high catalytic activity, and 3) microstructural connectivity in the direction needed for fast mass and charge transport. In practice, however, MIECs.

08 HYDROGEN↗
DOE OSTI2024

Reduction of Iron (III) Oxide in Microwaves Toward Gasification Studies

The purpose of this study is to reduce hematite (Fe2O3) using hydrogen (H2), carbon monoxide (CO), and methane (CH4) gases using microwave irradiation. Conventional temperature programmed reduction of iron phase transformation under H2, CO, and CH4 agree with the literature. Furthermore, the activation energy for the iron phase transformation in a conventional reactor was in the order of H2>CO>CH4, suggesting that CH4 was the best reductant to initiate the reduction at a much lower temperature than CO, and CO was significantly better than H2 atmosphere. Due to the uneven temperature distribution, the apparent activation energy of microwave reduction under H2 was approximately 1/4th when compared to the conventional reduction in H2. X-ray diffraction (XRD) analysis showed a mixed oxide phase in microwave reduction as opposed to the clear phase transformation in conventional studies. To combat the temperature measurement issues in microwave studies, fiber optic sensors and Forward Looking InfraRed (FLIR) sensors were used to acquire the actual temperature distribution in the catalyst bed. Therefore, a reasonably accurate activation energy estimation was achieved in the catalyst bed. Combining these with the characterization and quantification of the different iron phases in microwave reduction will provide a blueprint for future microwave-assisted gasification studies.

Aireddy, Divakar Reddy↗
DOE OSTI2023

The impact of feedstock size and composition on the hydrothermal growth of (U,Th)O 2

Bulk crystal growth of refractory oxides requires unique approaches, and the U x Th 1-x O 2 solid solution is no exception. Hydrothermal transport reactions of U 0.1 Th 0.9 O 2 onto ThO 2 seeds with feedstocks comprised of U 0.1 Th 0.9 O 2 or mixtures of UO 2 and ThO 2 with a nominal composition of U 0.1 Th 0.9 O 2 are investigated with µ-Raman spectroscopy and X-ray fluorescence. In each case, the trends in stoichiometry as a function of distance from the seed are analyzed and the deviations from the nominal stoichiometry discussed. When the feedstock is composed of mixed oxides, the particle surface area’s influence on the feedstock dissolution rate is the dominant factor and can produce U-rich stoichiometries as high as U 0.75 Th 0.25 O 2 . When composed solely of U 0.1 Th 0.9 O 2 , the total growth amount depends on the particle size, but the obtained stoichiometry is the product of differing solubilities. Although the U0.1Th0.9O 2 feedstock produces the most homogeneous growth, the ending growth of the smallest particle UO 2 /ThO 2 mixture yields the stoichiometry closest to U 0.1 Th 0.9 O 2 . How to obtain desired stoichiometries from mixtures by matching the particle size and solubilities is briefly discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Unveiling enhanced oxidation resistance and mechanical integrity of multicomponent ultra–high temperature carbides

The development of a new class of multicomponent ultra-high temperature ceramics (MC-UHTCs), often referred to as high-entropy UHTCs, has gained increased interest due to the possibility of improved thermomechanical and oxidation properties. In this study, a systematic approach by gradual addition in the UHTC components ranging from a binary to a dense quaternary (Ta,Nb,Hf,Ti)C is synthesized using spark plasma sintering (SPS). The solid solutioning was the critical factor in homogenizing the composition in the multicomponent system. The segregation of NbC and HfC was seen in binary and ternary UHTC systems, while a single-phase homogeneity was observed in the quaternary UHTC improving its hardness up to 34.8 GPa. The presence of closely spaced slip lines in the MC-UHTCs enhances resistance to indentation damage up to 72% at an applied load of 200 N. The formation of complex mixed oxide phase of Hf6Ta2O17 ensued in the lower to negligible oxidation even up to 3 min of plasma exposure with temperature exceeding 2800°C. In sum, though the entropy remains medium (0.96R) for the selected system, the quaternary UHTC system undoubtedly has significantly better thermomechanical performance when compared to established baseline UHTCs. Furthermore, this raises the debate on the justification for calling a multicomponent system a “high entropy” to be seen in a new light. The developed MC-UHTCs elicits the paradigm of this new class of UHTCs expanding their potential in thermal protection systems for hypersonic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Modulating coordinate site occupancy in high-entropy spinel electrocatalysts

High entropy spinel oxides provide a versatile platform for electrocatalysis because multiple metal cations can be incorporated into a single crystalline lattice, enabling tunable electronic structures. However, controlling how these cations distribute between tetrahedral and octahedral coordination sites remains a major challenge, limiting rational catalyst design. Here, we modulate cation coordination site occupancy between tetrahedral and octahedral sites in a Co–Fe–Cr–Mn–Ni framework by introducing a sixth cation (Zn, Ga, Mg, or Al) with distinct site preference energies. Using density functional theory, synchrotron X-ray absorption spectroscopy, and magnetic circular dichroism, we demonstrate that Zn preferentially occupies tetrahedral sites, driving increased octahedral occupancy of cobalt. This redistribution increases the population of octahedrally coordinated cobalt in mixed oxidation states, enhances electrical conductivity, and improves oxygen evolution reaction activity. Our findings establish coordination site occupancy as a critical design parameter, providing a strategic pathway for tailoring multicomponent spinel electrocatalysts with optimized performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ru-promoted perovskites as effective redox catalysts for CO2 splitting and methane partial oxidation in a cyclic redox scheme

The current study reports AxA’1-xByB’1-yO3- perovskite redox catalysts (RCs) for CO2-splitting and methane partial oxidation (POx) in a cyclic redox scheme. Strontium (Sr) and iron (Fe) were chosen as A and B site elements with A’ being lanthanum (La), samarium (Sm) or yttrium (Y), and B’ being manganese (Mn), or titanium (Ti) to tailor their equilibrium oxygen partial pressures (P_(O_2 ) s) for CO2-splitting and methane partial oxidation. DFT calculations were performed for predictive optimization of the oxide materials whereas experimental investigation confirmed the DFT predicted redox performance. The redox kinetics of the RCs improved significantly by 1 wt.% ruthenium (Ru) impregnation without affecting their redox thermodynamics. Ru impregnated LaFe0.375Mn0.625O3 (A=0, A’=La, B=Mn, and B’=0) was the most promising RC in terms of its superior redox performance (CH4/CO2 conversion >90% and CO selectivity~ 95%) at 800oC. Long-term redox testing over Ru impregnated LaFe0.375Mn0.625O3 indicated stable performance during the first 30 cycles following with a ~25% decrease in the activity during the last 70 cycles. Air treatment was effective to reactivate the redox catalyst. Detailed characterizations revealed the underlying mechanism for redox catalyst deactivation and reactivation. Furthermore, this study not only validated a DFT guided mixed oxide design strategy for CO2 utilization but also provides potentially effective approaches to enhance redox kinetics as well as long-term redox catalyst performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Radiation-Induced Modifications in Copper Oxide Growth

Radiation-induced effects and their influence on oxidation processes were evaluated for their use as a forensic tool for special nuclear material (SNM). A beam of 10 MeV Au³⁺ ions was used to mimic the accumulation of microstructural damage from self-irradiation through the decay of radionuclides. Several copper samples were irradiated as suitable surrogate materials at 200 °C with a flux of 1x10¹² ions/cm·s to damage levels of 5, 10, and 15 displacements per atom (dpa). This corresponds to about 50, 100, and 150 years, respectively, of accumulated α-decay damage in a PuGa alloy assuming a damage rate of 0.1 dpa/year. After irradiation, all samples were exposed to an accelerated aging process induced by thermal treatment at 350 °C for 1 hour in air. This resulted in the growth of a mixed oxide layer (Cu₂O and CuO) which was characterized in detail using several complementary analytical techniques: Scanning Electron Microscopy, Raman spectroscopy, Synchrotron X-ray diffraction (transmission mode), and Grazing Incidence X-ray diffraction. The oxide layer growth of irradiated Cu at 350°C is distinctly modified as a result of the ion irradiation. Most notably, the growth of the CuO phase is suppressed with increasing radiation damage on the Cu substrate, and structural changes occurred in the Cu₂O phase. These results indicate that damage from self-irradiation over time can cause quantifiable modifications in the oxidation process of metals that could be harnessed for their use as a novel forensic tool.

36 MATERIALS SCIENCE↗