Search NASA⌕ Search

SEARCH · Search NASA

Results for “MnO 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Large Scale Synthesis of Manganese Oxide/Reduced Graphene Oxide Composites as Anode Materials for Long Cycle Lithium Ion Batteries

Manganese oxides have been frequently used as cathodes in primary batteries. Applications of manganese oxides in secondary batteries are limited by low electrical conductivity and rapid capacity fading because of electrode pulverization and aggregation. In this study, a solid-state synthetic strategy is presented that successfully combines nanosize (~ 50 nm) nickel doped α-MnO 2 with reduced graphene oxides as highly stable composite anodes in lithium ion batteries. The synthesis approach is easy to scale up and suitable for industrial applications. Here, the rationally designed Ni-α-MnO 2 /RGO was tested in galvanostatic half coin cells for Li + charge-discharge studies. The results show that this composite maintains a high capacity of 615 mAh g -1 even after 200 cycles at a high current rate of 1 C (830 mA g -1 ), and with a high Coulombic efficiency near 99%. The anodes exhibit excellent rate capability in a wide range of rate testing from 0.2 to 10 C, without showing capacity decay. This superior anode performance is ascribed to the reduced size of α-MnO 2 domains that are well dispersed in an RGO matrix, which affords good ionic/elec. cond., low charge transfer resistance and mitigates issues of vol. expansion of the anodic active materials. This study opens up an avenue for developing the manufacturing of high-performance electrodes for real applications, such as batteries in electrical vehicles.

25 ENERGY STORAGE↗
DOE OSTI2020

Structural Distortion Induced by Manganese Activation in a Lithium-Rich Layered Cathode

The search for batteries with high energy density has highlighted lithium-rich manganese-based layered oxides due to their exceptionally high capacity. Although it is clear that both cationic and anionic redox are present in the charge compensation mechanism, the microstructural evolution of the Li 2 MnO 3 -like phase during anionic redox and its role in battery performance and structural stability are still not fully understood. Here, we systematically probe microstructural evolution using spatially resolved synchrotron X-ray measurements and reveal an underlying interaction between the Li 2 MnO 3 -like domains and bulk rhombohedral structure. Mn ion activation and a previously unobserved structural distortion are discovered at high voltages, and can be related to structural strain present in the Li 2 MnO 3 -like phase upon substantial lithium ion extraction. Moreover, we elucidate a correlation between this structural distortion and irreversible phase transitions by thermally perturbing delithiated samples. These insights highlight a pathway toward achieving high capacity cathode materials required for future commercial applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Modeling High Current Pulsed Discharge in AA Battery Cathodes: The Effect of Localized Charging during Rest

During high current operation, substantial heterogeneity develops within battery cathodes, particularly when their thickness is large. Heterogeneity relaxation during subsequent rest is important for understanding battery performance under pulsed conditions. Localized charge balancing phenomena within batteries at zero net current are not well understood and merit investigation. In this work, the heterogeneity within cathodes of commercial alkaline Zn–MnO 2 batteries is measured during discharge and monitored during rest using energy dispersive X-ray diffraction (EDXRD). Significant gradients in protonation form during discharge and partially relax under rest. It is demonstrated that the proton gradient relaxation is through local redox activity at zero net current, where local (de)protonation works to redistribute charge across the cathode thickness. To support this redox-based relaxation, a fundamental kinetic study on prismatic MnO 2 cathodes is conducted to determine an appropriate model to describe both discharge and charge kinetics of MnO 2 . These kinetics are incorporated into a computational model to simulate the proton gradient formation and partial relaxation under identical discharge conditions as the operando EDXRD experiments. Model and experimental data are found to be in excellent agreement, correctly predicting localized charge balancing at rest.

Batteries↗
DOE OSTI2020

Tuning Oxygen Redox Reaction through the Inductive Effect with Proton Insertion in Li-Rich Oxides

As a parent compound of Li-rich electrodes, Li 2 MnO 3 exhibits high capacity during the initial charge; however, it suffers notoriously low Coulombic efficiency due to oxygen and surface activities. Here, we successfully optimize the oxygen activities toward reversible oxygen redox reactions by intentionally introducing protons into lithium octahedral vacancies in the Li 2 MnO 3 system with its original structural integrity maintained. Combining structural probes, theoretical calculations, and resonant inelastic X-ray scattering results, a moderate coupling between the introduced protons and lattice oxygen at the oxidized state is revealed, which stabilizes the oxygen activities during charging. Such a coupling leads to an unprecedented initial Coulombic efficiency (99.2%) with a greatly improved discharge capacity of 302 mAh g -1 in the protonated Li 2 MnO 3 electrodes. These findings directly demonstrate an effective concept for controlling oxygen activities in Li-rich systems, which is critical for developing high-energy cathodes in batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Phase Stability of Garnet Solid-Electrolyte Interfacing with Various Cathodes in All Solid-State Batteries

Garnet-structured Li 6.75 La 3 Zr 1.75 Ta 0.25 O 12 (LLZTO) is one of the most promising electrolyte materials for solid-state Li batteries (SS-LiB). The design and fabrication of a good cathode/electrolyte interface is an important criterion for the SS-LiB. In this work, we performed a systematic study on the impact of cathode crystal structure and chemical compositions on their chemical stabilities against the LLZTO at elevated temperatures, which are required for their adhesion during cell fabrication processes. X-ray Diffraction (XRD) and Rietveld refinement analyses revealed the chemical stabilities of various cathode materials in contact with the LLZTO. While layered LiCoO 2 cathode showed good stability in contact with LLZTO to 900 °C, LiNiO 2 or Ni-rich LiNi x Mn y Co 1–x–y O 2 (NMC) cathodes suffered from the formation of La 4 NiLiO 8 due to La-diffusion from LLZTO. Furthermore, Mn-rich LiMn 2 O 4 spinel and layered LiNi 1/3 Mn 1/3 Co 1/3 O 2 cathodes suffered from the formation of La 2 Zr 2 O 7 due to Li-diffusion and production of Li 2 MnO 3 . As a result, LiNi 0.6 Mn 0.2 Co 0.2 O 2 , having an ideal balance of Ni/Mn/Co composition, or Li 2 MnO 3 containing cathodes such as Li 1.2 Ni 0.15 Mn 0.55 Co 0.1 O 2 were found to have excellent phase stability as the cathodes for LLZTO-based SS-LiBs.

25 ENERGY STORAGE↗
DOE OSTI2025

Recent Advances in Scalable, High‐Mass Loaded Electrodes for Grid‐Scale Energy Storage

Abstract The increasing electrification of daily life as well as the intermittent characteristic of renewable energy sources require viable solutions for grid‐scale energy storage. Critical considerations for grid storage applications are electrode mass loading and electrode thickness as these features govern battery pack energy density, an important factor in determining manufacturing costs. For this reason, there is increased interest in finding new ways of creating electrodes with high mass loading. In this review, various high‐mass loading fabrication approaches are considered for positive electrode materials used in batteries. The benchmark used for high mass loading is above 20 mg cm −2 , which is higher than the practical limit of conventional tape‐cast electrodes. Several different electrode approaches are described including templating, laser patterning, direct ink writing, and electrodeposition. A variety of materials are covered with the most prominent being LiFe(PO 4 ) (LFP), LiCoO 2 (LCO), and MnO 2 . In research to date, scalable electrochemical performance has been achieved with mass loadings over 100 mg cm −2 . Areal capacities as high as 14.7 mAh cm −2 at 1.82 mA cm −2 have been achieved in non‐aqueous electrolytes and 9.8 mAh cm −2 at 10 mA cm −2 in aqueous electrolytes. These results establish that the mass loading of electrodes can be scaled up without compromising their electrochemical properties.

White, Makena [Department of Materials Science and↗
DOE OSTI2020

Effect of pretreatment conditions on acidity and dehydration activity of CeO 2 -MeO x catalysts

A series of MeOx-modified CeO 2 (CeO 2 -MnO x , CeO 2 -ZnO, CeO 2 -MgO, CeO 2 -CaO, and CeO 2 -Na 2 O) catalysts were prepared by the impregnation of CeO 2 with corresponding metal nitrates. Acidity and oxidation state of cerium were investigated on both oxidized and reduced catalysts by employing Fourier Transform Infrared spectroscopy (FTIR) on adsorbed pyridine and in situ H 2 -Temperature Programmed Reduction/X-ray Absorption Spectroscopy (H 2 -TPR/XAS) techniques, respectively. Metal oxide addition tended to alter both type and number of acid sites on ceria. EXAFS data showed a significant difference in N Ce-O between unmodified and CeO 2 -MeO x , suggesting that added MeO x interferes with vacancy formation on ceria during reduction. Here, in comparison with air-pretreated samples, H 2 -pretreated ones under similar conversion of 1,5 pentanediol exhibited a higher selectivity towards linear alcohols. Alcohol conversion found to correlate with total acidity (i.e., Brønsted and Lewis). CeO 2 benefited from the addition of alkali (Na) or alkaline earth metals (Mg, Ca) by producing unsaturated alcohols.

1,5-Pentanediol↗
DOE OSTI2022

Production of fast-charge Zn-based aqueous batteries via interfacial adsorption of ion-oligomer complexes

Abstract Aqueous zinc batteries are attracting interest because of their potential for cost-effective and safe electricity storage. However, metallic zinc exhibits only moderate reversibility in aqueous electrolytes. To circumvent this issue, we study aqueous Zn batteries able to form nanometric interphases at the Zn metal/liquid electrolyte interface, composed of an ion-oligomer complex. In Zn||Zn symmetric cell studies, we report highly reversible cycling at high current densities and capacities (e.g., 160 mA cm −2 ; 2.6 mAh cm −2 ). By means of quartz-crystal microbalance, nuclear magnetic resonance, and voltammetry measurements we show that the interphase film exists in a dynamic equilibrium with oligomers dissolved in the electrolyte. The interphase strategy is applied to aqueous Zn||I 2 and Zn||MnO 2 cells that are charged/discharged for 12,000 cycles and 1000 cycles, respectively, at a current density of 160 mA cm −2 and capacity of approximately 0.85 mAh cm −2 . Finally, we demonstrate that Zn||I 2 -carbon pouch cells (9 cm 2 area) cycle stably and deliver a specific energy of 151 Wh/kg (based on the total mass of active materials in the electrode) at a charge current density of 56 mA cm −2 .

25 ENERGY STORAGE↗
DOE OSTI2020

Magnesium Todorokite: Influence of Morphology on Electrochemistry in Lithium, Sodium and Magnesium Based Batteries

Samples of Mg-todorokite with mixed nanosheet & nanowire (referred to as nanosheets for the sake of simplicity) and pure nanowire morphology were prepared to probe the morphological impact on battery relevant electrochemistry. The samples had similar physicochemical properties where the Mg-todorokite nanosheets had a composition of Mg 0.20 MnO 2 with a crystallite size of 9 nm and water content of 0.29 moles of H 2 O per formula unit, while the nanowires had a composition of Mg 0.19 MnO 2 with a crystallite size of 14 nm and water content of 0.28. The electrochemistry of the Mg-todorokite materials was evaluated using cyclic voltammetry, galvanostatic cycling, and rate capability testing. The Mg-todorokite nanosheets showed higher discharge capacity than the nanowires in lithium, sodium and magnesium-based electrolytes. Notably, the nanowire materials exhibited excellent cycling stability compared to the nanosheets in lithium and sodium-based batteries. Finally, x-ray absorption spectroscopy (XAS) of lithiated samples suggests that Mn in the nanosheet containing material was more highly reduced to Mn 3+ after the 1st full discharge explaining the higher initial capacities observed. However, a MnO-like structural distortion was observed after extended cycling in the nanosheet material consistent with its poorer capacity retention.

25 ENERGY STORAGE↗
DOE OSTI2020

Plasma enhanced atomic layer deposition of thin film Li 1+x Mn 2-x O 4 for realization of all solid-state 3D lithium-ion microbatteries

Here, the plasma enhanced atomic layer deposition (PEALD) process for MnO 2 was demonstrated, exhibiting self-limiting growth as well as stable composition and stable growth rate over a temperature window of 205–265 °C. The PEALD process for MnO 2 was combined with the thermal ALD process for LiOH to synthesize Li 1+x Mn 2-x O 4 thin film cathodes, where the stoichiometry was effectively controlled to allow for crystallization in the electrochemically active spinel phase. A 3D nanostructure consisting of an Li 1+x Mn 2-x O 4 cathode layer, ALD Li x Al y Si z O solid electrolyte, and SiGe nanowire anode was fabricated and characterized via TEM. The Li 1+x Mn 2-x O 4 thin films maintained 66% of the areal capacity upon a 100× increase in the rate (4–360 μ A cm -2 ) as well as 97% capacity retention over 100 cycles at ~5C. The ALD Li 1+x Mn 2-x O 4 thin films exhibited a volumetric capacity of 52 μ Ah cm -2 μ m -1 at a C-rate of ~0.5C and, coupled with the high operating voltage (4.0 V), offer some of best areal energy densities for ALD thin film cathodes, making it a viable material for integration with 3D lithium-ion microbatteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enhancing the Reaction Kinetics and Stability of Co‐Free Li‐Rich Cathode Materials via a Multifunctional Strategy

Co-free Li-rich layered oxides (CFLLOs) with anionic redox activity are among the most promising cathode materials for high-energy-density and low-cost lithium-ion batteries (LIBs). However, irreversible oxygen release often causes severe structural deterioration, electrolyte decomposition, and the formation of unstable cathode-electrolyte interface (CEI) film with high impedance. Additionally, the elimination of cobalt elements further deteriorates the reaction kinetics, leading to reduced capacity and poor rate performance. Here, in this study, a multifunctional strategy is proposed, incorporating Li 2 MnO 3 phase content regulation, micro-nano structure design, and heteroatom substitution. The increased content of Li 2 MnO 3 phase enhances the capacity through oxygen redox. The smaller nanoscale primary particles induce greater tensile strain and introduce more grain boundaries, thereby improving the reaction kinetics and reactivity, while the larger micron-sized secondary particles help to reduce interfacial side reactions. Furthermore, Na⁺ doping modulates the local coordination environment of oxygen, stabilizing both the anion framework and the crystal structure. As a result, the designed cathode exhibits enhanced rate performance, delivering a capacity of 158 mAh g⁻¹ at 5.0 C and improved cyclic stability, with a high capacity retention of 99% after 400 cycles at 1.0 C. This multifunctional strategy holds great promise for advancing the practical application of CFLLOs in next-generation LIBs.

Co-free Li-rich layered oxide↗
DOE OSTI2020

Spatial quantification of dynamic inter and intra particle crystallographic heterogeneities within lithium ion electrodes

The performance of lithium ion electrodes is hindered by unfavorable chemical heterogeneities that pre-exist or develop during operation. Time-resolved spatial descriptions are needed to understand the link between such heterogeneities and a cell's performance. Here, operando high-resolution X-ray diffraction-computed tomography is used to spatially and temporally quantify crystallographic heterogeneities within and between particles throughout both fresh and degraded Li x Mn 2 O 4 electrodes. This imaging technique facilitates identification of stoichiometric differences between particles and stoichiometric gradients and phase heterogeneities within particles. Through radial quantification of phase fractions, the response of distinct particles to lithiation is found to vary; most particles contain localized regions that transition to rock salt LiMnO 2 within the first cycle. Other particles contain monoclinic Li 2 MnO 3 near the surface and almost pure spinel LixMn2O4 near the core. Following 150 cycles, concentrations of LiMnO 2 and Li 2 MnO 3 significantly increase and widely vary between particles.

25 ENERGY STORAGE↗
DOE OSTI2023

Stabilizing the Deep Sodiation Process in Layered Sodium Manganese Cathodes by Anchoring Boron Ions

Advanced high-energy-density sodium-ion batteries (SIBs) are inseparable from cathode materials with high specific capacities. Layered manganese-rich oxides (Na x MnO 2 , 0.6 ≤ x ≤1) are promising cathode materials owing to their ease of intercalation and extraction of a considerable amount of sodium ions. However, lattice interactions, especially electrostatic repulsive forces and anisotropic stresses, are usually caused by deep desodiatin/sodiation process, resulting in intragranular cracks and capacity degradation in SIBs. Here, boron ions are introduced into the layered structure to build up B-O-Mn bonds. Further, the regulated electronic structure in Na 0.637 B 0.038 MnO 2 (B-NMO) materials inhibits the deformation of MnO 6 octahedra, which finally achieves a gentle structural transition during the deep sodiation process. B-NMO electrode exhibits a high capacity (141 mAh g –1 ) at 1 C with a capacity retention of 81% after 100 cycles. Therefore, anchoring boron to manganese-rich materials inhibits the detrimental structural evolution of deep sodiation and can be used to obtain excellent cathode materials for SIBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Ethane dehydrogenation over manganese oxides supported on ZSM-5 zeolites

Mn-ZSM5 catalysts are shown to have high reaction rates, C 2 H 4 selectivity and stability for the ethane dehydrogenation reaction. The specific reaction rate increases with the Mn loading until the optimal Mn amount of 3.4 wt% for zeolites with a Si/Al ratio of 12. Structure characterizations and spectra analysis have unveiled that this catalyst contains MnO 2 nanoparticles on the zeolite external surface and (MnOH) + groups on the external surface of the zeolite. The MnO 2 nanoparticles contain the catalytic sites for ethane dehydrogenation while the (MnOH) + groups help stabilize the oxide particles, leading to the high stability of the Mn-ZSM5 catalyst for EDH. As a result, the Mn-ZSM5 samples can catalyze EDH for over 150 h at 600 °C with a high reaction rate (>10 mmol C 2 H 6 g cat –1 h –1 ) and high C 2 H 4 selectivity (>98%). Finally, the spent catalyst can also be regenerated by calcination in dry or wet air (3% steam).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Influence of manganese abundances on iron and arsenic solubility in rice paddy soils

Arsenic (As) mobilization in rice paddy soils under fluctuating redox conditions is influenced by the biogeochemical cycling of redox sensitive elements such as iron (Fe) and manganese (Mn). Arsenic mobility in paddy soils is highly variable, and the influence of Mn abundances and Mn/Fe ratios on As mobility in these soils have received little attention. In this contribution, we developed a complementary set of field and laboratory experiments designed to evaluate the impact of Mn on interconnected Fe and As solubilization in rice paddy soils experiencing wetting-drying cycles through controlled irrigation. Porewater monitoring and synchrotron-based imaging and spectroscopy of thin sections prepared from an Arkansas paddy soil confirmed that As release was primarily governed by reductive dissolution of Fe (oxy)hydroxide phases. Experiments with laboratory soil microcosms amended with the synthetic nanocrystalline Mn oxide, δ-MnO 2 , showed that higher initial Mn/Fe inhibited Fe and As mobilization into porewater relative to unamended soil by up to 95% and 45%, respectively. Geochemical modeling suggests that pH increases driven by microbial MnO 2 reduction, in conjunction with microbial Fe- and sulfate-reduction in carbonate-rich porewater, enhanced the precipitation of siderite (FeCO 3(s) ), mackinawite (FeS (s) ), and potentially a Mn(II) arsenate phase. These secondary mineral phases likely played a greater role in controlling As solubilization than the role of Mn as a redox buffer regulating the redox conditions in the flooded soils. Field and laboratory experiments showed that alternate wetting and drying approaches with a single dry-down can be effective at reducing dissolved As concentrations in porewater through the oxidation of Fe. Differences in soil Mn/Fe ratios had no clear impact on the effectiveness of dry-downs as a strategy to reduce As mobilization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Highly reversible oxygen redox in layered compounds enabled by surface polyanions

Oxygen-anion redox in lithium-rich layered oxides can boost the capacity of lithium-ion battery cathodes. However, the over-oxidation of oxygen at highly charged states aggravates irreversible structure changes and deteriorates cycle performance. Here, we investigate the mechanism of surface degradation caused by oxygen oxidation and the kinetics of surface reconstruction. Considering Li 2 MnO 3 , we show through density functional theory calculations that a high energy orbital (lO 2p’ ) at under-coordinated surface oxygen prefers over-oxidation over bulk oxygen, and that surface oxygen release is then kinetically favored during charging. We use a simple strategy of turning under-coordinated surface oxygen into polyanionic (SO 4 ) 2- , and show that these groups stabilize the surface of Li 2 MnO 3 by depressing gas release and side reactions with the electrolyte. Experimental validation on Li 1.2 Ni 0.2 Mn 0.6 O 2 shows that sulfur deposition enhances stability of the cathode with 99.0% capacity remaining (194 mA h g -1 ) after 100 cycles at 1 C. Our work reveals a promising surface treatment to address the instability of highly charged layered cathode materials.

25 ENERGY STORAGE↗