Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model interpretation and visualization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Hardware in the Loop Testing of an Iodine-Fed Hall Thruster

CUBESATS are relatively new spacecraft platforms that are typically deployed from a launch vehicle as a secondary payload,1 providing low-cost access to space for a wide range of end-users. These satellites are comprised of building blocks having dimensions of 10x10x10 cm cu and a mass of 1.33 kg (a 1-U size). While providing low-cost access to space, a major operational limitation is the lack of a propulsion system that can fit within a CubeSat and is capable of executing high delta v maneuvers. This makes it difficult to use CubeSats on missions requiring certain types of maneuvers (i.e. formation flying, spacecraft rendezvous). Recently, work has been performed investigating the use of iodine as a propellant for Hall-effect thrusters (HETs) 2 that could subsequently be used to provide a high specific impulse path to CubeSat propulsion. Iodine stores as a dense solid at very low pressures, making it acceptable as a propellant on a secondary payload. It has exceptionally high ρIsp (density times specific impulse), making it an enabling technology for small satellite near-term applications and providing the potential for systems-level advantages over mid-term high power electric propulsion options. Iodine flow can also be thermally regulated, subliming at relatively low temperature ( less than100 C) to yield I2 vapor at or below 50 torr. At low power, the measured performance of an iodine-fed HET is very similar to that of a state-of-the-art xenon-fed thruster. Just as importantly, the current-voltage discharge characteristics of low power iodine-fed and xenon-fed thrusters are remarkably similar, potentially reducing development and qualifications costs by making it possible to use an already-qualified xenon-HET PPU in an iodine-fed system. Finally, a cold surface can be installed in a vacuum test chamber on which expended iodine propellant can deposit. In addition, the temperature doesn't have to be extremely cold to maintain a low vapor pressure in the vacuum chamber (it is under 10(exp -6) torr at -75 C), making it possible to 'cryopump' the propellant with lower-cost recirculating refrigerant-based systems as opposed to using liquid nitrogen or low temperature gaseous helium cryopanels. In the present paper, we describe testing performed using an iodine-fed 200 W Hall thruster mounted to a thrust stand and operated in conjunction with MSFCs Small Projects Rapid Integration and Test Environment (SPRITE) Portable Hardware In the Loop (PHIL) hardware. This work is performed in support of the iodine satellite (iSAT) project, which aims to fly a 200-W iodine-fed thruster on a 12-U CubeSat. The SPRITE PHIL hardware allows a given vehicle to do a checkout of its avionics algorithm by allowing it to monitor and feed data to simulated sensors and effectors in a digital environment. These data are then used to determine the attitude of the vehicle and a separate computer is used to interpret the data set and visualize it using a 3D graphical interface. The PHIL hardware allows the testing of the vehicles bus by providing 'real' hardware interfaces (in the case of this test a real RS422 bus) and specific components can be modeled to show their interactions with the avionics algorithm (e.g. a thruster model). For the iSAT project the PHIL is used to visualize the operating cycle of the thruster and the subsequent effect this thrusting has on the attitude of the satellite over a given period of time. The test is controlled using software running on an Andrews Space Cortex 160 flight computer. This computer is the current baseline for a full iSAT mission. While the test could be conducted with a lab computer and software, the team chose to exercise the propulsion system with a representative CubeSat-class computer. For purposes of this test, the "flight" software monitored the propulsion and PPU systems, controlled operation of the thruster, and provided thruster state data to the PHIL simulation. Commands to operate the thruster were initiated from an operator's workstation outside the vacuum chamber and passed through the Cortex 160 to exercise portions of the flight avionics. Two custom-designed pieces of electronics hardware have been designed to operate the propellant feed system. One piece of hardware is an auxiliary board that controls a latch valve, proportional flow control valves (PFCVs) and valve heaters as well as measuring pressures, temperatures and PFCV feedback voltage. An onboard FPGA provides a serial link for issuing commands and manages all lower level input-output functions. The other piece of hardware is a power distribution board, which accepts a standard bus voltage input and converts this voltage into all the different current-voltage types required to operate the auxiliary board. These electronics boards are located in the vacuum chamber near the thruster, exposing this hardware to both the vacuum and plasma environments they would encounter during a mission, with these components communicating to the flight computer through an RS-422 interface. The auxiliary board FPGA provides a 28V MOSFET switch circuit with a 20ms pulse to open or close the iodine propellant feed system latch valve. The FPGA provides a pulse width modulation (PWM) signal to a DC/DC boost converter to produce the 12-120V needed for control of the proportional flow control valve. There are eight MOSFET-switched heating circuits in the system. Heaters are 28V and located in the latch valve, PFCV, propellant tank and propellant feed lines. Both the latch valve and PFCV have thermistors built into them for temperature monitoring. There are also seven resistance temperature device (RTD) circuits on the auxiliary board that can be used to measure the propellant tank and feedline temperatures. The signals are conditioned and sent to an analog to digital converter (ADC), which is directly commanded and controlled by the FPGA.

Polzin, Kurt A.↗
DOE OSTI2026

MCNPy

SAND2026-20425O MCNPy runs and analyzes simulations from MCNP, a software that models radiation transport of neutrons and gamma rays. MCNPy uses Python to start MCNP, retrieve event data files, and convert them into graph structures for detailed analysis. It offers visualization tools, including 2D views of particle histories, making complex simulation data easier to interpret for researchers and engineers. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525.

Nowack, Aaron [Sandia National Lab. (SNL-CA), Live↗
DOE OSTI2026

Data, model inputs, and analysis scripts associated with a manuscript on stream intermittency controls across spatial scales in Pacific Northwest watersheds

NOTE: The manuscript associated with this data package is currently in review. The data may be revised based on reviewer feedback. Upon manuscript acceptance, this data package will be updated with the final dataset and additional metadata. This data package is associated with the manuscript "Hydroclimatic Memory and Watershed Template Shape Stream Intermittency: Multi-scale Attribution Using Process-based Simulation and Explainable ML" by Niroula et al. (2026), submitted to Water Resources Research (WRR). The study investigates the dominant controls on stream intermittency across local, reach, and watershed scales using a coupled process-based simulation and explainable machine-learning framework. Long-term daily simulations from the Advanced Terrestrial Simulator (ATS) were used to generate wetness states and ponded-depth responses over river-corridor cells. These ATS outputs were then aggregated across scales and used to train XGBoost (eXtreme Gradient Boosting) models. SHAP (SHapley Additive exPlanations) was applied to quantify the relative importance of hydroclimatic forcings, watershed template attributes, and antecedent-memory effects in shaping intermittency behavior. The analysis is carried out for three contrasting Pacific Northwest watersheds: Oak Creek (OCW), American River Watershed (ARW), and H.J. Andrews (HJA). Across these testbeds, the package contains ATS-ready watershed inputs, ATS run configuration and selected output files, model-evaluation data products, intermittency-analysis datasets, machine-learning target-feature tables, SHAP outputs, and notebooks used to organize, analyze, and visualize results. At a high level, the package documents a workflow in which ATS provides the physically based simulation backbone and explainable machine learning is used as a post-processing attribution tool. The contents are intended to support interpretation of the manuscript figures and results, provide context for how intermittency metrics were generated at multiple scales, and preserve the key artifacts needed to understand and reuse the analysis workflow. The package contains a high-level directory summary file (`summary.txt`) and four main content folders (1) `evaluation_plots` contains evaluation figures and supporting evaluation datasets; (2) `intermittency_plots` contains intermittency-focused analysis notebook and prepared datasets; (3) `ml-training-and-shap_values_plots` contains ML training inputs, SHAP outputs, and figure-generation notebooks; and (4) `watershed_mesh_and_ats_input` contains ATS model setup materials, forcing inputs, geometry, and selected run files. More specifically, the `evaluation_plots` folder contains the notebook used for ATS evaluation plotting and site-specific evaluation datasets. These include evapotranspiration and water-balance products for three watersheds, as well as an Oak Creek field-measurement discharge file. The `intermittency_plots` folder contains the notebook used for intermittency analysis and the prepared datasets used to analyze intermittent and non-intermittent wetness behavior across the study watersheds. The `ml-training-and-shap_values_plots` folder contains notebooks and outputs for the machine-learning and explainability workflow. This includes the main XGBoost and SHAP notebook(s), a beeswarm plotting notebook, target-feature tables for machine-learning training, SHAP summary tables, and per-sample SHAP value archives. The `watershed_mesh_and_ats_input` folder contains ATS-related watershed inputs and supporting materials. This includes mesh and shape products, ATS-readable LAI and meteorological forcing inputs, selected ATS spinup and transient-run files, and a watershed workflow example notebook. Subdirectories are organized by watershed where applicable.All files are .cpg (codepage files), .csv (comma-separated values), .dbf (database files), .exo (Exodus mesh format), .h5 (HDF5 format), .ipynb (Jupyter notebooks), .pkl (Python pickle), .prj (projection files), .sh (shell scripts), .shp (shapefile geometry), .shx (shapefile index), .txt (text files), or .xml (markup data).

Advanced Terrestrial Simulator↗
DOE OSTI2025

Meeting Global Health Needs via Infectious Disease Forecasting: Development of a Reliable Data-Driven Framework

Infectious diseases (IDs) have a significant detrimental impact on global health. Timely and accurate ID forecasting can result in more informed implementation of control measures and prevention policies. To meet the operational decision-making needs of real-world circumstances, we aimed to build a standardized, reliable, and trustworthy ID forecasting pipeline and visualization dashboard that is generalizable across a wide range of modeling techniques, IDs, and global locations. We forecasted 6 diverse, zoonotic diseases (brucellosis, campylobacteriosis, Middle East respiratory syndrome, Q fever, tick-borne encephalitis, and tularemia) across 4 continents and 8 countries. We included a wide range of statistical, machine learning, and deep learning models (n=9) and trained them on a multitude of features (average n=2326) within the One Health landscape, including demography, landscape, climate, and socioeconomic factors. The pipeline and dashboard were created in consideration of crucial operational metrics—prediction accuracy, computational efficiency, spatiotemporal generalizability, uncertainty quantification, and interpretability—which are essential to strategic data-driven decisions. While no single best model was suitable for all disease, region, and country combinations, our ensemble technique selects the best-performing model for each given scenario to achieve the closest prediction. For new or emerging diseases in a region, the ensemble model can predict how the disease may behave in the new region using a pretrained model from a similar region with a history of that disease. The data visualization dashboard provides a clean interface of important analytical metrics, such as ID temporal patterns, forecasts, prediction uncertainties, and model feature importance across all geographic locations and disease combinations. As the need for real-time, operational ID forecasting capabilities increases, this standardized and automated platform for data collection, analysis, and reporting is a major step forward in enabling evidence-based public health decisions and policies for the prevention and mitigation of future ID outbreaks.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1982

Spatially resolved reflectivities of Saturn - 3000-6000 A

Absolute reflectivity reductions are presented for spectrophotometric observations of seven spatially-resolved regions on the disk of Saturn in the 3000-6000 A region. An asymmetry is found between northern and southern hemisphere data, in the equivalent width of the CH4, 5430-A band and in the continuum reflectivity. In addition, the spectra are found not to include the 4700 A reflectivity peak found by Bergstralh et al (1981), and to exhibit general agreement with the Podolack and Danielson (1977) model. The blue and visual spectral region continuum reflectivity of a planetary atmosphere provides constraints for determining aerosol particle single-scattering albedo and vertical distribution, which are in turn important to an understanding of planetary energy balance, atmospheric dynamics, and planetary molecular absorption spectrum interpretation.

Cochran, W. D.↗
NASA NTRS2016

Polarbrdf: A General Purpose Python Package for Visualization Quantitative Analysis of Multi-Angular Remote Sensing Measurements

The Bidirectional Reflectance Distribution Function (BRDF) is a fundamental concept for characterizing the reflectance property of a surface, and helps in the analysis of remote sensing data from satellite, airborne and surface platforms. Multi-angular remote sensing measurements are required for the development and evaluation of BRDF models for improved characterization of surface properties. However, multi-angular data and the associated BRDF models are typically multidimensional involving multi-angular and multi-wavelength information. Effective visualization of such complex multidimensional measurements for different wavelength combinations is presently somewhat lacking in the literature, and could serve as a potentially useful research and teaching tool in aiding both interpretation and analysis of BRDF measurements. This article describes a newly developed software package in Python (PolarBRDF) to help visualize and analyze multi-angular data in polar and False Color Composite (FCC) forms. PolarBRDF also includes functionalities for computing important multi-angular reflectance/albedo parameters including spectral albedo, principal plane reflectance and spectral reflectance slope. Application of PolarBRDF is demonstrated using various case studies obtained from airborne multi-angular remote sensing measurements using NASA's Cloud Absorption Radiometer (CAR). Our visualization program also provides functionalities for untangling complex surface/atmosphere features embedded in pixel-based remote sensing measurements, such as the FCC imagery generation of BRDF measurements of grasslands in the presence of wild fire smoke and clouds. Furthermore, PolarBRDF also provides quantitative information of the angular distribution of scattered surface/atmosphere radiation, in the form of relevant BRDF variables such as sunglint, hotspot and scattering statistics.

CAR↗
NASA NTRS1995

Managing Complexity in Multidisciplinary Visualization

As high performance computing technology progresses, computational simulations are becoming more advanced in their capabilities. In the computational aerosciences domain, single discipline steady-state simulations computed on a single grid are far from the state-of-the-art. In their place are complex, time-dependent multidisciplinary simulations that attempt to model a given geometry more realistically. The product of these multidisciplinary simulations is a massive amount of data stored in different formats, grid topologies, units of measure, etc., as a result of the differences in the simulated physical domains. In addition to the challenges posed by setting up and performing the simulation, additional challenges exist in analyzing computational results. Visualization plays an important role in the advancement of multidisciplinary simulations. To date, visualization has been used to aid in the interpretation of large amounts of simulation data. Because the human visual system is effective in digesting a large amount of information presented graphically, visualization has helped simulation scientists to understand complex simulation results. As these simulations become even more complex, integrating several different physical domains, visualization will be critical to digest the massive amount of information. Another important role for visualization is to provide a common communication medium from which the domain scientists can use to develop, debug, and analyze their work. Multidisciplinary analyses are the next step in simulation technology, not only in computational aerosciences, but in many other areas such as global climate modeling. Visualization researchers must understand and work towards the challenges posed by multidisciplinary simulation scenarios. This paper addresses some of these challenges, describing technologies that must be investigated to create a useful visualization analysis tool for domain scientists.

Miceli, Kristina D.↗
NASA NTRS1976

Flow Visualization Tests of a 0.004-scale Space Shuttle Vehicle 2A Model (no. 13-OTS) in the MSFC 14-inch Trisonic Wind Tunnel (IS6A)

Documented are representative photographs of surface flow patterns, created by oil flow and shadowgraph techniques, obtained during wind tunnel tests of an 0.004-scale version of the 2A SSV orbiter. The purpose of this test series was to obtain flow visualization photographs to aid in interpretation of test IS1 aero-noise data. The test was conducted at nominal Mach numbers from 0.6 to 3.48. The orbiter was run in proximity to the external tank and solid rocket boosters at angles of attack from -5 deg to +9 deg at 0 deg angle of sideslip.

Hawthorne, P. J.↗
NASA NTRS2014

Spherical Coordinate Systems for Streamlining Suited Mobility Analysis

When describing human motion, biomechanists generally report joint angles in terms of Euler angle rotation sequences. However, there are known limitations in using this method to describe complex motions such as the shoulder joint during a baseball pitch. Euler angle notation uses a series of three rotations about an axis where each rotation is dependent upon the preceding rotation. As such, the Euler angles need to be regarded as a set to get accurate angle information. Unfortunately, it is often difficult to visualize and understand these complex motion representations. One of our key functions is to help design engineers understand how a human will perform with new designs and all too often traditional use of Euler rotations becomes as much of a hindrance as a help. It is believed that using a spherical coordinate system will allow ABF personnel to more quickly and easily transmit important mobility data to engineers, in a format that is readily understandable and directly translatable to their design efforts. Objectives: The goal of this project is to establish new analysis and visualization techniques to aid in the examination and comprehension of complex motions. Methods: This project consisted of a series of small sub‐projects, meant to validate and verify the method before it was implemented in the ABF's data analysis practices. The first stage was a proof of concept, where a mechanical test rig was built and instrumented with an inclinometer, so that its angle from horizontal was known. The test rig was tracked in 3D using an optical motion capture system, and its position and orientation were reported in both Euler and spherical reference systems. The rig was meant to simulate flexion/extension, transverse rotation and abduction/adduction of the human shoulder, but without the variability inherent in human motion. In the second phase of the project, the ABF estimated the error inherent in a spherical coordinate system, and evaluated how this error would vary within the reference frame. This stage also involved expanding a kinematic model of the shoulder, to include the torso, knees, ankle, elbows, wrists and neck. Part of this update included adding a representation of 'roll' about an axis, for upper arm and lower leg rotations. The third stage of the project involved creating visualization methods to assist in interpreting motion in a spherical frame. This visualization method will be incorporated in a tool to evaluate a database of suited mobility data, which is currently in development.

Benson, Elizabeth↗
NASA NTRS1984

A new interpretation of internal heat transfer coefficients of porous media

The results of laser anemometer and flow visualization based fluid mechanics studies of porous media are used to obtain heat transfer coefficients for porous materials. Average pore flow Re ranging from 0.16-700 were examined. Darcy, inertial steady laminar, unsteady laminar and turbulent flow regimes were detected. A passage length model was devised to derive the heat transfer coefficient. Sample data from flows through porous metals composed of powders and fibers validated the passage length for Darcy and inertial flow regimes. Unsteady laminar and turbulent flow coefficients require the identification of new parameters.

Dybbs, A.↗
DOE OSTI2025

Poster Abstract: Leveraging Large Language Models to Reveal Interpretable Cooling Behaviors from Smart Thermostat Data

Frequent heatwaves and hot summers increasingly challenge occupant comfort, health, and energy grid stability. Addressing these challenges requires a detailed understanding of household cooling behaviors, such as thermostat adjustments and adaptive responses to extreme conditions. Traditional analyses often rely on aggregated numerical metrics that overlook subtle but important household-specific variations. In this study, we introduce a generalizable methodology that integrates large language models (LLMs) with vision capabilities to enable scalable and detailed analysis of residential thermostat data. Using Ecobee's Donate Your Data (DYD) dataset—which provides five-minute records of indoor temperatures, thermostat setpoints, and HVAC runtimes—we focus on two U.S. cities with contrasting summer climates : Austin (TX) and Phoenix (AZ). Because raw time-series data are not well suited for direct LLM analysis, we transform them into visual representations, such as daily indoor temperature trajectories and weekly runtime histograms, to better capture behavioral variations. Leveraging LLMs' visual interpretation, we extract descriptive behavioral features, including temperature preferences, time-of-day cooling orientation, anticipatory versus reactive heatwave responses, and behavioral consistency. These semantic features support unsupervised clustering to identify distinct occupant archetypes at scale, revealing differences—such as morning-centric anticipatory coolers versus households that shift toward warmer setpoints during heatwaves—that can inform demand response, resilience planning, and health-aware interventions. By converting raw numerical data into interpretable behavioral patterns, this methodology enables scalable and practical analysis of occupant behavior, supporting actionable insights for comfort, resilience, and energy management.

Nihar, Kopal↗
NASA NTRS1982

Remote sensing of salinity in the San Francisco Bay Delta

Landsat multispectral scanner data and color and color infrared photographs acquired from a U-2 aircraft are combined with surface measurements for salinity mapping of the San Fransisco Bay Delta. A regression model is developed between the surface truth data and Landsat digital data for 29 sample sites, and is then extended over the entire study area. Results are in general agreement with reported salinity distribution values. It appears to be impossible to establish any quantitative judgement regarding the salinity values by visual interpretation of the imagery within the test site.

Khorram, S.↗
NASA NTRS1983

Filamentary galaxy clustering - A mapping algorithm

A simple and objective algorithm is presented which not only accurately identifies the filamentary structures in the Shane-Wirtanen galaxy count catalog, but also finds a set of visually less impressive filaments in a static hierarchical model of the clustering conducted by Soneira and Peebles (1978). The statistical properties of the elements in the model, while very similar to those in the data, show a significant excess of long and bright filaments in the data relative to the model. Two possible interpretations of these results are presented and discussed.

Gott, J. R., III↗
NASA NTRS2016

Investigating the Simulink Auto-Coding Process

Model based program design is the most clear and direct way to develop algorithms and programs for interfacing with hardware. While coding "by hand" results in a more tailored product, the ever-growing size and complexity of modern-day applications can cause the project work load to quickly become unreasonable for one programmer. This has generally been addressed by splitting the product into separate modules to allow multiple developers to work in parallel on the same project, however this introduces new potentials for errors in the process. The fluidity, reliability and robustness of the code relies on the abilities of the programmers to communicate their methods to one another; furthermore, multiple programmers invites multiple potentially differing coding styles into the same product, which can cause a loss of readability or even module incompatibility. Fortunately, Mathworks has implemented an auto-coding feature that allows programmers to design their algorithms through the use of models and diagrams in the graphical programming environment Simulink, allowing the designer to visually determine what the hardware is to do. From here, the auto-coding feature handles converting the project into another programming language. This type of approach allows the designer to clearly see how the software will be directing the hardware without the need to try and interpret large amounts of code. In addition, it speeds up the programming process, minimizing the amount of man-hours spent on a single project, thus reducing the chance of human error as well as project turnover time. One such project that has benefited from the auto-coding procedure is Ramses, a portion of the GNC flight software on-board Orion that has been implemented primarily in Simulink. Currently, however, auto-coding Ramses into C++ requires 5 hours of code generation time. This causes issues if the tool ever needs to be debugged, as this code generation will need to occur with each edit to any part of the program; additionally, this is lost time that could be spent testing and analyzing the code. This is one of the more prominent issues with the auto-coding process, and while much information is available with regard to optimizing Simulink designs to produce efficient and reliable C++ code, not much research has been made public on how to reduce the code generation time. It is of interest to develop some insight as to what causes code generation times to be so significant, and determine if there are architecture guidelines or a desirable auto-coding configuration set to assist in streamlining this step of the design process for particular applications. To address the issue at hand, the Simulink coder was studied at a foundational level. For each different component type made available by the software, the features, auto-code generation time, and the format of the generated code were analyzed and documented. Tools were developed and documented to expedite these studies, particularly in the area of automating sequential builds to ensure accurate data was obtained. Next, the Ramses model was examined in an attempt to determine the composition and the types of technologies used in the model. This enabled the development of a model that uses similar technologies, but takes a fraction of the time to auto-code to reduce the turnaround time for experimentation. Lastly, the model was used to run a wide array of experiments and collect data to obtain knowledge about where to search for bottlenecks in the Ramses model. The resulting contributions of the overall effort consist of an experimental model for further investigation into the subject, as well as several automation tools to assist in analyzing the model, and a reference document offering insight to the auto-coding process, including documentation of the tools used in the model analysis, data illustrating some potential problem areas in the auto-coding process, and recommendations on areas or practices in the current Ramses model that should be further investigated. Several skills were required to be built up over the course of the internship project. First and foremost, my Simulink skills have improved drastically, as much of my experience had been modeling electronic circuits as opposed to software models. Furthermore, I am now comfortable working with the Simulink Auto-coder, a tool I had never used until this summer; this tool also tested my critical thinking and C++ knowledge as I had to interpret the C++ code it was generating and attempt to understand how the Simulink model affected the generated code. I had come into the internship with a solid understanding of Matlab code, but had done very little in using it to automate tasks, particularly Simulink tasks; along the same lines, I had rarely used shell script to automate and interface with programs, which I gained a fair amount of experience with this summer, including how to use regular expression. Lastly, soft-skills are an area everyone can continuously improve on; having never worked with NASA engineers, which to me seem to be a completely different breed than what I am used to (commercial electronic engineers), I learned to utilize the wealth of knowledge present at JSC. I wish I had come into the internship knowing exactly how helpful everyone in my branch would be, as I would have picked up on this sooner. I hope that having gained such a strong foundation in Simulink over this summer will open the opportunity to return to work on this project, or potentially other opportunities within the division. The idea of leaving a project I devoted ten weeks to is a hard one to cope with, so having the chance to pick up where I left off sounds appealing; alternatively, I am interested to see if there are any opening in the future that would allow me to work on a project that is more in-line with my research in estimation algorithms. Regardless, this summer has been a milestone in my professional career, and I hope this has started a long-term relationship between JSC and myself. I really enjoy the thought of building on my experience here over future summers while I work to complete my PhD at Missouri University of Science and Technology.

Gualdoni, Matthew J.↗
NASA NTRS1972

The physical properties of the Jovian atmosphere inferred from eclipses of the Galilean satellites. II - 1971 apparition.

Further simultaneous two-color photoelectric photometry of Ganymede was carried out at blue (4500 A) and yellow (5790 A) wavelengths during its eclipse by Jupiter on Mar. 10, 1971. In both colors, the shape of the ingress light curve was again reliably determined for extinctions up to 9 mag. Neither curve showed any evidence of a refraction tail. The observations have been interpreted in terms of the local optical transmission properties of the Jovian atmosphere. At gas number densities of about 5 x 10 to the 18th power per cu cm the maximum photon scattering mean free path at visual wavelengths was 47 km atm. Evidence indicates that neither a simple reflecting-layer model or a semiinfinite homogeneous scattering model provides an adequate physical description of the atmosphere.

Price, M. J.↗
NASA NTRS1986

Exogenic and endogenic albedo and color patterns on Europa

New global and high-resolution multispectral mosaics of Europa have been produced from the Voyager imaging data. Photometric normalizations are based on multiple-image techniques that explicitly account for intrinsic albedo variations through pixel-by-pixel solutions. The exogenic color and albedo pattern on Europa is described by a second-order function of the cosine of the angular distance from the apex of orbital motion. On the basis of this second-order function and of color trends that are different on the leading and trailing hemispheres, the exogenic pattern is interpreted as being due to equilibrium between two dominant processes: (1) impact gardening and (2) magnetospheric interactions, including sulfur-ion implantation and sputtering redistribution. Removal of the model exogenic pattern in the mosaics reveals the endogenic variations, consisting of only two major units: darker (redder) and bright materials. Therefore Europa's visual spectral reflectivity is simple, having one continuous exogenic pattern and two discrete endogenic units.

Mcewen, A. S.↗
NASA NTRS1985

High pressure cosmochemistry applied to major planetary interiors: Experimental studies

The measurement of equilibria in binary fluid-solid systems in diamond anvil cells, represents a major advance of the art of high-pressure experimentation. Vibrational spectroscopy, direct visual observations, and X-ray diffraction crystallography of materials confined in externally heated cells are the primary experimental probes being used. Adiabats in these systems are being measured in order to constrain models of heat flow in these bodies and to detect phase transitions by thermal anomalies. Other studies are directed toward interpreting high pressure reactions in these systems that are suggested by shockwave measurements, and developing methods for reaching high temperatures and high pressures of planetary interest in diamond cells. The overall objective of this project is to determine the properties of the H2-He-H2O-HN3-CH4 system and related small-molecule systems that are needed to constrain theoretical models of the interiors of the major planets.

Nicol, M. F.↗
NASA NTRSDate not supplied

Single-Cell Analysis of Yeast (Saccharomyces cerevisiae) Using Hydrogel Encapsulation

Space radiation poses a major health risk to astronauts. To fulfill NASA’s mission of exploration beyond Earth, the biological effects of Galactic Cosmic Radiation and gamma radiation must be investigated to elucidate cellular damage mechanisms and inform countermeasure protocols to safely bring humans beyond Earth’s magnetosphere. Budding yeast (Saccharomyces cerevisiae) are commonly used in experiments as a model organism for studying the effects of radiation on eukaryotes. Radiobiology of yeast at the single cell level is poorly understood, yet crucial for informing models to aid in the design and interpretation of experiments. We are using a novel method of microencapsulation in hydrogel particles (PicoShells) to enable analysis of the distribution of radiation-induced damage among yeast cells at the single-cell level, in high throughput. Here we describe the development of methods for culturing, visualization, and quantification of encapsulated yeast. The encapsulated yeast are cultured in Yeast extract-Peptone-Dextrose (YPD) medium, fixed in formaldehyde or ethanol, and stained with DAPI or propidium iodide, then visualized using microscopy or enumerated using flow cytometry, with the aim of developing a protocol to enumerate the distribution of viable cells in each PicoShell. This will allow us to quantify how different forms of radiation can generate different distributions of damage across a population of cells, ultimately providing insight into the biological effects of space-relevant ionizing radiation.

yeast↗