Search NASA⌕ Search

SEARCH · Search NASA

Results for “Morphology control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Mapping Competitive Reduction upon Charging in LiNi 0.8 Co 0.15 Al 0.05 O 2 Primary Particles

Side reactions involving surface reduction play a critical role in the failure of LiNi 0.8 Co 0.15 Al 0.05 O 2 to reach its theoretical capacity as a cathode material for Li-ion batteries. While macroscopic consequences are known, the underlying nanoscopic mechanisms are not fully elucidated. By coupling X-ray spectroscopy with several X-ray microscopy modalities, we have spatially resolved the extent of Ni oxidation at several states of charge and uncovered heterogeneity that is hidden when considering ensemble measurements alone. The use of morphologically controlled particles enabled high-resolution imaging of these materials, uncovering gradients of Ni oxidation states within individual primary particles. At high states of charge, these gradients revealed regions of possible oxygen deficiency extending deeper into the particle than previously observed. Surface-sensitive X-ray coupled scanning tunneling microscopy allows oxidation states to be measured at the material's surface, showing predominantly Ni II in the first atomic layer and mixtures of Ni II with Ni III /Ni IV already appearing 1.5 nm into the particle. These results reveal the subtle interplay between irreversible surface transformations and the bulk reactions that ultimately define function, which will refine strategies of surface passivation that are key to overcoming current performance limitations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Quantifying Species Populations in Multivalent Borohydride Electrolytes

Multivalent batteries represent an important beyond Li-ion energy storage concept. The prospect of calcium batteries, in particular, has emerged recently due to novel electrolyte demonstrations, especially that of a ground-breaking combination of the borohydride salt Ca(BH 4 ) 2 dissolved in tetrahydrofuran. Recent analysis of magnesium and calcium versions of this electrolyte led to the identification of divergent speciation pathways for Mg 2+ and Ca 2+ despite identical anions and solvents, owing to differences in cation size and attendant flexibility of coordination. To test these proposed speciation equilibria and develop a more quantitative understanding thereof, we have applied pulsed-field-gradient nuclear magnetic resonance and dielectric relaxation spectroscopy to study these electrolytes. Additionally, concentration-dependent variation in anion diffusivities and solution dipole relaxations, interpreted with the aid of molecular dynamics simulations, confirms these divergent Mg 2+ and Ca 2+ speciation pathways. These results provide a more quantitative description of the electroactive species populations. We find that these species are present in relatively small quantities, even in the highly active Ca(BH 4 ) 2 /tetrahydrofuran electrolyte. This finding helps interpret previous characterizations of metal deposition efficiency and morphology control and thus provides important fundamental insight into the dynamic properties of multivalent electrolytes for next-generation batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Understanding Solution State Conformation and Aggregate Structure of Conjugated Polymers via Small Angle X-ray Scattering

Donor-acceptor (D-A) conjugated polymers are high-performance organic electronic materials that exhibit complex aggregation behavior. Understanding the solution state conformation and aggregation of conjugated polymers is crucial for controlling morphology during thin-film deposition and the subsequent electronic performance. However, a precise multiscale structure of solution state aggregates is lacking. Here, we present an in-depth small-angle X-ray scattering (SAXS) analysis of the solution state structure of an isoindigo-bithiophene-based D-A polymer (PII-2T) in chlorobenzene and decane as our primary system. Modeling the system as a combination of hierarchical fibrillar aggregates mixed with dispersed polymers, we extract information about conformation and multiscale aggregation and also clarify the physical origin of features often observed but unaddressed or misinterpreted in small-angle scattering patterns of conjugated polymers. The persistence length of the D-A polymer extracted from SAXS agrees well with a theoretical model based on the dihedral potentials. Additionally, we show that the broad high q structure factor peak seen in scattering profiles can be attributed to lamellar stacking occurring within the fibril aggregates and that the low q aggregate scattering is strongly influenced by the polymer molecular weight. Overall, the SAXS profiles of D-A polymers in general exhibit a sensitive dependence on the co-existence of fibrillar aggregate and dispersed polymer chain populations. We corroborate our findings from SAXS with electron microscopy of freeze-dried samples for direct imaging of fibrillar aggregates. Finally, we demonstrate the generality of our approach by fitting the scattering profiles of a variety of D-A polymers based on thieno-isoindigo (PTII-2T), diketopyrrolopyrrole (DPP2T-TT, DPP-BTZ, PDPP2FT-C- 16 ), naphthalenediimide (P(NDI2OD-T2)), and a conjugated block copolymer P3HT-b-DPPT-T. The results presented here establish a picture of the D-A polymer solution state structure and provide a general method of interpreting and analyzing their scattering profiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Aligned Conjugated Polymer Nanofiber Networks in an Elastomer Matrix for High-Performance Printed Stretchable Electronics

Conjugated polymer films are promising in wearable X-ray detection. However, achieving optimal film microstructure possessing good electrical and detection performance under large deformation via scalable printing remains challenging. Herein, we report bar-coated high-performance stretchable films based on a conjugated polymer P(TDPP-Se) and elastomer SEBS blend by optimizing the solution-processing conditions. The moderate preaggregation in solution and prolonged growth dynamics from a solvent mixture with limited dissolving capacity is critical to forming aligned P(TDPP-Se) chains/crystalline nanofibers in the SEBS phase with enhanced π–π stacking for charge transport and stress dissipation. The film shows a large elongation at break of >400% and high mobilities of 5.29 cm 2 V –1 s –1 at 0% strain and 1.66 cm 2 V –1 s –1 over 500 stretch–release cycles at 50% strain, enabling good X-ray imaging with a high sensitivity of 1501.52 μC Gy air –1 cm –2 . Finally, our work provides a morphology control strategy toward high-performance conjugated polymer film-based stretchable electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Direct Visualization of Laser-Induced Coalescence and Alloying of Au into Ag Nanowires

Noble metal nanocomposites with controlled morphology and composition have been largely useful in a wide variety of applications like catalysis, plasmonics, and biological applications. Herein, we show pulsed-laser-assisted fabrication of beaded Au-Ag nanowires with a variety of morphologies and compositions via coalescence and alloying of Au nanoparticles (NP) into a Ag nanowire (NW). Direct visualization of the evolution process with in situ laser heating transmission electron microscopy (ILH-TEM) leads to unambiguous insights into the mechanism of formation for the first time. Ag, being a soft material, melts at the surface to bridge the gap between the NP-NW, forming a cup-like morphology underneath the Au NP via capillary action. Progressive laser irradiation leads to wetting of the Au NP with Ag, forming an envelope around the NP. This is associated with the formation of a valley in Ag NW around the NP, which flattens gradually by partial embedding of the NP. Interdiffusion of Au into Ag and vice versa sets in at this stage, leading to the depletion of Au from the Au-rich NP region. Prolonged irradiation leads to gradual intermixing of Au-Ag forming beaded Au-doped Ag nanowires with homogeneous composition. Such a step-by-step understanding of the coalescence and alloying process has implications in nanowelding, which holds the future in designing efficient transparent conductors and printed electronics.

Isik, Tugba↗
DOE OSTI2021

CO 2 Methanation on Cu-Cluster Decorated Zirconia Supports with Different Morphology: A Combined Experimental In Situ GIXANES/GISAXS, Ex Situ XPS and Theoretical DFT Study

We report that subnanometer copper tetramer-zirconia catalysts turn out to be highly efficient for CO 2 hydrogenation and its conversion to methane. The cluster size and substrate morphology are controlled to optimize the catalytic performance. The two types of zirconia supports investigated are prepared by atomic layer deposition (~ 3 nm thick film) and supersonic cluster beam deposition (nanostructured film, ~ 100 nm thick). The substrate plays a crucial role in determining the activity of the catalyst as well as its cyclability over repeated thermal ramps. A temperature-programmed reaction combined with in situ X-ray characterization reveals the correlation between the evolution in the oxidation state and catalytic activity. Ex situ photoelectron spectroscopy indicates Cu clusters with stronger interactions with the nanostructured film, which can be the cause for the higher activity of this catalyst. Density functional theory calculations based on the Cu 4 O 2 cluster supported on a ZrOx subunit reveal low activation barriers and provide mechanism for CO 2 hydrogenation and its conversion to methane. Altogether, the results show a new way to tune the catalytic activity of CO 2 hydrogenation catalysts through controlling the morphology of the support at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

NMR Studies of Block Copolymer-Based Supramolecules in Solution

Hierarchical assemblies from block copolymer (BCP)-based supramolecules have shown immense potential as programmable materials owing to their versatility for incorporating functional molecules and provide access to arrays of hierarchical structures. However, there remains a knowledge gap on the formation of the supramolecule in solution. Here, we applied NMR techniques to investigate the solution-phase behavior of the most studied supramolecular systems, polystyrene-block-poly(4-vinylpyridine)(3-pentadecylphenol) (PS-b-P4VP(PDP) r ). The results show that the supramolecule likely adopts a coil-comb conformation, despite the small molecule's (PDP) rapid exchange between the bonded and free states. The exchange rate (>10 4 s -1 ) exceeds the NMR time scale at the frequency of interest. The supramolecules form under dilute conditions (~2 vol %) and are attributed to the enthalpic gain of the hydrogen bonding between the PDP and 4VP. As the solute concentration increases (>10 vol %), the supramolecule forms micelle-like aggregates with PDP accumulated within the comb-block's pervaded volume based on analysis of the apparent molecular weight, viscosity, and chain dynamics. Overall, this work sheds light on the long-standing question regarding the evolution of the constituents in the BCP-based supramolecule in solution and provides valuable guidance toward their solution-based processing and morphological control.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Engineering Escherichia coli for Urease-Driven Synthesis of Metal Oxide Nanomaterials

The development of functional nanomaterials with controlled morphologies is essential for advancements in medicine, electronics and computing, energy, catalysis, and environmental applications. However, conventional synthesis methods often demand high energy input and pose significant environmental challenges. Urease-based biomineralization presents an efficient, eco-friendly alternative for nanomaterial production under mild conditions. In this study, we engineered Escherichia coli ( E. coli ) to express a urease gene cluster from Sporosarcina pasteurii using CRAGE-Duet technology. The engineered strain successfully synthesized calcium carbonate and calcium phosphate crystals. Expanding the approach, we synthesized metal oxide nanoparticles, including hematite (Fe 2 O 3 ), and nanocrystalline anatase titanium dioxide (TiO 2 ). These nanomaterials were characterized by electron microscopy, demonstrating the potential of E. coli as a sustainable and versatile platform for green nanomaterial synthesis.

bacteria↗
DOE OSTI2025

Band Gap Engineering and Metastable Phase Discovery in Cu 2 BaSnS 4– x Se x Nanocrystals via Topotactic Anion Exchange

Earth-abundant multinary inorganic chalcogenides, such as Cu 2 BaSnS 4–x Se x (CBTSSe), have emerged as promising absorbers for next-generation solar cells. However, accessing colloidal CBTSSe nanocrystals, including metastable polymorphs with more favorable optoelectronic properties, remains a critical synthetic challenge. Herein, we report the first use of topotactic anion exchange to access metastable crystal structures in soft chemistry syntheses. By varying the stoichiometry of selenium precursors, we directly synthesize Cu 2 BaSnS 4–x Se x (0 ≤ x ≤ 4) nanocrystals with a broad band gap tunability of 1.51–2.04 eV. At x = 4, a new metastable trigonal phase of Cu 2 BaSnSe 4 is isolated. This phase arises via an in-situ topotactic anion exchange from sulfur-rich Cu 2 BaSnS 4–x Se x intermediates, while retaining both the cation sublattice and overall nanocrystal morphology. The trigonal Cu 2 BaSnSe 4 exhibits a nearly direct band gap that is 280 meV lower than its thermodynamically stable orthorhombic counterpart, aligning more closely with the optimal band gap for single-junction solar cells. In contrast, a post-synthetic anion exchange route leads to the thermodynamically preferred orthorhombic polymorph, pointing to the critical nature of the in-situ transformation. Our findings open a versatile pathway for both polymorphic and morphological control in colloidal nanocrystals, expanding the synthetic design space for new optoelectronic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

High-Rate, Selective Electrosynthesis of Cyclohexanone Oxime via In Situ Generation and Release of Hydroxylamine on Bismuth

Oxime compounds are key industrial intermediates for nylon precursors and commodity chemicals. However, conventional routes rely on multistep reactions and hydroxylamine (NH 2 OH) salts, raising significant safety and sustainability concerns. Although electrosynthesis offers an alternative, oxime formation on d-block transition metals suffers from poor selectivity, as nitrogen oxyanion intermediates bind strongly to the surface and are readily over-reduced to ammonia. Here, we report morphology-controlled p-block bismuth rhombic dodecahedra (Bi RDs) that promote in situ NH 2 OH generation and its desorption into the electrolyte, enabling an electrochemical-chemical decoupled route for cyclohexanone oxime (CHO) synthesis. Bi RDs deliver nearly 100% Faradaic efficiency (FE) at −0.5 V vs. RHE and a yield of 1.4 mmol h –1 cm –2 at −0.9 V vs. RHE in an H-cell, while maintaining a CHO selectivity of nearly 100% at 100 mA cm –2 in a flow cell. Under identical conditions, d-block electrodes (Cu, Pd, Ag) show FE below 30%. Density functional theory calculations reveal that Bi 6p orbital-derived surface states weaken intermediate binding and facilitate NH 2 OH desorption, suppressing over-reduction. Kinetic analysis, post-addition trapping experiments, and in situ ATR-FTIR and Raman spectroscopy suggest the following reaction mechanism: NH 2 OH is selectively generated at the electrode surface, released as a freely diffusing intermediate, and undergoes homogeneous condensation with cyclohexanone in the bulk electrolyte, bypassing the surface-confined Langmuir–Hinshelwood pathway. These findings demonstrate that regulating intermediate desorption through p-block orbital chemistry provides a general strategy for achieving high selectivity in electro-organic nitrogen synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Polymer Inhibitors Enable >900 cm2 Dynamic Windows Based on Reversible Metal Electrodeposition with High Solar Modulation

Dynamic windows with adjustable tint give users control over the flow of light and heat to decrease the carbon footprint of buildings and improve the occupants’ comfort. Despite the benefits of dynamic windows, they are rarely deployed in buildings because the existing technology cannot achieve fast and colour-neutral tinting at an agreeable cost. Reversible metal electrodeposition is a promising approach to solve these problems. Here, we demonstrate the use of polymer inhibitors to reversibly deposit metal films with controlled morphology in dynamic windows. The windows that employ the polymer inhibitor can readily tint to below 0.001% visible transmittance in less than 3 min and exhibit high infrared reflectance (>70%), colour-neutral transmittance (C*<5) and an ultrawide range of optical and solar modulation (..delta..Tvis=0.76 and ..delta..SHGC=0.56). The polymer inhibitors also increase the efficiency and improve the durability of the windows and enable construction of >900 cm2 dynamic windows with fast response and excellent uniformity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Water mediated growth of oriented single crystalline SrCO3 nanorod arrays on strontium compounds

Abstract Morphology-controlled strontianite nanostructures have attracted interest in various fields, such as electrocatalyst and photocatalysts. Basic additives in aqueous strontium solutions is commonly used in controlling strontianite nanostructures. Here, we show that trace water also serves an important role in forming and structuring vertically oriented strontianite nanorod arrays on strontium compounds. Using in situ Raman spectroscopy, we monitored the structural evolution from hydrated strontium to strontianite nanorods, demonstrating the epitaxial growth by vapor–liquid–solid mechanism. Water molecules cause not only the exsolution of Sr liquid droplets on the surface but also the uptake of airborne CO 2 followed by its ionization to CO 3 2− . The existence of intermediate SrHO + –OCO 2 2− phase indicates the interaction of CO 3 2− with SrOH + in Sr(OH) x (H 2 O) y cluster to orient strontianite crystals. X-ray diffraction simulation and transmission electron microscopy identify the preferred-orientation plane of the 1D nanostructures as the (002) plane, i.e., the growth along the c-axis. The anisotropic growth habit is found to be affected by the kinetics of carbonation. This study paves the way for designing and developing 1D architecture of alkaline earth metal carbonates by a simple method without external additives at room temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Reactor engineering for converting CO 2 to solid carbon

Converting CO 2 into solid carbon materials provides both long-term carbon sequestration and the production of value-added products. Here, this Comment compares reactor configurations guided by thermodynamic analysis, evaluates the market volume and morphology control of different carbon products, and identifies hurdles and opportunities for scaled-up deployment.

58 GEOSCIENCES↗
DOE OSTI2023

Strategies to improve the mechanical robustness of metal halide perovskite solar cells

We report on the mechanical properties of high-efficiency perovskite solar cells (PSCs) with different chemical components by measuring the fracture energy (G c ) of films and devices. With the help of both macroscopic and microscopic techniques, we identify the locations where fracture takes place in the devices (either adhesive or cohesive failure) with various material and device structures. We propose strategies that can improve the fracture energy of PSCs based on the measured G c : the use of ozone-nucleated atomic layer deposition to improve charge transport layer robustness and the use of 2D perovskites and morphology control to improve the perovskite robustness. Our findings offer a pathway to rationally study the mechanical properties of PSCs and enable such cells to be more mechanically robust to reach commercial viability.

14 SOLAR ENERGY↗
DOE OSTI2025

Alternate InP synthesis with aminophosphines: solution–liquid–solid nanowire growth

Indium phosphide nanowires are important components in high-speed electronics and optoelectronics, including photodetectors and photovoltaics. However, most syntheses either use high-temperature and costly vapor-phase methodology or highly toxic and pyrophoric tris(trimethylsilyl)phosphine. To expand on the success of the aminophosphine-based InP colloidal quantum dot synthesis, we developed a synthesis for thin (~11 nm) zinc blende InP nanowires at 180 °C using indium tris(trifluoroacetate) and tris(diethylamino)phosphine. A flat nanoribbon morphology was identified by transmission electron and atomic force microscopy analysis, with the stoichiometric (110) lattice plane exposed. Nanowire growth proceeded through a solution–liquid–solid mechanism from in situ-formed indium metal nanoparticles. Molecular byproducts of tris(oleylamino)phosphine oxide and N-oleyltrifluoroacetamide observed by 31 P and 19 F NMR spectroscopy inform a proposed mechanism of indium reduction by the aminophosphine. Morphological control over the nanowire product was achieved by varying the phosphorus injection to control the aspect ratio, the In : P ratio to toggle between nanowires and multipods, and the pre-hot injection evacuation step to favor a quantum dot product. Furthermore, replacing the indium precursor with indium tris(trifluoromethanesulfonate) was found to make bulk zinc blende InP nanowires with an average diameter of >250 nm and tens of microns in length.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Circumventing thermodynamic limitations in converting carbon dioxide into carbon nanotubes via tandem catalysis

Carbon nanotubes (CNTs) are important materials for electronics and structural composites, but their production still relies on hydrocarbon-based chemical vapor deposition, an energy-intensive and fossil-dependent process, limited by rapid catalyst deactivation. Using CO2 as a carbon feedstock offers a sustainable route for CNT synthesis, yet direct CO2 conversion to CNTs is thermodynamically unfavorable and existing CO2-to-carbon pathways mainly yield amorphous or weakly graphitized solids. Here, we demonstrate a tandem electrochemical–thermochemical (EC-TC) strategy that overcomes these limitations. CO2 is first electrochemically reduced to a tunable mixture of C2H4 and CO, which is directly fed into a thermochemical reactor and converted into CNTs with controllable morphology and high CNT-to-metal mass ratios (~200) over NiFe catalysts at 750 °C. In situ synchrotron-based characterization and density functional theory calculations reveal that CO dissociation and C2H4 decomposition on NiFe alloys cooperatively promote CNT nucleation and sustained growth. This EC-TC strategy establishes a modular route for converting CO2 into value-added carbon nanomaterials.

03 NATURAL GAS↗
DOE OSTI2026

Adapting Nuclear Forensics from Light Water to Molten Salt Reactors: A Survey of Emerging Needs

Rising interest in molten salt reactors for commercial power production presents an opportunity to evaluate the techniques used to characterize materials of nuclear forensic interest. Since extensive research has been performed to identify and develop signatures of light water reactor (LWR) materials (e.g. uranium ore concentrates and uranium dioxide fuel pellets), we use this as a basis to explore possibilities for molten salt signature development. Through this comparative method, nuclear forensic signatures used today to identify the provenance of nuclear materials found out of regulatory control are adapted to molten salt reactor (MSR) fuel cycle materials. Radiological, elemental composition, isotopic composition, and model age signatures will likely not need large adaptations before being applied to MSR materials but may need to expand to be applicable to both thorium- and uranium-fueled systems. The liquid nature of molten salt fuel may erase signatures related to production and irradiation history that are informative for typical LWR materials. However, it may also lead to opportunities for new signatures, such as cooling rate–controlled morphology. Targets identified for further research include radiological attributes of fuel salts; elemental, chemical, and isotopic analysis of salts with differing production routes; morphological effects of various thermodynamic environments; and relevant fuel cycle radiochronometers. Additionally, the comparative nature of the proposed signatures implies a need for MSR-relevant databases and the production of salt standard reference materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Investigation of the photoluminescent properties, scintillation behaviour and toxicological profile of various magnesium tungstate nanoscale motifs

We have synthesized several morphologies and crystal structures of MgWO 4 using a one-pot hydrothermal method, producing not only monoclinic stars and large nanoparticles but also triclinic wool balls and sub-10 nm nanoparticles. Herein we describe the importance of reaction parameters in demonstrating morphology control of as-prepared MgWO 4 . Moreover, we correlate structure and composition with the resulting photoluminescence and radioluminescence properties. Specifically, triclinic-phase samples yielded a photoluminescence emission of 421 nm, whereas monoclinic-phase materials gave rise to an emission maximum of 515 nm. The corresponding radioluminescence data were characterized by a broad emission peak, located at 500 nm for all samples. Annealing the wool balls and sub-10 nm particles to transform the crystal structure from a triclinic to a monoclinic phase yielded a radioluminescence (RL) emission signal that was two orders of magnitude greater than that of their unannealed counterparts. Finally, to confirm the practical utility of these materials for biomedical applications, a series of sub-10 nm particles, including as-prepared and annealed samples, were functionalized with biocompatible PEG molecules, and subsequently were found to be readily taken up by various cell lines as well as primary cultured hippocampal neurons with low levels of toxicity, thereby highlighting for the first time the potential of this particular class of metal oxides as viable and readily generated platforms for a range of biomedical applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗