Search NASA⌕ Search

SEARCH · Search NASA

Results for “NASA DEVELOP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Aboveground Biomass Estimation Using NISAR Simulated ALOS-2 Time Series Data

Aboveground biomass (AGB) is a critical parameter to better understand the global carbon cycle and to develop sustainable forest management. However, a large uncertainty prevails. L-band SAR data have demonstrated strong potential to accurately retrieve AGB over low-biomass regions (<100 Mg ha-1). The upcoming NASA-ISRO Synthetic Aperture Radar mission will collect data at L- and S-band over earth’s landmass with a repeat period of 12 days, allowing us to have ample data for monitoring biomass and its dynamics. One of the key science requirements of the mission is to produce annual AGB maps at 1-ha resolution with RMS accuracy of 20 Mg/ha for 80 percentage of area over low-biomass regions in Calibration/Validation sites. The NISAR biomass algorithm will generate AGB maps based on the parameterization of semi-empirical model along with NISAR time-series dual pol data (HH and HV). To calibrate and validate the model for mission requirements, the mission will use reference estimates of AGB produced from ground inventory plots and airborne LiDAR data collected over selected sites distributed across different global ecoregions. This paper presents the initial results of the calibration/validation of the NISAR AGB retrieval algorithm over the Lenoir Landing (LENO), Alabama, USA site using NISAR simulated ALOS-2 time series data. Five multi-temporal dual-pol HH and HV NISAR Simulated ALOS 2 data collections were used as input to assess the performance of the model. The model AGB retrieval results shows that the NISAR model was able to achieve RMS accuracy within 20 Mg/ha.

Ramachandran, Naveen [Jet Propulsion Laboratory, C↗
DOE OSTI2025

High-resolution analysis of clay minerals and amorphous materials in martian analog environments

Mudrocks and mud-sized sediments (i.e., silt to clay) dominate the surface of Earth and Mars. These fine-grained sediments preserve a rich history of sedimentary processes from source to sink and shed light on ancient climates. However, both the physical and chemical nature of these materials make them difficult to fully characterize with traditional laboratory techniques. Here, we explore a cross-disciplinary and high-resolution approach using synchrotron radiation for X-ray diffraction, pair distribution function analysis, and submicrometer-scale X-ray fluorescence, combined with transmission electron microscopy, to better understand the nanostructure and composition of mud-sized sediments from a glacio-fluvial watershed in southwest Iceland. Our results demonstrate that sediments in the cold and wet climate of Iceland are more altered than previously thought, as evidenced by the identification of kaolinite and mixed-layer kaolinite-smectite. Additionally, sediments are enriched in amorphous materials and nanocrystalline phases, as determined from grain morphologies and compositions consistent with allophane, hisingerite, ferrihydrite, and halloysite. These alteration products are present as intimate mixtures that vary across depositional sites, demonstrating the dynamic nature of the secondary assemblage from source to sink. This work has implications for Mars, where, for example, basalt-sourced sedimentary rocks from Gale crater are abundant in clay minerals and amorphous materials. Finally, this work underpins the importance of using high-resolution techniques, a coordinated methodology, and developing innovative approaches for future planetary sample return missions (e.g., Mars sample return).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Hyperspectral remote sensing-based plant community map for region around NGEE-Arctic intensive research watersheds at Seward Peninsula, Alaska, 2017-2019

Using airborne hyperspectral remote sensing data from NASA Airborne Visible-Infrared Imaging Spectrometer- Next Generation (AVIRIS-NG) platforms in a region near NGEE-Arctic intensive watersheds at Seward peninsula of Alaska, high resolution (5m) maps of plant community distribution were developed and included in this data collected. AVIRIS-NG data collected over 2017-2019 period were used to develop deep neural networks, trained using vegetation plot observations collected at NGEE-Arctic watersheds at Kougarok, Council and Teller. A hierarchical vegetation classification scheme consisting of six classes at Level I, and 16 classes at Level II contained in two .txt files were used to developed the plant community maps for the region. Two geospatial raster data files (.tif) at both thematic levels are shared in this data collection. Data files in this collection use Alaska Albers Equal Area projection. Readme files available in three formats (*.html, *.md, *.pdf) and one *.png visualization map.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Design and Characterization of the Engineering Model of the Spectrometer Onboard LuSEE‐Night

Abstract The Lunar Surface Electromagnetics Explorer—Night, LuSEE‐Night, is a low‐frequency radio astronomy experiment that will explore the cosmic Dark Ages signal on the radio‐quiet farside of the Moon. The LuSEE‐Night carries a radio frequency spectrometer consisting of a set of antennas, analog and digital processing electronics, and will be launched by NASA's Commercial Lunar Payload Services in 2025. The spectrometer is designed to observe the spectrum of the radio sky in the 0.5−50 MHz band. The engineering model (EM) of the four‐channel spectrometer has been developed. The EM has been characterized for linearity, gain, noise, and their temperature dependence, confirming that the EM meets all the requirements for LuSEE‐Night. Three mitigation techniques have been implemented and verified to suppress self‐induced electromagnetic interference. The flight model of the spectrometer is currently being developed and is scheduled to be shipped to the integration site in early 2024.

Tamura, Emi↗
DOE OSTI2026

ARM Radiosondes for SNPP/JPSS Validation Field Campaign Report

This field campaign extension has been a coordinated effort involving the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility, the University of Wisconsin at Madison, and the Joint Polar Satellite System (JPSS) project to validate NOAA Unique Combined Atmospheric Processing System (NUCAPS) temperature and moisture sounding products from the Cross-track Infrared Sounder (CrIS) and the Advanced Technology Microwave Sounder (ATMS) instruments on board the NOAA-20 and NOAA-21 satellite platforms. In this arrangement, funding for radiosondes and balloons was provided by the JPSS project to ARM. These radiosondes were launched coincident with NOAA-20 and NOAA-21 satellite overpasses at the ARM field sites at Eastern North Atlantic (ENA), North Slope Alaska (NSA), and Southern Great Plains (SGP). Combined with other ARM data, an assessment of the radiosonde data quality was performed and post-processing corrections applied. The dedicated radiosondes were integrated into the NOAA Products Validation System (NPROVS+), which collocated the radiosondes with satellite products (NOAA, National Aeronautics and Space Administration [NASA], European Organisation for the Exploitation of Meteorological Satellites [EUMETSAT], Geostationary Operational Environmental Satellite [GOES], Constellation Observing System for Meteorology, Ionosphere, and Climate [COSMIC]) and numerical weather prediction (NWP) forecasts for use in product assessment and algorithm development. This work is a part of the NOAA-20 and NOAA-21 satellite retrieval validation efforts and provides critical accuracy assessments of the temperature and water vapor soundings.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Background Measurements and Simulations of the ComPair Balloon Flight

ComPair, a prototype of the All-sky Medium Energy Gamma-ray Observatory (AMEGO), completed a short-duration high-altitude balloon campaign on 27 August 2023 from Fort Sumner, New Mexico, USA. The goal of the balloon flight was to demonstrate ComPair as both a Compton and Pair telescope in flight, reject the charged particle background, and measure the background γ-ray spectrum. This analysis compares measurements from the balloon flight with Monte Carlo simulations to benchmark the instrument. The comparison finds good agreement between the measurements and simulations and supports the conclusion that ComPair accomplished its goals for the balloon campaign. Additionally, two charged particle background rejection schemes are discussed: a soft ACD veto that records a higher charged particle event rate but with less risk of event loss, and a hard ACD veto that limits the charged particle event rate on board. There was little difference in the measured spectra from the soft and hard ACD veto schemes, indicating that the hard ACD veto could be used for future flights. The successes of ComPair’s engineering flight will inform the development of the next generation of ComPair with upgraded detector technology and larger active area.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Next-Gen RTG Peltier Cooling Testing [Poster]

The Peltier Cooling Test was developed and performed on a General Purpose Heat Source Radioisotope Thermoelectric Generator (GPHS-RTG) for the first time to support the refurbishment and recertification of a legacy flight unit. The GPHS-RTG flight units generate power for NASA space missions by converting heat from decaying Plutonium-238 into electricity using 572 thermocouples. The Peltier test successfully verified the electrical connections of the thermocouples by visually observing their thermal behavior under an applied current. Knowledge of the thermocouple electrical connections will be critical as the refurbishment and recertification plan moves forward.

42 ENGINEERING↗
DOE OSTI2025

Inferring three-nucleon couplings from multi-messenger neutron-star observations

Understanding the interactions between nucleons in dense matter is an important challenge in theoretical physics. Effective field theories have emerged as the dominant approach to address this problem at low energies, with many successful applications to the structure of nuclei and the properties of dense nucleonic matter. However, how far into the interior of neutron stars these interactions can describe dense matter is an open question. Here, we develop a framework that enables the inference of three-nucleon couplings in dense matter directly from astrophysical neutron star observations. We apply this formalism to the LIGO/Virgo gravitational-wave event GW170817 and the X-ray measurements from NASA’s Neutron Star Interior Composition Explorer and establish direct constraints for the couplings that govern three-nucleon interactions in chiral effective field theory. Furthermore, we demonstrate how next-generation observations of a population of neutron star mergers can offer stringent constraints on three-nucleon couplings, potentially at a level comparable to those from laboratory data. Our work directly connects the microscopic couplings in quantum field theories to macroscopic observations of neutron stars, providing a way to test the consistency between low-energy couplings inferred from terrestrial and astrophysical data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

A globally sampled high-resolution hand-labeled validation dataset for evaluating surface water extent maps

Effective monitoring of global water resources is increasingly critical due to climate change and population growth. Advancements in remote sensing technology, specifically in spatial, spectral, and temporal resolutions, are revolutionizing water resource monitoring, leading to more frequent and high-quality surface water extent maps using various techniques such as traditional image processing and machine learning algorithms. However, satellite imagery datasets contain trade-offs that result in inconsistencies in performance, such as disparities in measurement principles between optical (e.g., Sentinel-2) and radar (e.g., Sentinel-1) sensors and differences in spatial and spectral resolutions among optical sensors. Therefore, developing accurate and robust surface water mapping solutions requires independent validations from multiple datasets to identify potential biases within the imagery and algorithms. However, high-quality validation datasets are expensive to build, and few contain information on water resources. For this purpose, we introduce a globally sampled, high-spatial-resolution dataset labeled using 3 m PlanetScope imagery. Our surface water extent dataset comprises 100 images, each with a size of 1024×1024 pixels, which were sampled using a stratified random sampling strategy covering all 14 biomes. We highlighted urban and rural regions, lakes, and rivers, including braided rivers and coastal regions. We evaluated two surface water extent mapping methods using our dataset – Dynamic World, based on Sentinel-2, and the NASA IMPACT model, based on Sentinel-1. Dynamic World achieved a mean intersection over union (IoU) of 72.16 % and F1 score of 79.70 %, while the NASA IMPACT model had a mean IoU of 57.61 % and F1 score of 65.79 %. Performance varied substantially across biomes, highlighting the importance of evaluating models on diverse landscapes to assess their generalizability and robustness. Our dataset can be used to analyze satellite products and methods, providing insights into their advantages and drawbacks. Our dataset offers a unique tool for analyzing satellite products, aiding the development of more accurate and robust surface water monitoring solutions. The dataset can be accessed via https://doi.org/10.25739/03nt-4f29.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Multi‐Model Ensembles in Ecosystem Modeling: Challenges and Best Practices for Decision‐Making

Ecosystem models are increasingly central to the decision-making for environmental policy, conservation planning, and climate-related investments. Yet, the growing reliance on Multi-Model Ensembles (MMEs) of ecosystem models by practitioners and policymakers, sometimes under tight timelines and imperfect information, has frequently outpaced the scientific rigor required to ensure ensemble reliability. Here, MMEs refer to approaches that combine targeted predictions from multiple models with the expectation of improving robustness and quantifying predictive uncertainty. Poorly designed MMEs may create a false sense of confidence and lead to suboptimal policy and market decisions. This perspective argues that robust decision-making-relevant MMEs must be grounded on two pillars: (1) rigorous Model Intercomparison Projects (MIPs), which identify inter-model agreement and disagreement, characterize model uncertainties, and evaluate robustness with observationally based benchmarks—MIPs' diagnostic evaluation is so critical that it must be needed to drive MME's decision in model selection and weighting, especially when only a limited number of models available; and (2) co-design by both stakeholders and scientists to ensure that scenarios, metrics and uncertainty requirements provide decision-relevant information. Building upon the past success and lessons from the existing MIPs-MMEs efforts (e.g., climate/Earth system/crop), we derived the theoretical basis for MMEs, addressed their specific challenges in ecosystem modeling, and highlighted proper consideration of model numbers and diversity, risk of model inter-dependence, effective calibration of model parameters, possible overdue of some ecosystem model development, critical roles of open benchmark data across a wide range of conditions, and suggested use of Artificial Intelligence to support MIPs-MMEs. We highlighted the under-recognized opportunity for MIPs and MMEs to drive scientific progress and innovation through identifying better performing models, systematic benchmarking, feedback loops, and targeted model improvement. By following actionable best practice guidelines, MMEs can evolve from ad hoc aggregation of models into a trusted backbone of environmental policy and decision-making.

ecosystem modeling↗
DOE OSTI2021

Radiological Consequence Evaluation for Dragonfly Mission

The scoping calculations presented in this report were developed to provide a conservative estimate of radiological dose consequences associated with launch accidents involving one multi-mission radioisotope thermoelectric generator (MMRTG) and possibly up to 43 light-weight radioisotope heater units (LWRHUs) for the upcoming National Aeronautics and Space Administration (NASA) Dragonfly mission. This report summarizes dose consequence analysis from SAND2019-11148, “Nuclear Risk Assessment 2019 Update for the Mars 2020 Mission Environmental Impact Statement,” referred to in this document as the Mars 2020 nuclear risk analysis (NRA) and compares those results to a parametric analysis used to analyze potential dose consequences for the Dragonfly mission.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

X-ray Multilayers for Next-Generation Astrophysics Missions

In this work, we proposed to demonstrate the feasibility of high-reflectivity multilayer coatings that will enable next-generation astrophysics missions in the x-ray region (2 – 7 nm wavelengths) where currently high-performance coatings largely do not exist. This paucity is due to multilayer interfacial effects that severely reduce the coating reflectance; our approach was based on understanding these interfacial effects and on tailored process modifications to control and minimize them. The experimental validation of our approach was made difficult by our multilayer deposition tool being down for a large portion of the project. The required repairs used significant amount of funding and time, which forced to reduce the scope of the project. Our experimental study focused on Cr/C multilayers and their optimization using N2 reactive sputtering. We showed that the highest reflectance was achieved when depositing the multilayers with 35% N2, and with a larger Cr thickness ratio than what was initially predicted by simulations. This result consists of a 13% relative increase in reflectivity compared to our previous work. It will benefit upcoming NASA proposals and LLNL’s leadership in this area, as well as topics highly relevant to LLNL/DOE’s priority areas, such as x-ray laser science and semiconductor manufacturing. This work will be further investigated as part of a Laboratory Directed Research and Development (LDRD) Exploratory Research (ER) project starting in Fiscal Year (FY) 2024.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Multi-Scale Integrated Monitoring System for Enhancing Methane Emission Detection, Quantification & Prediction

This report details the progress and findings of a comprehensive study on reviewing existing solutions, identifying technology gaps, and formulating an “all-in-one” integrated strategy for developing the next-generation multiscale methane monitoring and modeling platform, conducted under grant number DE-FE0032292. Co-led by Dr. David Ebert, Dr. Binbin Weng, and Dr. Chenghao Wang at the University of Oklahoma, the project’s goal was to develop an integrated approach for building this engineering platform to detect, quantify, and mitigate methane emissions across various temporal scale, spatial scales, and sectors. The planning grant study began with an extensive review of various methane sensing and monitoring technologies and systems, surveying over 100 technology providers globally. This review revealed the prevalence of optical methods over chemical methods in commercially available sensors, with Non-Dispersive Infrared (NDIR), Tunable Diode Laser Absorption Spectroscopy (TDLAS), and Optical Gas Imaging (OGI) cameras being the most prevalent options. A trend towards more advanced optical techniques was observed, driven by increased regulatory focus and technological advancements. The technical evaluation of these sensing technologies provided crucial insights into their capabilities and limitations. The study examined emerging technologies such as Differential Absorption LiDAR (DIAL), which show promise for high-precision and long-range detection. The team then investigated the features and application bandwidth of various sensing platforms, including handheld, fixed/stationary, mobile, aerials, and spaceborne monitors. Pilot field studies were conducted to assess the capabilities of solutions for different emission scenarios. Field work with sensor deployments was conducted at three distinct site types: an oil & gas industry site, a cattle ranching operation, and a waste processing facility. The team also conducted a thorough review of methane flux inverse modeling approaches, focused on physically based methods. These approaches were categorized into simple, intermediate, and advanced methods. A realtime WRF-GHG (Weather Research and Forecasting-Greenhouse Gas) modeling system was developed and applied, incorporating multiple data sources to guide field experiments and inform methane plume detection. The project identified and analyzed numerous categories of methane data sources, including satellite measurements, ground-based sensors, and inventory databases. Key platforms examined include EDGAR, EPA GHGI, NASA TROPOMI, Carbon Mapper, and Climate TRACE, among others. The team proposed an architecture for a comprehensive methane monitoring platform. This system incorporates multi-source data acquisition, advanced data processing and assimilation, interactive visualization tools, and analytical capabilities for emissions forecasting and scenario analysis. The proposed platform aims to provide a user-friendly interface catering to various stakeholders, from researchers to policymakers. The architecture includes sophisticated data ingestion methods, a centralized data warehouse, and advanced analytical tools for data fusion and interpretation. To ensure the relevance and effectiveness of the proposed system, a comprehensive survey was conducted to gather stakeholder input on system requirements. Key findings include a strong need for integrating various data types and formats, a preference for real-time data updates and advanced visualization tools, and a demand for user-friendly interfaces catering to different expertise levels.

03 NATURAL GAS↗
DOE OSTI2021

Microcalorimeter measurement of x-ray spectra from a high-temperature magnetically confined plasma

A NASA-built x-ray microcalorimeter spectrometer has been installed on the MST facility at the Wisconsin Plasma Physics Laboratory and has recorded x-ray photons emitted by impurity ions of aluminum in a majority deuterium plasma. Much of the x-ray microcalorimeter development has been driven by the needs of astrophysics missions, where imaging arrays with few-eV spectral resolution are required. The goal of our project is to adapt these single-photon-counting microcalorimeters for magnetic fusion energy research and demonstrate the value of such measurements for fusion science. Microcalorimeter spectrometers combine the best characteristics of the x-ray instrumentation currently available on fusion devices: high spectral resolution similar to an x-ray crystal spectrometer and the broadband coverage of an x-ray pulse height analysis system. Fusion experiments are increasingly employing high-Z plasma-facing components and require measurement of the concentration of all impurity ion species in the plasma. This diagnostic has the capability to satisfy this need for multi-species impurity ion data and will also contribute to measurements of impurity ion temperature and flow velocity, Zeff, and electron density. Here, we introduce x-ray microcalorimeter detectors and discuss the diagnostic capability for magnetic fusion energy experiments. We describe our experimental setup and spectrometer operation approach at MST, and we present the results from an initial measurement campaign.

Eckart, M. E. (ORCID:0000000338945889)↗
DOE OSTI2022

Characterization and application of a high-resolution microfluidic device in atmospheric ice nucleation research and integrated science teaching

Ambient ice-nucleating particles (INPs) represent an important subset of aerosol particles that facilitate heterogeneous formation of ice crystals in the atmosphere, which can impact Earth system and energy. In this work, we developed an affordable high-resolution platform to replicate atmospheric immersion freezing through the unique capabilities of microfluidics to measure INP concentration of known ice nucleation active materials, as well as high-latitude soil samples. The new instrument produced comparable and extended freezing efficiency data for a multitude of samples over the temperature range of -5 to -35 °C as compared to an existing freezing assay within known uncertainties. Moreover, the new assay was integrated into science teaching at a primarily undergraduate and Hispanic-serving institute, contributing to fostering a deeper understanding of ice nucleation processes among college students, instilling their enthusiasm for science, and addressing the critical need for a well-informed citizenry. Student research assistants were involved in both research and pedagogical development processes. Three students from our team visited the Pacific Northwest National Laboratory to help characterize physicochemical properties of our test samples and to test modeling of atmospheric ice nucleation using a box model as well as a global climate model (E3SM) for the regional-scale conditions over the North Slope of Alaska (NSA) and Southern Great Plains (SGP). We also assessed student learning experience via hands-on training, research processes, and development of educational materials. On pre- and post-participation surveys and in exit interviews, students reported personal growth as advancements in breadth of experience, research-related skill sets, and regarding their educational and career goals. They also affirmed that the methods enacted incorporated the NASA Minority University Research and Education Program (MUREP) STEM Engagement Best Practices.

58 GEOSCIENCES↗
DOE OSTI2025

Impact of Urbanization on Convection, Lightning, and Precipitation Over the Houston Metropolitan Area: Case Study Simulation From the TRACER Campaign

This study investigates the effects of urbanization, specifically land use change and anthropogenic emissions (AE), on convection, lightning, and surface precipitation for a case of summertime sea‐breeze convection observed over the Houston metropolitan area. The unique capabilities of the NASA‐Unified Weather Research and Forecasting model allows us to conduct a series of sensitivity experiments with complex configurations, in particular including multi‐year land model spin‐up simulations, treatment of aerosols and their precursors, and explicit cloud charging and lightning. The simulation results show that urban land use primarily alters the temporal evolution of convection, lightning, and surface precipitation, leading to late afternoon thunderstorm development. The decrease in latent heat flux from the land surface caused by urbanization weakens convection in the early afternoon, while a condition suitable for convection development is maintained in the late afternoon due to less stabilization of the lower troposphere by the weaker convection development and high sensible heat flux from the surface. On the other hand, anthropogenic aerosols directly enhance convection, lightning, and surface precipitation by increasing convective updrafts due to the aerosol‐induced convective invigoration. The combined effects of urban land use and AE lead to even stronger thunderstorms in the late afternoon, mostly consistent with observations. These results indicate that urbanization increases the probability of late afternoon thunderstorms over the Houston area during the summer season. Advanced weather forecasting models that incorporate these urbanization effects might support sustainable urban planning to better mitigate the impacts of urbanization on local weather and public safety.

Iguchi, T. [Univ. of Maryland, College Park, MD (U↗
DOE OSTI2023

Modification of CO 2 /H 2 O selectivity of polymer for carbon capture materials

Today, the atmospheric carbon dioxide (CO 2 ) concentration is 421ppm, over one hundred ppm higher than it was at any point in the last 800,000 years (NASA, 2023). Multiple strategies are necessary to reduce the presence of carbon dioxide in the atmosphere. Besides limiting CO 2 output, carbon capture technology is essential to reduce the overall amount of CO 2 . The Microencapsulated CO 2 Sorbents (MECS) team at Lawrence Livermore National laboratory has developed technologies that can capture CO 2 inside microcapsules, where it can be temporarily stored and later released. In 2017, the commercial potential of these microcapsules was recognized. The brewing industry only requires about one third of the CO 2 it releases for carbonization and packaging, which Congwang Ye and Lionel Keene learned when they met with leaders of small breweries in Colorado to discuss employing carbon capture microcapsules in their processes to reduce their carbon footprint and production costs (Thomas, 2017). The breweries were interested in the technology, but the existing microcapsules require hydration, which is an expensive process for small brewers. In order to develop the microcapsules so they can be commercialized, it is essential to reduce their water loss to improve efficiency and reduce costs for the customers. One method to resolve this issue is to alter the membrane formulation by adding a material that is known to be hydrophobic to decrease the water permeability of the entire membrane. The goal of this project was to study the effect of dispersing a nanomaterial in the polymer membrane shells of microcapsules on the water vapor and carbon dioxide permeability of the membranes.

36 MATERIALS SCIENCE↗