Search NASA⌕ Search

SEARCH · Search NASA

Results for “NUCLEATION PROCESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

A Study of Nucleate Boiling with Forced Convection in Microgravity

The ultimate objective of basic studies of flow boiling in microgravity is to improve the understanding of the processes involved, as manifested by the ability to predict its behavior. This is not yet the case for boiling heat transfer even in earth gravity, despite the considerable research activity over the past 30 years. The elements that constitute the nucleate boiling process - nucleation, growth, motion, and collapse of the vapor bubbles (if the bulk liquid is subcooled) - are common to both pool and flow boiling. It is well known that the imposition of bulk liquid motion affects the vapor bubble behavior relative to pool boiling, but does not appear to significantly influence the heat transfer. Indeed, it has been recommended in the past that empirical correlations or experimental data of pool boiling be used for design purposes with forced convection nucleate boiling. It is anticipated that such will most certainly not be possible for boiling in microgravity, based on observations made with pool boiling in microgravity. In earth gravity buoyancy will act to remove the vapor bubbles from the vicinity of the heater surface regardless of how much the imposed bulk velocity is reduced, depending, of course, on the geometry of the system. Vapor bubbles have been observed to dramatically increase in size in pool boiling in microgravity, and the heat flux at which dryout took place was reduced considerably below what is generally termed the critical heat flux (CHF) in earth gravity, depending on the bulk liquid subcooling. However, at heat flux levels below dryout, the nucleate pool boiling process was enhanced considerably over that in earth gravity, in spite of the large vapor bubbles formed in microgravity and perhaps as a consequence. These large vapor bubbles tended to remain in the vicinity of the heater surface, and the enhanced heat transfer appeared to be associated with the presence of what variously has been referred to as a liquid microlayer between the bubble and the heater surface. The enhancement of the boiling process with low velocities in earth gravity for those orientations producing the formation of a liquid macrolayer described above, accompanied by "sliding" vapor bubbles, has been demonstrated. The enhancement was presented as a function of orientation, subcooling, and heated length, while a criterion for the heat transfer for mixed natural/forced convection nucleate boiling was given previously. A major unknown in the prediction and application of flow boiling heat transfer in microgravity is the upper limit of the heat flux for the onset of dryout (or critical heat flux - CHF), for given conditions of fluid-heater surfaces, including geometry, system pressure and bulk liquid subcooling. It is clearly understood that the behavior in microgravity will be no different than on earth with sufficiently high flow velocities, and would require no space experimentation. However, the boundary at which this takes place is still an unknown. Previous results of CHF measurements were presented for low velocity flow boiling at various orientations in earth gravity as a function of flow velocity and bulk liquid subcooling, along with preliminary measurements of bubble residence times on a flat heater surface. This showed promise as a parameter to be used in modeling the CHF, both in earth gravity and in microgravity. The objective of the work here is to draw attention to and show results of current modeling efforts for the CHF, with low velocities in earth gravity at different orientations and subcoolings. Many geometrical possibilities for a heater surface exist in flowing boiling, with boiling on the inner and outer surfaces of tubes perhaps being the most common. If the vapor bubble residence time on and departure size from the heater surface bear a relationship to the CHF, as results to be given indicate, it is important that visualization of and access to vapor bubble growth be conveniently available for research purposes. In addition, it is desirable to reduce the number of variables as much as possible in a fundamental study. These considerations dictated the use of a flat heater surface, which is rectangular in shape, 1.91 cm by 3.81 cm (0.75 x 1.5 inches), consisting either of a 400 Angstrom thick semi-transparent gold film sputtered on a quartz substrate which serves simultaneously as a heater and a resistance thermometer, or a copper substrate of the same size. The heater substrate is a disc which can be rotated so that the heated length in the flow direction can be changed from 1.91 to 3.81 cm (0.75 to 1.5 inches). The fluid is R-113, and the velocities can be varied between 0.5 cm/s and 60 cm/s. For a sufficiently low velocity the CHF can be modeled reasonably well at various orientations by the correlation for pool boiling corrected for the influence of bulk liquid subcooling, multiplied by the square root of q, the angle relative to horizontal. This arises from equating buoyancy and drag forces in the inverted positions where the vapor bubbles are held against the heater surface as they slide. A distortion of the measurements relative to pool boiling occurs as the flow velocity increases. In modeling this effect at different levels of subcooling it appeared appropriate to estimate the volumetric rate of vapor generation, using measurements of bubble frequency (or residence time), void fraction and average bubble boundary layer thickness. These were determined with the use of a platinum hot wire probe 0.025 mm in diameter by 1.3 mm long, applying a constant current to distinguish between contact with liquid or vapor. Two-dimensional spatial variations are obtained with a special mechanism to resolve displacements in increments of 0.025 mm. From such measurements it was determined that the fraction of the surface heat transfer resulting in evaporation varies inversely with the subcooling correction factor for the CHF. The measured inverse bubble residence time is normalized relative to that predicted for an infinite horizontal flat plate at the CHF, and is correlated well with the CHF normalized relative to that for pool boiling, for various orientation angles and subcooling levels. This correspondence is then combined with a normalizing factor for the energy flux leaving the heater surface at the CHF and the computed bubble radius at departure, determined from the balance between the outward velocity of the interface due to evaporation and the buoyance induced velocity of the center of mass of the bubble. The product of the CHF and the corresponding residence time was determined to be a constant for all orientations at a given bulk flow velocity and liquid subcooling, and must be determined empirically for each velocity and subcooling at present. It then becomes possible to predict the CHF for the different orientations, velocities, and subcoolings. These are compared with normalized measurements of the CHF for velocities ranging from 4 cm/s to 55 cm/s, subcoolings from 2.8 to 22.2 K, over orientations angles of 360 degrees.

Merte, Herman, Jr.↗
NASA NTRS1983

Analytic modeling of soot nucleation under fuel rich conditions

The objective of the present research is to construct a soot nucleation model according to a proposed chemical kinetic scheme to delineate quantitatively the nucleation mechanism in the soot formation process. Instead of following the traditional views which generally associate sooting with the homogeneous nucleation process in phase transformation or polymerization, we choose a chemical kinetic approach. In our proposed scheme the number of carbon atoms in the intermediate species between the fuel molecule and soot nuclei is continuously increased by radical additions. The number of hydrogen atoms in the intermediate species on the other hand is steadily decreased by radical dehydrogenation. When the number of carbon atoms in each of the intermediate molecules has exceeded a certain limit and the number of hydrogen atoms has fallen below a certain level, they may coagulate with one and another to form a larger molecule which is regarded as the initial soot nuclei in the present theory. Further coagulation and surface growth of the nuclei will lead to observable soot particles.

Yang, C. H.↗
NASA NTRS2000

Size Exclusion Chromatography Studies of the Initial Self-Association Steps of Chicken Egg White Lysozyme Nucleation

Nucleation is one of the least understood aspects of crystallogenesis. In the case of macromolecule nucleation, this understanding is further hampered by uncertainty over what precisely is being discussed. We define the process of solute self-association (aggregation, oligomerization, interaction, clustering, etc.) whereby n-mers (n > or = 2) having a crystallographic or nascent crystallographic arrangement leading to the critical nucleus reversibly form in the solution, to be part of the nucleation process. This reversible self-association process is a fundamental part of the nucleation process, and occurs as a function of the solute concentration. In the case of chicken egg white lysozyme, a considerable body of experimental evidence leads us to the conclusion that it also forms the crystal growth units. Size exclusion chromatography is a simple and direct method for determining the equilibrium constants for the self-association process. A Pharmacia FPLC system was used to provide accurate solution flow rates. The column, injection valve, and sample loop were all mounted within a temperature-controlled chamber. Chromatographically re-purified lysozyme was first dialyzed against the column equilibration buffer, with injection onto the column after several hours pre-incubation at the running temperature. Preliminary experiments, were carried out using a Toyopearl HW-50F column (1 x 50cm), equilibrated with 0.1 M sodium acetate, 5% sodium chloride, pH 4.6, at 15C. Protein concentrations from 0.1 to 4 mg/ml were employed (C(sub sat) = 1.2 mg/ml). The data from several different protein preparations consistently shows a progressively decreasing elution volume with increasing protein concentration, indicating that reversible self-association is occurring. The dotted line indicates the monomeric lysozyme elution volume. However, lysozyme interacts with the column matrix in these experiments, which complicates data analysis.Accordingly, we are testing silica-based HPLC columns in an effort to eliminate this problem and substantially reduce the column volume and experimental run time. The results and data analysis from these and subsequent experiments will be presented.

Ewing, Felecia↗
NASA NTRS2000

Laboratory Astrophysics: The Universe in the Palm of Your Hand

Polycyclic aromatic compounds (PACs), a class of organic molecules whose structures are characterized by the presence of two or more fused aromatic rings, have been the subject of astrophysical interest for nearly two decades. Large by interstellar standards (from as few as 20 to perhaps as many as several hundred atoms), it has been suggested that these species are among the most abundant interstellar molecules impacting a wide range of astrophysical phenomena including: (1) the ubiquitous family of infrared emission bands observed in an ever-increasing assortment of astronomical objects; (2) the subtle but rich array of discrete visible/near-infrared interstellar molecular absorption features known as the diffuse interstellar bands (DIBs); (3) the broad near-infrared quasi-continuum observed in a number of nebulae known as excess red emission (ERE); (4) the interstellar ultraviolet extinction curve and broad '2200 Angstrom bump'; and (5) the heating/cooling mechanisms of interstellar clouds. Nevertheless, until recently a lack of good-quality laboratory spectroscopic data on PACs under astrophysically relevant conditions (i.e. isolated, ionized molecules, ionized molecular clusters, etc.) has hindered critical evaluation and extension of this model. Fortunately, the last decade has seen an explosion of experimental and theoretical techniques aimed specifically at addressing these issues. Indeed, many of these techniques will be explored in the series of talks which constitute this forum. This talk will provide an overview of the studies of the spectroscopic properties of isolated, neutral, and ionized PACs that have been conducted in the Astrochemistry Laboratory at NASA Ames, together with a consideration of their implications for astrophysics. Particular attention will be paid to models of the interstellar infrared emission spectra generated using the available database of laboratory PAC infrared spectra and the natural ability of this database to accommodate the variations observed in the astronomical spectra. Such models provide insight into the structure, abundance, and ionization state of the interstellar PAC population and, in turn, provide direct insight into the processes of carbon nucleation, growth and evolution as matter is processed through the interstellar medium. These models will be followed by a more in depth look at some specific aspects of the interstellar infrared emission spectrum, considering both what we can learn about them and what we can learn from them. Finally, some of the limitations of the current model and the available spectroscopic dataset will be 'dered along with future experimental directions designed to address these shortcomings. Further information about this and the related areas of research currently ongoing in the Astrochemistry Laboratory can be found at our world wide web site. http://www-space.arc.nasa.gov/(tilda)astrochem

Hudgins, Douglas M.↗
NASA NTRS2004

Vibrational Spectroscopy at Cryogenic Temperatures: From the Laboratory to the Ends of the Universe

Polycyclic aromatic compounds (PAC) have been the subject of astrophysical interest for nearly two decades. Indeed, there is now evidence that these compounds are among the most abundant interstellar molecules, comprising perhaps 10 - 30% of all the carbon in our galaxy. Ranging in size from as few as 20 to as many as hundreds or thousands of carbon atoms, these molecules are enormous by interstellar standards and impact a wide range of astrophysical phenomena including: the near- and mid-infrared emission spectrum of a wide range of astronomical objects; the ultraviolet/visible/near-infrared absorption of the diffuse medium that permeates our galaxy; and the heating and cooling mechanisms of interstellar clouds. Nevertheless, until recently a lack of laboratory spectroscopic data on PAC under astrophysically relevant conditions (i.e. isolated, ionized molecules; ionized molecular clusters, etc.) has hindered critical evaluation and extension of this model. Fortunately, the last decade has seen an explosion of experimental and theoretical techniques aimed specifically at addressing these issues. Here, we begin with a brief review of the evidence for the existence and abundance of interstellar PAC. From there, we move on to an overview of the general spectroscopic characteristics of the range of isolated, neutral and ionized PAC that we have studied over the last decade. Finally, we will conclude with a consideration of the astrophysical implications and applications of interstellar PAC. Our discussion will revolve primarily around the observed interstellar infrared emission spectra and the ability of the laboratory spectra of varying combinations of PAC to accommodate both the global appearance and the region-to-region variability of this emission. Careful models based on sound laboratory spectroscopic data such as these now have the potential to provide insight into the structure, abundance, and ionization state of the interstellar PAC population. That, in turn, will provide direct insight into the processes of carbon nucleation, growth and evolution as matter is processed through the interstellar medium.

Hudgins, Douglas M.↗
NASA NTRS1999

Role of Dynamic Nucleation at Moving Boundaries in Phase and Microstructure Selection

Solidification microstructures that form under steady-state growth conditions (cells, dendrites, regular eutectics, etc.) are reasonably well understood in comparison to other, more complex microstructures, which form under intrinsically non-steady-state growth conditions due to the competition between the nucleation and growth of several phases. Some important practical examples in this latter class include microstructures forming in peritectic systems in highly undercooled droplets, and in strip cast stainless steels. Prediction of phase and microstructure selection in these systems has been traditionally based on (1) heterogeneous nucleation on a static interface, and (2) comparing the relative growth rate of different phase/microstructures under steady-state growth conditions. The formation of new phases, however, occurs via nucleation on, or ahead of, a moving boundary. In addition, the actual selection process is controlled by a complex interaction between the nucleation process and the growth competition between the nuclei and the pre-existing phase under non-steady-state conditions. As a result, it is often difficult to predict which microstructure will form and which phases will be selected under prescribed processing conditions. This research addresses this critical role of nucleation at moving boundaries in the selection of phases and solidification microstructures through quantitative experiments and numerical modeling in peritectic systems. In order to create a well characterized system in which to study this problem, we focus on the directional solidification of hypo- and hyper-peritectic alloys in the two-phase region, imposing a large enough ratio of temperature gradient/growth rate (G/V(sub p)) to suppress the morphological instability of both the parent (alpha) and peritectic (Beta) phases, i.e. each phase alone would grow as a planar front. Our combined experimental and theoretical results show that, already in this simplified case, the growth competition of these two phases leads to a rich variety of microstructures that depend sensitively upon the relative importance of nucleation, diffusion, and convection.

Karma, Alain↗
NASA NTRS1985

Computer simulation of thin film nucleation and growth

Some of the processes involved in thin film nucleation and growth were simulated by means of a digital computer. The main conclusions drawn from the simulation results are (1) Because of the random nature of the processes involved, a large variation in results is obtained. (2) Upon impingement, clusters are formed up to a coverage of ca. 0.2, and from there on growth of existing clusters, rather than formation of new ones, takes place. (3) Surface migration is responsible for the formation of most of the clusters at coverages smaller than 0.1, whereas at higher coverages most clusters are formed upon impingement. (4) Surface migration accelerates the growth and causes reduction in cluster density. (5) Reevaporation slows the growth and reduces the cluster density dramatically.

Salik, J.↗
NASA NTRS1991

Nucleation and crystallization of Na2O-2CaO-3SiO2 glass by differential thermal analysis

DTA is presently used to characterize the nucleation and crystallization processes of the Na2O-2CaO-3SiO2 glass. A nucleation rate-temperaturelike curve is obtained by plotting either the reciprocal of the temperature corresponding to the crystallization peak maximum, or the height of the crystallization peak, as a function of nucleation temperature. The nucleation-temperature range for this glass composition, 550-650 C, and the maximum nucleation temperature of 600 + or - 5 C, are found to be in excellent agreement with those associated with the classical nucleation technique, followed by isothermal crystallization. It is noted that when most of the nucleation occurs during the DTA measurements, a modified Kissinger equation must be used to calculate the crystallization energy.

Xu, Xiaojie J.↗
NASA NTRS1985

Interrelationships among the terrestrial planets

The spatial distribution of mass in the solar system provides invaluable clues pertaining to the condensation history of the solar nebula, to the sequence of condensation of minerals and metal alloys in different P-T Regimes in the nebula and to the time sequence in the nucleation of planetary iron cores. Massive planets (Earth & Venus) were due to the twin processes of early nucleation of iron into massive cores and late termination of accretion processes which resulted in the accretion of volatile rich materials also. This paper maintains that the accretionary features (High-lands, basins/craters) are present on all the planets and the thermally controlled tectonic styles (Rifts, fracture zones, volcanic plains, Canyons, trenches, domes, etc.) are essentially of same origin but are of different magnitude and the interactions of degassed volatiles (atmosphere together with hydrosphere) with the lithosphere are dictating and diversifying the tectonic style on the Earth.

Rao, A. S. P.↗
NASA NTRS1982

Stratospheric aerosols - Observation and theory

Important chemical and physical roles of aerosols are discussed, and properties of stratospheric aerosols as revealed by experimental data are described. In situ measurements obtained by mechanical collection and scattered-light detection yield the overall size distribution of the aerosols, and analyses of preserved aerosol precursor gases by wet chemical, cryogenic and spectroscopic techniques indicate the photochemical sources of particle mass. Aerosol chemical reactions including those of gaseous precursors, those in aqueous solution, and those on particle surfaces are discussed, in addition to aerosol microphysical processes such as nucleation, condensation/evaporation, coagulation and sedimentation. Models of aerosols incorporating such chemical and physical processes are presented, and simulations are shown to agree with measurements. Estimates are presented for the potential aerosol changes due to emission of particles and gases by aerospace operations and industrial consumption of fossil fuels, and it is demonstrated that although the climatic effects of existing levels of stratospheric aerosol pollution are negligible, potential increases in those levels might pose a future threat.

Turco, R. P.↗
NASA NTRS1992

Cosmic dust analogue material condensation in microgravity: The Stardust programme - First results and future activities

Initial results are presented from airborne experiments investigating the vapor phase condensation in microgravity, carried out in the framework of the Stardust international program. Special attention is given to the design and operation of the experimental equipment, which includes the furnace for producing vapors from different materials and the cloud chamber in which the vapor nucleation occurs. A two-part mathematical model was developed to describe the transport processes in the nucleation chamber. Results obtained from three experimental series were conducted with Mg and Zn aboard NASA's KC-135 reduced-gravity research aircraft showed that nucleation front (smoke cloud) was quite different in appearance in microgravity from that typically observed at 1-g condition. The Mg and Zn particles exhibited significant differences in shape; there was some evidence of coagulation.

Ferguson, F.↗
NASA NTRS2000

Cross-Linking Studies of Lysozyme Nucleation

Tetragonal chicken egg white crystals consist of 4(sub 3) helices running in alternating directions, the helix rows having a two fold symmetry with each other. The unit cell consists of one complete tetrameric turn from each of two adjacent helices (an octamer). PBC analysis indicates that the helix intermolecular bonds are the strongest in the crystal, therefore likely formed first. AFM analysis of the (110) surface shows only complete helices, no half steps or bisected helices being found, while AFM line scans to measure the growth step increments show that they are multiples of the 4(sub 3) helix tetramer dimensions. This supports our thesis that the growth units are in fact multiples of the four molecule 4(sub 3) helix unit, the "average" growth unit size for the (110) face being an octamer (two turns about the helix) and the (101) growth unit averaging about the size of a hexamer. In an effort to better understand the species involved in the crystal nucleation and growth process, we have initiated an experimental program to study the species formed in solution compared to what is found in the crystal through covalent cross-linking studies. These experiments use the heterobifunctional cross-linking agent aminoethyl-4-azidonitroanaline (AEANA). An aliphatic amine at one end is covalently attached to the protein by a carbodiimide-mediated reaction, and a photo reactive group at the other can be used to initiate crosslinking. Modifications to the parent structure can be used to alter the distance between the two reactive groups and thus the cross-linking agents "reach". In practice, the cross-linking agent is first coupled to the asp101 side chain through the amine group. Asp101 lies within the active site cleft, and previous work with fluorescent probes had shown that derivatives at this site still crystallize in the tetragonal space group. This was also found to be the case with the AEANA derivative, which gave red tetragonal crystals. The protein now has a reactive group that can be photoactivated at a specific point in the nucleation or crystal growth process to "capture" protein molecules bound within reach of the crosslinking agent. If those bound protein molecules have a defined geometric relationship with the capturing molecule, such as would be found in a crystal, then the photoreacted cross-linking site should be consistent. Random protein interactions, typical of an amorphous precipitate or interaction, would show a random cross-linking reaction. The results of these and other experiments will be presented.

Forsythe, Elizabeth↗
NASA NTRS2003

Effect of Viscosity on the Crystallization of Undercooled Liquids

There have been numerous studies of glasses indicating that low-gravity processing enhances glass formation. NASA PI s are investigating the effect of low-g processing on the nucleation and crystal growth rates. Dr. Ethridge is investigating a potential mechanism for glass crystallization involving shear thinning of liquids in 1-g. For shear thinning liquids, low-g (low convection) processing will enhance glass formation. The study of the viscosity of glass forming substances at low shear rates is important to understand these new crystallization mechanisms. The temperature dependence of the viscosity of undercooled liquids is also very important for NASA s containerless processing studies. In general, the viscosity of undercooled liquids is not known, yet knowledge of viscosity is required for crystallization calculations. Many researchers have used the Turnbull equation in error. Subsequent nucleation and crystallization calculations can be in error by many orders of magnitude. This demonstrates the requirement for better methods for interpolating and extrapolating the viscosity of undercooled liquids. This is also true for undercooled water. Since amorphous water ice is the predominant form of water in the universe, astrophysicists have modeled the crystallization of amorphous water ice with viscosity relations that may be in error by five orders-of-magnitude.

Source record↗
NASA NTRS2023

Dispersion and Aging of Volcanic Aerosols after the La Soufriere Eruption in April 2021

Volcanic aerosols change the atmospheric composition and thereby affect weather and climate. Aerosol dynamic processes such as nucleation, condensation, and coagulation modify the shape, size, and mass of aerosol particles, which influence their atmospheric lifetime and radiative properties. Nevertheless, most models omit these processes for ash particles. In this work, we explore the ash aerosol aging and sulfate production during the first 4 days following the 2021 La Soufrière (St. Vincent) eruption with the ICON-ART model (ICOsahedral Nonhydrostatic model with Aerosol and Reactive Trace gases). Online coupling of ICON-ART with a one-dimensional volcanic plume model calculates volcanic emission, which makes it possible to resolve the different eruption phases of the noncontinuous La Soufrière eruption. We compared our simulated aerosol distribution and composition with observations from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument, the Multiangle Imaging SpectroRadiometer (MISR) Research Aerosol (RA) Algorithm, and the Barbados Cloud Observatory (BCO). We show that online coupling is essential to adequately model the emissions and plume development close to the volcano. The modeled aerosol aging is in very good agreement with observations from MISR near the emission source and with CALIOP at larger distances. Furthermore, particle aging occurs faster in the troposphere than in the stratosphere due to the availability of water vapor and OH, but a layer of coated ash appears at the plume top due to faster oxidation of SO2 and lofting by aerosol-radiation interaction. This paper gives the first direct comparison of aerosol aging in volcanic eruption plumes between simulations and observations

volcanic aerosols↗
NASA NTRS1984

A study of nucleation and growth of thin films by means of computer simulation: General features

Some of the processes involved in the nucleation and growth of thin films were simulated by means of a digital computer. The simulation results were used to study the nucleation and growth kinetics resulting from the various processes. Kinetic results obtained for impingement, surface migration, impingement combined with surface migration, and with reevaporation are presented. A substantial fraction of the clusters may form directly upon impingement. Surface migration results in a decrease in cluster density, and reevaporation of atoms from the surface causes a further reduction in cluster density.

Salik, J.↗
NASA NTRS1992

Controlling nucleation in protein solutions

A simple one-step technique for controlling the nucleation stage in protein solutions without the use of a seed crystal was developed using a specially designed apparatus in which the nucleation and growth processes can be separated. The method can be applied only to species that have a temperature-dependent solubility. The effectiveness of this 'thermonucleating' device was demonstrated with the nucleation and growth of ice, Rochelle salt, and lysozyme.

Demattei, R. C.↗
NASA NTRS1998

The Growth of Protein Crystals Using McDUCK

Most of the current microgravity crystal growth hardware is optimized to produce crystals within the limited time available on orbit. This often results in the actual nucleation and growth process being rushed or the system not coming to equilibrium within the limited time available. Longer duration hardware exists, but one cannot readily pick out crystals grown early versus those which nucleated and grew more slowly. We have devised a long duration apparatus, the Multi-chamber Dialysis Unit for Crystallization Kinetics, or McDUCK. This apparatus-is a series of protein chambers, stacked upon a precipitant reservoir chamber. All chambers are separated by a dialysis membrane, which serves to pass small molecules while retaining the protein. The volume of the Precipitant chamber is equal to the sum of the volumes of the protein chamber. In operation, the appropriate chambers are filled with precipitant solution or protein solution, and the McDUCK is placed standing upright, with the precipitant chamber on the bottom. The precipitant diffuses upwards over time, with the time to reach equilibration a function of the diffusivity of the precipitant and the overall length of the diffusion pathway. Typical equilibration times are approximately 2-4 months, and one can readily separate rapid from slow nucleation and growth crystals. An advantage on Earth is that the vertical precipitant concentration gradient dominates that of the solute, thus dampening out solute density gradient driven convective flows. However, large Earth-grown crystals have so far tended to be more two dimensional. Preliminary X-ray diffraction analysis of lysozyme crystals grown in McDUCK have indicated that the best, and largest, come from the middle chambers, suggesting that there is an optimal growth rate. Further, the improvements in diffraction resolution have been better signal to noise ratios in the low resolution data, not an increase in resolution overall. Due to the persistently large crystals grown we are currently proposing McDUCK for the growth of macromolecule crystals for use in neutron diffraction studies.

Ewing, Felicia↗
NASA NTRS1994

Induced nucleation of carbon dust in red giant stars

This study quantitatively tests the proposed model of induced nucleation of carbonaceous grains in carbon-rich red giant stars. Induced nucleation is the process of grain growth initiated by the presence of reactive surfaces provided by seed particles. The numerical study was performed using a deailed chemical kinetic model of carbon deposition, grain coagulation, and homogeneous nucleation of polycyclic aromatic hydrocarbons (PAHs). The model uses a method of moments to keep track of developing grain population in the forming dust shell. We test the efficiency of grain formation for large ranges of dust shell parameters typical for carbon stars. Our model is capable of producing a range of optically thick and thin dust shells in carbon stars. Results are in accord with (IRAS) spectral classes of carbon stars. The resulting composite grains produced are consistent with those recently found in ancient meteorites. This model also provides a realistic explanation for high abundances of (PAHs) in the interstellar medium and some planetary nebulae.

Cadwell, Brian J.↗