Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nuclear structure models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Progress in Understanding Short-Range Structure in Nuclei: An Experimental Perspective

High-energy electron scattering is a clean, precise probe for measurements of hadronic and nuclear structure and plays a key role in understanding the role of high-momentum nucleons (and quarks) in nuclei. Jefferson Lab has dramatically expanded our knowledge of the high-momentum nucleons generated by short-range correlations, providing sufficient insight to model much of their impact on nuclear structure in neutron stars and in low- to medium-energy scattering observables, including neutrino oscillation measurements. These short-range correlations also seem related to the modification of the quark distributions in nuclei, and efforts to improve our understanding of the internal structure of these short-distance and high-momentum configurations in nuclei will provide important input on a wide range of high-energy observables.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

γ-ray measurements in fast-neutron-induced reactions on 203 Tl

Fast-neutron-induced reactions can be used to characterize reaction mechanisms, investigate nuclear structure, and impose constraints on nuclear models. Because of the difficulty in predicting such effects, experimental data are important to constrain models. Thallium isotopes located close to the doubly magic Pb 208 nucleus are important for comparison with shell-model calculations. Study the population of excited states in Tl 203 and lighter isotopes in such reactions. Our methods are as follows. γ -ray cross sections were measured. The data were taken by using the Germanium Array for Neutron-Induced Excitations spectrometer. The pulsed neutron source of the Los Alamos Neutron Science Center's Weapons Neutron Research facility provided neutrons in the energy range from 1 to 300 MeV. The time-of-flight technique was used to determine the incident neutron energies. Cross sections for emission of several γ rays in 20 reaction channels were determined. Candidates for the intruder 9 / 2 - state in Tl 203 , from the odd proton in the h 9 / 2 orbital, and the first 5 + states in Tl 202 , 204 , from admixture of configurations, were identified. The excitation energy of the candidate 9 / 2 - , π h 9 / 2 state is in good agreement with the theoretical prediction from a semi-empirical weak-coupling model and its half-life is in the range of tens of nanoseconds. The feeding of a previously known isomer in Tl 202 exhibits similarities with the feeding of other isomers in this mass region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Isospin symmetry breaking in the mirror pair 73 Sr- 73 Br

The recent experimental observation of isospin symmetry breaking (ISB) in the ground states of the T=3/2 mirror pair 73 Sr- 73 Br is theoretically studied using large-scale shell-model calculations. The large valence space and the successful PFSDG-U effective interaction used for the nuclear part of the problem capture possible structural changes and provide a robust basis to treat the ISB effects of both electromagnetic and nonelectromagnetic origin. The calculated shifts and mirror-energy differences are consistent with the inversion of the I π =1/2 - ,5/2 - states between 73 Sr- 73 Br and suggest that the role played by the Coulomb interaction is dominant. Finally, an isospin breaking contribution of nuclear origin is estimated to be ≈25keV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Numerical Simulation of Irradiation Induced Swelling for STAR 4.1 Blanket

Here, this article presents the preliminary results of FEM implementation of irradiation-induced swelling, hardening, and creep effect using ANSYS user programmable features (UPFs) applied to material properties. The first liquid metal breeding blanket model for STAR 4.1 tokamak as a part of the virtual prototyping system is under development at Princeton Plasma Physics Laboratory (PPPL). Intense neutron irradiation produces significant changes in the physical and mechanical properties of Fe-(8%–9%)Cr-based reduced activation ferritic martensitic (RAFM) steels. An ANSYS model of the breeding blanket was built to involve these irradiation-induced material property changes with neutron fluence distribution mapped from the MCNP model. Simulation results show that significant structure deformation forms from nuclear swelling, stress, and plastic strain arising from DPA gradient through wall thickness. The material degradation effect is not negligible. This modeling feature can either assist in analyzing the structural behaviors with the influence of nuclear swelling or provide guidance to design the structure to withstand irradiation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Light-front holography model of the EMC effect

A new two-component model of the EMC effect based on Light-Front Holographic QCD (LFHQCD) is presented. The model suggests the EMC effect is the result of the nuclear potential breaking SU(6) symmetry. The model separates the $F_{2}^{A}$ nuclear structure function into two parts: a free contribution, involving the addition of proton and neutron structure functions weighted by the number of protons and neutrons respectively, and a nuclear/medium modified contribution that involves a universal function for all nuceli. Further, the model displays a connection with the correlation between the size of the EMC effect and the SRC pair density, a 2 - extracted from kinematic plateaus at around x > 1 in inclusive quasi-elastic (QE) scattering.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Toward shell model interactions with credible uncertainties

Background: The nuclear shell model is a powerful framework for predicting nuclear structure observables, but relies on interaction matrix elements fit to experimental data as its inputs. Extending the shell model's applicability, particularly toward dripline nuclei, requires efficient fitting methods and credible uncertainty quantification. Traditional approaches face computational challenges and may underestimate uncertainties. Purpose: We develop and test a framework combining eigenvector continuation and Markov chain Monte Carlo to efficiently fit shell model interaction matrix elements and quantify their uncertainties. Methods: Eigenvector continuation is used to emulate shell model calculations, reducing computational costs. The emulator enables Markov chain Monte Carlo sampling to optimize interaction matrix elements and rigorously assess parametric uncertainties. Here, the framework is benchmarked using the USDB interaction in the 𝑠⁢𝑑 shell. Results: The emulator reproduces the USDB interaction with negligible error, validating its use in shell model fitting applications. However, we find that to obtain credible predictive intervals, the model defect of the shell model itself, rather than experimental or emulator error, must be taken into account in order to obtain credible uncertainties. Conclusions: The proposed framework provides an efficient and rigorous approach for fitting shell model interactions and quantifying uncertainties. Further, the normality assumption used in the past appears sufficient to describe the distribution of interaction matrix elements. However, it is crucial to account for model correlations to avoid underestimating uncertainties.

Nuclear forces↗
DOE OSTI2021

Grizzly Development for Light Water Reactor and Advanced Reactor Applications in Fiscal Year 2021

This report summarizes work performed during Fiscal Year (FY) 2021 at Idaho National Laboratory (INL) for the U.S. Department of Energy’s Nuclear Engineering Advanced Modeling and Simulation (NEAMS) program for the Structural Materials and Chemistry Technical Area in the work package entitled “MS-21IN050106 - Structural Materials - INL.” This effort mainly focused on development and application of capabilities for engineering-scale analysis of nuclear reactor structural components in the Grizzly and BlackBear codes. These efforts include performance improvements and application of models for high-temperature component response, cluster dynamics modeling of precipitation in light water reactor pressure vessel steel, engineering-scale capability development in the areas of concrete simulation and reactor pressure vessel analysis, and preparation for and conducting an independent assessment of the adherence of these codes to software quality standards.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Investigating the effects of precise mass measurements of Ru and Pd isotopes on machine learning mass modeling

Atomic masses are a foundational quantity in our understanding of nuclear structure, astrophysics, and fundamental symmetries. The longstanding goal of creating a predictive global model for the binding energy of a nucleus remains a significant challenge, however, and prompts the need for precise measurements of atomic masses to serve as anchor points for model developments. We present precise mass measurements of neutron-rich Ru and Pd isotopes performed at the Californium Rare Isotope Breeder Upgrade facility at Argonne National Laboratory using the Canadian Penning Trap mass spectrometer. The masses of 108 Ru, 110 Ru, and 116 Pd were measured to a relative mass precision $\delta$⁢$m/m$ ≈ 10 -8 via the phase-imaging ion-cyclotron-resonance technique, and represent an improvement of approximately an order of magnitude over previous measurements. Further, these mass data were used in conjunction with the physically interpretable machine learning (PIML) model, which uses a mixture density neural network to model mass excesses via a mixture of Gaussian distributions. The effects of our new mass data on a Bayesian-updating of a PIML model are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Scaling approach to nuclear structure in high-energy heavy-ion collisions

In high-energy heavy-ion collisions, the initial condition of the produced quark-gluon plasma (QGP) and its evolution are sensitive to collective nuclear structure parameters describing the shape and radial profiles of the nuclei. Here, we find a general scaling relation between these parameters and many experimental observables such as elliptic flow, triangular flow, and particle multiplicity distribution. In particular, the ratios of observables between two isobar systems depend only on the differences of these parameters, but not on the details of the final state interactions, hence offering a new way to constrain the QGP initial condition. Using this scaling relation, we show how the structure parameters of $^{96}_{44}$Ru and $^{96}_{40}$Zr conspire to produce the rich centrality dependences of these ratios, as measured by the STAR Collaboration. Our scaling approach demonstrates that isobar collisions are a precision tool to probe the initial condition of heavy-ion collisions, as well as the collective nuclear structures, including the neutron skin, of the atomic nuclei across energy scales.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Possible octupole deformation of 208 Pb and the ultracentral v 2 to v 3 puzzle

Recent measurements have established the sensitivity of ultracentral heavy-ion collisions to the deformation parameters of nonspherical nuclei. In the case of 129 Xe collisions, a quadrupole deformation of the nuclear profile led to an enhancement of elliptic flow in the most central collisions. In 208 Pb collisions a discrepancy exists in similar centralities, where either elliptic flow is overpredicted or triangular flow is underpredicted by hydrodynamic models; this is known as the v 2 -to-v 3 puzzle in ultracentral collisions. Motivated by low-energy nuclear structure calculations, we consider the possibility that 208Pb nuclei could have a pear-shape deformation (octupole), which has the effect of increasing triangular flow in central PbPb collisions. Using the recent data from ALICE and ATLAS, we reexamine the v 2 -to-v 3 puzzle in ultracentral collisions, including new constraints from recent measurements of the triangular cumulant ratio v 3 {4}/v 3 {2} and comparing two different hydrodynamic models. We find that while an octupole deformation would slightly improve the ratio between v 2 and v 3 , it is at the expense of a significantly worse triangular flow cumulant ratio. In fact, the latter observable prefers no octupole deformation, with β 3 ≲ 0.0375 for 208 Pb, and is therefore consistent with the expectation for a doubly-magic nucleus even at top collider energies. Furthermore, the v 2 -to-v 3 puzzle remains a challenge for hydrodynamic models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Shape of atomic nuclei in heavy ion collisions

In the hydrodynamic model description of heavy ion collisions, the final-state anisotropic flows v n are linearly related to the strengths of the multipole shape of the distribution of nucleons in the transverse plane, ε n : v n ∝ε n . The ε n , for n=1, 2, 3, 4, are sensitive to the shapes of the colliding ions, characterized by the quadrupole β 2 , octupole β 3 , and hexadecapole β 4 deformations. This sensitivity is investigated analytically and also in a Monte Carlo Glauber model. One observes a robust linear relation, $\langleε^{2}_{n}\rangle$ = $a^{'}_{n} + b^{'}_{n}β^{2}_{n}$, for events in a fixed centrality. The $\langleε^{2}_{1}\rangle$ has a contribution from β 3 and β 4 , and $\langleε^{2}_{3}\rangle$ from β 4 . In ultracentral collisions, there are little cross contributions between β 2 and ε 3 and between β 3 and ε 2 , but clear cross contributions are present in noncentral collisions. Additionally, $\langleε^{2}_{n}\rangle$ are insensitive to nonaxial shape parameters such as the triaxiality. This is good news because the measurements of v 2 , v 3 , and v 4 can be used to constrain simultaneously the β 2 , β 3 , and β 4 values. This is best done by comparing two colliding ions with similar mass numbers and therefore nearly identical $a^{'}_{n}$, to obtain a simple equation that relates the β n of the two species. Finally, this opens up the possibility to map the shape of the atomic nuclei at a timescale (<10 –24 s) much shorter than probed by low-energy nuclear structure physics (<10 –21 s), which ultimately may provide information complementary to that obtained in the nuclear structure experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

SU(3)-guided realistic nucleon-nucleon interactions for large-scale calculations

We examine nucleon-nucleon realistic interactions, based on their SU(3) decomposition to SU(3)-symmetric components. We find that many of these interaction components are negligible, which, in turn, allows us to identify a subset of physically relevant components that are sufficient to describe the structure of low-lying states in 12C and related observables, such as excitation energies, electric quadrupole transitions, and rms radii. Here, we find that paring down the interaction by half or more yields results that practically coincide with the corresponding ab initio calculations with the full interaction. In addition, we show that while various realistic interactions differ in their SU(3) decomposition, their renormalized effective counterparts exhibit a striking similarity and composition that can be linked to dominant nuclear features such as deformation, pairing, clustering, and spin-orbit effect.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Accessing the Single-Particle Structure of the Pygmy Dipole Resonance in 208 Pb

New experimental data on the neutron single-particle character of the Pygmy Dipole Resonance (PDR) in Pb 208 are presented. They were obtained from ( d , p ) and resonant proton scattering experiments performed at the Q3D spectrograph of the Maier-Leibnitz Laboratory in Garching, Germany. The new data are compared to the large suite of complementary, experimental data available for Pb 208 and establish ( d , p ) as an additional, valuable, experimental probe to study the PDR and its collectivity. Furthermore, besides the single-particle character of the states, different features of the strength distributions are discussed and compared to large-scale shell model (LSSM) and energy-density functional plus quasiparticle-phonon model theoretical approaches to elucidate the microscopic structure of the PDR in Pb 208 .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

In-beam γ-ray spectroscopy of 68 Fe from charge exchange on 68 Co projectiles

Excited states in the neutron-rich nucleus 68 Fe were populated using a 9 Be( 68 Co, 68 Fe + γ)X charge-exchange reaction at 95 MeV/u. The new γ-ray transitions reported here for the first time complement data from β-decay studies and nucleon knockout reactions. In comparison to shell-model calculations with the LNPS effective interaction, two candidate states for the $6$$^{+}_{1}$ level emerge. Here, the distinct population pattern of excited states and the magnitude of the cross section, σ inc = 0.51(6) mb, make this reaction a promising one for future in-beam γ -ray spectroscopy. Reaction calculations with nuclear structure input from a new, locally optimized Hamiltonian, f7j4a, together with general considerations for heavy-ion-induced charge-exchange reactions appear consistent with most of the observations, although challenges remain.

59 ≤ A ≤ 89↗
DOE OSTI2023

Demonstration of new fracture criteria based on micro-structure and compare to empirical model and measurements

The US nuclear industry is currently exploring extending the peak rod average burnup limits above the current regulatory limit of 62 GWd/tU. A potential concern for fuel exceeding the burnup limit is the fragmentation during a temperature transient such as a loss-of-coolant accident (LOCA). In the event of cladding failure, the fragmented fuel could relocate and disperse within the reactor. The potential impact of fuel fragmentation, relocation and dispersal (FFRD) on licensing assumptions for burnup extension has focused a great amount of efforts and research on this topic.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Single-particle and dipole excitations in Co 62

An extensive study of the level structure of 62 Co has been performed following a complex multinucleon transfer reaction, 26 Mg( 48 Ca, 2α3npγ) 62 Co, at beam energies of 275, 290, and 320 MeV. The combination of the Gammasphere array, the fragment mass analyzer, and a focal-plane ionization chamber was used to identify and delineate excited levels in 62 Co. A considerable extension to the 62 Co level scheme is proposed with firm spin-parity values assigned on the basis of angular distribution and correlation analyses. Here, various level sequences built upon states of single-particle character have been observed, and an interpretation of these structures in the framework of the spherical shell model is presented. At moderate spins, two dipole bands have been observed and, based on their phenomenological study, a possible magnetic rotation character is suggested. However, theoretical calculations performed using the particle rotor model support magnetic rotation for only one of these dipole bands.

59 ≤ A ≤ 89↗
DOE OSTI2020

Summary of Structural Material Modeling Development for the NEAMS Program in Fiscal Year 2020

This report summarizes work performed during Fiscal Year (FY) 2020 at Idaho National Laboratory (INL) for the U.S. Department of Energy?s Nuclear Engineering Advanced Modeling and Simulation (NEAMS) program for the Structural Materials and Chemistry Technical Area in the work package entitled "MS- 20IN050104 - Structural Materials - INL." The Structural Materials and Chemistry Technical Area is a relatively new component of the NEAMS program, and is currently focusing on developing simulation capabilities to support the deployment of nuclear energy in the areas of molten salt reactor chemistry, light water reactor (LWR) structural material degradation, and structural material behavior for advanced reactor applications. INL performed work for to advance capabilities for simulation of structural material behavior in both LWR and advanced reactor applications in the work described here.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Event Horizon Telescope imaging of the archetypal blazar 3C 279 at an extreme 20 microarcsecond resolution

3C 279 is an archetypal blazar with a prominent radio jet that show broadband flux density variability across the entire electromagnetic spectrum. We use an ultra-high angular resolution technique – global Very Long Baseline Interferometry (VLBI) at 1.3 mm (230 GHz) – to resolve the innermost jet of 3C 279 in order to study its fine-scale morphology close to the jet base where highly variable γ-ray emission is thought to originate, according to various models. The source was observed during four days in April 2017 with the Event Horizon Telescope at 230 GHz, including the phased Atacama Large Millimeter/submillimeter Array (ALMA), at an angular resolution of ∼20 μas (at a redshift of z = 0.536 this corresponds to ∼0.13 pc ∼ 1700 Schwarzschild radii with a black hole mass MBH = 8 × 108 M⊙). Imaging and model-fitting techniques were applied to the data to parameterize the fine-scale source structure and its variation. We find a multicomponent inner jet morphology with the northernmost component elongated perpendicular to the direction of the jet, as imaged at longer wavelengths. The elongated nuclear structure is consistent on all four observing days and across different imaging methods and model-fitting techniques, and therefore appears robust. Owing to its compactness and brightness, we associate the northern nuclear structure as the VLBI “core”. This morphology can be interpreted as either a broad resolved jet base or a spatially bent jet. We also find significant day-to-day variations in the closure phases, which appear most pronounced on the triangles with the longest baselines. Our analysis shows that this variation is related to a systematic change of the source structure. Two inner jet components move non-radially at apparent speeds of ∼15 c and ∼20 c (∼1.3 and ∼1.7 μas day−1, respectively), which more strongly supports the scenario of traveling shocks or instabilities in a bent, possibly rotating jet. The observed apparent speeds are also coincident with the 3C 279 large-scale jet kinematics observed at longer (cm) wavelengths, suggesting no significant jet acceleration between the 1.3 mm core and the outer jet. The intrinsic brightness temperature of the jet components are ≲1010 K, a magnitude or more lower than typical values seen at ≥7 mm wavelengths. The low brightness temperature and morphological complexity suggest that the core region of 3C 279 becomes optically thin at short (mm) wavelengths.Key words: galaxies: active / galaxies: jets / galaxies: individual: 3C 279 / techniques: interferometric⋆ The data are only available at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/cat/J/A+A/640/A69 and at https://eventhorizontelescope.org/for-astronomers/data⋆⋆ Deceased.

79 ASTRONOMY AND ASTROPHYSICS↗