Search NASA⌕ Search

SEARCH · Search NASA

Results for “ONBOARD NAVIGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

The Deep Space Atomic Clock: Ushering in a New Paradigm for Radio Navigation and Science

The Deep Space Atomic Clock (DSAC) mission will demonstrate the on-orbit performance of a high-accuracy, high-stability miniaturized mercury ion atomic clock during a year-long experiment in Low Earth Orbit. DSAC's timing error requirement provides the frequency stability necessary to perform deep space navigation based solely on one-way radiometric tracking data. Compared to a two-way tracking paradigm, DSAC-enabled one-way tracking will benefit navigation and radio science by increasing the quantity and quality of tracking data. Additionally, DSAC also enables fully-autonomous onboard navigation useful for time-sensitive situations. The technology behind the mercury ion atomic clock and a DSAC mission overview are presented. Example deep space applications of DSAC, including navigation of a Mars orbiter and Europa flyby gravity science, highlight the benefits of DSAC-enabled one-way Doppler tracking.

atomic clock↗
NASA NTRS1984

Integrated cockpit design for the Army helicopter improvement program

The main Army Helicopter Improvement Program (AHIP) mission is to navigate precisely, locate targets accurately, communicate their position to other battlefield elements, and to designate them for laser guided weapons. The onboard navigation and mast-mounted sight (MMS) avionics enable accurate tracking of current aircraft position and subsequent target location. The AHIP crewstation development was based on extensive mission/task analysis, function allocation, total system design, and test and verification. The avionics requirements to meet the mission was limited by the existing aircraft structural and performance characteristics and resultant space, weight, and power restrictions. These limitations and night operations requirement led to the use of night vision goggles. The combination of these requirements and limitations dictated an integrated control/display approach using multifunction displays and controls.

Drennen, T.↗
NASA NTRS1998

The Athena Mars Rover Science Payload

The Mars Surveyor missions that will be launched in April of 2001 will include a highly capable rover that is a successor to the Mars Pathfinder mission's Sojourner rover. The design goals for this rover are a total traverse distance of at least 10 km and a total lifetime of at least one Earth year. The rover's job will be to explore a site in Mars' ancient terrain, searching for materials likely to preserve a record of ancient martian water, climate, and possibly biology. The rover will collect rock and soil samples, and will store them for return to Earth by a subsequent Mars Surveyor mission in 2005. The Athena Mars rover science payload is the suite of scientific instruments and sample collection tools that will be used to perform this job. The specific science objectives that NASA has identified for the '01 rover payload are to: (1) Provide color stereo imaging of martian surface environments, and remotely-sensed point discrimination of mineralogical composition. (2) Determine the elemental and mineralogical composition of martian surface materials. (3) Determine the fine-scale textural properties of these materials. (4) Collect and store samples. The Athena payload has been designed to meet these objectives. The focus of the design is on field operations: making sure the rover can locate, characterize, and collect scientifically important samples in a dusty, dirty, real-world environment. The topography, morphology, and mineralogy of the scene around the rover will be revealed by Pancam/Mini-TES, an integrated imager and IR spectrometer. Pancam views the surface around the rover in stereo and color. It uses two high-resolution cameras that are identical in most respects to the rover's navigation cameras. The detectors are low-power, low-mass active pixel sensors with on-chip 12-bit analog-to-digital conversion. Filters provide 8-12 color spectral bandpasses over the spectral region from 0.4 to 1.1 micron Narrow-angle optics provide an angular resolution of 0.28 mrad/pixel, nearly a factor of four higher than that of the Mars Pathfinder and Mars Surveyor '98 cameras. Image compression will be performed using a wavelet compression algorithm. The Mini-Thermal Emission Spectrometer (Mini-TES) is a point spectrometer operating in -the thermal IR. It produces high spectral resolution (5 /cm) image cubes with a wavelength range of 5-40 gm, a nominal signal/noise ratio of 500:1, and a maximum angular resolution of 7 mrad (7 cm at a distance of 10 in). The wavelength region over which it operates samples the diagnostic fundamental absorption features of rockforming minerals, and also provides some capability to see through dust coatings that could tend to obscure spectral features. The mineralogical information that Mini-TES provides will be used to select from a distance the rocks and soils that will be investigated in more detail and ultimately sampled. Mini-TES is derived from the MO/MGS TES instrument, but is significantly smaller and simpler. The instrument uses an 8-cm Cassegrain telescope, a Michelson interferometer, and uncooled pyroelectric detectors. Along with its mineralogical capabilities, Mini-TES can provide information on the thermophysical properties of rocks and soils. Viewing upward, it can also provide temperature profiles through the martian atmospheric boundary layer. Elemental and Mineralogical Composition: Once promising samples have been identified from a distance using Pancam/Mini-TES, they will be studied in detail using up to three compositional sensors that can be placed directly against them by an Instrument Arm. The two compositional sensors, presently on the payload are an Alpha-Proton-X-Ray Spectrometer (APXS), and a Mossbauer Spectrometer. The APXS is derived closely from the instrument that flew on Mars Pathfinder. Radioactive alpha sources and three detection modes (alpha, proton, and x-ray) provide elemental abundances of rocks and soils to complement and constrain mineralogical data. The Athena APXS will have a revised mechanical design that will cut down significantly on backscattering of alpha particles from martian atmospheric carbon. It will also include a target of known elemental composition that will be used for calibration purposes. The Athena Mossbauer Spectrometer is a diagnostic instrument for the mineralogy and oxidation state of Fe-bearing phases, which are particularly important on Mars. The instrument measures the resonant absorption of gamma rays produced by a Co-57 source to determine splitting of nuclear energy levels in Fe atoms that is related to the electronic environment surrounding them. It has been under development for space flight for many years at the Technical University of Darmstadt. The Mossbauer Spectrometer (and the other arm instruments) will be able to view a small permanent magnet array that will attract magnetic particles in the martian soil. The payload may also include a Raman Spectrometer. If included, the Raman Spectrometer will provide precise identification of major and minor mineral phases. It requires no sample preparation, and is also sensitive to organics. Fine-Scale Texture: The Instrument Arm a also carries a Microscopic Imager that will obtain high-resolution monochromatic images of the same materials for which compositional data will be obtained. Its spatial resolution is 20 micron/pixel over a 1 cm depth of field, and 40 micron/pixel over a 1-cm depth of field. Like Pancam, it uses the same active pixel sensor detectors and electronics as the rover's navigation cameras. The Instrument Arm is a three degree-of-freedom arm that uses designs and components from the Mars Pathfinder and Mars Surveyor '98 projects. Its primary function is instrument positioning. Along with the instruments noted above, it also carries a brush that can be used to remove dust and other loose coatings from rocks. Sample Collection and Storage: Martian rock and soil samples will be collected using a low-power rotary coring drill called the Mini-Corer. An important characteristic of this device is that it can obtain intact samples of rock from up to 5 cm within strong boulders and bedrock, Nominal core dimensions are 8xl7 mm. The Mini-Corer drills a core to the commanded depth in a rock, shears it off, retains it, and extracts it. It can also acquire samples of loose soil, using soil sample cups that are pressed downward into loose material. The Mini-Corer can drill at angles from vertical to 45' off vertical. It has six interchangeable bits for long life. Mechanical damage to the sample during drilling is minimal, and heating is negligible. After acquisition, the sample may be viewed by the arm instruments, and/or placed in one of 104 compartments in the Sample Container. A subset of the acquired samples may be replaced with other samples obtained later if desired. The Sample Container has no moving parts, and is mounted external to the rover for easy removal by the Mars Surveyor 2005 flight system. Operation of the rover will make extensive use of automated onboard navigation and hazard avoidance capabilities. Otherwise, use of onboard autonomy is minimal. Data downlink capability is about 40 Mbit/sol, and the use of the Mars Surveyor '01 orbiter for data relay imposes a limit of at most two command cycles per sol. Because of the significant amount of time available between command cycles, all payload elements will be operated sequentially, rather than in parallel.; this approach also significantly simplifies operations and minimizes peak power usage. The landing site for the '01 rover has not been selected yet. Site selection will make as full use as possible of Mars Global Surveyor data, and will involve substantial input from the broad Mars science community. Summary: The following table describes the mass, power, providers, and key scientific objectives of all the major elements of the Athena payload. Additional Athena payload information may be found at: http://astrosun.tn.cornell.edu/athena/index.html. Additional information contained in the original.

Squyes, S. W.↗
NASA NTRS2007

C-20A/GIII Precision Autopilot Development in Support of NASA's UAVSAR Program

The NASA Unmanned Aerial Vehicle Synthetic Aperture Radar (UAVSAR) program is developing a Synthetic Aperture Radar (SAR) for ground measurements. A key element for the success of this program is a Platform Precision Autopilot (PPA). An interim vehicle (NASA C-20AJGlll) was selected to carry the radar pod and develop the PPA. The PPA interfaces with the C- 20AIG Ill aircraft by imitating the output of an Instrument Landing System (ILS) approach. This technique retains the safeguards in the aircraft's autopilot. The PPA entered initial flight testing in early 2007. The PPA uses a Kalman filter to generate a real-time position solution with information from the C-20AIGIII and a real-time differential GPS unit designed by JPL. The real-time navigation solution is used to compute commands (Guidance and Control subsystems) which in turn drive two modified ILS testers. The ILS tester units produce modulated RF signals fed to the onboard navigation receiver. These correction signals allow the C-20NGIII autopilot to fly a simulated ILS approach that meets the PPA requirements for UAVSAR applications. The PPA requirement is to make repeat pass flights within a ten meter tube over a 200 kilometer course in conditions of cairn to light turbulence. Flight test results are expected to be available at the time of the NASA Science Technology Conference 2007

Lee, James A.↗
NASA NTRSDate not supplied

Robust Cislunar Trajectory Optimization Via Midcourse Correction and Optical Navigation Scheduling

This paper presents a new approach to optimal trajectory design that considers uncertainties in the system, referred to herein as robust trajectory optimization. This approach assumes an existing reference trajectory and optimizes the locations of midcourse correction burns and utilization of onboard navigation sensors to minimize dispersions in ∆v or final position. Navigation errors, maneuver execution errors, orbit insertion errors, and environmental modeling errors are considered. The application in this paper is cislunar flight with the goal of injecting into a Near-Rectilinear Halo Orbit for rendezvous with a target vehicle. Two complementary optimization problems are proposed. One problem minimizes the total ∆v dispersion subject to a final position dispersion constraint. The other problem minimizes the final position dispersion subject to a total ∆v dispersion constraint. The results from each optimization problem are shown for a complete mission profile.

Linear Covariance Analysis↗
NASA NTRS2011

Sensitivity of Magnetospheric Multi-Scale (MMS) Mission Navigation Accuracy to Major Error Sources

The Magnetospheric Multiscale (MMS) mission consists of four satellites flying in formation in highly elliptical orbits about the Earth, with a primary objective of studying magnetic reconnection. The baseline navigation concept is independent estimation of each spacecraft state using GPS pseudorange measurements referenced to an Ultra Stable Oscillator (USO) with accelerometer measurements included during maneuvers. MMS state estimation is performed onboard each spacecraft using the Goddard Enhanced Onboard Navigation System (GEONS), which is embedded in the Navigator GPS receiver. This paper describes the sensitivity of MMS navigation performance to two major error sources: USO clock errors and thrust acceleration knowledge errors.

Olson, Corwin↗
NASA NTRS2011

Sensitivity of Magnetospheric Multi-Scale (MMS) Mission Naviation Accuracy to Major Error Sources

The Magnetospheric Multiscale (MMS) mission consists of four satellites flying in formation in highly elliptical orbits about the Earth, with a primary objective of studying magnetic reconnection. The baseline navigation concept is independent estimation of each spacecraft state using GPS pseudorange measurements referenced to an Ultra Stable Oscillator (USO) with accelerometer measurements included during maneuvers. MMS state estimation is performed onboard each spacecraft using the Goddard Enhanced Onboard Navigation System (GEONS), which is embedded in the Navigator GPS receiver. This paper describes the sensitivity of MMS navigation performance to two major error sources: USO clock errors and thrust acceleration knowledge errors.

Olson, Corwin↗
NASA NTRS2011

Initial Considerations for Navigation and Flight Dynamics of a Crewed Near-Earth Object Mission

A crewed mission to a Near-Earth Object (NEO) was recently identified as a NASA Space Policy goal and priority. In support of this goal, a study was conducted to identify the initial considerations for performing the navigation and flight dynamics tasks of this mission class. Although missions to a NEO are not new, the unique factors involved in human spaceflight present challenges that warrant special examination. During the cruise phase of the mission, one of the most challenging factors is the noisy acceleration environment associated with a crewed vehicle. Additionally, the presence of a human crew necessitates a timely return trip, which may need to be expedited in an emergency situation where the mission is aborted. Tracking, navigation, and targeting results are shown for sample human-class trajectories to NEOs. Additionally, the benefit of in-situ navigation beacons on robotic precursor missions is presented. This mission class will require a longer duration flight than Apollo and, unlike previous human missions, there will likely be limited communication and tracking availability. This will necessitate the use of more onboard navigation and targeting capabilities. Finally, the rendezvous and proximity operations near an asteroid will be unlike anything previously attempted in a crewed spaceflight. The unknown gravitational environment and physical surface properties of the NEO may cause the rendezvous to behave differently than expected. Symbiosis of the human pilot and onboard navigation/targeting are presented which give additional robustness to unforeseen perturbations.

Holt, Greg N.↗
NASA NTRS1984

An approach to autonomous, onboard orbit determination

An orbit determination subsystem that will operate as an integral part of an autonomous, onboard navigation system is presented and analyzed. The navigation system is required to interface solely with the downlink telemetry stream and uplink command stream of an existing class of geostationary satellites. In particular, the orbit will be determined from a set of onboard sensors, which previously were used only for attitude determination. The design of the orbit determination subsystem is described in detail. The rationale behind the choice of each component of the design is given. Finally, the performance of the orbit determination subsystem, under a variety of assumptions, is determined by a combination of numerical simulation and analytical methods.

Mease, K. D.↗
NASA NTRSDate not supplied

Evaluating Lunar Descent and Landing Performance From a Near Rectilinear Halo Orbit Using Linear Covariance Resetting Techniques

Upcoming lunar programs are striving the achieve precision landing in a safe and robust manner. Various elements impact this mission objective ranging from on-orbit operations with ground station tracking to incorporating relative sensors with hazard detection and avoidance (HDA) to support the final approach and landing phase. Modeling the impacts of ground tracking, trajectory replanning, relative navigation sensors, and particularly a potential HDA system on the integrated closed-loop GN\&C system performance poses a unique challenge due to the complexity and interaction with multiple facets of the vehicle including the trajectory design, sensing hardware, navigation system, guidance and targeting, and the overall mission concept of operations. This paper outlines techniques to systematically analyze and compare the performance impacts of ground tracking and replanning and an HDA system where the onboard navigation errors are reset or uploaded from an external source and the vehicle's reference trajectory is regenerated requiring the system dispersions to also be reset to reflect this in-flight profile adjustment. To illustrate the application of these general techniques for analyzing the performance impacts due to incorporating these resetting events, they are demonstrated with a human lunar descent and landing scenario starting from a near rectilinear halo orbit (NRHO) until the vehicle precisely reaches its predetermined landing site on the lunar surface. Performance metrics such as inertial and relative navigation errors, trajectory dispersions, footprint dispersions, and propellant usage are provided.

GN&C↗
NASA NTRS1975

A complementary filtering technique for deriving aircraft velocity and position information

An onboard navigation system which employed complementary filtering was developed to provide velocity and position information. The inputs to the mix filter included both acceleration inputs, which provided high-frequency position and velocity information, and radar position inputs, which provided the low-frequency position and velocity information. Onboard aircraft instrumentation, including attitude reference gyros and body-mounted accelerometers, was used to provide the acceleration information. An in-flight comparison of signal quality and accuracy showed good agreement between the complementary filtering system and an aided inertial navigation system. Furthermore, the complementary filtering system was proven to be satisfactory in control and display system applications for both automatic and pilot-in-the-loop instrument approaches and landings.

Niessen, F. R.↗
NASA NTRS1978

GPS-aided Space Shuttle navigation

In the present paper, specific GPS (Global Positioning System) aided Shuttle navigation are presented as examples of the navigation performance prediction process. The process described is a statistical covariance error analysis. To facilitate detailing, the process is broken down into four portions with sharply limited interfaces. Considerations of mission scenarios form one distinct package of computer routines. Simulation of the onboard navigation filter is another facet of the process, as are the larger system covariance program and the GPS segment covariance simulation. The combination of these computer tools permits proper evaluation of the multitude of correlated error sources affecting GPS-aided Shuttle navigation.

Matchett, G.↗
NASA NTRSDate not supplied

Distributed Sensing and Computer Vision Methods for Advanced Air Mobility Approach and Landing

Advanced Air Mobility (AAM) aircraft require precision approach and landing systems (PALS) in several types of environments such as urban, suburban, and rural. It is difficult to implement current state-of-the-art methods approved for automated approach and landing for AAM operations. However, existing technology and systems that use vision, IR, radar, and GPS methods provide baseline perception and sensing requirements for AAM aircraft approach and landing. This paper focuses on vision-based PAL and computer vision feature correspondence methods to demonstrate a baseline navigation system while adhering to the Federal Aviation Administration requirements and regulations. The coplanar algorithm determines pose estimation, which feeds into an Extended Kalman filter that combines IMU with vision to create a sensor fusion navigation solution for GPS-denied environments. The state estimate leads to glideslope and localizer error computations, which will be pertinent for designing and deriving guidance laws and control laws for AAM PALS. The IMU and vision navigation solution provides promising simulation results for AAM PALS. This paper builds on previous work by incorporating high fidelity simulations with computer graphics rendering to demonstrate a distributed sensor network to track an AAM aircraft during approach and landing to compare with the aircraft's onboard navigation solution.

Evan Kawamura↗
NASA NTRS2002

Orbit Determination Issues for Libration Point Orbits

Libration point mission designers require knowledge of orbital accuracy for a variety of analyses including station keeping control strategies, transfer trajectory design, and formation and constellation control. Past publications have detailed orbit determination (OD) results from individual libration point missions. This paper collects both published and unpublished results from four previous libration point missions (ISEE (International Sun-Earth Explorer) -3, SOHO (Solar and Heliospheric Observatory), ACE (Advanced Composition Explorer) and MAP (Microwave Anisotropy Probe)) supported by Goddard Space Flight Center's Guidance, Navigation & Control Center. The results of those missions are presented along with OD issues specific to each mission. All past missions have been limited to ground based tracking through NASA ground sites using standard range and Doppler measurement types. Advanced technology is enabling other OD options including onboard navigation using seaboard attitude sensors and the use of the Very Long Baseline Interferometry (VLBI) measurement Delta Differenced One-Way Range (DDOR). Both options potentially enable missions to reduce coherent dedicated tracking passes while maintaining orbital accuracy. With the increased projected loading of the DSN (Deep Space Network), missions must find alternatives to the standard OD scenario.

Beckman, Mark↗
NASA NTRS2007

Single-Frequency GPS Relative Navigation in a High Ionosphere Orbital Environment

The Global Positioning System (GPS) provides a convenient source for space vehicle relative navigation measurements, especially for low Earth orbit formation flying and autonomous rendezvous mission concepts. For single-frequency GPS receivers, ionospheric path delay can be a significant error source if not properly mitigated. In particular, ionospheric effects are known to cause significant radial position error bias and add dramatically to relative state estimation error if the onboard navigation software does not force the use of measurements from common or shared GPS space vehicles. Results from GPS navigation simulations are presented for a pair of space vehicles flying in formation and using GPS pseudorange measurements to perform absolute and relative orbit determination. With careful measurement selection techniques relative state estimation accuracy to less than 20 cm with standard GPS pseudorange processing and less than 10 cm with single-differenced pseudorange processing is shown.

Conrad, Patrick R.↗
NASA NTRS1989

Shuttle tethered operations: The effect on orbital trajectory and inertial navigation

The first full scale test of a large tethered satellite system is planned. The Orbiter will be linked to a 500 kg payload by a 20 km tether, an action with a profound effect on the trajectory of the Orbiter. For the first time in the history of the Shuttle program, the vehicle will conduct prolonged operations with the center of mass of the orbiting system a significant distance from the center of mass of the Space Shuttle Orbiter, a violation of the fundamental assumption made in both the Orbiter ground-based and onboard navigation software. Inertial navigation of tethered operations with the Shuttle is further complicated by the presence of non-conservative forces in the system: Reaction Control System (RCS) translational effects, atmospheric drag, and electro-magnetic dynamics. These can couple with the conservative tether dynamics effects, and degrade the navigation software performance. The primary effects are examined on the Orbiter's trajectory, coupling by conservative forces during tethered operations, and the impact of both on the ability to meet inertial navigation constraints. The impact of electrodynamics, different RCS control modes, commanded attitudes, and attitude deadbands are presented. Operational guidelines which optimize successful mission navigation, and necessary navigation constraints are discussed.

Lardas, Mark N.↗
NASA NTRS2018

Autonomous Small Body Mapping and Spacecraft Navigation

Current methods for pose and shape estimation of small bodies, such as comets and asteroids, rely on extensive ground support and significant use of radiometric measurements using the Deep Space Network. The Stereo-Photoclinometry (SPC) technique is currently used to provide detailed topological information about a small body as well as its absolute orientation and position. While this technique has produced very accurate estimates, the core algorithm cannot be run in real-time and requires a team of scientists on the ground who must communicate with the spacecraft in order to oversee SPC operations. Autonomous onboard navigation addresses these limitations by eliminating the need for human oversight. In this paper, we present an optimization-based estimation algorithm for navigation that allows the spacecraft to autonomously approach and maneuver around an unknown small body by mapping its geometric shape, estimating its orientation, and simultaneously determining the trajectory of the center of mass of the small body. We show the effectiveness of the proposed algorithm using simulated data from a previous flight mission to Comet 67P.

Bhaskaran, Shyamkumar↗