Search NASA⌕ Search

SEARCH · Search NASA

Results for “OSCILLATING CYLINDER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Free-piston Stirling technology for space power

An overview is presented of the NASA Lewis Research Center free-piston Stirling engine activities directed toward space power. This work is being carried out under NASA's new Civil Space Technology Initiative (CSTI). The overall goal of CSTI's High Capacity Power element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA space missions. The Stirling cycle offers an attractive power conversion concept for space power needs. Discussed here is the completion of the Space Power Demonstrator Engine (SPDE) testing-culminating in the generation of 25 kW of engine power from a dynamically-balanced opposed-piston Stirling engine at a temperature ratio of 2.0. Engine efficiency was approximately 22 percent. The SPDE recently has been divided into two separate single-cylinder engines, called Space Power Research Engine (SPRE), that now serve as test beds for the evaluation of key technology disciplines. These disciplines include hydrodynamic gas bearings, high-efficiency linear alternators, space qualified heat pipe heat exchangers, oscillating flow code validation, and engine loss understanding.

Slaby, Jack G.↗
NASA NTRS1989

Free-piston Stirling technology for space power

An overview is presented of the NASA Lewis Research Center free-piston Stirling engine activities directed toward space power. This work is being carried out under NASA's new Civil Space Technology Initiative (CSTI). The overall goal of CSTI's High Capacity Power element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA space missions. The Stirling cycle offers an attractive power conversion concept for space power needs. Discussed here is the completion of the Space Power Demonstrator Engine (SPDE) testing-culminating in the generation of 25 kW of engine power from a dynamically-balanced opposed-piston Stirling engine at a temperature ratio of 2.0. Engine efficiency was approximately 22 percent. The SPDE recently has been divided into two separate single-cylinder engines, called Space Power Research Engine (SPRE), that now serve as test beds for the evaluation of key technology disciplines. These disciplines include hydrodynamic gas bearings, high-efficiency linear alternators, space qualified heat pipe heat exchangers, oscillating flow code validation, and engine loss understanding.

Slaby, Jack G.↗
NASA NTRS1992

The effect of a turbulent wake on the stagnation point. II - Heat transfer results

A phenomenological model is proposed which relates the effects of freestream turbulence to the increase in stagnation point heat transfer. The model requires both turbulence intensity and energy spectra as inputs to the unsteady velocity at the edge of the boundary layer. The form of the edge velocity contains both a pulsation of the incoming flow and an oscillation of the streamlines. The incompressible unsteady and time-averaged boundary layer response is determined by solving the momentum and energy equations. The model allows for arbitary two-dimensional geometry, however, results are given only for a circular cylinder. The time-averaged Nusselt number is determined theoretically and compared to existing experimental data.

Hanford, Anthony J.↗
NASA NTRS1985

The application of potential flow theory to the rotational dynamics of spheroids, disks, and cylinders

An example for the considered phenomenon in the area of cloud microphysics is the rotational motion of ice particles as they fall through the air. Of fundamental importance for the general problem is a knowledge of the magnitude of the torque exerted by the fluid on the translating object as well as the frequency of the rotational oscillation which results from this torque. The present investigation has the objective to obtain estimates of these quantities, and to assess the accuracy of these estimates. Torques and oscillation frequencies for spheroidal objects immersed in flow are computed for potential flow and compared to measured values. The results form a consistent picture in which the ratios of measured to potential flow values are always less than 1 but generally greater than 0.1. The reason for this is described in terms of the well-known deviations of real flow from potential flow. The reported results are of academic interest in filling a gap in the knowledge regarding the applicability of potential flow.

Weinheimer, A. J.↗
NASA NTRS1994

Slow Wave Vane Structure with Elliptical Cross-Section Slots, an Analysis

Mathematical analysis of the wave equation in cylinders with elliptical cross-section slots was performed. Compared to slow wave structures with rectangular slots higher impedance and lower power dissipation losses are evident. These features could lead to improved designs of traveling wave magnetrons and gigahertz backward-wave oscillators as well as linear traveling wave tubes with relatively shallow slots.

Kosmahl, Henry G.↗
NASA NTRS1993

Deriving Indicial Response From Navier-Stokes Equations

Report discusses research directed toward recasting indicial-response approach into form appropriate to study of vortex-induced oscillations and related aerodynamic and aeroelastic phenomena. Serves two purposes: to show how deficiencies of prior mathematical model overcome to include effects of memory necessary for modeling of oscillatory but otherwise equilibrium state; and using method developed to analyze particular case of flow past cylinder in periodic forced transverse motion.

Truong, K. V.↗
NASA NTRS2011

Method for Implementing Optical Phase Adjustment

A method has been developed to mechanically implement the optical phase shift by adjusting the polarization of the pump and probe beams in an NMOR (nonlinear magneto-optical rotation) magnetometer as the proper phase shift is necessary to induce self-oscillation. This innovation consists of mounting the pump beam on a ring that surrounds the atomic vapor sample. The propagation of the probe beam is perpendicular to that of the pump beam. The probe beam can be considered as defining the axis of a cylinder, while the pump beam is directed radially. The magnetic field to be measured defines a third vector, but it is also taken to lie along the cylinder axis. Both the pump and probe beams are polarized such that their electric field vectors are substantially perpendicular to the magnet field. By rotation of the ring supporting the pump beam, its direction can be varied relative to the plane defined by the probe electric field and the magnetic field to be measured.

Hovde, David C.↗
NASA NTRS1979

Electromagnetic propulsion alternatives

Mass drivers can serve to propel massive objects by expelling any available material as reaction mass, however, mass driver engines have several limitations such as relatively large payload size and dynamic stability problems. A number of alternative acceleration mechanisms exist which offer advantages for certain applications, such as higher acceleration at a sacrifice in efficiency, smaller possible size and decreased complexity at a sacrifice in service life, etc. The alternative concepts include several variants of the railgun, a family of superconducting slingshot oscillators, a momentum transformer, an impulse induction motor, and a family of hybrid synchronous accelerators. A potential application of considerable interest is the earth-based launching of space cargo or nuclear waste by using off-peak generating capacity to accelerate one ton cargo cylinders at intervals of several minutes.

Kolm, H.↗
NASA NTRS1991

The unsteady laminar boundary layer on an axisymmetric body subject to small-amplitude fluctuations in the free-stream velocity

The effect of small-amplitude, time-periodic, free-stream disturbances on an otherwise steady axisymmetric boundary layer on a circular cylinder is considered. Numerical solutions to the problem are presented, and an asymptotic solution to the flow, valid far downstream along the axis of the cylinder is detailed. Particular emphasis is placed on the unsteady eigensolutions that occur far downstream, which turn out to be very different from the analogous planar eigensolutions. These axisymmetric eigensolutions are computed numerically and also are described by asymptotic analyses valid for low and high frequencies of oscillation.

Duck, Peter W.↗
NASA NTRS1985

Unsteady Heat Transfer Due to Time-dependent Free Stream Velocity

The present work was undertaken in order to study the unsteady combined convection from a horizontal circular cylinder to a transverse flow. A coordinate perturbation method is used to transform the governing set of partial differential equations into a system of ordinary differential equations. The free stream time-dependent velocity was assumed to be sinusoidal and the boundary layer response due to both low as well as high frequencies of oscillation will be studied. Currently numerical solutions are being obtained for the distribution of the unsteady Nusselt number and the friction factor.

Gorla, R. S. R.↗
NASA NTRS1984

Atomic hydrogen maser active oscillator cavity and bulb design optimization

The performance characteristics and reliability of the active oscillator atomic hydrogen maser depend upon oscillation parameters which characterize the interaction region of the maser, the resonant cavity and atom storage bulb assembly. With particular attention to use of the cavity frequency switching servo (1) to reduce cavity pulling, it is important to maintain high oscillation level, high atomic beam flux utilization efficiency, small spin exchange parameter and high cavity quality factor. It is also desirable to have a small and rigid cavity and bulb structure and to minimize the cavity temperature sensitivity. Curves for a novel hydrogen maser cavity configuration which is partially loaded with a quartz dielectric cylinder and show the relationships between cavity length, cavity diameter, bulb size, dielectric thickness, cavity quality factor, filling factor and cavity frequency temperature coefficient are presented. The results are discussed in terms of improvement in maser performance resulting from particular design choices.

Peters, H. E.↗
NASA NTRS1978

Navier-Stokes calculations with a coupled strongly implicit method. Part 2: Spline solutions

A coupled strongly implicit method is combined with a deferred-corrector spline solver for the vorticity-stream function form of the Navier-Stokes equation. Solutions for cavity, channel and cylinder flows are obtained with the fourth-order spline 4 procedure. The strongly coupled spline corrector method converges as rapidly as the finite difference calculations and also allows for arbitrary large time increments for the Reynolds numbers considered. In some cases fourth-order smoothing or filtering is required in order to suppress high frequency oscillations.

Rubin, S. G.↗
NASA NTRS1980

Navier-Stokes calculations with a coupled strongly implicit method. II Spline deferred-corrector solutions

The coupled strongly implicit (CSIP) method described previously is combined with a deferred-corrector spline solver for the vorticity-stream function form of the Navier-Stokes equations. Solutions for cavity, channel and cylinder flows are obtained with the fourth-order spline 4 procedure. The strongly coupled spline corrector method converges as rapidly as the finite difference calculations and also allows for arbitrary large time increments for the Reynolds numbers considered (equal to or less than 1000). In some cases fourth-order smoothing or filtering is required in order to suppress high frequency oscillations.

Rubin, S. G.↗
NASA NTRS1990

Spurious frequencies as a result of numerical boundary treatments

The stability theory for finite difference Initial Boundary-Value approximations to systems of hyperbolic partial differential equations states that the exclusion of eigenvalues and generalized eigenvalues is a sufficient condition for stability. The theory, however, does not discuss the nature of numerical approximations in the presence of such eigenvalues. In fact, as was shown previously, for the problem of vortex shedding by a 2-D cylinder in subsonic flow, stating boundary conditions in terms of the primitive (non-characteristic) variables may lead to such eigenvalues, causing perturbations that decay slowly in space and remain periodic time. Characteristic formulation of the boundary conditions avoided this problem. A more systematic study of the behavior of the (linearized) one-dimensional gas dynamic equations under various sets of oscillation-inducing legal boundary conditions is reported.

Abarbanel, Saul↗
NASA NTRS1990

The effect of a turbulent wake on the stagnation point. I - Skin friction results

The response of a boundary layer in the stagnation region of a two-dimensional body to fluctuations in the freestream is examined. The analysis is restricted to laminar incompressible flow. The assumed form of the velocity distribution at the edge of the boundary layer represents both a pulsation of the incoming flow, and an oscillation of the stagnation point streamline. Both features are essential in accurately representing the effect which freestream spatial and temporal nonuniformities have upon the unsteady boundary layer. Finally, a simple model is proposed which relates the characteristic parameters in a turbulent wake to the unsteady boundary-layer edge velocity. Numerical results are presented for both an arbitrary two-dimensional geometry and a circular cylinder.

Wilson, Dennis E.↗
NASA NTRS1961

Unsteady Aerodynamic Forces on a Slender Body of Revolution in Supersonic Flow

Linearized slender-body theory is applied to the computation of aerodynamic forces on an oscillating, or deforming, body in supersonic flow. The undeformed body is a body of revolution and the deformed body is represented by movement of a line through the centers of the cross sections which are assumed to remain circular. The time dependence is based on sinusoidal motion. For a body of vanishing thickness the slender-body theory yields the apparent mass approximation as it is obtained for incompressible crossflow around a cylinder. Both linearized slender-body theory and the apparent mass approximation are used to calculate the pitching-moment coefficients on a rigid slender body with a parabolic arc nose cone, and these coefficients are compared with some experimental results.

Bond, Reuben↗
NASA NTRS1984

Large amplitude forcing of a high speed 2-dimensional jet

The effect of large amplitude forcing on the growth of a high speed two dimensional jet was investigated experimentally. Two forcing techniques were utilized: mass flow oscillations and a mechanical system. The mass flow oscillation tests were conducted at Strouhal numbers from 0.00052 to 0.045, and peak to peak amplitudes up to 50 percent of the mean exit velocity. The exit Mach number was varied in the range 0.15 to 0.8. The corresponding Reynolds numbers were 8,400 and 45,000. The results indicate no significant change of the jet growth rate or centerline velocity decay compared to the undisturbed free jet. The mechanical forcing system consists of two counter rotating hexagonal cylinders located parallel to the span of the nozzle. Forcing frequencies up to 1,500 Hz were tested. Both symmetric and antisymmetric forcing can be implemented. The results for antisymmetric forcing showed a significant (75 percent) increase of the jet growth rate at an exit Mach number of 0.25 and a Strouhal number of 0.019. At higher rotational speeds, the jet deflected laterally. A deflection angle of 39 deg with respect to the centerline was measured at the maximum rotational speed.

Bernal, L.↗