Search NASA⌕ Search

SEARCH · Search NASA

Results for “OSCILLATION FREQUENCY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Evaluation of crystal oscillators and frequency dividers for high temperature operation

Active and passive components of crystal oscillators and frequency dividers were tested to determine their performance at temperatures from 300 C to 350 C. The properties of GaAs JFETs were determined and their performance compared with that of silicon devices. Techniques for constructing breadboard circuits were assessed for operation in this temperature range. A Pierce oscillator and a multivibrator (Colorado crystal) oscillator were constructed and tested. Device failures are discussed.

Source record↗

Limits on coronal reflection using high-frequency solar oscillations

Acoustic waves in the Sun with frequencies above about 5.3 mHz can propagate in the chromosphere. We examine imaged solar intensity data for evidence of reflection of these waves in the upper chromosphere, where the temperature increases by a large factor over a short distance. Our method is to compare the observed and theoretically derived frequency spacings between peaks in the power spectrum. We find that our theoretical frequencies provide the best fit to the data when the reflection in the upper atmosphere is eliminated. In particular, the model of Kumar (1993b), which includes the source depth, and radiative damping, in the calculation of power spectra but ignores chromospheric reflection, gives peak frequencies that are in good agreement with the observations. For acoustic waves of frequency greater than 6 mHz we put an upper limit to the reflectivity of chromosphere and corona, using our method, of about 10%. At a given spherical harmonic degree, the frequency spacing between peaks in the data generally decreases with increasing frequency, because the lower turning point of the waves is moving inward. However, between 5 and 5.5 mHz the frequency spacing increases slightly. This feature is probably associated with the acoustic cutoff frequency in the solar atmosphere, i.e., it indicates a transition from trapped waves to propagating waves. We are able to reproduce the observed behavior by a crude modeling of the solar atmosphere. Further study of these peaks should provide an independent way of exploring the mean structure of the solar atmosphere, particularly around the temperature minimum region.

Kumar, P.↗

Measurements of high-frequency solar oscillation modes

The spatial-temporal spectrum of solar oscillations exhibits modelike structure at frequencies above the nominal photospheric acoustic cutoff of about 5.3 mHz. The linewidth and frequency of these features are measured as functions of degree from high-quality spectra obtained from observations made at the geographic South Pole. From 5.3 to 6.5 mHz the linewidths are relatively constant with a value of about 70 microHz, approximately one-half the frequency difference between modes of the same degree but successive values of radial order number. This width is larger than can be accounted for by simple considerations of the leakage of trapped acoustic waves. The frequencies of the high-frequency modes adhere to a simple dispersion law if one uses a substantially larger effective phase shift that applies at lower frequencies. The frequency variation of this phase shift changes markedly above the acoustic cutoff frequency.

Duvall, T. L., Jr.↗

High-Frequency Gated Oscillator

New gated oscillator generates bursts of high-frequency sine waves, square waves, and triangular waves in response to control signals. Each burst starts at zero phase, with tight tolerances on signal amplitude and frequency. Frequencies in megahertz range are made possible by using high-speed comparators and high-speed flip-flop as fast-response threshold detector.

Berard, C. A.↗

Computational Test Cases for a Clipped Delta Wing with Pitching and Trailing-Edge Control Surface Oscillations

Computational test cases have been selected from the data set for a clipped delta wing with a six-percent-thick circular-arc airfoil section that was tested in the NASA Langley Transonic Dynamics Tunnel. The test cases include parametric variation of static angle of attack, pitching oscillation frequency, trailing-edge control surface oscillation frequency, and Mach numbers from subsonic to low supersonic values. Tables and plots of the measured pressures are presented for each case. This report provides an early release of test cases that have been proposed for a document that supplements the cases presented in AGARD Report 702.

Bennett, Robert M.↗

Lift and moment coefficients expanded to the seventh power of frequency for oscillating rectangular wings in supersonic flow and applied to a specific flutter problem

Linearized theory for compressible unsteady flow is used to derive the velocity potential and lift and moment coefficients in the form of oscillating rectangular wing moving at a constant supersonic speed. Closed expressions for the velocity potential and lift and moment coefficients associated with pitching and translation are given to seventh power of the frequency. These expressions extend the range of usefulness of NACA report 1028 in which similar expressions were derived to the third power of the frequency of oscillation. For example, at a Mach number of 10/9 the expansion of the potential to the third power is an accurate representation of the potential for values of the reduced frequency only up to about 0.08; whereas the expansion of the potential to the seventh power is an accurate representation for values of the reduced frequency up to about 0.2. The section and total lift and moment coefficients are discussed with the aid of several figures. In addition, flutter speeds obtained in the Mach number range from 10/9 to 10/6 for a rectangular wing of aspect ratio 4.53 by using section coefficients derived on the basis of three-dimensional flow are compared with flutter speeds for this wing obtained by using coefficients derived on the basis of two-dimensional flow.

Nelson, Herbert C↗

Developing Antimatter Containment Technology: Modeling Charged Particle Oscillations in a Penning-Malmberg Trap

The NASA MSFC Propulsion Research Center (PRC) is conducting a research activity examining the storage of low energy antiprotons. The High Performance Antiproton Trap (HiPAT) is an electromagnetic system (Penning-Malmberg design) consisting of a 4 Tesla superconductor, a high voltage confinement electrode system, and an ultra high vacuum test section; designed with an ultimate goal of maintaining charged particles with a half-life of 18 days. Currently, this system is being experimentally evaluated using normal matter ions which are cheap to produce and relatively easy to handle and provide a good indication of overall trap behavior, with the exception of assessing annihilation losses. Computational particle-in-cell plasma modeling using the XOOPIC code is supplementing the experiments. Differing electrode voltage configurations are employed to contain charged particles, typically using flat, modified flat and harmonic potential wells. Ion cloud oscillation frequencies are obtained experimentally by amplification of signals induced on the electrodes by the particle motions. XOOPIC simulations show that for given electrode voltage configurations, the calculated charged particle oscillation frequencies are close to experimental measurements. As a two-dimensional axisymmetric code, XOOPIC cannot model azimuthal plasma variations, such as those induced by radio-frequency (RF) modulation of the central quadrupole electrode in experiments designed to enhance ion cloud containment. However, XOOPIC can model analytically varying electric potential boundary conditions and particle velocity initial conditions. Application of these conditions produces ion cloud axial and radial oscillation frequency modes of interest in achieving the goal of optimizing HiPAT for reliable containment of antiprotons.

Chakrabarti, S.↗

Transient Modeling of Hybrid Rocket Low Frequency Instabilities

A comprehensive dynamic model of a hybrid rocket has been developed in order to understand and predict the transient behavior including instabilities. A linearized version of the transient model predicted the low-frequency chamber pressure oscillations that are commonly observed in hybrids. The source of the instabilities is based on a complex coupling of thermal transients in the solid fuel, wall heat transfer blocking due to fuel regression rate and the transients in the boundary layer that forms on the fuel surface. The oscillation frequencies predicted by the linearized theory are in very good agreement with 43 motor test results obtained from the hybrid propulsion literature. The motor test results used in the comparison cover a very wide spectrum of parameters including: 1) four separate research and development programs, 2) three different oxidizers (LOX, GOX, N2O), 3) a wide range of motor dimensions (i.e. from 5 inch diameter to 72 inch diameter) and operating conditions and 4) several fuel formulations. A simple universal scaling formula for the frequency of the primary oscillation mode is suggested.

Karabeyoglu, M. Arif↗

Turbulent boundary layer separation over a rearward facing ramp and its control through mechanical excitation

A vane oscillating about a fixed point at the inlet to a two-dimensional 20 degree rearward facing ramp has proven effective in delaying the separation of a turbulent boundary layer. Measurements of the ramp surface static pressure coefficient obtained under the condition of vane oscillation and constant inlet velocity revealed that two different effects occurred with surface distance along the ramp. In the vicinity of the oscillating vane, the pressure coefficients varied as a negative function of the vane's trailing edge rms velocity; the independent variable on which the rms velocity depends are the vane's oscillation frequency and its displacement amplitude. From a point downstream of the vane to the exit of the ramp; however, the pressure coefficient varied as a more complex function of the two independent variables. That is, it was found to vary as a function of the vane's oscillation frequency throughout the entire range of frequencies covered during the test, but over only a limited range of the trailing edge displacement amplitudes covered. More specifically, the value of the pressure coefficient was independent of increases in the vane's displacement amplitude above approximately 35 inner wall units of the boundary layer. Below this specific amplitude it varied as a function of the vane's trailing edge rms velocity. This height is close to the upper limit of the buffer layer. A parametric study was made to determine the variation of the maximum static pressure recovery as a function of the vane's oscillation frequency, for several ramp inlet velocities and a constant displacement amplitude of the vane's trailing edge. The results indicate that the phenomenon producing the optimum delay of separation may be Strouhal number dependent. Corona anemometer measurements obtained in the inner wall regions of the boundary layer for the excited case reveal a large range of unsteadiness in the local velocities. These measurements imply the existence of inflections in the profiles, which provide a mechanism for resulting inviscid flow instabilities to produce turbulence in the near wall region, thereby delaying separation of the boundary layer.

Mckinzie, Daniel J., Jr.↗

Periodic oscillations observed in swirling flows with and without combustion

Data obtained by laser induced Rayleigh scattering and hot-wire anemometry are used to study periodic oscillations in swirling flows with and without combustion present. Power spectral density functions reveal the presence of energetic, periodic oscillations in the flow. A band of low frequency oscillations (25-100 Hz) is observed on and near the centerline in the presence of a recirculation zone and is attributed to axial oscillations of the recirculation zone which are amplified with combustion by an interaction between the mechanism for flow recirculation and flow changes induced by combustion. High frequency oscillations between 300-500 Hz are observed in an annular region located in the vortex core. A stability analysis is performed, and it is concluded that these oscillations are most likely helical waves resulting from hydrodynamic instability in the vortex core upstream of the test section.

Gouldin, F. C.↗

Voltage tunable differential heterodyne spectroscopy in the far-infrared with Josephson junctions

The basic methods of differential heterodyne spectroscopy with Josephson junctions are described. A technique is outlined for bridging the gap between a local oscillator frequency and a signal frequency through the use of a voltage-tunable internal oscillation frequency in a Josephson junction structure. It is shown that an intermediate frequency can be converted to a conveniently low frequency by double frequency conversion carried out directly in a Josephson junction. The expected conversion efficiency is estimated qualitatively. Experiments are discussed in which the differential heterodyne frequency-conversion technique was demonstrated at a wavelength of 0.4 mm and a voltage-tunable oscillation in a double Josephson junction structure was observed, with oscillation line widths as narrow as 0.5 Hz, for a resistance of 3.3 nanohms and an estimated inductance of the order of 1 nH.

Ulrich, B. T.↗

Spreading of thermonuclear flames on the neutron star in SAX J1808.4-3658: an observational tool

We analyse archival Rossi X-Ray Timing Explorer (RXTE) proportional counter array (PCA) data of thermonuclear X-ray bursts from the 2002 outburst of the accreting millisecond pulsar SAX 51808.4-3658. We present evidence of a complex frequency modulation of oscillations during burst rise, and correlations among the time evolution of the oscillation frequency, amplitude, and the inferred burning region area. We discuss these findings in the context of a model, based on thermonuclear flame spreading on the neutron star surface, that can qualitatively explain these features. From our model, we infer that for the 2002 Oct. 15 thermonuclear burst, the ignition likely occurred in the mid-latitudes, the burning region took approx. 0.2 s to nearly encircle the equatorial region of the neutron star, and after that the lower amplitude oscillation originated from the remaining asymmetry of the burning front in the same hemisphere where the burst ignited. We emphasize that studies of the evolution of burst oscillation properties during burst rise can provide a powerful tool to understand thermonuclear flame spreading on neutron star surfaces under extreme physical conditions.

Bhattacharyya, Sudip↗

Minicomputer-controlled frequency generator

Extremely-accurate and low-phase-noise frequency generator varies oscillator frequency as predetermined function of time. System could be used: (a) to automatically vary transmission frequencies in accordance with seasonal and diurnal changes in ionospheric conditions, (b) as automatic tuner for heterodyne receivers, or (c) as control element for phase-locked telemetry receivers.

Winkelstein, R. A.↗

Improving FM transmitter power and efficiency

Amplifier tracks oscillator frequency allowing narrow band high Q circuit to be used, increasing wide deviation FM transmission efficiency and power output, and suppressing spurious output frequencies system. Tracking oscillator and amplifier act like wideband circuitry with narrow-band advantages.

Honnell, M. A.↗