Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optical Isolator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Design and Construction of a High-Resolution Hodoscope for the GlueX Experiment with High-Statistics Analysis of the p0, ¿, and ¿1 Photoproduction Cross Sections from the RadPhi Experiment

Differential cross sections for forward-angle photoproduction of p0, ¿, and ¿ 1 pseudoscalar mesons were measured using data from the RadPhi experiment conducted in Hall B at Jef ferson Lab. RadPhi utilized a tagged bremsstrahlung photon beam incident on a stationary 9Be target, with a detector system configured to trigger on a recoil proton in coincidence with multiple neutral showers in the calorimeter. Events were reconstructed and subjected to kinematic constraints, with background suppressed via sideband subtraction guided by Monte Carlo modeling of background contributions. Cross sections were extracted over the photon energy range 4.4– 5.4 GeV and binned in invariant momentum transfer t, providing measurements from one of the first high-statistics experiments of forward ¿ and ¿1 pro duction from a nuclear target at these energies. Acceptance corrections were applied using a detailed GEANT-based simulation of the detector geometry and response. The resulting cross sections are consistent with 2020 CLAS results, when scaled by the number of protons in beryllium, and show broad agreement with other data and theoretical models. In parallel, a high-resolution photon tagger detector, the Tagger Microscope (TAGM), was designed, constructed, and commissioned for the GlueX experiment in Hall D at Jefferson Lab. The TAGM was developed to provide high-rate tagging capability in the coherent bremsstrahlung peak by detecting post-bremsstrahlung electrons across a one GeV range along the focal plane of the tagging spectrometer. The detector consists of a 5ˆ102 array of 2ˆ2 mm2 square BCF-20 plastic scintillating fibers thermally fused to BCF-98 light guide fibers optically coupled to silicon photomultipliers. These fibers are mounted in a precision machined framework enabling fine positional adjustments to maintain precise alignment with post-bremsstrahlung electron trajectories, while ensuring mechanical rigidity, thermal stability, optical isolation, minimal inactive area, and radiation shielding for electronics. The construction effort involved extensive testing of fiber quality, light transmission, thermal fusing, radiation hardness, and defect analysis using SEM and EDX techniques. Following its installation and commissioning, the TAGM became a critical component of the GlueX beamline, enabling high-rate tagging essential for studies of hybrid mesons and gluonic ex citations.

McIntyre, James [Univ. of Connecticut, Storrs, CT ↗

Optical microresonator device with thermal isolation

A thermal microring optical sensor is configured such that a portion of the optical resonator and its associated waveguide are encased within a cladding structure to minimize scattering losses along the waveguide and also provide improved evanescent coupling efficiency between the waveguide and the resonator. Functioning as a thermal sensor, incoming radiation modifies the temperature of the resonator, which changes its resonant frequency and, as a result, the percentage of light that it evanescently couples from the waveguide. The cladding structure also functions as a mechanical support for the resonator disk, eliminating the need for a pedestal to suspend the disk above the support substrate. Thermally-induced buckling of the optical waveguide is also reduced by encasing the susceptible portion of the waveguiding within the cladding structure.

Shaw, Michael J.↗

Design, analysis, and test verification of advanced encapsulation systems

Thermal, optical, structural, and electrical isolation analyses are decribed. Major factors in the design of terrestrial photovoltaic modules are discussed. Mechanical defects in the different layers of an encapsulation system, it was found, would strongly influence the minimum pottant thickness required for electrical isolation. Structural, optical, and electrical properties, a literature survey indicated, are hevily influenced by the presence of moisture. These items, identified as technology voids, are discussed. Analyses were based upon a 1.2 meter square module using 10.2 cm (4-inch) square cells placed 1.3 mm apart as shown in Figure 2-2. Sizing of the structural support member of a module was determined for a uniform, normal pressure load of 50 psf, corresponding to the pressure difference generated between the front and back surface of a module by a 100 mph wind. Thermal and optical calculations were performed for a wind velocity of 1 meter/sec parallel to the ground and for module tilt (relative to the local horizontal) of 37 deg. Placement of a module in a typical array field is illustrated.

Garcia, A.↗

A circadian rhythm in optic nerve impulses from an isolated eye in darkness.

Study of the circadian rhythm of optic nerve potentials recorded from the isolated eye of the sea hare Aplysia. The optic nerve activity in constant conditions is found to be clearly circadian and to obey the circadian rule for diurnal animals. In addition, the period length depends on the in vitro culturing solution. In seawater it is about 22 hr, but in culture medium it is 27 hr. The rhythm can be completely phase-shifted in one trial if the phase of the LD 12:12 Zeitgeber is advanced or delayed 4 hr. The rhythm in one eye can be phase-shifted in vivo independently of the other eye and in vitro independently of the rest of the animal. Thus, in the animal, the eye oscillators are, at most, only slightly influenced by each other or by other oscillators in the animal.

Jacklet, J. W.↗

A comprehensive examination of the optical morphologies of 719 isolated galaxies in the AMIGA sample

Abstract Using images from Sloan Digital Sky Survey Data Release 8, we have re-examined the morphology of 719 galaxies from the Analysis of the interstellar Medium in Isolated GAlaxies (AMIGA) project, a sample consisting of the most isolated galaxies that have yet been identified. The goal is to further improve the classifications of these galaxies by examining them in the context of the Comprehensive de Vaucouleurs revised Hubble-Sandage (CVRHS) system, which includes recognition of features that go beyond the original de Vaucouleurs point of view. Our results confirm previous findings that isolated galaxies are found across the complete revised Hubble sequence, with intermediate- to late-type (Sb-Sc) spirals being relatively more common. Elmegreen Arm Classifications are also presented, and show that more than 50 per cent of the 514 spirals in the sample for which an arm class (AC) could be judged are grand design (AC 8,9,12). The visual bar fraction for the sample is ≈50 per cent, but only 16 per cent are classified as strongly barred (SB). The dominant family classification is SA (non-barred), the dominant inner variety classification is (s) (pure spiral), and the dominant outer variety classification is no outer ring, pseudo-ring, or lens. The Kolmogorov–Smirnov test is used to check for potential biases in the morphological interpretations, and for any possible relation between rings, bars, and ACs with local environment and far-infrared excess. The connection between morphology and stellar mass is also examined for a subset of the sample.

Buta, Ronald J.↗

Optical shutter for use in shock tubes

Thin metal shutter that is forced into angled optical slit isolates spectrograph from high speed shock tube both optically and mechanically so neither radiation nor particulate material enters spectrograph.

Mcclenahan, J. O.↗

Design principles for contamination abatement in scientific satellites.

It is shown that deposition of contamination films on satellite optics can be controlled by the following means: isolating critical optical surfaces from the rest of the spacecraft; avoiding or minimizing the use of nonmetallic material, particularly near or in line of sight of optical surfaces; avoiding materials with high vapor pressures; subjecting materials to vacuum baking prior to use, to drive off the volatile outgassing products; keeping the critical surfaces at temperatures above the ambient; avoiding elevated operational temperatures for nonmetallic materials; paying special attention to optics exposed to intense UV-, X-ray, or particular radiation; avoiding water-vapor sources; and directing RCS plumes away from critical surfaces. Methods of controlling particulate contaminants are also proposed.

Naumann, R. J.↗

Ventricular filling slows epicardial conduction and increases action potential duration in an optical mapping study of the isolated rabbit heart

INTRODUCTION: Mechanical stimulation can induce electrophysiologic changes in cardiac myocytes, but how mechanoelectric feedback in the intact heart affects action potential propagation remains unclear. METHODS AND RESULTS: Changes in action potential propagation and repolarization with increased left ventricular end-diastolic pressure from 0 to 30 mmHg were investigated using optical mapping in isolated perfused rabbit hearts. With respect to 0 mmHg, epicardial strain at 30 mmHg in the anterior left ventricle averaged 0.040 +/- 0.004 in the muscle fiber direction and 0.032 +/- 0.006 in the cross-fiber direction. An increase in ventricular loading increased average epicardial activation time by 25%+/- 3% (P < 0.0001) and correspondingly decreased average apparent surface conduction velocity by 16%+/- 7% (P = 0.007). Ventricular loading did not significantly alter action potential duration at 20% repolarization (APD20) but did at 80% repolarization (APD80), from 179 +/- 7 msec to 207 +/- 5 msec (P < 0.0001). The dispersion of APD20 was decreased with loading from 19 +/- 2 msec to 13 +/- 2 msec (P = 0.024), whereas the dispersion of APD80 was not significantly changed. These electrophysiologic changes with ventricular loading were not affected by the nonspecific stretch-activated channel blocker streptomycin (200 microM) and were not attributable to changes in myocardial perfusion or the presence of an electromechanical decoupling agent (butanedione monoxime) during optical mapping. CONCLUSION: Acute loading of the left ventricle of the isolated rabbit heart decreased apparent epicardial conduction velocity and increased action potential duration by a load-dependent mechanism that may not involve stretch-activated channels.

NASA Program Biomedical Research and Countermeasur↗

Far-infrared emission in single and binary galaxies

The properties of the far-IR emission from a sample of optically selected isolated galaxies is studied using data obtained by the Infrared Astronomical Satellite (IRAS). This set of galaxies is used as a standard of comparison representing galaxies whose far-IR properties have been little influenced by interaction with their surroundings. An optically selected sample of isolated binary galaxies is then considered. For the binary galaxies, no extreme highly luminous IR emitters are found, reaffirming the rarity of these objects. However, the occurrence of some low-level enhancement of infrared activity is substantiated by the comparison of far-IR emission in single galaxies and those found to have nearby companions. This effect may be influenced by the occurrence of a few instances of more luminous galaxies. Indeed, many galaxies that show evidence for interaction, i.e., distortion, tails, etc., do not show enhanced IR emission.

Haynes, Martha P.↗

BVRI SURFACE PHOTOMETRY OF ISOLATED GALAXY TRIPLETS

Optical broadband BVRI observations of 54 galaxies selected from the Catalog of Isolated Triplets of Galaxies in the Northern Hemisphere have been carried out at San Pedro Martir National Observatory to evaluate their photometric and morphological properties. We complement our analysis with Two-Micron All Sky Survey (2MASS) and Sloan Digital Sky Survey (SDSS) images and look for signatures likely related to interactions/mergers. We report apparent/absolute BVRI magnitudes and colors for the 54 galaxies. The membership of these galaxies is re-evaluated by imposing a reasonable condition of concordant redshifts upon the original selection criteria, rendering a final sample of 34 galaxies in 13 triplets, 12 galaxies in close pairs, and 8 galaxy outliers. The triplets are spiral-dominated systems in different dynamical stages from loosely interacting to almost merged objects. The incidence fraction of features likely associated with interactions is {approx}56%, similar to those found in northern and southern compact groups. The average fraction of bars is 35% with a mean value of maximum bar ellipticity {epsilon}{sub max} {approx} 0.4. Bars are hosted in the late-type triplet spirals, almost twice more than in early-type spirals. The global fraction of rings is 20%, all in the late-type components. The overdensity of triplets with respect to the background and their current dynamical status, as devised from our estimate of their dynamical parameters, namely the harmonic radius R{sub H} , velocity dispersion {sigma}, dimensionless crossing time H{sub 0{tau}c}, and virial mass M{sub V} , appear to be sufficient to favor galaxy transformations similar to those seen in dense groups and clusters. By contrast, the lower fraction of bonafide ellipticals and the relatively higher fraction of late-type spirals make these triplets essentially different from the Hickson Compact Groups and more representative of the field. A modest 1.6 enhancement factor in the optical luminosity of the late-type triplet components relative to an isolated galaxy control sample is also interpreted as consistent with interactions in physically bounded aggregates. Our results lead us to suggest that non-negligible populations of physical triplets might be found in complete and well-observed samples. We provide individual mosaics for the 54 galaxies containing (1) logarithmic-scaled R-band images, (2) R-band sharp/filtered images, (3) (B - I) color index maps, (4) RGB images from the SDSS database, (5) co-added J + H + K images generated from the 2MASS archives that were also sharp/filtered, and (6) {epsilon}, position angle radial profiles from a surface photometry analysis of (a) the R band and (b) the co-added near-infrared images, all used for the present analysis.

79 ASTRONOMY AND ASTROPHYSICS↗

Simplified Lasercom System Architecture Using a Disturbance-Free Platform

A simplified laser communications (lasercom) system architecture, primarily for a deep-space flight transceivers, can be realized by decoupling the lasercom optical components from the host spacecraft using a disturbance-free platform (DFP) developed by Lockheed Martin Space System Company. Unlike conventional lasercom system architectures where a high bandwidth control loop is used to stabilize the optical line-of-sight in the presence of platform disturbance, the DFP package isolates the optical train from the high frequency platform jitter produced by the host. By preventing the vibration from coupling into the optics train, the need for a high bandwidth beam stabilization control loop (including fast steering mirror, detectors, controls and the associated relay optics) is eliminated with possible mass savings.

deep space↗