SEARCH · Search NASA

Results for “Oscillatory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Further developments in the prediction of oscillatory aerodynamics in mixed transonic flow

This paper presents improvements made to the oscillatory transonic aerodynamic kernel function method given in AIAA Paper No. 74-359. The improved method is fully developed for flows with continuously varying local Mach number and oscillating normal shocks. The boundary conditions developed for oscillating shocks require that a line doublet be added at the foot of the shock which represents the loads induced by shock movement. Numerical results show good agreement with experiment and significant deviation from linear aerodynamic theory. The method is also used to predict wind-tunnel wall interference effects.-

Cunningham, A. M., Jr.↗

NASA NTRS1976

Some observations on the oscillatory behavior of carbon monoxide oxidation

The oscillatory behavior of the oxidation of carbon monoxide was experimentally studied in an attempt to further elucidate the reaction at low pressure. The phenomenon is observed as multiple explosions and involves successive flashes of light accompanying the slow reaction in a static system, including over 450 flashes in one case. Electronically excited hydroxyl radicals (water impurity) and carbon dioxide have been identified as components of the emission. The phase difference between the two was seen to be negligible. The nature of the temperature and pressure changes during a cycle indicates that the oscillation is purely kinetic rather than thermokinetic. A procedure is presented whereby sustained oscillations can be obtained for particular regions in the pressure-temperature plane, vessel surface pretreatments, and H2O-containing reactants.

Mccaffrey, B. J.↗

NASA NTRS1978

Steady, Oscillatory and Unsteady, Subsonic and Supersonic Aerodynamics (SOUSSA) for complex aircraft configurations

The Green's function method and the computer program SOUSSA (Steady Oscillatory and Unsteady Subsonic and Supersonic Aerodynamics) are reviewed. The Green's function method is applied to the fully unsteady potential equation yielding an integro-differential-delay equation. This equation is approximated by a set of differential-delay equations in time using the finite element method. The Laplace transform is used to yield a matrix relating the velocity potential to the normal wash. The matrix of the generalized aerodynamic forces is obtained by premultiplying and postmultiplying the matrices relating generalized forces to the potential and the normal wash by the generalized coordinates. The program SOUSSA is compared with existing numerical results. Results indicate that the program is not only general, flexible, and easy to use, but also accurate and fast.

Morino, L.↗

NASA NTRS1978

Laser velocimeter application to oscillatory liquid flows

A laser velocimeter technique was used to measure the mean velocity and the frequency characteristics of an oscillatory flow component generated with a rotating flapper in liquid flow system at Reynolds numbers approximating 93,000. The velocity information was processed in the frequency domain using a tracker whose output was used to determine the flow spectrum. This was accomplished with the use of an autocorrelator/Fourier transform analyzer and a spectrum averaging analyzer where induced flow oscillations up to 40 Hz were detected. Tests were conducted at a mean flow velocity of approximately 2 m/s. The experimental results show that the laser velocimeter can provide quantitative information such as liquid flow velocity and frequency spectrum with a possible application to cryogenic fluid flows.

Gartrell, L. R.↗

NASA NTRS1980

Steady, Oscillatory, and Unsteady Subsonic and Supersonic Aerodynamics, production version (SOUSSA-P 1.1). Volume 1: Theoretical manual

Recent developments of the Green's function method and the computer program SOUSSA (Steady, Oscillatory, and Unsteady Subsonic and Supersonic Aerodynamics) are reviewed and summarized. Applying the Green's function method to the fully unsteady (transient) potential equation yields an integro-differential-delay equation. With spatial discretization by the finite-element method, this equation is approximated by a set of differential-delay equations in time. Time solution by Laplace transform yields a matrix relating the velocity potential to the normal wash. Premultiplying and postmultiplying by the matrices relating generalized forces to the potential and the normal wash to the generalized coordinates one obtains the matrix of the generalized aerodynamic forces. The frequency and mode-shape dependence of this matrix makes the program SOUSSA useful for multiple frequency and repeated mode-shape evaluations.

Morino, L.↗

NASA NTRS1979

Measurement of dynamic direct and cross-coupling derivatives due to oscillatory roll

An oscillatory roll apparatus is described with which the complete set of moment and force derivatives due to an oscillation in roll can be obtained in a wind tunnel. A newly developed technique to reduce the dynamic data originating from the four-component balance used with the above apparatus is briefly presented. The technique is intended to account for the dynamic behavior of the model-balance subsystem in the presence of motions in the various degrees of freedom allowed by the balance webs. Finally, results obtained from both dynamic calibration as well as wind-tunnel tests are shown.

Hanff, E. S.↗

NASA NTRS1981

Curved-flow, rolling-flow, and oscillatory pure-yawing wind-tunnel test methods for determination of dynamic stability derivatives

The test capabilities of the Stability Wind Tunnel of the Virginia Polytechnic Institute and State University are described, and calibrations for curved and rolling flow techniques are given. Oscillatory snaking tests to determine pure yawing derivatives are considered. Representative aerodynamic data obtained for a current fighter configuration using the curved and rolling flow techniques are presented. The application of dynamic derivatives obtained in such tests to the analysis of airplane motions in general, and to high angle of attack flight conditions in particular, is discussed.

Chambers, J. R.↗

NASA NTRS1981

Curved-flow, rolling-flow, and oscillatory pure-yawing wind-tunnel test methods for determination of dynamic stability derivatives

Dynamic stability derivatives are evaluated on the basis of rolling-flow, curved-flow and snaking tests. Attention is given to the hardware associated with curved-flow, rolling-flow and oscillatory pure-yawing wind-tunnel tests. It is found that the snaking technique, when combined with linear- and forced-oscillation methods, yields an important method for evaluating beta derivatives for current configurations at high angles of attack. Since the rolling flow model is fixed during testing, forced oscillations may be imparted to the model, permitting the measurement of damping and cross-derivatives. These results, when coupled with basic rolling-flow or rotary-balance data, yield a highly accurate mathematical model for studies of incipient spin and spin entry.

Chambers, J. R.↗

NASA NTRS1982

Steady, Oscillatory, and Unsteady Subsonic and Supersonic Aerodynamics

Computer program SOUSSA-P (Steady, Oscillatory, and Unsteady Subsonic and Supersonic Aerodynamics--Production Version) accurately and efficiently evaluates steady and unsteady aerodynamic loads on aircraft having arbitrary shapes and motions, including structural deformations.

Desmarais, R. N.↗

NASA NTRS1985

Analysis of an oscillatory oil squeeze film containing a central gas bubble

A squeeze-film damper, consisting of two circular plates, having only normal oscillatory relative motion is considered. The liquid lubricant between the plates is assumed to contain a single central gas bubble. The effect of the bubble on the damper performance is analyzed. Comparison is made with the performance of a pure liquid damper. Substantial deviations in peak dynamic pressures are predicted which explain discrepancies between experimental and theoretical results reported in the literature.

Haber, S.↗

NASA NTRS1986

Wave propagation in anisotropic medium due to an oscillatory point source with application to unidirectional composites

The far-field displacements in an infinite transversely isotropic elastic medium subjected to an oscillatory concentrated force are derived. The concepts of velocity surface, slowness surface and wave surface are used to describe the geometry of the wave propagation process. It is shown that the decay of the wave amplitudes depends not only on the distance from the source (as in isotropic media) but also depends on the direction of the point of interest from the source. As an example, the displacement field is computed for a laboratory fabricated unidirectional fiberglass epoxy composite. The solution for the displacements is expressed as an amplitude distribution and is presented in polar diagrams. This analysis has potential usefulness in the acoustic emission (AE) and ultrasonic nondestructive evaluation of composite materials. For example, the transient localized disturbances which are generally associated with AE sources can be modeled via this analysis. In which case, knowledge of the displacement field which arrives at a receiving transducer allows inferences regarding the strength and orientation of the source, and consequently perhaps the degree of damage within the composite.

Williams, J. H., Jr.↗

NASA NTRS1985

Oscillatory thermocapillary flows

Experimental and theoretical research conducted to understand the physical mechanism of oscillatory thermocapillary convection is discussed. A physical model that plausibly describes the cause of thermocapillary flow oscillations and to yield the proper parameters for identifying their onset is considered. Strong convection indicated by a large Marangoni number, as well as free surface deformation, appear to be important factors for the onset of the convection.

Ostrach, S.↗

NASA NTRS1987

Efficient implementation of essentially non-oscillatory shock capturing schemes

In the computation of discontinuous solutions of hyperbolic conservation laws, TVD (total-variation-diminishing), TVB (total-variation-bounded) and the recently developed ENO (essentially non-oscillatory) schemes have proven to be very useful. In this paper two improvements are discussed: a simple TVD Runge-Kutta type time discretization, and an ENO construction procedure based on fluxes rather than on cell averages. These improvements simplify the schemes considerably -- especially for multi-dimensional problems or problems with forcing terms. Preliminary numerical results are also given.

Shu, Chi-Wang↗

NASA NTRS1988

Efficient implementation of essentially non-oscillatory shock capturing schemes, 2

Earlier work on the efficient implementation of ENO (essentially non-oscillatory) shock capturing schemes is continued. A new simplified expression is provided for the ENO construction procedure based again on numerical fluxes rather than cell averages. Also considered are two improvements which are labeled ENO-LLF (local Lax-Friedrichs) and ENO-Roe, which yield sharper shock transitions, improved overall efficiency, and lower computational cost than previous implementation of the ENO schemes. Two methods of sharpening contact discontinuities, i.e., the subcell resolution idea of Harten and the artificial compression idea of Yang, which those authors used originally in the cell-average framework, are supplied to the current ENO schemes using numerical fluxes and TVD Runge-Kutta time discretizations. The implementation for nonlinear systems and multi-dimensions is given. Finally, many numerical examples, including a compressible shock turbulence interaction flow calculation, are given.

Shu, Chi-Wang↗

NASA NTRS1988

Non-oscillatory spectral Fourier methods for shock wave calculations

A non-oscillatory spectral Fourier method is presented for the solution of hyperbolic partial differential equations. The method is based on adding a nonsmooth function to the trigonometric polynomials which are the usual basis functions for the Fourier method. The high accuracy away from the shock is enhanced by using filters. Numerical results confirm that no oscillations develop in the solution. Also, the accuracy of the spectral solution of the inviscid Burgers equation is shown to be higher than a fixed order.

Cai, Wei↗

NASA NTRS1988

Efficient implementation of essentially non-oscillatory shock-capturing schemes

In the computation of discontinuous solutions of hyperbolic conservation laws, TVD (total-variation-diminishing), TVB (total-variation-bounded) and the recently developed ENO (essentially non-oscillatory) schemes have proven to be very useful. In this paper two improvements are discussed: a simple TVD Runge-Kutta type time discretization, and an ENO construction procedure based on fluxes rather than on cell averages. These improvements simplify the schemes considerably - especially for multi-dimensional problems or problems with forcing terms. Preliminary numerical results are also given.

Shu, Chi-Wang↗

NASA NTRS1989

Solution of the hydrodynamic device model using high-order non-oscillatory shock capturing algorithms

A micron n+ - n - n+ silicon diode is simulated via the hydrodynamic model for carrier transport. The numerical algorithms employed are for the non-steady case, and a limiting process is used to reach steady state. The simulation employs shock capturing algorithms, and indeed shocks, or very rapid transition regimes, are observed in the transient case for the coupled system, consisting of the potential equation and the conservation equations describing charge, momentum, and energy transfer for the electron carriers. These algorithms, termed essentially non-oscillatory, were successfully applied in other contexts to model the flow in gas dynamics, magnetohydrodynamics, and other physical situations involving the conservation laws in fluid mechanics. The method here is first order in time, but the use of small time steps allows for good accuracy. Runge-Kutta methods allow one to achieve higher accuracy in time if desired. The spatial accuracy is of high order in regions of smoothness.

Fatemi, Emad↗

NASA NTRS1990

Measuring Response Of Propellant To Oscillatory Heat Flux

Apparatus for research in combustion of solid propellants measures oscillatory response of rate of burning to oscillating thermal radiation from modulated CO2 laser. Determines response to rate of burning to equivalent oscillation in pressure. Rod of propellant mounted in burner assembly including waveguide at one end and infrared window at other end. Microwave Doppler velocimeter measures motion of combustion front. Microwave, laser-current, and heat-flux signals processed into and recorded in forms useful in determining desired response of propellent.

Strand, Leon D.↗