Search NASA⌕ Search

SEARCH · Search NASA

Results for “Oxygen surface exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Highly Durable and Active Pt/Sb-Doped SnO 2 Oxygen Reduction Reaction Electrocatalysts Produced by Atomic Layer Deposition

Platinum supported on mixed-metal oxides (MMOs) are a class of active and durable cathode catalysts for proton exchange membrane fuel cell (PEMFC) due to a combination of the high oxidative stability of the supports and strong-metal-support interactions (SMSI) that enable them to exceed the activity of Pt/C. Herein, we solve a significant remaining challenge with Pt/MMO systems, namely the relatively low surface area and porosity. This is achieved by dispersing nearly-uniform Pt clusters using atomic layer deposition (ALD) on highly conductive (6.2 S/cm) and stable antimony doped tin dioxide (ATO) support. ALD-Pt/ATO exhibited significantly higher electrochemically active surface area (ECSA) (74 m 2 /g) and oxygen reduction reaction (ORR) catalytic activity (102 mA/mg Pt at 0.9 V vs. RHE) compared to Pt/ATO synthesized using ethylene glycol (ECSA=31 m 2 /g Pt , mass activity=52 mA/mg Pt at 0.9 V vs. RHE) and formic acid reduction methods (ECSA=28 m 2 /g Pt , mass activity=46 mA/mg Pt at 0.9 V vs. RHE). Further characterization showed that wet chemical methods resulted in poorer Pt particle dispersion, poor control over Pt particle size distribution and chemical degradation of the support (during Pt deposition). Given the near-ideal Pt particle size distribution of the ALD-Pt/ATO, particle size growth and loss of ECSA was found to be minimal over the course of rigorous potential cycling. Thus, after 10,000 potential cycles between 1V and 1.5V vs. RHE, ALD-Pt/ATO and other Pt/ATOs were found to retain 100% of their initial ECSA compared to 57.6% retention for Pt/C. Upon testing in a H 2 /air PEMFC, following 1,000 potential cycles, the change in ALD-Pt/ATO performance was negligible while Pt/C exhibited a 68.2% loss of initial peak power density. Thus, ALD-Pt/ATO is an active and highly durable ORR electrocatalyst in PEMFCs under start-up-shut down conditions.

25 ENERGY STORAGE↗
DOE OSTI2025

Tantalum-stabilized ruthenium oxide electrocatalysts for industrial water electrolysis

The iridium oxide (IrO 2 ) catalyst for the oxygen evolution reaction used industrially (in proton exchange membrane water electrolyzers) is scarce and costly. Although ruthenium oxide (RuO 2 ) is a promising alternative, its poor stability has hindered practical application. Here, we used well-defined extended surface models to identify that RuO 2 undergoes structure-dependent corrosion that causes Ru dissolution. Tantalum (Ta) doping effectively stabilized RuO 2 against such corrosion and enhanced the intrinsic activity of RuO 2 . In an industrial demonstration, Ta-RuO 2 electrocatalyst exhibited stability near that of IrO 2 and had a performance decay rate of ~14 microvolts per hour in a 2800-hour test. At current densities of 1 ampere per square centimeter, it had an overpotential 330 millivolts less than that of IrO 2 .

Zhang, Jiahao [Sichuan Univ., Chengdu (China); Uni↗
DOE OSTI2026

Data for Rod et al., "Alternating salt and freshwater floods of coastal soils impact soil structure, hydraulic properties, and oxygen dynamics"

This dataset includes laboratory experiment data on soil structure, hydraulic properties, and oxygen dynamics associated with Rod et al. 2026 https://doi.org/10.1002/vzj2.70073. There are six data files from a lab-based flood simulation of either freshwater (FW) or alternating brackish saltwater (SW) and FW using soil cores from a coastal forest at the Smithsonian Environmental Research Center. For soil information please see the Location section of the metadata. Files include: CO2, surface chemistry, water retention, dissolved oxygen, and soil specific surface area. Each file is in CSV format and can be opened/read with any plain text tabular file reader (Microsoft Excel, R, etc.). Purpose of Experiment: To investigate how hydrologic intensification affects soil structure and oxygen dynamics, we conducted a series of laboratory-based flood simulations. After three SW-FW floods (6 floods total) there were significant changes in pore size distribution, significant redistribution of colloids, and the A-horizon became sodic. We concluded that a small number of SW flooding events can induce a measurable change in soil physical properties that directly impacts the biogeochemical dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

An Unbalanced Battle in Excellence: Revealing Effect of Ni/Co Occupancy on Water Splitting and Oxygen Reduction Reactions in Triple–Conducting Oxides for Protonic Ceramic Electrochemical Cells

Porous electrodes that conduct electrons, protons, and oxygen ions with dramatically expanded catalytic active sites can replace conventional electrodes with sluggish kinetics in protonic ceramic electrochemical cells. In this work, a strategy is utilized to promote triple conduction by facilitating proton conduction in praseodymium cobaltite perovskite through engineering non-equivalent B-site Ni/Co occupancy. Surface infrared spectroscopy is used to study the dehydration behavior, which proves the existence of protons in the perovskite lattice. The proton mobility and proton stability are investigated by hydrogen/deuterium (H/D) isotope exchange and temperature-programmed desorption. It is observed that the increased nickel replacement on the B-site has a positive impact on proton defect stability, catalytic activity, and electrochemical performance. This doping strategy is demonstrated to be a promising pathway to increase catalytic activity toward the oxygen reduction and water splitting reactions. The chosen PrNi 0.7 Co 0.3 O 3–δ oxygen electrode demonstrates excellent full-cell performance with high electrolysis current density of –1.48 A cm –2 at 1.3 V and a peak fuel-cell power density of 0.95 W cm –2 at 600 °C and also enables lower-temperature operations down to 350 °C, and superior long-term durability.

08 HYDROGEN↗
DOE OSTI2024

Gas Transfer Across Air‐Water Interfaces in Inland Waters: From Micro‐Eddies to Super‐Statistics

In inland water covering lakes, reservoirs, and ponds, the gas exchange of slightly soluble gases such as carbon dioxide, dimethyl sulfide, methane, or oxygen across a clean and nearly flat air‐water interface is routinely described using a water‐side mean gas transfer velocity $\overline{k_{L}}$, where overline indicates time or ensemble averaging. The micro‐eddy surface renewal model predicts $\overline{k_{L}}$ = α o Sc -1/2 ($v\bar{ϵ}$) 1/4 , where Sc is the molecular Schmidt number, $v$ is the water kinematic viscosity, and $\bar{ϵ}$ is the waterside mean turbulent kinetic energy dissipation rate at or near the interface. While α o = 0.39 - 0.46 has been reported across a number of data sets, others report large scatter or variability around this value range. It is shown here that this scatter can be partly explained by high temporal variability in instantaneous ϵ around $\bar{ϵ}$, a mechanism that was not previously considered. As the coefficient of variation (CV e ) in ϵ increases, α o must be adjusted by a multiplier (1 = CV e 2 ) -3/32 that was derived from a log‐normal model for the probability density function of ϵ. Reported variations in α o with a macro‐scale Reynolds number can also be partly attributed to intermittency effects in ϵ. Such intermittency is characterized by the long‐range (i.e., power‐law decay) spatial auto‐correlation function of ϵ. That α o varies with a macro‐scale Reynolds number does not necessarily violate the micro‐eddy model. Instead, it points to a coordination between the macro‐ and micro‐scales arising from the transfer of energy across scales in the energy cascade.

Batchelor scale↗
DOE OSTI2023

Topological Bismuth (1 1̅ 0) Facet for Efficient Oxygen Reduction Cathode in Fuel Cells

The performance of proton-exchange membrane fuel cells is strongly dependent on the efficiency of the electrochemical oxygen reduction reaction (ORR). Here, we report both two-dimensional (4 monolayer, ML) and three-dimensional Bi (16 ML) (11̅0) facets deliver a strong correlation between nontrivial topological surface states and low electrochemical overpotential toward ORR. Both topological Bi (11̅0) film and slab have two slightly gapped (9–45 meV) Dirac cones with the invariant Z 2 =1, derived from the parity products for the occupied states at four time-reversal invariant momentum points. By contrast, the Bi (110) film is stabilized as an ordinary insulator due to atomic buckling. The much lower thermodynamic ORR overpotential (η = 0.58 V) and higher H 2 O selectivity by four steps of H + /e – transfer are obtained on the topological Bi (11̅0) surface compared with the nontopological (110) facet (η = 0.84 V). This promotional effect can be attributed to the accumulation of topological surface bands (Bi 6p orbitals) near the Fermi energy, which provide stronger electronic transport channels along the surface Bi–Bi and Bi–O bonds. Finally, a 16 ML Bi (11̅0) slab is also constructed to simulate the topological (11̅0) surface of three-dimensional bulk Bi as a topological crystalline insulator (TCI). Furthermore, the consistent topological properties and slightly lower thermodynamic ORR overpotential (η = 0.53 V) are also observed on the thicker slab.

25 ENERGY STORAGE↗
DOE OSTI2026

Complete Phase Transformation of Ir Nanowire Network into Defect-Rich Oxide Catalyst for High-Performance PEM Water Electrolysis

Iridium-based catalysts remain the most reliable option for the oxygen evolution reaction (OER) in proton exchange membrane water electrolyzers (PEMWEs). However, their high cost and limited performance represent critical barriers to the commercialization of this green hydrogen production technology. Herein, we report the creation of a metallic Ir nanowire network (IrNWN), which exhibits superior OER performance through its in-situ transition into an oxide structure with high intrinsic activity. At a low loading of 0.25 mgIr/cm2 in PEMWEs, IrNWN achieved a current density of 3.13 A/cm2 at a cell voltage of 1.8 V, outperforming the commercial Ir-based catalyst and surpassing the Department of Energy (DOE) 2026 technical target. Moreover, the high activity of IrNWN was maintained for 900 hours in a durability test at 2 A/cm2, showing a low degradation rate of 0.042 mV/hour. Structural analysis of the electrochemically oxidized IrNWN revealed the presence of mixed Ir oxidation states and a high density of surface terminal oxygen groups (μ1-O), which contributed to a reduced energy barrier for the rate-determining O-O coupling step.

oxygen evolution reaction↗
DOE OSTI2025

Unveiling the Structure and Dynamics of Water Confined in Colloidal Boehmite Suspensions

Thin fluid layers confined between nanoparticles play an important role in several natural and industrial systems, including radioactive wastes stored in tanks at the U.S. Department of Energy’s Hanford site. Multimodal neutron and computational approaches have been integrated to examine the properties of one, two, and four layers of water (H 2 O or D 2 O) on nanoparticulate, hydrous, or deuterated boehmite (γ-AlOOH or γ-AlOOD). Exposure of deuterated boehmite to H 2 O at 90 °C yielded rapid H/D isotopic exchange likely driven by a Grotthus-like proton-hopping mechanism. The in-plane and out-of-plane vibrations of the structural hydroxyls involved in this exchange were observed for both the hydrated and deuterated boehmite. These observations were confirmed by molecular dynamics simulations that also showed that single water molecules on the (010) surface bond to the structure via four bonds: two from hydrogens (deuteriums) on the water to surrounding oxygens and two from the water’s oxygen to surrounding OD/OH. Bulk water-like properties began to appear once four monolayers of water had been added, but steric crowding limited water diffusion rates once two monolayers had been added. The super-Arrhenius temperature dependence observed at four monolayers indicated glass-like behavior in a well-formed hydrogen-bonding network. Such a network is not sufficiently developed, however, when the surface water coverage is less than four layers. In conclusion, the unique nature of these layers can provide critical information for understanding forces between particles in proximity, and resultant effects on suspension rheology.

Anovitz, Lawrence M. [Oak Ridge National Laborator↗
DOE OSTI2025

What Makes Au Nanospheres Superior to Octahedral and Cubic Counterparts for the Deposition of a Pt Monolayer Shell?

This study demonstrates that Au nanospheres are advantageous over their octahedral and cubic counterparts as seeds in the synthesis of Au@Pt core−shell nanocrystals with a monolayer shell. In combination with experimental characterization, we show through training a machine-learned interatomic potential that the Au nanospheres exhibit a large fraction of lowcoordination atoms which are uniformly distributed over the surface. The corresponding high-index facets, including {211}, {311}, {331}, {210}, and {310}, on a spherical seed promote nucleation while greatly shortening the diffusion distance for adatoms. In addition, the high-index facets are instrumental in retaining the deposited Pt atoms on the outermost surface by retarding their inter-diffusional exchange with the underlying Au atoms. By switching from a monolayer made of pure Pt to those made of Pt−Au alloys, we can optimize both the activity and selectivity of the nanocrystals toward the two-electron oxygen reduction reaction for the electrochemical synthesis of H 2 O 2 . This method should be extendible to the fabrication of other core−shell nanocatalysts with desired monolayer shells for various catalytic reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Hybrid Doping Strategy with High‐Entropy Cu/Fe Surface Modification and Zr Bulk Incorporation for Ni‐Rich Cathodes

A hybrid doping strategy combining Zr 4+ bulk doping with high-entropy Cu 2+ /Fe 3+ surface doping is developed to enhance the structural and interfacial stability of Ni-rich layered oxide cathodes. Cu and Fe are selectively introduced at the particle surface via a surface-selective ion-exchange process, forming a ≈15 nm Fe-rich layer while preserving the layered framework. Compared to the pristine cathode, the hybrid sample exhibits significantly improved electrochemical performance in both half-cell and full-cell configurations. In half-cells, the hybrid retains 88.5% and 90.2% after 100 cycles at 1C under 4.6 and 4.5 V, respectively. During high-voltage full-cell cycling, the hybrid cathode maintains over 80% capacity retention, whereas the pristine counterpart retains less than 10% under identical conditions over the same cycling period. XPS, EELS, and DEMS analyses confirm improved oxygen retention, suppressed gas evolution, and stable surface chemistry, while DFT calculations indicate enhanced Me–O bonding in the selected Fe 0.75 Cu 0.25 (Mn 1/16 Co 2/16 Ni 13/16 )O 2 surface composition, which is identified through DFT-calculated mixing energy reaching a minimum at this ratio, indicating the most thermodynamically favorable configuration. In conclusion, these results demonstrate the effectiveness of this hybrid doping strategy in mitigating coupled degradation pathways in Ni-rich cathodes.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Reports From The Frontier: Overcoming Limitations for Pure-water Anion-exchange-membrane Electrolysis

Anion-exchange-membrane electrolysis is positioned to play a key role in the predicted exponential growth of green hydrogen technology with essential R&D advances. We reveal key design parameters essential to commercialization. First, stable alkaline oxygen-evolution reaction catalysts with high electronic conductivity and minimal surface reconstruction during operation must be designed. Alkaline catalyst layers must also be applied to the membrane electrode assembly with scalable, industrially relevant techniques. Second, ionomer oxidation mitigation strategies must be developed. Furthermore, this approach could also target other creative catalyst layer design, such as phase-separation control to protect oxidation-prone organic components or catalyst engineering to direct selectivity for hydroxide over polymer oxidation. If competitive efficiency and durability can be achieved in pure water, AEM electrolysis has the potential to become a dominant electrolyzer technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Evidence that Surface-Segregated Sr Phases Can Be Removed in LSCF via Ceria Pre-Infiltration, Are Less Apt to Form in SSC

Here Ce 0.9 Gd 0.1 O 1.95−x (GDC) pre-infiltration was performed on 12 vol.% La 0.6 Sr 0.4 Co 0.8 Fe 0.2 O 3−x (LSCF) or Sm 0.5 Sr 0.5 CoO 3−x (SSC) infiltrated GDC Solid Oxide Fuel Cell cathodes. The addition of 7.5 vol.% of ∼40 nm diameter GDC nanoparticles into a ∼30 μ m thick porous scaffold of partially-sintered, sub-micron GDC particles before LSCF infiltration 1) lowered the temperature needed to produce a LSCF-GDC polarization resistance ( R P ) of 0.1 Ohm*cm 2 by ∼50 °C, and 2) reduced the amount of 500 h, 650 °C open-circuit LSCF-GDC R P degradation from ∼37% to ∼6%. In contrast, GDC pre-infiltration had no effect on the initial SSC-GDC R P or the 19% in R P degradation observed during 500 h of 650 °C open-circuit aging. X-Ray Photoelectron Spectroscopy showed that GDC pre-infiltration lowered the concentration of strontium species on the surface of the initial and 650 °C-aged LSCF-GDC, but had no effect on the initial or aged SSC-GDC Sr concentrations. Similarly, Electrochemical Impedance Spectroscopy showed that for both the initial and aged LSCF-GDC, GDC pre-infiltration improved oxygen exchange at the infiltrate-backbone and infiltrate-gas interfaces, but had no effect on the SSC-GDC. Hence, GDC pre-infiltration was concluded to improve LSCF-GDC performance and durability by scavenging exsolved Sr-rich secondary phases that form on the interfaces of LSCF, but not SSC.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Unraveling the origin of antiferromagnetic coupling at YIG/permalloy interface

We investigate the structural and electronic origin of antiferromagnetic (AFM) coupling in the yttrium iron garnet (YIG) and permalloy (Ni 80 ⁢Fe 20 , Py) bilayer system at the atomic level. Ferromagnetic resonance (FMR) spectra reveal unique hybrid modes in samples prepared with surface ion milling, indicative of antiferromagnetic exchange coupling at the YIG/Py interface. Using atomic resolution scanning transmission electron microscopy (STEM), we found that AFM coupling appears at the YIG/Py interface of the tetrahedral YIG surface formed with ion milling. Here, the STEM measurements suggest that the interfacial AFM coupling is predominantly driven by an oxygen-mediated superexchange coupling mechanism, which is confirmed by the density-functional theory (DFT) calculations to be energetically favorable. Thus, the combined experimental and theoretical results reveal the critical role of interfacial atomic structure in determining the type of magnetic coupling in a YIG/ferromagnet heterostructure, and prove that the interfacial structure can be experimentally tuned by surface ion milling.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Greenhouse gas and dissolved oxygen production and consumption rates associated with Regier et al. (2023)

Tidal inundation along the coastal terrestrial-aquatic interface controls soil and sediment biogeochemistry and gas dynamics. Although a rich literature exist on studies of the influence of tidal waters on the biogeochemistry of coastal ecosystem soils, few studies have experimentally addressed the reverse question: How do soils (or sediments) from different coastal ecosystems influence the biogeochemistry of the tidal waters that inundate them? We conducted short-term microcosm laboratory experiments where seawater was amended with sediments and soils collected across regional gradients of inundation exposure (i.e., frequently to rarely inundated) and measured changes in dissolved oxygen and greenhouse gas concentrations to calculate gas consumption or production rates occurring during seawater exposure to terrestrial materials. This data package contains dissolved oxygen and greenhouse gas data collected during incubation of soils and sediments collected at 18 sites, which were used in the publication Regier et al. (2023) entitled “Coastal inundation regime moderates the short-term effects of sediment and soil additions on seawater oxygen and greenhouse gas dynamics: a microcosm experiment” which is published in Frontiers in Marine Science (DOI: https://doi.org/10.3389/fmars.2023.1308590).---Acknowledging EXCHANGE: General Support and Data Product UseWe ask that users of EXCHANGE data add the following acknowledgement when publishing data in scholarly articles and data repositories:"This research is based on work supported by COMPASS-FME, a multi-institutional project supported by the U.S. Department of Energy, Office of Science, Biological and Environmental Research as part of the Environmental System Science Program."

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Synergistic promotion of transition metal ion-exchange in TiO 2 nanoarray-based monolithic catalysts for the selective catalytic reduction of NO x with NH 3

TiO 2 supported catalysts have been widely studied for the selective catalytic reduction (SCR) of NO x ; however, comprehensive understanding of synergistic interactions in multi-component SCR catalysts is still lacking. For this work, transition metal elements (V, Cr, Mn, Fe, Co, Ni, Cu, La, and Ce) were loaded onto TiO 2 nanoarrays via ion-exchange using protonated titanate precursors. Amongst these catalysts, Mn-doped catalysts outperform the others with satisfactory NO conversion and N 2 selectivity. Cu co-doping into the Mn-based catalysts promotes their low-temperature activity by improving reducibility, enhancing surface Mn 4+ species and chemisorbed labile oxygen, and elevating the adsorption capacity of NH 3 and NO x species. While Ce co-doping with Mn prohibits the surface adsorption and formation of NH 3 and NO x derived species, it boosts the N 2 selectivity at high temperatures. By combining Cu and Ce as doping elements in the Mn-based catalysts, both the low-temperature activity and the high-temperature N 2 selectivity are enhanced, and the Langmuir–Hinshelwood reaction mechanism was proved to dominate in the trimetallic Cu–Ce–5Mn/TiO 2 catalysts due to the low energy barrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Oxygen–Chlorine Chemisorption Scaling for Seawater Electrolysis on Transition Metals: The Role of Redox

To clarify what controls species oxidation selectivity in seawater electrolysis, density functional theory (DFT) is used to identify chemisorption enthalpy trends and scaling relations for the simplest relevant adsorbates (O, Cl, and H) on relevant surfaces of 3d transition metals, as well as Pd and Pt, in face-centered-cubic and, if different, their ground-state crystal structures. Approximations are tested for electron exchange-correlation (XC) and van der Waals interactions to assess their ability to reproduce experimental adsorption enthalpies of H and O on Pt(111). The vdW-uncorrected generalized gradient approximation to XC of Perdew, Burke, and Ernzerhof (PBE) agrees most closely with experiments. Using DFT-PBE thereafter, it is determined that the O chemisorption enthalpy on this wide range of transition-metal surfaces is proportional to the sum of first and second atomic ionization energies, akin to a Born–Haber cycle for a redox reaction, indicating that metal redox activity controls O chemisorption strength. Then it is shown that the O and Cl chemisorption enthalpies are strongly correlated, suggesting that the transition metals considered will oxidize unselectively water and Cl – . This strong correlation appears also for crystal reduction potentials of binary oxides and chlorides, indicating a fundamental challenge for future seawater electrode materials design.

08 HYDROGEN↗
DOE OSTI2023

Catalytic Activity and Stability of Non-Platinum Group Metal Oxides for the Oxygen Evolution Reaction in Anion Exchange Membrane Electrolyzers

The activities and stabilities of non-platinum group metals (PGMs) in the forms of monometallic (Mn 2 O 3 , Fe 2 O 3 , Co 3 O 4 , NiO) and bimetallic (NiFe 2 O 4 , CoNiO 2 ) oxides were assessed for the oxygen evolution reaction (OER) in alkaline media and compared with IrO 2 . Both half-cell, rotating disc electrode (RDE) apparatus and single-cell, membrane electrode assemblies (MEA) were used to study kinetic and device-level performance in parallel and to provide insights into the use of these materials in anion exchange membrane (AEM) electrolyzers. Normalization of RDE results by geometric and physical surface areas, double layer capacitance, and metal content probed differences in physically vs electrochemically accessible surface areas and ensured reported trends were independent of the normalization method. The results showed that: (i) Ni- and Co- containing materials met or exceeded IrO 2 performance in both RDE and MEA testing, (ii) Co 3 O 4 deactivated over time-on-stream (1.8 V for 13.5 h) due to oxide and, relatedly, particle growth, (iii) NiFe 2 O 4 increased in activity over time-on-stream due to dissolution of Fe and an increased Ni/Fe ratio, and (iv) reduction of catalyst layer resistance is an avenue to further increase device-level performance. These results demonstrated the clear viability for non-PGMs to be used as anode catalysts in AEM devices.

25 ENERGY STORAGE↗
DOE OSTI2022

Transition-metal doped titanate nanowire photocatalysts boosted by selective ion-exchange induced defect engineering

Defect engineering through elemental doping is an efficient way to boost the performance of semiconductor photocatalysts. For this work, transition-metal (TM) doped titanate nanowires (TNWs) were prepared via ion-exchange over the titanate precursors and demonstrated for the Rhodamine B (RhB) degradation under ultraviolet (UV) light irradiation. The ion-exchange of selective ions (V 5+ , Cr 3+ , Ni 2+ , and Zn 2+ ) with protons from pristine TNWs resulted in the hierarchical meso-porosity of nanowires with large pores of ~5–20 nm by TM doping and small pores of ~3.6–4.5 nm inherited from pristine TNWs, which facilitates the mass transfer while maintaining high surface area and active sites. Meanwhile, the TM intercalation partially reduces the Ti 4+ to Ti 3+ and narrows the optical bandgap, which, together with oxygen vacancies and superoxide radicals from pristine TNWs, enhance the adsorption and photocatalytic degradation performance of RhB. This work helps to elucidate the effects of transition-metal doping and provides a rational strategy towards high performance titanate-based photocatalysts for efficient and sustainable wastewater treatment.

36 MATERIALS SCIENCE↗