Search NASA⌕ Search

SEARCH · Search NASA

Results for “PANEL FLUTTER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1959

Experimental Investigation of Flutter of Buckled Curved Panels Having Longitudinal Stringers at Transonic and Supersonic Speeds

Panel-flutter tests have been made at transonic and supersonic speeds With particular reference to buckled curved panels with longitudinal stringers. Other panel configurations were also tested in an attempt to determine effects of skin thickness, curvature, stringers, buckling, pressure differential, and Mach number on the dynamic pressure necessary to start flutter. For buckled curved panels with longitudinal stringers, the dynamic pressure required to start flutter was increased by increasing the skin thickness and increasing the pressure differential across the panel. There was no apparent effect of Mach number variation from 1.3 to 2.0. None of the curved panels failed because of flutter although the dynamic pressure at the start of flutter was exceeded by a factor of 3 in many cases. curved panels and four flat panels failed because of flutter. The flat panels fluttered at lower dynamic pressures than the curved panels and four flat panels failed because of flutter.

Tuovila, W. J.↗
NASA NTRS1974

Flutter of panels on discrete flexible supports

The supersonic flutter of wide panels on discrete flexible supports is investigated for three different panel-support configurations. The first study examines the effect of support stiffness on the flutter behavior of a specific five-support configuration with leading-and trailing-edge overhangs; this configuration was recently under consideration for a heat shield on an entry body. The second study investigates the effect of support stiffness on flutter of panels with various numbers of equally spaced supports. The third study examines the effect of center-support location on the flutter of panels with three supports. Results are presented in nondimensional form. The analysis is based on wide-plate structural theory and Ackeret aerodynamics. Finite differences are employed to obtain solutions for flutter pressure. A computer program based on this analysis and including a direct solution technique is presented. The program can be used to find the flutter pressure of wide panels of variable thickness supported by any number of flexible supports.

Stein, M.↗
NASA NTRS1991

A vector unsymmetric eigenequation solver for nonlinear flutter analysis on high-performance computers

A finite element approach is presented for determining the nonlinear flutter characteristics of composite panels using unsteady, third-order piston theory aerodynamics. Both nonlinear structural (large-amplitude) and nonlinear aerodynamics terms are considered in the finite element formulation. Solution procedures are presented to solve the nonlinear panel flutter and the large-amplitude free vibration finite element equations. Nonlinear aerodynamic and linear structural finite element flutter results for composite panels are also presented. An efficient, vector-version generalized unsymmetric eigenequation solver is developed for large-amplitude vibration and nonlinear panel flutter analyses on high-performance computers.

Qin, Jiangning↗
NASA NTRS1974

Flutter of elastically supported orthotropic panels including the effects of flow angle

A theoretical panel flutter analysis and computer program was developed which is capable of analyzing an orthotropic panel with in-plane loads, at various angles of cross flow and various edge-support conditions. The resulting modal analysis uses linear piston-theory aerodynamics and includes both aerodynamic and structural damping. Calculations made for typical panels with no in-plane forces show that large reductions in dynamic presure for flutter are possible with only small changes in flow angle. The reduction in dynamic pressure with flow angle is greater for elastically supported panels than for simply supported panels. Aerodynamic damping has a significant stabilizing effect at all flow angles except zero, whereas structural damping has negligible effect.

Sawyer, J. W.↗
NASA NTRS1975

Supersonic flutter of panels loaded with inplane shear

A modal flutter analysis for biaxially loaded, orthotropic panels, using linear piston-theory aerodynamics, was extended in order to include the effects of inplane shear loading. Flutter boundaries for shear loads up to buckling are calculated for simply supported, isotropic panels of various length-width ratios and for a square, isotropic panel with elastic boundary conditions along the leading and trailing edges. These flutter boundaries are used to define conservative design curves. Sample calculations made using these design curves indicate that practical panels, which have otherwise been adequately designed, could become flutter critical if the inplane shear loads approach the buckling value.

Sawyer, J. W.↗
NASA NTRS1975

Stability analysis of nonlinear autonomous systems - General theory and application to flutter

The analysis makes use of a singular perturbation method, the multiple time scaling. Concepts of stable and unstable limit cycles are introduced. The solution is obtained in the form of an asymptotic expansion. Numerical results are presented for the nonlinear flutter of panels and airfoils in supersonic flow. The approach used is an extension of a method for analyzing nonlinear panel flutter reported by Morino (1969).

Smith, L. L.↗
NASA NTRS1991

Finite element nonlinear flutter and fatigue life of 2-D panels with temperature effects

A frequency domain method for two-dimensional nonlinear panel flutter with thermal effects obtained from a consistent finite element formulation is presented. The von Karman nonlinear strain-displacement relation is used to account for large deflections, and the quasi-steady first-order piston theory is employed for aerodynamic loading. The finite element frequency domain results are compared with analytical time domain solutions. In a limit-cycle motion, the panel frequency and stress can be determined, thus fatigue life can be predicted. The influence of temperature and dynamic pressure on panel fatigue life is presented. An endurance dynamic pressure can be established at a given temperature from the present method.

Mei, Chuh↗
NASA NTRS1972

Improvements of Zeyded method for calculating flutter of flat panels

Method for calculating flutter boundaries and estimating stresses in infinite spanwise array of panels is presented. Numerical analyses are included for pinned edge panels, isotropic panel material, zero viscous damping, and no elastic foundation. Design flutter boundaries are presented for aluminum panels on Saturn spacecraft trajectory.

Yates, J. E.↗
NASA NTRS1992

Results of a FRSI material test under Space Shuttle ascent conditions in the Ames Research Center 9x7 foot supersonic wind tunnel (OS13). Space Shuttle aerothermodynamic data report

A test was conducted in the NASA/ARC 9 x 7 foot supersonic wind tunnel to verify the integrity of Felt Reusable Surface Insulation (FRSI) material in a panel flutter environment. A FRSI sample panel was subjected to the shocks, pressure gradients, and turbulence characteristics encountered at dynamic pressure 1.5 times the 3(sigma) dispersed trajectory flight conditions of the Space Shuttle. Static and fluctuating pressure data were obtained for Mach numbers ranging from 1.55 to 2.5 with dynamic pressures of 625 to 1250 psf. The FRSI panel suffered no appreciable damage as a result of the test.

Lemoine, P. L.↗
NASA NTRS1969

Aerodynamic forces of fluttering cylindrical and/or planar structures

Complexity of the phenomena of panel flutter instability has resulted in the necessity of developing separate design criteria for a variety of flow conditions and panel configurations. Vehicle panel configurations with low aspect ratios are of interest in low supersonic flow, where boundary layer effects are important.

Yates, J. E.↗