Search NASA⌕ Search

SEARCH · Search NASA

Results for “PETRO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

A microreactor array for spatially resolved measurement of catalytic activity for high-throughput catalysis science

We describe a 100 channel microreactor array capable of spatially resolved measurement of catalytic activity across the surface of a flat substrate. When used in conjunction with a composition spread alloy film (CSAF, e.g. Pd{sub x}Cu{sub y}Au{sub 1-x-y}) across which component concentrations vary smoothly, such measurements permit high-throughput analysis of catalytic activity and selectivity as a function of catalyst composition. In the reported implementation, the system achieves spatial resolution of 1 mm{sup 2} over a 10×10 mm{sup 2} area. During operation, the reactant gases are delivered at constant flow rate to 100 points of differing composition on the CSAF surface by means of a 100-channel microfluidic device. After coming into contact with the CSAF catalyst surface, the product gas mixture from each of the 100 points is withdrawn separately through a set of 100 isolated channels for analysis using a mass spectrometer. We demonstrate the operation of the device on a Pd{sub x}Cu{sub y}Au{sub 1-x-y} CSAF catalyzing the H{sub 2}-D{sub 2} exchange reaction at 333 K. In essentially a single experiment, we measured the catalytic activity over a broad swathe of concentrations from the ternary composition space of the Pd{sub x}Cu{sub y}Au{sub 1-x-y} alloy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

D-leaping: Accelerating stochastic simulation algorithms for reactions with delays

We propose a novel, accelerated algorithm for the approximate stochastic simulation of biochemical systems with delays. The present work extends existing accelerated algorithms by distributing, in a time adaptive fashion, the delayed reactions so as to minimize the computational effort while preserving their accuracy. The accuracy of the present algorithm is assessed by comparing its results to those of the corresponding delay differential equations for a representative biochemical system. In addition, the fluctuations produced from the present algorithm are comparable to those from an exact stochastic simulation with delays. The algorithm is used to simulate biochemical systems that model oscillatory gene expression. The results indicate that the present algorithm is competitive with existing works for several benchmark problems while it is orders of magnitude faster for certain systems of biochemical reactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Adaptive mesh refinement for stochastic reaction-diffusion processes

We present an algorithm for adaptive mesh refinement applied to mesoscopic stochastic simulations of spatially evolving reaction-diffusion processes. The transition rates for the diffusion process are derived on adaptive, locally refined structured meshes. Convergence of the diffusion process is presented and the fluctuations of the stochastic process are verified. Furthermore, a refinement criterion is proposed for the evolution of the adaptive mesh. The method is validated in simulations of reaction-diffusion processes as described by the Fisher-Kolmogorov and Gray-Scott equations.

97 MATHEMATICS AND COMPUTING↗

Multiscale stochastic simulations of chemical reactions with regulated scale separation

We present a coupling of multiscale frameworks with accelerated stochastic simulation algorithms for systems of chemical reactions with disparate propensities. The algorithms regulate the propensities of the fast and slow reactions of the system, using alternating micro and macro sub-steps simulated with accelerated algorithms such as τ and R-leaping. The proposed algorithms are shown to provide significant speedups in simulations of stiff systems of chemical reactions with a trade-off in accuracy as controlled by a regulating parameter. More importantly, the error of the methods exhibits a cutoff phenomenon that allows for optimal parameter choices. Numerical experiments demonstrate that hybrid algorithms involving accelerated stochastic simulations can be, in certain cases, more accurate while faster, than their corresponding stochastic simulation algorithm counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A variable high-order shock-capturing finite difference method with GP-WENO

Here, we present a new finite difference shock-capturing scheme for hyperbolic equations on static uniform grids. The method provides selectable high-order accuracy by employing a kernel-based Gaussian Process (GP) data prediction method which is an extension of the GP high-order method originally introduced in a finite volume framework by the same authors. The method interpolates Riemann states to high order, replacing the conventional polynomial interpolations with polynomial-free GP-based interpolations. For shocks and discontinuities, this GP interpolation scheme uses a nonlinear shock handling strategy similar to Weighted Essentially Non-Oscillatory (WENO), with a novelty consisting in the fact that nonlinear smoothness indicators are formulated in terms of the Gaussian likelihood of the local stencil data, replacing the conventional L 2 -type smoothness indicators of the original WENO method. We demonstrate that these GP-based smoothness indicators play a key role in the new algorithm, providing significant improvements in delivering high – and selectable – order accuracy in smooth flows, while successfully delivering non-oscillatory solution behavior in discontinuous flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Studying the impact of radioactive charging on the microphysical evolution and transport of radioactive aerosols with the TOMAS-RC v1 framework

We present that radioactive charging can significantly impact the way radioactive aerosols behave, and as a result their lifetime, but such effects are neglected in predictive model studies of radioactive plumes. The objective of this work is to determine the influence of radioactive charging on the vertical transport of radioactive aerosols in the atmosphere, through its effect on coagulation and deposition, as well as quantifying the impact of this charging on aerosol lifetime. The TwO-Moment Aerosol Sectional (TOMAS) microphysical model was extended to account for radioactive charging effects on coagulation in a computationally efficient way. The expanded model, TOMAS-RC (TOMAS with Radioactive Charging effects), was then used to simulate the microphysical evolution and deposition of radioactive aerosol (containing the isotopes 131 I and 137 Cs) in a number of idealized atmospheric transport experiments. Results indicate that radioactive charging can facilitate or suppress coagulation of radioactive aerosols, thus influencing the deposition patterns and total amount of radioactive aerosol mass available for long-range transport. Sensitivity simulations to uncertain parameters affirm the potential importance of radioactive charging effects. Lastly, an important finding is that charging of neutral, coarse mode aerosol from background radiation can reduce coagulation rates and extend its lifetime in the atmosphere by up to a factor of 2.

54 ENVIRONMENTAL SCIENCES↗

Nanoscale interlayer defects in iron arsenides

Using a local real-space microscopy probe, we investigate evidence of nanoscale interlayer defects along the c-crystallographic direction in BaFe 2 As 2 (‘122’) based iron-arsenide superconductors. We find ordered 122 atomic arrangements within the ab -plane, and within regions of ~10 to 20 nm size perpendicular to this plane. While the FeAs substructure is very rigid, Ba ions are relatively weakly bound and can be displaced from the 122, forming stacking faults resulting in the physical separation of the 122 between adjacent ordered domains. The evidence for interlayer defects between the FeAs superconducting planes gives perspective on the minimal connection between interlayer chemical disorder and high-temperature superconductivity. Specifically, the Cooper pairs may be finding a way around such localized interlayer defects through a percolative path of the ordered layered 122 lattice that may not affect T c .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal analysis and in vitro bioactivity of bioactive glass-alumina composites

Bioactive glass-alumina composite (BA) pellets were fabricated in the range 95/5-60/40 wt.% respectively and were heat-treated under a specific thermal treatment up to 950 {sup o}C. Control (unheated) and heat-treated pellets were immersed in Simulated Body Fluid (SBF) for bioactivity testing. All pellets before and after immersion in SBF were studied by Fourier Transform Infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM-EDS) and X-ray Diffraction (XRD) analysis. All composite pellets presented bioactive response. On the surface of the heat-treated pellets the development of a rich biological hydroxyapatite (HAp) layer was delayed for one day, compared to the respective control pellets. Independent of the proportion of the two components, all composites of each group (control and heat-treated) presented the same bioactive response as a function of immersion time in SBF. It was found that by the applied methodology, Al{sub 2}O{sub 3} can be successfully applied in bioactive glass composites without obstructing their bioactive response. - Research Highlights: {yields} Isostatically pressed glass-alumina composites presented apatite-forming ability. {yields} The interaction with SBF resulted in an aluminium phosphate phase formation. {yields} The formation of an aluminium phosphate phase enhanced the in vitro apatite growth.

36 MATERIALS SCIENCE↗

Thermodynamic origin of nonvolatility in resistive memory

Electronic switches based on the migration of high-density point defects, or memristors, are poised to revolutionize post-digital electronics. Despite significant research, key mechanisms for filament formation and oxygen transport remain unresolved, hindering our ability to predict and design device properties. For example, experiments have achieved 10 orders of magnitude longer retention times than predicted by current models. Here, using electrical measurements, scanning probe microscopy, and first-principles calculations on tantalum oxide memristors, we reveal that the formation and stability of conductive filaments crucially depend on the thermodynamic stability of the amorphous oxygen-rich and oxygen-poor compounds, which undergo composition phase separation. Including the previously neglected effects of this amorphous phase separation reconciles unexplained discrepancies in retention and enables predictive design of key performance indicators such as retention stability. Furthermore, this result emphasizes non-ideal thermodynamic interactions as key design criteria in post-digital devices with defect densities substantially exceeding those of today’s covalent semiconductors.

36 MATERIALS SCIENCE↗

Soot formation and precursor chemistry in Counterflow flames of aviation fuel surrogates

To meet market demands, the aviation sector is interested in utilizing drop-in Synthetic Aviation Turbine Fuels (SATF), either as neat fuels or in blends with conventional Jet A. SATF currently approved in standard specifications may have lower aromatic content with significant fractions of normal, branched, and cyclo-alkanes. Fundamental studies on soot formation from aviation fuels (Jet A, SATF) and their surrogate components are essential to understand how fuel composition influences soot and soot precursor formation. Here, this study reports new measurements of polycyclic aromatic hydrocarbons (PAH) and soot in counterflow diffusion flames (CDFs) of aviation fuel surrogates. Both intrusive and non-intrusive diagnostics are employed to determine the profiles of temperature, gas phase species, PAHs (up to C16), and soot volume fraction (SVF) in CDFs of iso-octane and surrogate mixtures. These measurements shed light on the transition of soot precursors to primary soot particles. In addition to serving as a common surrogate component in Jet A surrogate mixtures, iso-octane is a template species for larger, less volatile branched alkanes found in SATF mixtures. The newly developed Lawrence Livermore National Laboratory (LLNL) PAH and soot model successfully captures temperature, precursor species, and SVF profiles for the mixtures and conditions discussed in this work. Finally, a high-fidelity surrogate for Jet A is proposed that matches targeted physical and chemical properties well, while leveraging the wide range of candidate fuel molecules available in the LLNL detailed chemical model. The proposed surrogate formulation is validated against newly acquired measurements of the surrogate and literature measurements of Jet A. These new experiments and simulations provide critical insights into the PAH and soot formation from aviation fuels. Reaction pathways which require further investigation are highlighted, such that future work may bridge the remaining quantitative gaps in predicting soot formation from aviation fuel surrogates and surrogate components.

Aviation fuels↗

Structural and electronic properties of ultrathin picene films on the Ag(100) surface

In this study we investigate using scanning tunneling microscopy and electronic structure calculations the growth, assembly, and electronic properties of picene molecules on the Ag(100), Ag(111), and Cu(111) surfaces, with particular emphasis on Ag(100). In each case, the picene molecules are found to lie parallel to the surface at coverages up to half a monolayer and to adopt alternating parallel and tilted orientations at full monolayer coverage. In the latter case, the arrangement of the molecules is roughly similar to that in the bulk crystal, making ultrathin films of picene interesting model systems and worthwhile to explore its electronic properties. On the 2 metal surfaces considered, the growth mode of picene is quite different from that of its structural isomer pentacene, which forms bilayer coverage on top of a dense monolayer of flat-lying molecules on metal surfaces. Tunneling spectroscopy measurements provide estimates of the energies of several low-lying molecular orbitals as well as of the highest unoccupied molecular orbital of the absorbed picene molecules. From analysis of these results, we establish that the on-site Coulomb repulsion for picene decreases by ~ 2 eV in going from the gas phase to the full monolayer on Ag(100), bringing it close to that of the undoped bulk crystal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Squeezing Noise in Microscopy with Quantum Light

Quantum-enhanced microscopes capable of probing classically inaccessible material properties have drawn increasing interest, but most proof-of-principle quantum microscopes have not surpassed classical limits. Here, we discuss the promise and obstacles associated with the use of quantum light with reduced noise (‘squeezed’ light) for quantum-enhanced atomic force microscopy, bioimaging, magneto-optical measurements, and Raman spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Local bias-induced phase transitions

Electrical bias-induced phase transitions underpin a wide range of applications from data storage to energy generation and conversion. The mechanisms behind these transitions are often quite complex and in many cases are extremely sensitive to local defects that act as centers for local transformations or pinning. Furthermore, using ferroelectrics as an example, we review methods for probing bias-induced phase transitions and discuss the current limitations and challenges for extending the methods to field-induced phase transitions and electrochemical reactions in energy storage, biological and molecular systems.

36 MATERIALS SCIENCE↗