Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA STABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

High-temperature erosion of plasma-sprayed, yttria-stabilized zirconia in a simulated turbine environment

A series of rig calibration and high temperature tests simulating gas path seal erosion in turbine engines were performed at three impingement angles and at three downstream locations. Plasma sprayed, yttria stablized zirconia specimens were tested. Steady state erosion curves presented for 19 test specimens indicate a brittle type of material erosion despite scanning electron microscopy evidence of plastic deformation. Steady state erosion results were not sensitive to downstream location but were sensitive to impingement angle. At difference downstream locations specimen surface temperature varied from 1250 to 1600 C (2280 to 2900 F) and particle velocity varied from 260 to 320 m/s (850 to 1050 ft/s). The mass ratio of combustion products to erosive grit material was typically 240.

Hanschuh, R. F.↗

Effects of the interaction between plasma and neutrals on the stability of the cometary ionopause

It is pointed out that plasma in the cometary ionosphere is collisionally coupled to neutrals which flow out from the nucleus. The present study is concerned with the effects of this coupling on the stability of the cometary ionopause. Because of this coupling, a damping of waves occurs. However, it is found that the coupling alone cannot quench the Kelvin-Helmholtz (K-H) instability, in contradiction to the assumption by Galeev and Lipatov (1984). Notwithstanding the plasma-neutral drag, the entire cometary ionopause can be subjected to the K-H instability. This situation might be responsible for the penetration of the interplanetary magnetic field into the cometary ionosphere, as it has been suggested by Ershkovich and Mendis (1983).

Ershkovich, A. I.↗

Three-dimensional simulation study of ionospheric plasma clouds

The results of fully three-dimensional numerical simulations of ionospheric plasma cloud evolution are presented. The evolution of the plasma cloud considered by Drake and Huba (1987) in the limit of vanishingly small ion compressibility is discussed. Simulations support the results of the analytical theory: finite plasma temperature, combined with fully three-dimensional plasma dynamics, is a stabilizing influence on plasma cloud evolution. This stability is associated with sheared azimuthal ion flows in the vicinity of the cloud surface. Cloud evolution using realistic values of ion compressibility show that the cloud rapidly diffuses to a state in which the sheared azimuthal flow is substantially reduced; subsequently, the cloud becomes unstable and structures.

Zalesak, S. T.↗

Observation of a new pedestal stability regime in MAST Upgrade H-mode plasmas

Abstract The first pedestal stability and structure analysis on the new MAST Upgrade (MAST-U) spherical tokamak H-mode plasmas is presented. Our results indicate that MAST-U pedestals are close to the low toroidal mode number ( n ) peeling branch of the peeling-ballooning instability, in contrast with MAST H-mode pedestals which were deeply in the high- n ballooning branch. This offers the possibility of reaching the ELM-free quiescent H-mode (Burrell et al 2005 Plasma Phys. Control. Fusion 47 B37–B52) or high-performance super H-mode (Snyder et al 2015 Nucl. Fusion 55 083026; Snyder et al 2019 Nucl. Fusion 59 086017) regimes. In addition, the coupling between the peeling and ballooning branches is weak in MAST-U, suggesting that a path to very high pedestal pressure gradient at high density may exist with sufficient heating power. A possible explanation for the differences between MAST and MAST-U pedestal stability is given in terms of plasma shaping parameters, in particular squareness and elongation, as well as the pedestal top temperature and collisionality.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear stability of Halley comethosheath with transverse plasma motion

Weakly nonlinear Magneto Hydrodynamic (MHD) stability of the Halley cometosheath determined by the balance between the outward ion-neutral drag force and the inward Lorentz force is investigated including the transverse plasma motion as observed in the flanks with the help of the method of multiple scales. The eigenvalues and the eigenfunctions are obtained for the linear problem and the time evolution of the amplitude is obtained using the solvability condition for the solution of the second order problem. The diamagnetic cavity boundary and the adjacent layer of about 100 km thickness is found unstable for the travelling waves of certain wave numbers. Halley ionopause has been observed to have strong ripples with a wavelength of several hundred kilometers. It is found that nonlinear effects have stabilizing effect.

Srivastava, Krishna M.↗

Plasma sheet convection and the stability of the magnetotail

Particle simulations are used to investigate the effects of plasma sheet convection into regions of increasing tail lobe magnetic field strength on the stability of a magnetotail equilibrium. The self-consistent treatment of convection first drives B(z) to zero on axis in the region of the strongest lobe field B(x) and then causes the equilibrium to break due to the rapid growth of tearing modes driven by the induced temperature anisotropy. The net result is the evolution of the inward-convecting plasma sheet into a slowly moving or stagnant plasmoid. The time scale for this process is much more rapid than that associated with particle drift losses across the tail. These results support the suggestion that steady convection within the plasma sheet may not be possible.

Pritchett, P. L.↗

Identification of a window for quiescent H-mode operation in MHD stability diagram of DIII-D plasmas

A window for quiescent H-mode (QH-mode) operation in DIII-D plasmas in the diagram of pedestal magnetohydrodynamic (MHD) stability was identified through linear MHD stability analysis, accounting for the effects of plasma rotation and ion diamagnetic drift. The operation window lies between the stability boundaries of the kink/peeling mode (K/PM) identified with and without the inclusion of plasma rotation effects. In this region, the mode remains unstable unless rotation effects are considered alongside the ion diamagnetic drift, which is consistently included in the analysis. The stabilization of the MHD mode, facilitated by the coupled effects of plasma rotation and ion diamagnetic drift, plays a crucial role in widening the window, enabling the attainment of the QH-mode state. Furthermore, the suppression of edge localized modes (ELM) can be achieved by controlling the pedestal structure to ensure the plasma state remains within the operation window. The location of the operation window in the stability diagram depends on the K/PM stability properties. Therefore, optimizing conditions for QH-mode requires adjustments based on changes in stability characteristics. A pressure pedestal and its associated bootstrap current density near the last closed flux surface are advantageous for situating the plasma state within the window. However, excessive current density can trigger ELMs. This trend was confirmed through comparisons of MHD stability diagrams between QH-mode and ELMy H-mode plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydromagnetic stability

Stability of magnetized plasmas - gravitational instability, effects of finite Larmor radius, frequency, and resistivity

MAGNETOHYDRODYNAMIC STABILITY↗

Cool regions in relativistic plasmas - Thermal instabilities

The thermal stability of a plasma consisting of dynamically dominant relativistic electrons and a warm inertial gas is studied. Bremsstrahlung, Coulomb, synchrotron, and inverse Compton losses are considered; it is found that plasmas in which the cooling is dominated by either of the first two processes are generally unstable, while synchrotron losses may or may not cause instability and inverse Compton losses are stabilizing. Characteristic growth times and unstable scales are determined from linear analysis. Applications of this instability to quasar atmospheres and to extended radio galaxies are discussed briefly.

Eilek, J. A.↗

Coulomb thermal properties and stability of the Io plasma torus

Coulomb collisional energy exchange rates are computed for a model of the Io plasma torus consisting of newly created pickup ions, a background of thermally degraded intermediary ions, and a population of cooler electrons. The electrons are collisionally heated by both the pickup ions and background ions and are cooled by electron impact excitation of plasma ions which radiate in the EUV. It is found that a relative concentration of S III pickup ions forbidden S III/electrons = 0.1 with a temperature of 340 eV can deliver energy to the electrons at a rate of 3 x 10 to the -13th erg/cu cm per sec, sufficient to power the EUV emissions in the Io torus. The model predicts a background ion temperature Ti of about 53 eV and an electron temperature Te of about 5.5 eV on the basis of steady-state energy balance relations at Coulomb rates. The model also predicts electron temperature fluctuations at the 30 percent level on a time scale of less than 11 hours, consistent with recent observations of this phenomenon.

Barbosa, D. D.↗

Stability of the Halley Cometo-Sheath with Resistivity and Plasma Motion

The MHD stability of the cometary inner shealth determined by the balance between the inward Lorentz body force and the outward ion-neutral drag force is investigated by numerically solving the wave equations which include resistivity, plasma motion and plasma pressure with the help of two-point boundary value method.

Comets Cometosheath MHD Stability↗

Resistive-heating instability of a compressible, force-free plasma

The thermal stability of a resistive, force-free plasma in a two-dimensional, slab geometry is investigated numerically. Linearly unstable modes that arise as an energetic consequence of Ohmic heating are examined in relation to the dynamic magnetic-tearing instability. Plasma compression is found to give rise to a set of unstable thermal modes not seen in previous incompressible studies. Such modes can occur in parameter regimes where no purely growing tearing mode exists.

Sparks, L.↗