Search NASA⌕ Search

SEARCH · Search NASA

Results for “POTENTIAL PROBLEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Exhaustive Thresholds and Resistance Checkpoints

Once deployed, all intricate systems that operate for a long time (such as an airplane or chemical processing plant) experience degraded performance during operational lifetime. These can result from losses of integrity in subsystems and parts that generally do not materially impact the operation of the vehicle (e.g., the light behind the button that opens the sliding door of the minivan). Or it can result from loss of more critical parts or subsystems. Such losses need to be handled quickly in order to avoid loss of personnel, mission, or part of the system itself. In order to manage degraded systems, knowledge of its potential problem areas and the means by which these problems are detected should be developed during the initial development of the system. Once determined, a web of sensors is employed and their outputs are monitored with other system parameters while the system is in preparation or operation. Just gathering the data is only part of the story. The interpretation of the data itself and the response of the system must be carefully developed as well to avoid a mishap. Typically, systems use a test-threshold-response paradigm to process potential system faults. However, such processing sub-systems can suffer from errors and oversights of a consistent type, causing system aberrant behavior instead of expected system and recovery operations. In our study, we developed a complete checklist for determining the completeness of a fault system and its robustness to common processing and response difficulties.

Easton, Charles↗

Measurement of atmospheric OH by titration of near-IR fluorescent dyes

Recent research has shown that certain polymethine dyes can be detected at ultratrace levels (greater than or equal to 6x10(exp -14) M) in solution by fluorimetry. These detection limits are possible because of the inherent sensitivity of fluorescence techniques, because the dyes fluoresce in the near infrared region where background interference is negligible, and because powerful infrared diode lasers are now available to improve the signal to noise ratio. Other work has shown that the hydroxyl radical destroys the ability of polymethine dyes to fluoresce. These observations form the basis for a new hydroxyl radical detector that is essentially a fluorometric titrator. Theoretically, the detector should show an acceptable sensitivity and response time. Assuming that the atmospheric HO concentration is about 10(exp -11) moles m(exp -3) (i.e. 10(exp 6) molecules cm(exp -3)), then 10 L of air 'titrated' with 20 mL of 10(exp -11) M dye solution (an easily detected concentration) should result in a drop in the fluorescent signal of 50 percent - a readily detectable change. At a flow rate of 3 L min(exp -1) the sampling time would be 3 minutes. The biggest potential problem is selectivity: other oxidants may also cause the fluorescence signal to be lost. The chemistry of polymethine dyes has not been studied in detail and so no quantitative data are available. However, a survey of the literature suggests that in general HO should react up to six orders of magnitude faster than HO2 and other radicals such as RO2 and RO. It should also react much more rapidly than H2O2 and O3. Thus it may be possible to discriminate kinetically against potential interfering substances. It was shown in the laboratory that 10(exp -4) M H2O2 has little effect on the absorption spectrum of the dye IR125 over a period of hours but that the band at 780 nm is slowly lost in water over a period of days even under argon in the dark. By contrast, DMSO solutions of IR125 are stable.

Betterton, Eric A.↗

4.32 Billion Year Old Impact Melts at Apollo 14: Dating the Procellarum Basin?

Introduction: Recent work has improved our understanding of lunar crustal structure and basin evolution on the Moon, but its early impact history and implications for solar system dynamics remain poorly established [1,2]. In particular, there is a derth of absolute ages, especially for the period >4.0 Ga, that could be related to basin-forming events. Here we present U-Pb isotopic data for Zr-rich minerals found in impact-melt fragments from Apollo 14 soil sample 14163 that, when combined with previously published data, dates an impact event at 4324±15 Ma. The compositions and ages of these impact-melt fragments provide unique information about the timing of early impact events and the composition of the lunar crust. Results: Fourteen rocklets ranging in size from 1 to 3 mm were extracted from soil 14163. Most are impactmelt rocks with 10-30% clasts of mostly pyroxene and plagioclase (100 to 500 μm) in a crystalline matrix. Textures of the matrix vary from subophitic, formed by intergrowths of 10-20 μm plagioclase and pyroxene crystals, to poikilitic, with plagioclase and pyroxene reaching 20-50 μm size. Some fragments that contain no visible clasts have similar textures are also interpreted as impact-melt rocks. All fragments contain notably large proportions of euhedral to subhedral ilmenite, zircon, apatite/merrillite and less abundant zirconolite and baddeleyite in the melt matrices. These grains often form intricate intergrowths with each other and rock-forming minerals, indicating their crystallization from the melt (Fig. 1). However, some slightly larger (~50 μm) zircon and phosphate grains can be interpreted as relict clasts based on their granular textures and relationships with the surrounding phases (Fig. 1). This implies that zircon and phosphate minerals were present in the target rocks. Some of these grains were profoundly remelted during the impact, which resulted in an oversaturation of the melt in Zr and P and crystallization of new grains of Zrrich minerals and phosphates during melt solidification. The presence of zircon and phosphates indicates that the melts were significantly enriched in KREEP components and ties their provenance to the Procellarum- KREEP Terrane (PKT) [3]. Combined U-Pb zircon data obtained for all fragments form two main clusters on a concordia diagram (Fig. 2), between about 4.3 and 3.9 Ga. Phosphate data mostly concentrate on the younger end of this age range but some analyses are almost as old as the older zircon grains (Fig. 2). Figure 1: Zircon (Zr) and phosphate (Apt; Mer) grains in impact melt fragments from Apollo 14 soil 14161. A-zircon grains crystallized from impact melt; B-phosphate grain inherited from the target; C- granular zircon grains Our interpretation of these data is that all U-rich minerals experienced variable resetting of the U-Pb system, with phosphate, where closure temperature is significantly lower than that in zircon, affected more profoundly by Pb loss than zircon. Our best estimate of the time of formation of zircon and phosphate is based on statistically valid analysis of grains interpreted texturally as grown from the impact melt (Fig. 2). Ten of these analyses define an age of 4324±15 Ma (MSWD=3.0, probability of fit P=0.002). Our best estimate for the time of resetting is obtained by combining data from phosphates that are statistically indistinguishable from 3.9 Ga within the analytical uncertainties. This group is represented by 18 analyses of 15 phosphate grains from different fragments (Fig. 2) and defines an age of 3922±6 Ma (MSWD=1.2, P=0.23). Conversely, a minimum age of the target lithologies, remelted in the impact that produced the rocklets studied here (Fig. 2), can be determined from the five oldest analyses of zircon clasts at 4338±13 Ma (MSWD=1.5, P=0.2), which is indistinguishable from the age of the impact melt within the uncertainties. The obtained ages, combined with textural evidence, imply that the impact melt was formed at 4324±15 Ma, and that it occurred in a zircon-rich target with a minimum age of 4338±13 Ma. Further reworking occurred during a second impact event at 3922±6 Ma. Discussion: The younger age of 3922±6 Ma can be interpreted as the time of the Imbrium impact. The older age of 4324±15 Ma would then be the time of formation of the impact melt, which was then caught in the Imbrium ejecta either at the Apollo 14 landing site or within the target rocks of the Imbrium impact. The presence of abundant accessory phases such as zircons and phosphates is consistent with a substantial KREEP component in the analyzed particles. The current distribution of KREEP on the lunar surface appears to be strongly influenced by Imbrum ejecta [4] so interpretation of the 4.32 Ga age depends in part on assumed structure of the pre-impact crust and distribution of KREEP within the crust. If KREEP was present only in the deep crust at 4.32 Ga, then a basin-scale impact possibly analogous to Imbrium or larger may be necessary to excavate a KREEPy impact melt at this time. However, if KREEPy materials were present closer to the surface perhaps due to redistribution related to Mg-suite magmatism, then smaller impacts might be able to rework KREEPy compositions at shallower depths. The coherence of the data on the particles analysed here suggests a large volume of melt that has been preserved since 4.32 Ga, consistent with a large impact event. Relict zircons and mineral clasts suggests that the igneous crust in the vicinity of this impact was well developed by at least 4.34 Ga, similar to the model age of KREEP and older than the isochron ages of many Mg-suite cumulates [5]. A problem that confronts all lunar sample studies using the current collection is that the pre-Imbrium geology of the PKT (the source of these 4.32 Ga impact melts) is not well constrained. The South Pole-Aitken basin contains regions that are moderately enriched in Th, but its ejecta is Th-poor [6]; therefore these A14 fragments are probably not SPA ejecta. Alternatively, these fragments may represent formation of a hypothesized Procellarum basin [7] although the lack of a clearly defined basin ejecta signature is a potential problem with that interpretation. In any case, they provide a younger limit on the age of lunar differentiation and formation of KREEP within the lunar crust. Figure 2: U-Pb data for zircon and phosphate grains from impact melt fragments. A-all data; B-data used for age calculations. References: [1] Orgel C., Michael G., Fassett C. I., van der Bogert C. H., Riedel C., Kneissl T., and Hiesinger H. (2018) J. Geophys. Res. Planets 123, 748- 762. [2] Evans A. J., Andrews-Hanna J. C., Head J. W., Soderblom J. M., Solomon S. C., and Zuber M. T. (2018) J. Geophys. Planets. 123, 1596-1617. [3] Jolliff, B.L., Gillis, J.J., Haskin, L.A., Korotev, R.L. and Wieczorek, M.A. (2000) J. Geophys. Res: Planets 105, 4197-4216. [4] Haskin L. A. (1998) J. Geophys. Res. Planets 103, 1679-1689. [5] Borg L.E., Gaffney A.M., and Shearer C.K. (2015) MAPS 50, 715-732. [6] Moriarty, D.P., Watkins, R.N., Valencia, S.N., Kendall, J.D., Evans, A.J., Dygert, N. and Petro, N.E. (2021) J. Geophys. Res. Planets 126. [7] Zhu, M.H., Wünnemann, K., Potter, R.W., Kleine, T. and Morbidelli, A. (2019) J. Geophys. Res: Planets 124, 2117-2140

M D Norman↗

Computer analysis of effects of altering jet fuel properties on refinery costs and yields

This study was undertaken to evaluate the adequacy of future U.S. jet fuel supplies, the potential for large increases in the cost of jet fuel, and to what extent a relaxation in jet fuel properties would remedy these potential problems. The results of the study indicate that refiners should be able to meet jet fuel output requirements in all regions of the country within the current Jet A specifications during the 1990-2010 period. The results also indicate that it will be more difficult to meet Jet A specifications on the West Coast, because the feedstock quality is worse and the required jet fuel yield (jet fuel/crude refined) is higher than in the East. The results show that jet fuel production costs could be reduced by relaxing fuel properties. Potential cost savings in the East (PADDs I-IV) through property relaxation were found to be about 1.3 cents/liter (5 cents/gallon) in January 1, 1981 dollars between 1990 and 2010. However, the savings from property relaxation were all obtained within the range of current Jet A specifications, so there is no financial incentive to relax Jet A fuel specifications in the East. In the West (PADD V) the potential cost savings from lowering fuel quality were considerably greater than in the East. Cost savings from 2.7 to 3.7 cents/liter (10-14 cents/gallon) were found. In contrast to the East, on the West Coast a significant part of the savings was obtained through relaxation of the current Jet A fuel specifications.

Breton, T.↗

Survival of Potentially Pathogenic Human-Associated Bacteria in the Rhizosphere of Hydroponically Grown Wheat

Plants may serve as reservoirs for human-associated bacteria (H-AB) in long-term space missions containing bioregenerative life support systems. The current study examined the abilities of five human-associated potential pathogens, Pseudomonas aeruginosa, Pseudomonas cepacia, Staphylococcus aureus, Streptococcus pyogenes, and Escherichia coli, to colonize and grow in the rhizosphere of hydroponically grown wheat, a candidate crop for life support. All of these bacteria have been recovered from past NASA missions and present potential problems for future missions. The abilities of these organisms to adhere to the roots of axenic five-day-old wheat (Triticum aestivum L. cv. Yecora rojo) were evaluated by enumeration of the attached organisms after a one hour incubation of roots in a suspension (approximately 10(exp 8 cu/ml)) of the H-AB. Results showed that a greater percentage of P. aeruginosa cells adhered to the wheat roots than the other four H-AB. Similarly incubated seedlings were also grown under attempted axenic conditions for seven days to examine the potential of each organism to proliferate in the rhizosphere (root colonization capacity). P. cepacia and P. aeruginosa showed considerable growth. E. coli and S. aureus showed no significant growth, and S. pyogenes died off in the wheat rhizosphere. Studies examining the effects of competition on the survival of these microorganisms indicated that P. aeruginosa was the only organism that survived in the rhizosphere of hydroponically grown wheat in the presence of different levels of microbial competition.

Morales, Anabelle↗

Mobile Device Application for Monitoring Cyanobacteria Harmful Algal Blooms Using Sentinel-3 Satellite Ocean and Land Colour Instruments

Cyanobacterial harmful algal blooms (cyanoHAB) cause human and ecological health problems in lakes worldwide. The timely distribution of satellite-derived cyanoHAB data is necessary for adaptive water quality management and for targeted deployment of water quality monitoring resources. Software platforms that permit timely, useful, and cost-effective delivery of information from satellites are required to help managers respond to cyanoHABs. The Cyanobacteria Assessment Network (CyAN) mobile device application (app) uses data from the European Space Agency Copernicus Sentinel-3 satellite Ocean and Land Colour Instrument (OLCI) in near real-time to make initial water quality assessments and quickly alert managers to potential problems and emerging threats related to cyanobacteria. App functionality and satellite data were validated with 25 state health advisories issued in 2017. The CyAN app provides water quality managers with a user-friendly platform that reduces the complexities associated with accessing satellite data to allow fast, efficient, initial assessments across lakes.

Harmful Algal Bloom↗

A study of the response of nonlinear springs

The various phases to developing a methodology for studying the response of a spring-reinforced arch subjected to a point load are discussed. The arch is simply supported at its ends with both the spring and the point load assumed to be at midspan. The spring is present to off-set the typical snap through behavior normally associated with arches, and to provide a structure that responds with constant resistance over a finite displacement. The various phases discussed consist of the following: (1) development of the closed-form solution for the shallow arch case; (2) development of a finite difference analysis to study (shallow) arches; and (3) development of a finite element analysis for studying more general shallow and nonshallow arches. The two numerical analyses rely on a continuation scheme to move the solution past limit points, and to move onto bifurcated paths, both characteristics being common to the arch problem. An eigenvalue method is used for a continuation scheme. The finite difference analysis is based on a mixed formulation (force and displacement variables) of the governing equations. The governing equations for the mixed formulation are in first order form, making the finite difference implementation convenient. However, the mixed formulation is not well-suited for the eigenvalue continuation scheme. This provided the motivation for the displacement based finite element analysis. Both the finite difference and the finite element analyses are compared with the closed form shallow arch solution. Agreement is excellent, except for the potential problems with the finite difference analysis and the continuation scheme. Agreement between the finite element analysis and another investigator's numerical analysis for deep arches is also good.

Hyer, M. W.↗

Shuttle orbiter Ku-band radar/communications system design evaluation: High gain antenna/widebeam horn

The physical characteristics of the high gain antenna reflector and feed elements are described. Deficiencies in the sum feed are discussed, and lack of atmospheric venting is posed as a potential problem area. The measured RF performance of the high gain antenna is examined and the high sidelobe levels measured are related to the physical characteristics of the antenna. An examination of the attributes of the feed which might be influenced by temperature extremes shows that the antenna should be insensitive to temperature variations. Because the feed support bipod structure is considered a significant contributor to the high sidelobe levels measured in the azimuth plane, pod relocation, material changes, and shaping are suggested as improvements. Alternate feed designs are presented to further improve system performance. The widebeam horn and potential temperature effects due to the polarizer are discussed as well as in the effects of linear polarization on TDRS acquisition, and the effects of circular polarization on radar sidelobe avoidance. The radar detection probability is analyzed as a function of scan overlap and target range.

Iwasaki, R.↗

Deposition and material response from Mach 0.3 burner rig combustion of SRC 2 fuels

Collectors at 1173K (900 C) were exposed to the combustion products of a Mach 0.3 burner rig fueled with various industrial turbine liquid fuels from solvent refined coals. Four fuels were employed: a naphtha, a light oil, a wash solvent and a mid-heavy distillate blend. The response of four superalloys (IN-100, U 700, IN 792 and M-509) to exposure to the combustion gases from the SRC-2 naphtha and resultant deposits was also determined. The SRC-2 fuel analysis and insights obtained during the combustion experience are discussed. Particular problems encountered were fuel instability and reactions of the fuel with hardware components. The major metallic elements which contributed to the deposits were copper, iron, chromium, calcium, aluminum, nickel, silicon, titanium, zinc, and sodium. The deposits were found to be mainly metal oxides. An equilibrium thermodynamic analysis was employed to predict the chemical composition of the deposits. The agreement between the predicted and observed compounds was excellent. No hot corrosion was observed. This was expected because the deposits contained very little sodium or potassium and consisted mainly of the unreactive oxides. However, the amounts of deposits formed indicated that fouling is a potential problem with the use of these fuels.

Santoro, G. J.↗

Impact of future fuel properties on aircraft engines and fuel systems

From current projections of the availability of high-quality petroleum crude oils, it is becoming increasingly apparent that the specifications for hydrocarbon jet fuels may have to be modified. The problems that are most likely to be encountered as a result of these modifications relate to engine performance, component durability and maintenance, and aircraft fuel-system performance. The effect on engine performance will be associated with changes in specific fuel consumption, ignition at relight limits, at exhaust emissions. Durability and maintenance will be affected by increases in combustor liner temperatures, carbon deposition, gum formation in fuel nozzles, and erosion and corrosion of turbine blades and vanes. Aircraft fuel-system performance will be affected by increased deposits in fuel-system heat exchangers and changes in the pumpability and flowability of the fuel. The severity of the potential problems is described in terms of the fuel characteristics most likely to change in the future. Recent data that evaluate the ability of current-technology aircraft to accept fuel specification changes are presented, and selected technological advances that can reduce the severity of the problems are described and discussed.

Rudey, R. A.↗

Measurements of the Ionization Coefficient of Simulated Iron Micrometeoroids

The interpretation of meteor radar observations has remained an open problem for decades. One of the most critical parameters to establish the size of an incoming meteoroid from radar echoes is the ionization coefficient, beta, which still remains poorly known. Here we report on new experiments to simulate micrometeoroid ablation in laboratory conditions to measure beta for iron particles impacting N2, air,CO2, and He gases. This new data set is compared to previous laboratory data where we find agreement except for He and air impacts greater than 30 kms. We calibrate the Jones model of beta(v) and provide fit parameters to these gases and find agreement with all gases except CO2 and high-speed air impacts where we observe beta(sub air) greater than 1 for velocities greater than 70 kms. These data therefore demonstrate potential problems with using the Jones model for CO2 atmospheres as well as for high-speed meteors on Earth.

Thomas, Evan↗

Sensitivity Study for Sensor Optical and Electric Crosstalk Based on Spectral Measurements: An Application to Developmental Sensors Using Heritage Sensors Such As MODIS

The process of developing new sensors for space flight frequently builds upon the designs and experience of existing heritage space flight sensors. Frequently in the development and testing of new sensors, problems are encountered that pose the risk of serious impact on successful retrieval of geophysical products. This paper describes an approach to assess the importance of optical and electronic cross-talk on retrieval of geophysical products using new MODIS-like sensors through the use of MODIS data sets. These approaches may be extended to any sensor characteristic and any sensor where that characteristic may impact the Level 1 products so long as validated geophysical products are being developed from the heritage sensor. In this study, a set of electronic and/or optical cross-talk coefficients are postulated. These coefficients are sender-receiver influence coefficients and represent a sensor signal contamination on any detector on a focal plane when another band's detectors on that focal plane are stimulated with a monochromatic light. The approach involves using the postulated cross-talk coefficients on an actual set of MODIS data granules. The original MODIS data granules and the cross-talk impacted granules are used with validated geophysical algorithms to create the derived products. Comparison of the products produced with the original and cross-talk impacted granules indicates potential problems, if any, with the characteristics of the developmental sensor that are being studied.

Butler, James J.↗

Investigating the Simulink Auto-Coding Process

Model based program design is the most clear and direct way to develop algorithms and programs for interfacing with hardware. While coding "by hand" results in a more tailored product, the ever-growing size and complexity of modern-day applications can cause the project work load to quickly become unreasonable for one programmer. This has generally been addressed by splitting the product into separate modules to allow multiple developers to work in parallel on the same project, however this introduces new potentials for errors in the process. The fluidity, reliability and robustness of the code relies on the abilities of the programmers to communicate their methods to one another; furthermore, multiple programmers invites multiple potentially differing coding styles into the same product, which can cause a loss of readability or even module incompatibility. Fortunately, Mathworks has implemented an auto-coding feature that allows programmers to design their algorithms through the use of models and diagrams in the graphical programming environment Simulink, allowing the designer to visually determine what the hardware is to do. From here, the auto-coding feature handles converting the project into another programming language. This type of approach allows the designer to clearly see how the software will be directing the hardware without the need to try and interpret large amounts of code. In addition, it speeds up the programming process, minimizing the amount of man-hours spent on a single project, thus reducing the chance of human error as well as project turnover time. One such project that has benefited from the auto-coding procedure is Ramses, a portion of the GNC flight software on-board Orion that has been implemented primarily in Simulink. Currently, however, auto-coding Ramses into C++ requires 5 hours of code generation time. This causes issues if the tool ever needs to be debugged, as this code generation will need to occur with each edit to any part of the program; additionally, this is lost time that could be spent testing and analyzing the code. This is one of the more prominent issues with the auto-coding process, and while much information is available with regard to optimizing Simulink designs to produce efficient and reliable C++ code, not much research has been made public on how to reduce the code generation time. It is of interest to develop some insight as to what causes code generation times to be so significant, and determine if there are architecture guidelines or a desirable auto-coding configuration set to assist in streamlining this step of the design process for particular applications. To address the issue at hand, the Simulink coder was studied at a foundational level. For each different component type made available by the software, the features, auto-code generation time, and the format of the generated code were analyzed and documented. Tools were developed and documented to expedite these studies, particularly in the area of automating sequential builds to ensure accurate data was obtained. Next, the Ramses model was examined in an attempt to determine the composition and the types of technologies used in the model. This enabled the development of a model that uses similar technologies, but takes a fraction of the time to auto-code to reduce the turnaround time for experimentation. Lastly, the model was used to run a wide array of experiments and collect data to obtain knowledge about where to search for bottlenecks in the Ramses model. The resulting contributions of the overall effort consist of an experimental model for further investigation into the subject, as well as several automation tools to assist in analyzing the model, and a reference document offering insight to the auto-coding process, including documentation of the tools used in the model analysis, data illustrating some potential problem areas in the auto-coding process, and recommendations on areas or practices in the current Ramses model that should be further investigated. Several skills were required to be built up over the course of the internship project. First and foremost, my Simulink skills have improved drastically, as much of my experience had been modeling electronic circuits as opposed to software models. Furthermore, I am now comfortable working with the Simulink Auto-coder, a tool I had never used until this summer; this tool also tested my critical thinking and C++ knowledge as I had to interpret the C++ code it was generating and attempt to understand how the Simulink model affected the generated code. I had come into the internship with a solid understanding of Matlab code, but had done very little in using it to automate tasks, particularly Simulink tasks; along the same lines, I had rarely used shell script to automate and interface with programs, which I gained a fair amount of experience with this summer, including how to use regular expression. Lastly, soft-skills are an area everyone can continuously improve on; having never worked with NASA engineers, which to me seem to be a completely different breed than what I am used to (commercial electronic engineers), I learned to utilize the wealth of knowledge present at JSC. I wish I had come into the internship knowing exactly how helpful everyone in my branch would be, as I would have picked up on this sooner. I hope that having gained such a strong foundation in Simulink over this summer will open the opportunity to return to work on this project, or potentially other opportunities within the division. The idea of leaving a project I devoted ten weeks to is a hard one to cope with, so having the chance to pick up where I left off sounds appealing; alternatively, I am interested to see if there are any opening in the future that would allow me to work on a project that is more in-line with my research in estimation algorithms. Regardless, this summer has been a milestone in my professional career, and I hope this has started a long-term relationship between JSC and myself. I really enjoy the thought of building on my experience here over future summers while I work to complete my PhD at Missouri University of Science and Technology.

Gualdoni, Matthew J.↗

Handling qualities and structural characteristics of the hingeless-rotor helicopter

Several advantages and potential problem areas associated with the hingeless-rotor helicopter are discussed. The extent to which two of the advantages - increased control and damping moments - can be obtained with the hingeless-rotor helicopter is established. The upper limit on the available control and damping moments is associated with the excessive gyroscopic coupling that is obtained with heavy rotor blades. The poten­tial problem areas identified include a structural mode of oscillation very similar to that of a pendulum, which causes undesirably large roll accelera­tions under certain flight conditions, and large cyclic chordwise bending moments that occur during severe maneuvers (the primary structural problem of concern). Solutions are proposed which should eliminate future concern with these problems.

HELICOPTER↗

Establishment of design criteria for acceptable failure modes and fail safe considerations for the space shuttle structural system

Investigations of fatigue life, and safe-life and fail-safe design concepts as applied to space shuttle structure are summarized. The results are evaluated to select recommended structural design criteria to provide assurance that premature failure due to propagation of undetected crack-like defects will not occur during shuttle operational service. The space shuttle booster, GDC configuration B-9U, is selected as the reference vehicle. Structural elements used as basis of detail analyses include wing spar caps, vertical stabilizer skins, crew compartment skin, orbiter support frame, and propellant tank shell structure. Fatigue life analyses of structural elements are performed to define potential problem areas and establish upper limits of operating stresses. Flaw growth analyses are summarized in parametric form over a range of initial flaw types and sizes, operating stresses and service life requirements. Service life of 100 to 500 missions is considered.

Westrup, R. W.↗

Liquid-propellant dynamics and suppression

Technology related to liquid-propellant interactions with space shuttle vehicles is reviewed. Potential problems unique to the shuttle include liquid-structure interactions resulting from coupled lateral and longitudinal deformations, traveling wave phenomena at shallow propellant levels, and liquid impact during abort, staging, or docking. Technology efforts to define the slosh dynamics under shuttle operating conditions are described with emphasis on analytical representations of the liquid by finite-element and marker-and-cell methods. In addition, slosh suppression is discussed and includes baffle damping and pressure loads for tanks fitted with multiple baffles both above and below the undisturbed liquid surface.

Stephens, D. G.↗

A high-speed photographic system for flow visualization in a steam turbine

A photographic system was designed to visualize the moisture flow in a steam turbine. Good performance of the system was verified using dry turbine mockups in which an aerosol spray simulated, in a rough way, the moisture flow in the turbine. Borescopes and fiber-optic light tubes were selected as the general instrumentation approach. High speed motion-picture photographs of the liquid flow over the stator blade surfaces were taken using stroboscopic lighting. Good visualization of the liquid flow was obtained. Still photographs of drops in flight were made using short duration flash sources. Drops with diameters as small as 30 micrometers (0.0012 in.) could be resolved. In addition, motion pictures of a spray of water simulating the spray off the rotor blades and shrouds were taken at normal framing rates. Specially constructed light tubes containing small tungsten-halogen lamps were used. Sixteen millimeter photography was used in all cases. Two potential problems resulting from the two-phase turbine flow (attenuation and scattering of light by the fog present and liquid accumulation on the borescope mirrors) were taken into account in the photographic system design but not evaluated experimentally.

Barna, G. J.↗

A study to determine the applicability of noise abatement approach procedures to McDonnell Douglas Aircraft

Analyses of McDonnell Douglas DC-8, DC-9, and DC-10 jet transports were conducted to investigate the applicability of two segment approach noise abatement procedures to these airplanes. All models had the required glide slope capability at the certified landing flap settings. The DC-8 models would probably be limited to an upper segment glide slope of 5.5 degrees and would probably not be suitable for the two segment procedure in icing conditions. The DC-8 would not be compatible with this procedure at a reduced landing flap setting. The feasibility of installing a two segment approach system in the Douglas-built fleet of commercial jet transports from a hardware viewpoint is discussed. The candidate system consists of a two segment computer plus the necessary peripheral equipment interfaced with the existing autopilot and associated avionics. The required modifications and additions to existing equipment are described and the attendant costs estimated. Potential problems which may be encountered are also discussed.

Painter, J. A.↗