Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROCESS SOLUTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Efficient indium-tin-oxide free inverted organic solar cells based on aluminum-doped zinc oxide cathode and low-temperature aqueous solution processed zinc oxide electron extraction layer

Indium-tin-oxide (ITO) free inverted organic solar cells (IOSCs) based on aluminum-doped zinc oxide (AZO) cathode, low-temperature aqueous solution processed zinc oxide (ZnO) electron extraction layer, and poly(3-hexylthiophene-2, 5-diyl):[6, 6]-phenyl C{sub 61} butyric acid methyl ester blend were realized in this work. The resulted IOSC with ZnO annealed at 150 °C shows the superior power conversion efficiency (PCE) of 3.01%, if decreasing the ZnO annealing temperature to 100 °C, the obtained IOSC also shows a PCE of 2.76%, and no light soaking issue is observed. It is found that this ZnO film not only acts as an effective buffer layer but also slightly improves the optical transmittance of AZO substrates. Further, despite the relatively inferior air-stability, these un-encapsulated AZO/ZnO IOSCs show comparable PCEs to the referenced ITO/ZnO IOSCs, which demonstrates that the AZO cathode is a potential alternative to ITO in IOSCs. Meanwhile, this simple ZnO process is compatible with large area deposition and plastic substrates, and is promising to be widely used in IOSCs and other relative fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Solution-processed high-performance colloidal quantum dot tandem photodetectors on flexible substrates

We report a high-performance colloidal quantum dot (CQD)-based near-infrared tandem photodetector fabricated on flexible substrates via solution-processed method. The tandem photodetector on poly(ethylene terephthalate) substrates exhibited low dark current and high detectivities over ∼8.8 × 10{sup 11} Jones at near infrared range at −0.5 V bias and over ∼10{sup 13} Jones near 0 bias. The critical bend radii of ∼8 mm and ∼3 mm have been demonstrated for tensile and compressive bending, respectively. The performance of photodetectors remains stable under mechanical stress, making PbSe CQD material a promise candidate for flexible infrared sensing applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2014

Improvement of bias-stability in amorphous-indium-gallium-zinc-oxide thin-film transistors by using solution-processed Y{sub 2}O{sub 3} passivation

We demonstrate back channel improvement of back-channel-etch amorphous-indium-gallium-zinc-oxide (a-IGZO) thin-film transistors by using solution-processed yttrium oxide (Y{sub 2}O{sub 3}) passivation. Two different solvents, which are acetonitrile (35%) + ethylene glycol (65%), solvent A and deionized water, solvent B are investigated for the spin-on process of the Y{sub 2}O{sub 3} passivation—performed after patterning source/drain (S/D) Mo electrodes by a conventional HNO{sub 3}-based wet-etch process. Both solvents yield devices with good performance but those passivated by using solvent B exhibit better light and bias stability. Presence of yttrium at the a-IGZO back interface, where it occupies metal vacancy sites, is confirmed by X-ray photoelectron spectroscopy. The passivation effect of yttrium is more significant when solvent A is used because of the existence of more metal vacancies, given that the alcohol (65% ethylene glycol) in solvent A may dissolve the metal oxide (a-IGZO) through the formation of alkoxides and water.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Interfacial degradation effects of aqueous solution-processed molybdenum trioxides on the stability of organic solar cells evaluated by a differential method

The authors investigate the influence of two hole interfacial materials poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) and aqueous solution-processed MoO{sub 3} (sMoO{sub 3}) on cell stability. sMoO{sub 3}-based device demonstrated obviously improved stability compared to PEDOT:PSS-based one. Current-voltage characteristics analysis is carried out to investigate the effect of the hole interfacial layers on the cell stability. The formation of additional trap states at the interfaces between the hole interfacial layer and the active layer in degraded devices is verified by a differential method. Improved cell stability is attributed to a relatively stable sMoO{sub 3} interfacial layer compared to PEDOT:PSS by comparing their different trap states distributions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Tandem Solar Cells from Solution-Processed CdTe and PbS Quantum Dots Using a ZnTe–ZnO Tunnel Junction

Here, we developed a monolithic CdTe-PbS tandem solar cell architecture in which both the CdTe and PbS absorber layers are solution-processed from nanocrystal inks. Due to their tunable nature, PbS quantum dots (QDs), with a controllable band gap between 0.4 and ~1.6 eV, are a promising candidate for a bottom absorber layer in tandem photovoltaics. In the detailed balance limit, the ideal configuration of a CdTe (E g = 1.5 eV)-PbS tandem structure assumes infinite thickness of the absorber layers and requires the PbS band gap to be 0.75 eV to theoretically achieve a power conversion efficiency (PCE) of 45%. But, modeling shows that by allowing the thickness of the CdTe layer to vary, a tandem with efficiency over 40% is achievable using bottom cell band gaps ranging from 0.68 and 1.16 eV. In a first step toward developing this technology, we explore CdTe-PbS tandem devices by developing a ZnTe-ZnO tunnel junction, which appropriately combines the two subcells in series. Furthermore, we examine the basic characteristics of the solar cells as a function of layer thickness and bottom-cell band gap and demonstrate open-circuit voltages in excess of 1.1 V with matched short circuit current density of 10 mA/cm 2 in prototype devices.

14 SOLAR ENERGY↗
DOE OSTI2014

Chemiresistive gas sensors employing solution-processed metal oxide quantum dot films

We report low-temperature chemiresistive gas sensors based on tin oxide colloidal quantum dots (CQDs), in which the benefits of CQDs such as extremely small crystal size, solution-processability, and tunable surface activity are exploited to enhance the gas-sensing effect. The sensor fabrication is simply employing spin-coating followed by a solid-state ligand exchange treatment at room temperature in air ambient. The optimal gas sensor exhibited rapid and significant decrease in resistance upon H{sub 2}S gas exposure when operated at 70 °C, and it was fully recoverable upon gas release. We observed a power law correlation between the sensor response and H{sub 2}S gas concentration, and the sensing mechanism was discussed using the completely depletion model with a flat band diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Low-cost copper complexes as p-dopants in solution processable hole transport layers

We demonstrate the usage of the Lewis-acidic copper(II)hexafluoroacetylacetonate (Cu(hfac){sub 2}) and copper(II)trifluoroacetylacetonate (Cu(tfac){sub 2}) as low-cost p-dopants for conductivity enhancement of solution processable hole transport layers based on small molecules in organic light emitting diodes (OLEDs). The materials were clearly soluble in mixtures of environmentally friendly anisole and xylene and spin-coated under ambient atmosphere. Enhancements of two and four orders of magnitude, reaching 4.0 × 10{sup −11} S/cm with a dopant concentration of only 2 mol% Cu(hfac){sub 2} and 1.5 × 10{sup −9} S/cm with 5 mol% Cu(tfac){sub 2} in 2,2′,7,7′-tetra(N,N-ditolyl)amino-9,9-spiro-bifluorene (spiro-TTB), respectively, were achieved. Red light emitting diodes were fabricated with reduced driving voltages and enhanced current and power efficiencies (8.6 lm/W with Cu(hfac){sub 2} and 5.6 lm/W with Cu(tfac){sub 2}) compared to the OLED with undoped spiro-TTB (3.9 lm/W). The OLED with Cu(hfac){sub 2} doped spiro-TTB showed an over 8 times improved LT{sub 50} lifetime of 70 h at a starting luminance of 5000 cd/m{sup 2}. The LT{sub 50} lifetime of the reference OLED with PEDOT:PSS was only 8 h. Both non-optimized OLEDs were operated at similar driving voltage and power efficiency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Photo-Crosslinkable Naphthalene Diimide Polymer for Solution-Processed n – i – p Perovskite Solar Cells

We copolymerize a norbornene monomer bearing a pendant naphthalene diimide with a norbornene bearing a cinnamate pendant moiety to synthesize a crosslinkable electron-transporting polymer and study its use in solution-processed n–i–p perovskite solar cells. The crosslinked material exhibits over 90% transparency in the visible region and higher thermal stability (>300 °C) and lower surface energy than the corresponding homopolymer of the naphthalene diimide functionalized norbornene. Coating an ITO surface with the photo-crosslinked copolymer yields a slightly lower work function than homopolymer-coated ITO. We show that the morphologies of the perovskite films deposited on both polymers are similar (~300 nm features) based upon scanning electron microscopy. Our solar-cell device results show that the crosslinked naphthalene diimide polymer gives a higher open-circuit voltage (1.08 vs 1.05 V), fill factor (average 64.43 vs 58.77%), and stabilized power conversion efficiency (12.28 vs 10.33%) compared to its non-crosslinked homopolymer counterpart, as well as reduced hysteresis. As a result, we attribute the improved performance to decreased work function, reduced nonradiative recombination, and higher shunt resistance.

14 SOLAR ENERGY↗
DOE OSTI2014

Low-voltage and hysteresis-free organic thin-film transistors employing solution-processed hybrid bilayer gate dielectrics

This study presents a promising approach to realize low-voltage (<3 V) organic thin-film transistors (OTFTs) exhibiting improved electrical and optical stability. Such device performance results from the use of solution-processed hybrid bilayer gate dielectrics consisting of zirconium dioxide (high-k dielectric) and amorphous fluoropolymer, CYTOP{sup ®} (low-k dielectric). Employing a very thin amorphous fluoropolymer film reduces interfacial defect-states by repelling water molecules and other aqueous chemicals from an organic semiconductor active layer due to the hydrophobic surface-property. The chemically clean interface, stemming from decrease in density of trap states improves all the key device properties such as field-effect mobility, threshold voltage, and sub-threshold swing. Furthermore, degradation by electrical bias-stress and photo-induced hysteresis were suppressed in OTFTs employing hybrid bilayer gate dielectrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Scalable Solution-Processed Electrolyte Membranes with Optimized Microstructure for High-Performance Protonic Ceramic Electrochemical Cells

Proton-conducting electrochemical cells (PCECs) are promising for efficient hydrogen production, but achieving dense, uniform, thin electrolyte layers remains a key challenge, particularly for scalable fabrication. Here, we present a solution-processed deposition approach with a mechanistically optimized slurry for uniform electrolyte formation. By tailoring particle size distribution, solid loading, and solvent/additive balance, we regulated wetting behavior and evaporation kinetics of the electrolyte slurry to promote homogeneous electrolyte particle packing. These features facilitate tight grain boundary contact and early stage neck growth during sintering, eliminating residual porosity, and improving mechanical integrity. The resulting ∼15 μm thick electrolyte shows high density, strong electrode adhesion, and stable interfaces outperforming the previously reported spray-based fabricated electrolyte by about 31% at 600 °C in FC mode. Single cells deliver 0.962 W cm –2 at 600 °C in fuel cell mode and 1.31 A cm –2 at 1.3 V in electrolysis mode, maintaining robust performance over 100 h with negligible degradation (≤0.02% h –1 ) in each mode. Scale-up to 2.5 cm diameter substrates confirmed reproducible densification and geometric stability. This work demonstrates a cost-effective, scalable route where control over particle-fluid interactions and drying dynamics enables a superior electrolyte microstructure and high PCEC performance.

dense microstructure↗
DOE OSTI2017

Isomeric Effects of Solution Processed Ladder‐Type Non‐Fullerene Electron Acceptors

The role of electronic structure and thin film morphology is investigated in determining charge transfer and electron coupling due to orbital interactions in two isomeric non‐fullerene acceptors with the structure of acceptor‐donor‐acceptor. Differences are found in the distribution of electron density of the highest occupied molecular and lowest unoccupied molecular orbitals, whose bonding interactions result in improved intermolecular interactions and hence, molecular stacking. When combined with a large band gap polymer donor, solution‐processed organic photovoltaic cells are demonstrated with power conversion efficiencies as high as 10.5 ± 0.4%, and with absorption extending to wavelengths of 800 nm. Due to strong internal organization driven by the planar molecular structure and strong intermolecular interactions, no post‐deposition processing such as solvent vapor or thermal annealing is required. To our knowledge, these are the highest efficiencies for as‐cast solution‐based devices employing non‐fullerene acceptors.

Li, Yongxi↗
DOE OSTI2015

Polymer/metal oxide hybrid dielectrics for low voltage field-effect transistors with solution-processed, high-mobility semiconductors

Transistors for future flexible organic light-emitting diode (OLED) display backplanes should operate at low voltages and be able to sustain high currents over long times without degradation. Hence, high capacitance dielectrics with low surface trap densities are required that are compatible with solution-processable high-mobility semiconductors. Here, we combine poly(methyl methacrylate) (PMMA) and atomic layer deposition hafnium oxide (HfO{sub x}) into a bilayer hybrid dielectric for field-effect transistors with a donor-acceptor polymer (DPPT-TT) or single-walled carbon nanotubes (SWNTs) as the semiconductor and demonstrate substantially improved device performances for both. The ultra-thin PMMA layer ensures a low density of trap states at the semiconductor-dielectric interface while the metal oxide layer provides high capacitance, low gate leakage and superior barrier properties. Transistors with these thin (≤70 nm), high capacitance (100–300 nF/cm{sup 2}) hybrid dielectrics enable low operating voltages (<5 V), balanced charge carrier mobilities and low threshold voltages. Moreover, the hybrid layers substantially improve the bias stress stability of the transistors compared to those with pure PMMA and HfO{sub x} dielectrics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Solution-processable glass LiI-Li 4 SnS 4 superionic conductors for all-solid-state Li-ion batteries

The new, highly conductive (4.1 × 10 –4 S cm –1 at 30 °C), highly deformable, and dry-air-stable glass 0.4LiI-0.6Li 4 SnS 4 is prepared using a homogeneous methanol solution. Furthermore, the solution process enables the wetting of any exposed surface of the active materials with highly conductive solidified electrolytes (0.4LiI-0.6Li 4 SnS 4 ), resulting in considerable improvements in electrochemical performances of these electrodes over conventional mixture electrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Solution-Processed n-Type Graphene Doping for Cathode in Inverted Polymer Light-Emitting Diodes

n-Type doping with (4-(1,3-dimethyl-2,3-dihydro-1H-benzoimidazol-2-yl)phenyl) dimethylamine (N-DMBI) reduces a work function (WF) of graphene by ~0.45 eV without significant reduction of optical transmittance. Solution process of N-DMBI on graphene provides effective n-type doping effect and air-stability at the same time. Although neutral N-DMBI act as an electron receptor leaving the graphene p-doped, radical N-DMBI acts as an electron donator leaving the graphene n-doped, which is demonstrated by density functional theory. We also verify the suitability of N-DMBI-doped n-type graphene for use as a cathode in inverted polymer light-emitting diodes (PLEDs) by using various analytical methods. Inverted PLEDs using a graphene cathode doped with N-DMBI radical showed dramatically improved device efficiency (~13.8 cd/A) than did inverted PLEDs with pristine graphene (~2.74 cd/A). Finally, N-DMBI-doped graphene can provide a practical way to produce graphene cathodes with low WF in various organic optoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Oligoether-Functionalized PEDOT: Combining an EDOT Backbone with Polar Side Chains for Solution Processability and High Electrical Conductivity

Conjugated polymers functionalized with oligoether (OE)-based side chains are a key class of materials for various organic electronic applications, including transparent electrodes, thermoelectrics, electrochromic displays, and electrochemical transistors. Herein, we report a highly soluble OE-functionalized poly(3,4-ethylenedioxythiophene) (PEDOT) homopolymer, prepared by direct (hetero)arylation polymerization, which allows solution processing to yield films with comparable redox properties to oxidatively polymerized PEDOT. This polymer, PEDOT(OE3), when optimally oxidatively doped, reaches among the highest electrical conductivities of any OE-functionalized polymer and is comparable to more synthetically complex OE-functionalized polymers. X-ray scattering and spectroscopy were utilized to rationalize the transport properties resulting from varying the doping level. Comparison of PEDOT(OE3) to a series of OE-functionalized dioxythiophenes with varying amounts of 3,4-ethylenedioxythiophene units allows for a deeper understanding of structure–property relationships through charge-transport models. Ultimately, PEDOT(OE3) is shown to be a material with exceptional charge-transport properties and is promising for various applications.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Robust resistive memory devices using solution-processable metal-coordinated azo aromatics

Non-volatile memories will play a decisive role in the next generation of digital technology. Flash memories are currently the key player in the field, yet they fail to meet the commercial demands of scalability and endurance. Resistive memory devices, and in particular memories based on low-cost, solution-processable and chemically tunable organic materials, are promising alternatives explored by the industry. However, to date, they have been lacking the performance and mechanistic understanding required for commercial translation. Here we report a resistive memory device based on a spin-coated active layer of a transition-metal complex, which shows high reproducibility (~350 devices), fast switching (≤30 ns), excellent endurance (~10 12 cycles), stability (>10 6 s) and scalability (down to ~60 nm 2 ). In situ Raman and ultraviolet–visible spectroscopy alongside spectroelectrochemistry and quantum chemical calculations demonstrate that the redox state of the ligands determines the switching states of the device whereas the counterions control the hysteresis. This insight may accelerate the technological deployment of organic resistive memories.

Goswami, Sreetosh↗
DOE OSTI2016

UMo Solutions Processing in La Hague Cold Crucible Induction Melter: the Feedback From the First Years of Operation - 16376

250 cubic meters of high-level liquid waste from reprocessed U-Mo-Sn-Al spent fuel, used in Gas Cooled Reactors (GCR), were produced during the mid-1960's at La Hague facility. These 'UMo' solutions are less radioactive than the current fission product concentrates coming from ongoing reprocessing activities, but are very rich in molybdenum and phosphorus whose contents make the molten glass quite corrosive and require a high-temperature glass formulation to obtain sufficiently high waste loading factors (12% in molybdenum oxide). Hence the use of the Cold Crucible Induction Melter (CCIM) technology to process such solutions has been deemed a good opportunity for AREVA to meet its performance expectations. In addition to being very corrosive, the UMo waste is quite challenging to process as the molybdenum has a strong tendency to stick in the calciner and causes clogging issues in off-gas treatment equipment. Therefore, the process and technological qualifications were deployed in order to address these specific issues. UMo solutions processing in the La Hague CCIM has started in January 2013 and is currently ongoing. During this period (from 2013 to 2015), many data have been collected to confirm the process parameters that were defined during the qualification of this innovating process. Even if some difficulties occurred, operations teams experience along with engineering and R and D support allowed managing them. This paper presents the start-up methodology and the feedback from the first years of UMo solutions processing with the CCIM technology at La Hague site. Lessons learned are presented with the difficulties encountered and the solutions implemented, emphasizing the benefits of a close integration between R and D, engineering and operations teams. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗