Search NASA⌕ Search

SEARCH · Search NASA

Results for “PS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Evaluation of PS 212 Coatings Under Boundary Lubrication Conditions with an Ester-based Oil to 300 C

High friction and wear of turbine engine components occur during high temperature excursions above the oxidation threshold of the liquid lubricant. This paper reports on research to study the use of a high temperature self lubricating coating, PS 212 for back-up lubrication in the event of failure of the liquid lubricant. Pin on disk tests were performed under dry and boundary-lubricated conditions at disk temperatures up to 300 C. The liquid lubricant was a formulated polyol ester qualified under MIL L-23699. At test temperatures above the oil's thermal degradation level, the use of PS 212 reduced wear, providing a back-up lubricant effect.

Sliney, Harold E.↗

Plasma Spray-Physical Vapor Deposition (PS-PVD) of Ceramics for Protective Coatings

In order to generate advanced multilayer thermal and environmental protection systems, a new deposition process is needed to bridge the gap between conventional plasma spray, which produces relatively thick coatings on the order of 125-250 microns, and conventional vapor phase processes such as electron beam physical vapor deposition (EB-PVD) which are limited by relatively slow deposition rates, high investment costs, and coating material vapor pressure requirements. The use of Plasma Spray - Physical Vapor Deposition (PS-PVD) processing fills this gap and allows thin (< 10 microns) single layers to be deposited and multilayer coatings of less than 100 microns to be generated with the flexibility to tailor microstructures by changing processing conditions. Coatings of yttria-stabilized zirconia (YSZ) were applied to NiCrAlY bond coated superalloy substrates using the PS-PVD coater at NASA Glenn Research Center. A design-of-experiments was used to examine the effects of process variables (Ar/He plasma gas ratio, the total plasma gas flow, and the torch current) on chamber pressure and torch power. Coating thickness, phase and microstructure were evaluated for each set of deposition conditions. Low chamber pressures and high power were shown to increase coating thickness and create columnar-like structures. Likewise, high chamber pressures and low power had lower growth rates, but resulted in flatter, more homogeneous layers

Harder, Bryan J.↗

Tracking Coastal Change in American Samoa By Mapping Local Vertical Land Motion with PS-InSAR

Characterizingdiverse contributionsto coastal land change is a key step to mitigating the effects ofrising sea levels that threaten coastal communities. This taskis particularly critical for small island communities in tectonically active regions, which are highlyvulnerableto the effects of sea level rise. We highlight here a case study to extract regional estimates of vertical land motion (VLM) over American Samoa, which in recent years has observedincreased nuisance flooding.Weusedpersistent scatterer Interferometric Synthetic Aperture Radar (PS-InSAR)to derive high-resolutionestimates of crustaldeformationinpopulated regions overTutuila Island from 2015 to 2021. While the area is small and highly vegetatedand poses challenges for InSAR, we wereable to construct a regional map of the estimated deformation ratein these areasandvalidate the time-series with alocal GPS station. Our preliminary results suggest that PS-InSAR has the ability to capture the local and regional deformation patterns, although further workis needed to compensate formore complexatmospheric effects, estimate error margins,and integrate ourresults intomodels of sea-level change that can be used local stakeholders

Stacey A Huang↗

X-ray bang-time and fusion reaction history at ~ps resolution using RadOptic detection

We report recent progress in the development of RadOptic detectors, radiation to optical converters, that rely upon x-ray absorption induced modulation of the optical refractive index of a semiconductor sensor medium to amplitude modulate an optical probe beam. The sensor temporal response is determined by the dynamics of the electron-hole pair creation and subsequent relaxation in the sensor medium. Response times of a few ps have been demonstrated in a series of experiments conducted at the LLNL Jupiter Laser Facility. This technology will enable x-ray bang-time and fusion burn-history measurements with {approx} ps resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Materials Data on Ga5(PS)3 by Materials Project

Ga5(PS)3 crystallizes in the orthorhombic Pmm2 space group. The structure is three-dimensional. there are three inequivalent Ga3+ sites. In the first Ga3+ site, Ga3+ is bonded to one P3- and three S2- atoms to form corner-sharing GaPS3 tetrahedra. The Ga–P bond length is 2.39 Å. There are one shorter (2.23 Å) and two longer (2.38 Å) Ga–S bond lengths. In the second Ga3+ site, Ga3+ is bonded to four P3- atoms to form corner-sharing GaP4 tetrahedra. There are two shorter (2.37 Å) and two longer (2.39 Å) Ga–P bond lengths. In the third Ga3+ site, Ga3+ is bonded to three P3- and one S2- atom to form corner-sharing GaP3S tetrahedra. All Ga–P bond lengths are 2.37 Å. The Ga–S bond length is 2.33 Å. There are two inequivalent P3- sites. In the first P3- site, P3- is bonded to four Ga3+ atoms to form corner-sharing PGa4 tetrahedra. In the second P3- site, P3- is bonded to four Ga3+ atoms to form corner-sharing PGa4 tetrahedra. There are two inequivalent S2- sites. In the first S2- site, S2- is bonded in a trigonal non-coplanar geometry to three Ga3+ atoms. In the second S2- site, S2- is bonded in a water-like geometry to two equivalent Ga3+ atoms.

36 MATERIALS SCIENCE↗

On the Viability of Using Autonomous Three-Component Nodal Geophones to Calculate Teleseismic Ps Receiver Functions with an Application to Old Faithful, Yellowstone

Recent advances in seismic data-acquisition technology paired with an increasing interest from the academic passive source seismological community have opened up new scientific targets and imaging possibilities, often referred to as Large-N experiments (large number of instruments). The success of these and other deployments has motivated individual researchers, as well as the larger seismological community, to invest in the next generation of nodal geophones. Although the new instruments have battery life and bandwidth limitations compared to broadband instruments, the relatively low deployment and procurement cost of these new nodal geophones provides an additional novel tool for researchers. In this paper, we explore the viability of using autonomous three-component nodal geophones to calculate teleseismic Ps receiver functions by comparison of co-located broadband stations and highlight some potential advantages with a dense nodal array deployed around the Upper Geyser basin in Yellowstone National Park. Two key findings from this example include (1) very dense nodal arrays can be used to image small-scale features in the shallow crust that typical broadband station spacing would alias, and (2) nodal arrays with a larger footprint could be used to image deeper features with greater or equal detail as typical broadband deployments but at a reduced deployment cost.

15 GEOTHERMAL ENERGY↗

Chemical and Electrochemical Characterization of Hot–Pressed Li 6 PS 5 Cl Solid State Electrolyte: Operating Pressure–Invariant High Ionic Conductivity

Sulfide solid state electrolytes (SSE) are among the most promising materials in the effort to replace liquid electrolytes, largely due to their comparable ionic conductivities. Among the sulfide SSEs, Argyrodites (Li 6 PS 5 X, X=Cl, Br, I) further stand out due to their high theoretical ionic conductivity (~1×10 –2 S cm –1 ) and interfacial stability against reactive metal anodes such as lithium. Generally, solid state electrolyte pellets are pressed from powder feedstock at room temperature, however, pellets fabricated by cold pressing consistently result in low bulk density and high porosity, facilitating interfacial degradation reactions and allowing dendrites to propagate through the pores and grain boundaries. Here, we demonstrate the mechanical and electrochemical implications of hot-pressing standalone LPSCl SSE pellets with near-theoretical ionic conductivity, superior cycling performance, and enhanced mechanical stability. X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and x-ray diffraction spectroscopy (XRD) analysis reveal no chemical changes to the Argyrodite surface after hot pressing up to 250°C. Furthermore, we use electrochemical impedance spectroscopy (EIS) to understand mechanical stability of Argyrodite SSE pellets as a function of externally applied pressure, demonstrating for the first time pressed standalone Argyrodite pellets with near-theoretical conductivities at external pressures below 14 MPa.

25 ENERGY STORAGE↗

Electrocatalytic Hydrogen Evolution and Hydrogen Oxidation with a Ni(PS) 2 Complex

Tetra-coordinate Ni II and Zn II complexes employing the PS chelates 2-(diphenylphosphanyl)benzenethiol (HL 1 ) and 2-(diisopropylphosphanyl)benzenethiol (HL 2 ) have been synthesized and characterized by spectroscopic, structural, and electrochemical methods. All complexes were screened for electrocatalytic activity for hydrogen evolution with acetic acid and hydrochloric acid and hydrogen oxidation in the presence of triethylamine. The nickel complex Ni(L 1 ) 2 (1) was found to reduce protons from external acids to generate hydrogen with a turnover frequency of 140 s–1 at an overpotential of 1.1 V and cleave dihydrogen using redox active base triethylamine (Et 3 N) with a turnover frequency of 23 s–1 at an overpotential of 0.33 V. Ni(L 2 ) 2 (3) was also found to be an active catalyst for dihydrogen oxidation, but inefficient for proton reduction due to inaccessible Ni (II/I) reduction in the potential window. Zn(L 1 ) 2 (2) and Zn(L 2 ) 2 (4) complexes were found to be inadequate for their electrocatalytic behaviour towards both the reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Side-Chain Nanophase Separation Broadens the Double-Gyroid Stability Window in PS–PODMA Diblock Copolymers

Expanding access to bicontinuous network phases in block copolymers remains an important challenge because the double gyroid (DG) phase is usually stable only within a narrow composition window in conventional diblock copolymers. Here, we show that poly(styrene-block-octadecyl methacrylate) (PS-b-PODMA) exhibits an unusually broad DG window. Small-angle X-ray scattering measurements across a wide composition range reveal lamellar and hexagonally packed cylindrical phases at higher polystyrene fractions. In contrast, the DG phase appears over 0.22 ≤ fPS ≤ 0.35, with DG/BCC and DG/HEX coexistence near fPS = 0.18 and 0.40, respectively. This broad DG window is much wider than those reported for neat diblock copolymers and is not readily explained by conformational asymmetry alone. Wide-angle X-ray scattering detects a characteristic signature of nanophase separation within the PODMA-rich domains, indicating that side-chain ordering introduces an additional internal length scale. These results suggest that hierarchical side-chain nanophase separation modifies packing frustration and curvature selection, thereby broadening DG stability and providing a new molecular design strategy for stabilizing complex network morphologies.

Seko, Tamio↗

A Critical Appraisal of NLO+PS Matching Methods

In this publication, uncertainties in and differences between the MC{at}NLO and POWHEG methods for matching next-to-leading order QCD calculations with parton showers are discussed. Implementations of both algorithms within the event generator SHERPA are employed to assess the impact on a representative selection of observables. In the MC{at}NLO approach a phase space restriction has been added to subtraction and parton shower, which allows to vary in a transparent way the amount of non-singular radiative corrections that are exponentiated. Effects on various observables are investigated, using the production of a Higgs boson in gluon fusion, with or without an associated jet, as a benchmark process. The case of H+jet production is presented for the first time in an NLO+PS matched simulation. Uncertainties due to scale choices and non-perturbative effects are explored in the production of W{sup {+-}} and Z bosons in association with a jet. Corresponding results are compared to data from the Tevatron and LHC experiments.

43 PARTICLE ACCELERATORS↗

Intercalation of stable organic radicals into layered inorganic host matrices: Preparation and structural characterization of Cd{sub 1-x}PS{sub 3}(metaMPYNN){sub 2x}

The radical cation 2-(3-N-methylpyridinium)-4,4,5,5-tetramethyl-4, 5-dihydro-1H-imidazol-1-oxyl-3-N-oxide (abbreviated as m-MPYNN) is successfully intercalated into the layered host structure CdPS{sub 3}. The reaction proceeds via an ion exchange reaction from methanol solutions containing the radical iodide salt, leading to materials described by the compositional formula Cd{sub 1-x}PS{sub 3}(metaMPYNN){sub 2x}. Detailed characterization of the intercalates by chemical analysis, X-ray powder diffraction, EPR, and NMR spectroscopy indicate that the maximum uptake corresponds to x=0.20; attempts to produce higher intercalated materials result in the formation of a side product with inferred composition CdI{sub 4}(metaMPYNN){sub 2}. Magnetic susceptibility measurements indicate CURIE-like behavior for x=0.13, while at higher intercalation levels antiferromagnetic coupling is observed. The magnetic properties may be linked to the orientation of the radical ions relative to the host layers, which is also found to depend on x. While for the low-intercalated regime (x=0.13) both a transversal intercalation with the N-O director pointing towards the layers, and a longitudinal orientation, with the long axis of the molecule pointing towards the layers are found, at larger x-values only the longitudinal orientation is present. {sup 1}H NMR chemical shifts indicate that the orientation greatly influences the molecular spin density distributions. Modern single and double resonance solid state NMR techniques have been introduced successfully to study the structural modifications of the host lattice and the details of the intermolecular guest/host interactions. Specifically the internuclear distance correlations extracted from selectively measured {sup 1}H-{sup 31}P magnetic dipole-dipole couplings via {sup 31}P/{sup 1}H rotational echo double resonance (REDOR) experiments allow important conclusions regarding the orientation of the guest species relative to the inorganic layers. - Graphical abstract: The orientation of a nitroxide radical relative to the CdPS{sub 3} layers in the corresponding intercalation compound is inferred from x-ray diffraction and solid state NMR spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of TiO{sub 2} nanoparticles by self-assembling reverse micelle cores of PS-b-PAA for functional textile applications

Highlights: • TiO{sub 2} nanoparticles were synthesized within poly(styrene)-b-poly(acrylic acid) micelles. • The copolymer solution including nano TiO{sub 2} was coated onto textile fabrics. • UV-protective factor of nano TiO{sub 2} coated fabrics was estimated as 50+. • Nano TiO{sub 2} coated fabrics was found to exhibit a high photocatalytic activity. - Abstract: Titanium dioxide (i.e., titanium(IV) oxide, TiO{sub 2}) nanoparticles have been fabricated using a copolymer templating technique in micellar solution of poly(styrene)-block-poly(acrylic acid), PS(10912)-b-PAA(4842) synthesized by atom transfer radical polymerization (ATRP). The size and morphology of the synthesized TiO{sub 2} nanoparticles have been characterized via TEM and XRD measurements. The average size of TiO{sub 2} nanoparticles was determined as 13 ± 3 and 13 ± 4 nm for titanium:copolymer ratios of 20:1 and 33:1, respectively. The copolymer solution including nano TiO{sub 2} particles has been coated onto textile fabrics to enhance their UV-blocking and self-cleaning properties. It has been determined that nano TiO{sub 2} coated textile fabrics have very good UV-blocking properties with 50+ of the ultraviolet protecting factor (UPF) and high photocatalytic efficiency with 69.2% of the photodegradation of methylene blue.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A sub-5 ps jitter time-to-digital converter ASIC with back-gate delay tuning in 22 nm CMOS

We present the design of a Time-to-Digital Converter (TDC) ASIC together with performance characterization results at cryogenic temperature (6-8 K), and at room temperature using emulated Low-Gain Avalanche Detector (LGAD) signals. The TDC design uses a two-step architecture with a ring-oscillator based counter and a Vernier delay line fine TDC. The TDC is implemented in an FD-SOI process, and back-gate tuning is used not only to correct threshold variation due to cryogenic operation, but also as a novel way to tune TDC delay elements with very little overhead. Using this technique, we demonstrate a design with very low power (0.5 mW) and area (0.003 mm 2 ). We present test results using the Fermilab Constant Fraction Discriminator (FCFD) ASIC to produce discriminated signals from an internal charge injection mechanism that mimics the waveform and signal amplitude of minimum ionizing particles impinging on LGAD sensors. We characterize the time precision of the full system and verify that the TDC ASIC contributes a negligible amount to the total system time precision, fully consistent with the expected jitter contribution of less than 5 ps. In conclusion, the results presented here demonstrate the utility of our TDC for applications in physics and quantum communications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

23 Na nuclear magnetic resonance study of yNa 2 S +(1-y)[xSiS 2 + (1-x)PS 5/2 ] glassy solid electrolytes

23 Na NMR spin lattice relaxation times, T 1 , and central linewidths were obtained for y Na 2 S +(1-y)[xSiS 2 + (1-x)PS 5/2 ] glassy solid electrolytes for two series of glasses, y=0.5 and 0.67, and x=0.1, 0.3, 0.5, 0.7, and 0.9. No pronounced mixed glass former effect in the activation energy was recorded within experimental uncertainty for either series of glasses. Energy barriers to sodium motion were calculated using the Anderson-Stuart model for the y=0.67 sample, and the results suggested that the energy barriers as a function of composition are strongly influenced by the dielectric constant of these glasses. DC Na + ion conductivity values calculated using NMR-derived correlation times, an available Na + ion site coordination number in the range z=3–4, and an energy cutoff determined from the critical percolation threshold, were in agreement with the increasing trend in the experimental values for the y=0.67 glasses. Using the same model, the conductivity values were calculated for the y=0.50 glasses, which have as yet to be measured, and these revealed a decreasing conductivity as x increased. Sodium NMR second moment studies showed that the cation spatial arrangement followed a homogeneous distribution for y=0.50 and 0.67 samples over most of the composition range, but deviated significantly away from this above a sodium concentration of 1.85 ×10 28 m -3 , implying a tendency for sodium to cluster under these conditions.

79 ASTRONOMY AND ASTROPHYSICS↗

Correlation of Structure and Fast Ion Conductivity in the Solid Solution Series Li 1+2 x Zn 1– x PS 4

Solid electrolytes are the foundation of all-solid-state batteries (ASSB) and have the potential to provide improved safety and higher energy density than existing liquid battery systems. In the important search for new lithium ion conductors with fast ionic conductivity and good mechanical properties, thiophosphates are a particularly promising class of materials. The first experimental elucidation of new lithium ion conductors in the Li 1+2x Zn 1-x PS 4 (LZPS) solid solution whose existence had been predicted by theory is reported in this paper. Using neutron and synchrotron x-ray powder diffraction together with electrical impedance, and Raman studies, we resolve their crystalline nature and correlate this with ionic conductivity upon increasing the lithium/zinc ratio. We demonstrate that the materials exhibit high experimental ionic conductivities - up to 8 × 10 -4 S·cm -1 - and show the nature of likely pathways for lithium ion conduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fe II Hexa N-Heterocyclic Carbene Complex with a 528 ps Metal-to-Ligand Charge-Transfer Excited-State Lifetime

In this paper, the iron carbene complex [Fe II (btz) 3 ](PF 6 ) 2 (where btz = 3,3'-dimethyl-1,1'-bis(p-tolyl)-4,4'-bis(1,2,3-triazol-5-ylidene)) has been synthesized, isolated, and characterized as a low-spin ferrous complex. It exhibits strong metal-to-ligand charge transfer (MLCT) absorption bands throughout the visible spectrum, and excitation of these bands gives rise to a 3 MLCT state with a 528 ps excited-state lifetime in CH 3 CN solution that is more than one order of magnitude longer compared with the MLCT lifetime of any previously reported Fe II complex. The low potential of the [Fe(btz) 3 ] 3+ /[Fe(btz) 3 ] 2+ redox couple makes the 3 MLCT state of [Fe II (btz) 3 ] 2+ a potent photoreductant that can be generated by light absorption throughout the visible spectrum. Finally, taken together with our recent results on the [Fe III (btz) 3 ] 3+ form of this complex, these results show that the Fe II and Fe III oxidation states of the same Fe(btz) 3 complex feature long-lived MLCT and LMCT states, respectively, demonstrating the versatility of iron N-heterocyclic carbene complexes as promising light-harvesters for a broad range of oxidizing and reducing conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Templated Self-Assembly of a PS- Branch -PDMS Bottlebrush Copolymer

The self-assembly of block copolymers with novel architectures offers tremendous opportunities in nanoscale patterning and fabrication. Here, the thin film morphology, annealing kinetics, and topographical templating of an unconventional Janus-type “PS-branch-PDMS” bottlebrush copolymer (BBCP) is described. In the Janus-type BBCP, each segment of the backbone connects two immiscible sidechain blocks, instead of having each type of sidechain at one end of the molecule as in a conventional BBCP. Thin films of a Janus-type BBCP with M n = 609 kg/mol exhibited 22 nm period cylindrical microdomains with long-range order under solvent vapor annealing, and the effects of as-cast film thickness, solvent vapor pressure, and composition of the binary mixture of solvent vapors are described. The dynamic self-assembly process was characterized using in-situ grazing-incidence x-ray scattering. Templated selfassembly of the BBCP within lithographically patterned substrates was demonstrated, showing distinct pattern orientation and dimensions that differ from conventional BCPs. Self-consistent field theory is used to elucidate details of the templated self-assembly behavior within confinement.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Importance of multimodal characterization and influence of residual Li 2 S impurity in amorphous Li 3 PS 4 inorganic electrolytes

Amorphous Li 3 PS 4 (LPS) solid-state electrolytes are promising for energy-dense lithium metal batteries. LPS glass, synthesized from a 3:1 mol ratio of Li 2 S and P 2 S 5 , has high ionic conductivity and can be synthesized by ball milling or solution processing. Ball milling has been attractive because it provides the easiest route to access amorphous LPS with a conductivity of 3.5 × 10 –4 S cm –1 (20 °C). However, achieving the complete reaction of precursors via ball milling can be difficult, and most literature reports use X-ray diffraction (XRD) or Raman spectroscopy to confirm sample purity, both of which have limitations. Furthermore, the effect of residual precursors on ionic conductivity and lithium metal cycling is unknown. In this work, we illustrate the importance of multimodal characterization to determine LPS phase and chemical purity. To determine the residual Li 2 S content in LPS, we show that (1) XRD and 31 P solid state nuclear magnetic resonance (ssNMR) are insufficient and (2) Raman loses sensitivity at concentrations below 12 mol% Li 2 S. Most importantly, we show that 7 Li ssNMR is highly sensitive. Using 7 Li ssNMR, we investigate the effect of ball milling parameters and develop a robust and highly reproducible procedure for pure LPS synthesis. We find that as the residual Li 2 S precursor content increases, LPS conductivity decreases and lithium metal batteries exhibit higher overpotentials and poor cycle life. Furthermore, our work reveals the importance of multimodal characterization techniques for amorphous solid-state electrolyte characterization and will enable better synthetic strategies for highly conductive electrolytes for efficient energy-dense solid-state lithium metal batteries.

25 ENERGY STORAGE↗