Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Numerical analysis of gas exhaust in Wendelstein 7-X using the direct simulation Monte Carlo method

The present work is focused on a 3D numerical assessment of the Wendelstein 7-X (W7-X) particle exhaust. For all the numerical simulations the direct simulation Monte Carlo solver of the DIVGAS workflow, has been employed. The complex 3D geometry of the sub-divertor region includes the pumping gap panel, supporting structures, cooling pipes as well as the cryo-vacuum pump. All the considered flow simulations correspond to the Standard magnetic configuration of W7-X. The main conclusions, which can be extracted from the present numerical analysis could be summarized as follows; The coupling between EMC3-EIRENE and DIVGAS, which considers the fact that the incoming neutral particle flux at the sub-divertor is based on realistic plasma background, has been demonstrated. Three plasma scenarios have been considered, for which is clearly seen that by increasing the heating power, the neutral pressure as well as the resulting pumping efficiency is increased. The obtained numerical results of the neutral pressure in the sub-divertor lie within a more general scan matrix, which assumes a wider range of incoming particle flux, namely 10 19 –10 24 (s −1 ). It has been observed that, the sub-divertor neutral pressure is proportional to the incoming neutral particle flux, with the effective pumping speed to be a constant of proportionality. The influence of switching off the cryo-vacuum pump on the sub-divertor pressure is rather modest and a weak increase of the neutral pressure in the sub-divertor is expected. Correlations of the sub-divertor pressure with the total incoming particle flux as well as the individual pumped flux at each of the AEH and AEP sections have been deduced. Moreover, it has been demonstrated that the influence of the incoming neutral particle flux on the albedo coefficient at the AEH and AEP pumping gaps is rather weak. All the above numerical findings will actively support the optimization of the W7-X particle exhaust, in view of future experimental campaigns.

DSMC method↗
DOE OSTI2024

Froggatt-Nielsen meets the SMEFT

We study the matching of Froggatt-Nielsen theories of flavour onto the Standard Model Effective Field Theory (SMEFT), upon integrating out a heavy Beyond-the-Standard-Model (BSM) scalar ‘flavon’ whose vacuum expectation value breaks an Abelian flavour symmetry at energies Λ FN well above the electroweak scale, Λ FN > Λ SM . We include matching contributions to the infrared d SM = 6 (Warsaw basis) SMEFT sourced from ultraviolet contact terms suppressed up to order 1/${\Lambda}_{\textrm{UV}}^2$ in the Froggatt-Nielsen Lagrangian, where Λ UV > Λ FN is an arbitrary ultraviolet scale where further unspecified BSM particles are dynamical. This includes tree-level (one-loop) ultraviolet diagrams with d FN = 6 (5) effective vertices. We first do so with a toy model, but then generalize our findings to arbitrary Frogatt-Nielsen charges. Our results indicate a rich and non-trivial signature of Froggatt-Nielsen theories on the (otherwise) model-independent operators of the SMEFT, and we briefly speculate on extending our analysis to broader classes of BSM flavour models, e.g. non-Abelian and/or gauged theories. We thus take an important step towards determining how to use rapidly developing theoretical and experimental SMEFT technologies to gain unambiguous insight into the SM’s longstanding fermion flavour puzzle.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Highly functional microspheres facilitating Diels–Alder network formation

Introducing particles to dynamic covalent networks is a common approach to improve their performance. However, network formation can be impacted by their size and functionality. The influence can be predicted by common theories for small molecular precursors, but it is unclear whether they are applicable to precursors bearing numerous reactive groups and micrometer-scale dimensions. In this work, an experimental study was undertaken using dynamic covalent networks formed by the Diels–Alder reaction between furan and maleimide groups. The gelation behavior of the Diels–Alder networks was studied using rheometry to track their network formation at 40 °C with varying maleimide-functionalized microsphere loading. The highly functional microspheres can interact with the furan precursor, aiding in the formation of the Diels–Alder networks. A 5 wt% microsphere sample can reduce the gelation time by 23% and facilitate network formation in an unbalanced stoichiometry near the critical composition to form a percolating network.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Dynamic evolution of ultracold electron beams from nanostructured cathodes

Dynamic Coulomb expansion of dense, nonuniform particle beamlets can lead to causticlike formations in the charge density profile of the resultant beam. Such features only occur for cold beams where thermal diffusion of the particles is minimized. These phenomena have been observed experimentally for select cases with ion beams but not yet for electron beams as the electron dynamics occur over far faster timescales. We simulate the interaction of electron bunches while varying the initial transverse temperature and density profiles to determine the thresholds that characterize this pattern formation. Furthermore, we extend the simulations to geometric arrangements that are more pertinent to the nanotip cathode application and consider the effects of asymmetries and the impact of a low-density halo on the overall process. The simulations are conducted using a previously documented high-fidelity algorithm for collisional particle dynamics. These studies identify the temperature and density thresholds required for caustic formation and provide guidance for optimizing the design of nanoscale structured cathodes. We also demonstrate that the correlation between the final density patterns and the underlying beam parameters enables a virtual diagnostic tool for measuring ultralow emittance beams solely based on a transverse charge density profile.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Modeling powder spreadability in powder-based processes using the discrete element method

Powder-bed fusion (PBF) processes refer to a subset of Additive Manufacturing (AM) techniques where powder is spread on the build-plate before melting (by a laser or electron beam). While PBF processes are attractive due to their ability for realizing complex structures that are either difficult or impossible to create through conventional means, the parts fabricated with these techniques can exhibit defects such as pores, inclusions, and excessive surface roughness. To minimize these defects, much research has been dedicated towards process maturation by optimizing laser or electron beam parameters. However, these developmental efforts typically do not address the recoating process where achieving dense and uniform layers of powder is a necessity for ensuring process repeatability and part quality. While the recoating process can be studied through experimentation, the dynamics of particle movement are difficult to analyze experimentally. Therefore, here, in this study, powder spreading in PBF was simulated through the Discrete Element Method (DEM) to elucidate the mechanisms that control powder-bed quality. Utilizing the Buckingham Pi theorem, a dimensionless metric referred to as the spreading index is developed that combines powder-bed density, roughness, and particle size to assess the quality of powder layers. The formulated spreading index is then related to several dimensionless quantities that provide insight into the mechanisms dominating powder spreading in PBF. The DEM simulations conducted in this work focused on the scenario where powder is spread onto an existing powder bed and revealed that a reduction in the recoating velocity causes an increase in the spreading index while little to no impact on the spreading index was observed when varying layer thickness from 30 μm to 75 μm.Particle size effects on the powder-bed quality were also investigated.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Semi-inclusive deep-inelastic scattering on a polarized spin-1 target. I. Cross section and spin observables

We develop the theoretical framework for semi-inclusive deep-inelastic scattering on a polarized spin-1 target and apply it to scattering on the polarized deuteron with spectator nucleon tagging. In Part I (this article) we present the general form of the semi-inclusive cross section and polarization observables for the spin-1 target. A relativistically covariant formulation in terms of four-vectors and invariant polarization parameters is employed. The target polarization is described by a spin density matrix with vector and tensor polarization. The spin and azimuthal angle dependence of the semi-inclusive cross section is derived and parametrized in terms of invariant structure functions. To validate the result, the structure functions are expressed as photon-target helicity amplitudes with known symmetry properties. The expressions presented here are kinematic (no assumptions about particle production dynamics) and valid in all regions of the deep-inelastic final state (current and target fragmentation regions). In Part II (following article), we consider deep-inelastic scattering on the polarized deuteron with spectator nucleon tagging as a special case of target fragmentation. The semi-inclusive structure functions are computed by separating nuclear and hadronic structure, and the polarization observables are explored as functions of the tagged nucleon momentum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Focusing of relativistic electron beams with permanent magnetic solenoid

Achieving strong focusing of MeV electron beams is a critical requirement for advanced beam applications such as compact laboratory x-ray sources, high gradient accelerators, and ultrafast electron scattering instrumentation. To address these needs, a compact radially magnetized permanent magnetic solenoid (PMS) has been designed, fabricated, and tested. The solenoid provides a compact and inexpensive solution for delivering high axial magnetic fields (1 T) to focus MeV electron beams. Field characterization of the solenoid demonstrates good agreement with analytical models, validating the PMS design. The electron beam test employs a high-brightness photoinjector to study the focusing properties of the PMS. The results indicate a focal length of less than 10 cm and a significant reduction in beam size with small spherical aberrations. Two application cases are evaluated: angular magnification in ultrafast electron diffraction setups and strong focusing for Compton scattering or other microfocus uses.

Electron diffraction↗
DOE OSTI2025

Calculation of rf-induced temporal jitter in ultrafast electron diffraction

A significant contribution to the temporal resolution of an ultrafast electron diffraction (UED) instrument is arrival time jitter caused by amplitude and phase variation of radio-frequency (rf) cavities. In this paper, we present a semianalytical approach for calculating rf-induced temporal jitter from klystron and rf cavity parameters. Our approach allows fast estimation of temporal jitter for MeV-UED beamlines and can serve as a virtual timing tool when shot-to-shot measurements of rf amplitude and phase jitters are available. A simulation study for the SLAC MeV-UED instrument is presented, and the temporal resolution of several beamline configurations is compared.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Resonant Emittance Mixing of Flat Beams in Plasma Accelerators

Linear colliders rely on high-quality flat beams to achieve the desired event rate while avoiding potentially deleterious beamstrahlung effects. Here, we show that flat beams in plasma accelerators can be subject to quality degradation due to emittance mixing. This effect occurs when the beam particles' betatron oscillations in a nonlinearly coupled wakefield become resonant in the horizontal and vertical planes. Emittance mixing can lead to a substantial decrease of the luminosity, the main quantity determining the event rate. In some cases, the use of laser drivers or flat particle beam drivers may decrease the fraction of resonant particles and, hence, mitigate emittance deterioration.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Laser-plasma ion beam booster based on hollow-channel magnetic vortex acceleration

Laser-driven ion acceleration provides ultrashort, high-charge, low-emittance beams, which are desirable for a wide range of high-impact applications. Yet after decades of research, a significant increase in maximum ion energy is still needed. This paper introduces a quality-preserving staging concept for ultraintense ion bunches that is seamlessly applicable from the nonrelativistic plasma source to the relativistic regime. Full three-dimensional particle-in-cell simulations prove robustness and capture of a high-charge proton bunch, suitable for readily available and near-term laser facilities.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Opportunities for gas-phase science at short-wavelength free-electron lasers with undulator-based polarization control

Free-electron lasers (FELs) are the world's most brilliant light sources with rapidly evolving technological capabilities in terms of ultrabright and ultrashort pulses over a large range of photon energies. Their revolutionary and innovative developments have opened new fields of science regarding nonlinear light-matter interaction, the investigation of ultrafast processes from specific observer sites, and approaches to imaging matter with atomic resolution. A core aspect of FEL science is the study of isolated and prototypical systems in the gas phase with the possibility of addressing well-defined electronic transitions or particular atomic sites in molecules. Notably for polarization-controlled short-wavelength FELs, the gas phase offers new avenues for investigations of nonlinear and ultrafast phenomena in spin-orientated systems, for decoding the function of the chiral building blocks of life as well as steering reactions and particle emission dynamics in otherwise inaccessible ways. This roadmap comprises descriptions of technological capabilities of facilities worldwide, innovative diagnostics and instrumentation, as well as recent scientific highlights, novel methodology, and mathematical modeling. The experimental and theoretical landscape of using polarization controllable FELs for dichroic light-matter interaction in the gas phase will be discussed and comprehensively outlined to stimulate and strengthen global collaborative efforts of all disciplines. Published by the American Physical Society 2025

Ilchen, Markus↗
DOE OSTI2024

Advanced fuel fusion, phase space engineering, and structure-preserving geometric algorithms

Non-thermal advanced fuel fusion trades the requirement of a large amount of recirculating tritium in the system for that of large recirculating power. Phase space engineering technologies utilizing externally injected electromagnetic fields can be applied to meet the challenge of maintaining non-thermal particle distributions at a reasonable cost. The physical processes of the phase space engineering are studied from a theoretical and algorithmic perspective. It is emphasized that the operational space of phase space engineering is limited by the underpinning symplectic dynamics of charged particles. The phase space incompressibility according to the Liouville theorem is just one of many constraints, and Gromov's non-squeezing theorem determines the minimum footprint of the charged particles on every conjugate phase space plane. In this sense and level of sophistication, the mathematical abstraction of phase space engineering is symplectic topology. To simulate the processes of phase space engineering, such as the Maxwell demon and electromagnetic energy extraction, and to accurately calculate the minimum footprints of charged particles, recently developed structure-preserving geometric algorithms can be used. The family of algorithms conserves exactly, on discretized spacetime, symplecticity and thus incompressibility, non-squeezability, and symplectic capacities. The algorithms apply to the dynamics of charged particles under the influence of external electromagnetic fields as well as the charged particle–electromagnetic field system governed by the Vlasov–Maxwell equations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Synthesis of UO 2 nanoparticles via coulometric titration: influence of electrolytes and ligands on synthesized particle properties

Here, this study investigates the controlled synthesis of uranium oxide nanoparticles (UO 2 NPs) via coulometric titration under ambient conditions, focusing on the impact of electrolyte anions, salt concentrations, and strongly complexing ligands on particle formation and properties. Using dilute solutions of mineral acids (HNO 3 , HCl, and HClO 4 ), we demonstrate that the choice of electrolyte anion affects particle size, polydispersity, and surface charge. Particle characterization using dynamic light scattering and transmission electron microscopy shows that particles synthesized in perchlorate are largest and show a high degree of polydispersity. In comparison, particles synthesized in chloride are smaller and more uniform in size. Synthesis in nitrate yields a wide variety of particle sizes, with the major fraction (>65 %) having a smaller size than that obtained in the other two electrolytes. The presence of more strongly coordinating ligands such as sulfate and acetate modulate hydrolysis and condensation reactions, with sulfate suppressing nanoparticle formation across a wide concentration range ([SO 4 2- ] > 5 mM) and acetate enabling stable colloidal suspensions at [HOAc] ≤ 0.1 M. Synthesis in concentrated electrolytes (2 M NaNO 3 , NaCl, or NaClO 4 ) accelerates reaction kinetics but introduces challenges, as particles showed increased polydispersity and aggregation, and were more prone to oxidation. Electrolyte effects on actinide oxide nanoparticle formation are discussed and a short comparison to established nanoparticle syntheses is drawn. This work underscores the importance of tailoring synthesis parameters to achieve desired nanoparticle properties, providing valuable insights for optimizing UO 2 NP production for various applications.

Actinide hydrolysis↗
DOE OSTI2025

Preliminary study of auto-differentiation algorithm in beam dynamics with stochastic process

Modern particle accelerator optimization requires sophisticated computational methods to address the inherently stochastic nature of beam dynamics. This research develops a framework applying AD to SDEs that specifically addresses beam dynamics challenges in particle accelerators, focusing on accurately modeling and optimizing beam behavior in regimes dominated by stochastic processes. By incorporating key physical phenomena such as synchrotron radiation, wakefield effects, and quantum excitation, the framework aims to provide auto differentiation on the figure of merit of the phase space evolution and beam dynamics. The methodology will enable effective optimization method in a dynamic system with stochastic process.

Accelerator Physics↗
DOE OSTI2025

Testing strong-field QED with the avalanche precursor

A two-beam high-power laser facility is essential for the study of one of the most captivating phenomena predicted by strong-field quantum electrodynamics (QED) and yet unobserved experimentally: the avalanche-type cascade. In such a cascade, the energy of intense laser light can be efficiently transformed into high-energy radiation and electron–positron pairs. The future 50-petawatt-scale laser facility NSF OPAL will provide unique opportunities for studying such strong-field QED effects, as it is designed to deliver two ultra-intense, tightly focused laser pulses onto the interaction point. In this work, we investigate the potential of such a facility for studying elementary particle and plasma dynamics deeply in the quantum radiation-dominated (RD) regime, and the generation of QED avalanches. With three-dimensional particle-in-cell simulations, we demonstrate that QED avalanche precursors can be reliably triggered under realistic laser parameters and layout (namely, focusing f/2, tilted optical axes, and non-ideal co-pointing) with the anticipated capabilities of NSF OPAL. We demonstrate that seed electrons can be efficiently injected into the laser focus by using targets of three types: a gas of heavy atoms, an overcritical plasma, and a thin foil. A strong positron and high-energy photon signal is generated in all cases. The cascade properties can be identified from the final particle distributions, which have a clear directional pattern. At increasing laser field intensity, such distributions provide signatures of the transition, first, to the RD interaction regime, and then to a QED avalanche. Our findings can also be used for designing related future experiments.

Lasers↗
DOE OSTI2026

Revealing multiscale competing processes in the solid-state synthesis of single-crystalline layered oxide positive electrodes

Solid-state synthesis involves a web of coupled chemical reactions and physical changes that unfold across multiple scales. Efforts to fine-tune its parameters have historically followed heuristic, trial-driven workflows that demand significant time and resources. In this study, we aimed to open this black box by employing multiscale in situ synchrotron imaging and diffraction. Using LiNi 0.5 Mn 0.3 Co 0.2 O 2 battery positive electrode material as a model system and Ba-based sintering aids, we reveal dopant segregation, intergranular mass transport, and porosity evolution as key drivers of single-crystalline particle formation. Notably, we uncovered a dynamic competition between particle-level grain coalescence and atomic-scale cation disordering, both of which are thermally activated yet have opposing impacts on battery performance. These findings highlight the coupled, multiscale nature of structure development and offer a mechanistic basis for optimizing the solid-state synthesis process. This framework provides a path toward more controlled, efficient, and scalable production of high-performance battery positive electrode materials.

36 MATERIALS SCIENCE↗